Related
Howdy all... This is a Great Forum, I have really enjoyed it, and I thank all who have contributed their hard work making ROMs for HTC's.
I am not a Programmer, Just a Physician.... so I have a question.
I like so many others have flashed numerous ROMS to my 8525 searching for a stable, fast, dependable operating system for my phone.
Now that I have flashed so many ROM's, I think my phone is really confused. With each new ROM, it starts out fine, then the phone turns schizophrenic.... Things flash on and off and I can not control them. Sometimes the screen just locks up and even with a hard rebooting and pulling the battery... nothing cures it.
My question.... Is there a way to purge the system completely, start fresh? Like formating a hard drive to start fresh? I realiize the HTC doesnt have a hard drive, so that is out of the question. But is there a way to do the same so that the next ROM I flash will be somewhat stable?
Any help will be most appreciated.
Thanks to all Developers that are the Doctors to HTC's the same way that Physicians are to humans.
Doc
drcharliedavis said:
Howdy all... This is a Great Forum, I have really enjoyed it, and I thank all who have contributed their hard work making ROMs for HTC's.
I am not a Programmer, Just a Physician.... so I have a question.
I like so many others have flashed numerous ROMS to my 8525 searching for a stable, fast, dependable operating system for my phone.
Now that I have flashed so many ROM's, I think my phone is really confused. With each new ROM, it starts out fine, then the phone turns schizophrenic.... Things flash on and off and I can not control them. Sometimes the screen just locks up and even with a hard rebooting and pulling the battery... nothing cures it.
My question.... Is there a way to purge the system completely, start fresh? Like formating a hard drive to start fresh? I realiize the HTC doesnt have a hard drive, so that is out of the question. But is there a way to do the same so that the next ROM I flash will be somewhat stable?
Any help will be most appreciated.
Thanks to all Developers that are the Doctors to HTC's the same way that Physicians are to humans.
Doc
Click to expand...
Click to collapse
Well if it gets too confused make sure you get a shipped ROM handy at hand and don't forget to follow the doctor's orders.
Thanks
I would like to thank you for your quick response. I have downloaded the ATT ROM and the correct Radio as well as the instructions.
I will begin lifesaving techniques to my HTC and post the results.
Thanks Again, You are the Greatest!
Doc
Follow Up
Hi Zocster and fellow forum members,
Well I followed your instructions to the letter, only to discover that some of the tools do not work on a laptop that has Vista. So after fighting with that all day, I just let it rest a while and will tackle it again tomorrow.
Oh one question... what is the thing in the upper right corner of the phone, it has 3 diagonal liines and a triangle, when it opens it shows what programs are running. Is there a way to turn that option off? Also what can cause the touch screen to work some times and not work at other times? It is really frustratiing..
Any advise will be most appreciated.
Thanks
Doc
firstly to the point of saying you have problems flashing in vista, download sp1 install it and all other updates. Then download the latest version of WMDC(windows mobile device center) and you shouldnt have any problems, i have vista and have no trouble whatsoever flashing in vista.
The thing with the the 3 diagona lines and triangle that you mention is a task manager to kill programs that are running to allow you to free memory on the phone and allow it to run faster. Depending on what rom you flashed it will either be in add /remove programs or hard coded into the rom. If its in add/remove it will be call htc task manager just remove it. If its cooked into the rom the only way of removing it is to flash another rom. I cant see that being part of your problem though.
The touch screen problem might not be a screen problem per sa, your device maybe just running slow and the phone freezes temporarily to allow to finish what it is doing? have you tried or even realised what the page pool size is of the roms you are flashing? try flashing one with a 8mb page pool and see if that runs better. There is a tool to change page pool size floating about on here
I would though flash a stock(operator) rom first though then flash another rom. Try pda corners latest rom thats pretty fast, i am not saying its the best ,but it is quick and i like it
drcharliedavis said:
Is there a way to turn that option off?
Click to expand...
Click to collapse
scousemartin said:
If its cooked into the rom the only way of removing it is to flash another rom.
Click to expand...
Click to collapse
well doc, as you want to turn this option off, the program is usually called "Task Manager" or "HTC Task Manager" and you can find it in "Settings -> [Tab]System ->Task Manager " and you can switch it off by going to the [Tab]Button and to un-tick the option "Enable Quick menu on Today screen".
another way to go to its settings is by clicking on it and then clicking on the "wrench" symbol.
concerning Vista issues, I never had a problem with it as i was using Vista before publishing SP1 and I did the SuperCID, HardSPL and the first upgrades under Vista... anyways, on Hermes wiki pages you can check solution#24 of Hermes Upgrade FAQ
good luck
i dont want to be a pain in the ass can someone link me a tutorial on how to flash roms im very intrested into flashing to a 6.5 rom will read up myself just cant find a stright up tutorial tyia guys btw have a sprint htc touch
ohthebaby said:
i dont want to be a pain in the ass can someone link me a tutorial on how to flash roms im very intrested into flashing to a 6.5 rom will read up myself just cant find a stright up tutorial tyia guys btw have a sprint htc touch
Click to expand...
Click to collapse
OK, as I have a Sprint Touch as well... Here goes...
First go HERE and READ the hell outta it until you have it step by step (BTW use the 2.31 unlocker regardless about the GPS thing)
OK, now that youve read that (happy dance time)
Download the 2.31 Unlocker and a WinMO 6.5 ROM personally I suggest this ONE as it is one I use
And make sure to download the DCD Sprint Carrier cab and copy it to your SD card as you may need this after the flashing is done (will get back to this tasty morsel later)
OK, now you have an Unlocker and a ROM - now what, hmmmm
Use WinRAR and extract both the files into separate folders
Press and hold the Power button+Camera Button and Stylus in the reset hole until the 3 color screen comes up and it says serial, now plug in your cable and it should change to USB
can you taste the rainbow and it is over the land of USB?? great, now go into the Unlocker folder you created and doubleclick on the RomUpdateUtility.exe (going to be called RUU.exe from this point on)
Follow the steps on the desktop monitor (you might get some errors about sleep4.exe - dont worry about it, just keep hitting enter and it will go away after the 4th or so time
At some point the program is going to tell you to disconnect the phone, sounds scarey doesnt it, losing the connection and all - dont be, be a brave little soldier and disconnect it and count to 10, cant do that, get some help in getting there, its really that important LOL once you (or your friend) gets to 10 plug it back in, does it say USB again? good!! happy dance AFTER you hit a key on the keyboard per the on screen directions
its going to eventually reboot, let it and it will be unlocked, let it start up and do its thing, when its done - go ahead and go back into bootloader mode again (remember power+camera+stylus twister move you did earlier, its back to that again) with the cable disconnected and it had better say SERIAL again.. now go ahead and plug in the cable and it should change to USB
Now go into the ROM folder and double click the RUU.exe here ... and follow the directions that come up on the screen...
Once its done and the phone reboots, wait... wait some more.. still keep waiting.. no not yet ... stop touching it.. it wont help pacing.. just be patient... oh look an Orange screen, ok here comes some fun
Follow the drections to go through the setup, dont worry about it being to accurate and all as it is about to be erased anyway... let the autorun happen once windows starts and it will reboot on its own again - yes it really IS a smartphone isnt it LOL
OK, as it is booting up again when there is a black screen - press and hold the red button+green button+stylus in reset hole (known as a Hard reset) until the screen turns gray - follow the directions again (save you some time "press the Enter key" thats the big silver button in the center of the buttons LOL) and when the progress bar moves all the way to the right, press the end key (the green one)
Again, it will restart (told you it was smart) and now go ahead and do the setup and customizations and do them right this time as your hanging onto them this time (sounds weird but if you dont hard reset after flashing it flying monkeys will swoop in and take your phone and your little dog toto too)
OK, now remember that DCD Sprint Carrier Cab, you do, fantastic .. so to the storage card where you copied it to - you didnt forget that step did you??? good I knew my faith in you would pay off, tap on it and run it - it will install all the Sprint goodies to make your life easy, and your sex life better and even improve that certain area of a .. wait sorry wrong channel again.... just go ahead and tap it, run it and reboot
now you have a Sprint 6.5 Custom ROM
Enjoy
Detroit Doug
dude f****** grt lol wow thats a tutorial and a half ty ima try it now
Detroit_Doug,
In NFS Fan's v 6.5 ROM, which GPS registry cab should I use for MetroPCS?
Also, is it true that MMS is not supported on this ROM version?
Will this update my radio to the latest version (Radio version 3.42.30) so that GPS is enabled? I was having GPS issues on the latest Sprint stock ROM after flashing to Metro.
awesome, thank you! heheh, flying monkeys.
anithinks said:
Detroit_Doug,
In NFS Fan's v 6.5 ROM, which GPS registry cab should I use for MetroPCS?
Also, is it true that MMS is not supported on this ROM version?
Will this update my radio to the latest version (Radio version 3.42.30) so that GPS is enabled? I was having GPS issues on the latest Sprint stock ROM after flashing to Metro.
Click to expand...
Click to collapse
Yes MMS IS supported on the ROM, but per some steps and depending on your Provider, well that can be the tricky part as they can be a PITA at times
As far as MetroPCS - I really dont know, I personally go to the thread of MFSFANs ROM and do a search through it for MetroPCS (there are a few of you trying to take over the world - I aint skeered though) but there is some info there, I just cant remember every carrier and every issues for every phone - I have my own plans on taking over the world as well you know (are ya skeered???) come on pinky, time to put my plan into action
Detroit Doug
EDIT: Here is the link for MetroPCS - its for the Titan, but ask the person that started the thread - the cab shouldnt matter as it is provisioning data and the like - again ask the posted on the thread, I dont know anything about it - simple search found this as well
http://forum.xda-developers.com/showthread.php?p=3609082#post3609082
could you find the one for USCC & what does the cab do?
Viper Matrix Wireless said:
could you find the one for USCC & what does the cab do?
Click to expand...
Click to collapse
If your referring to "what does a carrier cab do" it installs various settings and progs and provisioning data to help you connect to your network for phone, data, internet, GPS, aGPS, etc
As far as finding it - search can be your friend - I dont even know if there is one for USCC or MetroPCS - find whatever carrier is similar/compatible and use it
Detroit Doug
EDIT - amazing a search for USCC Carrier CAB found lots of posts - 5th post through and the preview gave the link you need directly
http://sites.google.com/site/victorbush/htc-6800-1/epst-data-settings
Hi all,
Thanks to those who have helped along the way. None of this is my work, I am just putting it all in the one place for those who are in a similar situation as me - wanting to do get onto JG5, but not knowing how. Hopefully you can follow along!
This is the first time I've ever done anything to an Android phone, so consider me a noob! Here's all the files I used - multiupload.com/66CNCCTE4W (you will need to copy and paste the link into your address bar as I can't post links yet
Before you start, I did this on my Australian Samsung Galaxy S, so I'm not sure how different your model is!
Before starting, unzip the downloaded file above to your hard drive, and extract it to an easy to find folder - I'd suggest somewhere on your desktop.
1. Open the Odin3_v1.0 folder
2. Run Odin3_v1.0.exe program
3. Select the PIT, PDA, Phone and CSC files by clicking on the button, then locating the file in the I9000XWJG5 folder
a) PIT - s1_odin_20100512.pit
b) PDA - CODE_I9000XWJG5.tar
c) PHONE - MODEM_I9000XXJG1
d) CSC - CSC_I9000OXXJG4.tar
4. Remove the External MicroSD Card and the Sim Card
5. Turn the phone off
6. Get into download mode by pressing volume down + home key + power button
7. Connect the USB Cable from phone to computer
8. Wait for the drivers to be automatically installed.
9. Once drivers are fully installed, click START in Odin.
And that should be it!
P.s. I had to manually select my Network by going into Settings, Wireless and network, Mobile networks, and then selecting the Network (for me it was Optus). You will probably want to select Swype as the default input. To do this, press and hold a text input field, and press input and select Swype.
I hope this helps - please let me know how it goes for you!
*(Edited to include only flashing phone - I originally thought you had to root it first!)
You don't need to do step one and two.
lol,why bother about root ur device when u can straight away flash it like step 3??
Why do we need step one and two before ?
Since we are going to flash new rom and will need to do those again ????
Didnt work
So i tried to flash my SGS last night but it didnt turn out so well.
put all the bits and bobs in (.pit pda phone and modem) and then connected the phone in Download mode, seemed to connect to Odin, ID:COM 0:[COM20], clicked start, it seemed to be working so went to check on dinner and when i came back it didnt seem to be doing much, screen on the phone was blank and odin looked like it was tring to move across factoryfs.rfs, i look in the CODE file and saw that the factoryfs.rfs file was huge so thought id just leave it and wait. but nothing left it for 4-5 hrs then left the comp on all night when i cam back it was in the same spot but said removed and the phone was showing a phone then triangel with a ! inside the computer. so i unpluged it took out the bat and put it back tried turning it on, same thing, turned it off again and put into download mode seems to work but didnt get a chance to play with it at home, at work now and cant do it because it asks for admi privileges to install the drivers, so ill wait till im home again. anyone got ideas of what it might be? should i have connected to port 7?
Really? There ya go. Told you I was a noob! Sorry to confuse people. I have edited the original post so it only shows the flashing part.
#4 is not needed.
BTW: your tutorial is already stickied in the big faq (post 2).
I think alot of noobs will find this very useful. It's easier to follow for those who are flashing for the first time, i'm sure others wil appreciate your effort.
ZacJ said:
Really? There ya go. Told you I was a noob! Sorry to confuse people. I have edited the original post so it only shows the flashing part.
Click to expand...
Click to collapse
Hey Zac,
Don't worry if the steps are already in post # 2. I find yours better and more direct. More importantly, your phone is also from Australia, same as mine.
Thank you for taking the trouble to post this. I've been helped. I'm a bigger noob I guess
The only problem is that I don't seem to be able to download it. It stops after a few bytes. Know of any alternative links?
Edit: On the other hand, after going through some of the comments on threads related to JG5, all the problems are still there, so I don't see any real advantage over JG3. Will stick to this, since I'm about to get a replacement for my phone soon.
Thank you!! Thank you!! Thank you!! Thank you!! Thank you!!
I really want to thank you 4 this!! Damn you're the man!! This fixed my broked SGS immediately!! I can't thank you enough my best friend 4 ever!!
How do i get Superuser in to this?? And can i use Lagfix 2.0 too?? Please answer to me..i'm so so so damn gr8ful about all your hard work! Do i have to root my SGS again and where i can find the latest file update.zip which works with this your version?? I have already update.zip but it's kinda old file though.
Like i said earlier:
Thank you!!
Thank you!!
Thank you!!
Thank you!!
Thank you!!
PS: I gave 5 stars !!
Dude don't stress!
For rooting/superuser read my tutorial!
http://forum.xda-developers.com/showthread.php?t=728754
After that you can either apply One click lagfix or the CFLagFix 1.80!
I would recommend CFLagFix 1.80!
Buy me a beer if it works
LauncherPro problems
Hiya!!
U have any idea when i installed this jg5 my launcherpro won't work anymore at all, it just force closes all the time and i can't open my phone at all?? Why this is happening??
How do install this but still use LauncherPro??
( Though it works when i install it but immeadiately when i try ty restart my LauncherPro it starts to force close 24/7)
When i did a factory reset it didn't make it completely, it left something in in phone about this jg5...maybe that's why my LP is not working anymore...
Sorry but i'm a noob so don't judge me, i have a question now, where i can get "Stock 2.1 Eclair"?? I have now FRF91.372 2.2 in my phone it works like ****!! I don't even get LauncherPro work without continious force closes...i want that firmware where LP works without any force closes!!
Please help a noob...please, now i know how to use Odin, cause i have flashed already 3 times. But all the firmwares what i've tried have sucked.
PS: Is there any way i can do a raw clean for my SGS before install new firwmare, i ask cause i want to SGS completely empty before i install new firmware, is this possible?? I heard that if you swype your SGS empty new firmware will work much better...but this is just a rumour though
Gothic Touch said:
Sorry but i'm a noob so don't judge me, i have a question now, where i can get "Stock 2.1 Eclair"?? I have now FRF91.372 2.2 in my phone it works like ****!! I don't even get LauncherPro work without continious force closes...i want that firmware where LP works without any force closes!!
Please help a noob...please, now i know how to use Odin, cause i have flashed already 3 times. But all the firmwares what i've tried have sucked.
PS: Is there any way i can do a raw clean for my SGS before install new firwmare, i ask cause i want to SGS completely empty before i install new firmware, is this possible?? I heard that if you swype your SGS empty new firmware will work much better...but this is just a rumour though
Click to expand...
Click to collapse
All the ROMs that are released by Samsung themselves are stock ROMs, e.g. JG5 is a Stock Eclair 2.1 ROM.
As I wrote the guide I realized the files, scripts, and images are scattered through multiple threads, which makes finding what you need difficult, even from a main thread (the guide for example). This was compounded even more when I was writing the CM9 Install Guide for the CyanogenMod Wiki and listed the commands themselves, it became huge, intimidating, and looks extremely daunting, I can only imagine what a new flasher must think seeing it! And and so I decided perhaps I can fix this, and with that I present to you...
The A100 Flashing Toolkit!
What is it?
A single zip file that, when unzipped, contains EVERYTHING you need, ADB, fastboot, scripts, CWM recovery image, everything you need to take your stock ICS A100 through rooting, unlocking the bootloader, and flashing CWM recovery (twrp coming soon)!
How is it used?
Its a set of 6 PC scripts, 3 for windows users (.bat) and 3 for linux users (.sh). Run in order from the same folder, and you can just click and run, reboot, click and run, reboot, click and run, install custom rom, done!
You MUST already be on ICS! This is not for HC, if you are on HC update to ICS FIRST!
Instructions
Make sure you are on ICS! Read the bold red letters above! You have been warned! You should already have installed the Acer USB drivers for ADB to work.
Ok, now you're on ICS....right?
Download and unzip the file to whatever folder you can remember, for example c:\acer or ~/acer.
Open your file manager of choice and browse on over to where you unzipped the files, and get ready.
Windows
Right click on A100-root-win.bat and select Run as Adminitrator.
Once that is finished, let your tablet reboot.
Once it's rebooted, right click on A100-unlock-win.bat and select Run as Administrator.
Once this finishes, let the tablet reboot again (the script will tell you what's happening)
Once it's rebooted, right click on A100-recovery-win.bat and select Run as Administrator.
Allow it to finish, it'll reboot a couple times.
Half the time it reboots into recovery, other reboots into system, not sure why it happens.
If it boots into recovery, go ahead and make a full backup, might as well.
If it boots into system, reboot into recovery and make a full backup, might as well.
At this point, you can now wipe and install a custom ROM, see the A100 Guide in General for ROMs and instructions on this.
Linux
Execute A100-root-linux.sh and allow it to run.
Once that is finished, allow tablet to reboot.
Exectute A100-unlock-linux.sh and allow it to run.
Let the tablet reboot
Execute A100-recovery-linux.sh and allow it to run.
It'll either reboot into recovery, or system, it does one or the other for some reason.
If rebooted into recovery, make a full backup.
If rebooted into system, reboot into recovery and make a full backup.
Wipe and install a new custom ROM, see the A100 Guide in General for ROMs and instructions on this.
How to boot into recovery
There's a few ways, 1 way is an app like quick boot, you can use adb by typing adb reboot recovery or you can do it manually.
Power off the tablet.
Press and hold the volume - button, closest to power and lock switch.
Holding volume - press and hold Power.
Hold until the screen says Booting recovery kernel then let go.
You should be in recovery, either CWM, TWRP, or stock, whatever you have installed.
As always I am open to suggestions, advice, or reports! Feel free to post up or PM me with any issues, questions, bugs, or ideas!
Download
A100 Flash Toolkit 1.1 7-16-12
Now featuring the correct bootloader!
Thanks to smokku for pointing this out.
Who do we thank for this package?
ZeroNull: Alot of the scripting is based on his work, and borrows his ADB and fastboot executables.
ptesmoke: Uses his CWM recovery.img file
CyanogenMod Iconia Team: For allowing me the chance to write for the Wiki, and realizing this NEEDED to be done.
Anyone else I'm forgetting, I'm sorry I will add you as soon as I remember (feel free to drop me a note!)
Sounds great, many thanks.
Thanks for all you hard work and patience.
a100 flash program
After several hours trying, having trouble with some of the batch files. Appears some file names called in .bat different than actual file names, also had to invoke adb from Command prompt window, wouldn't work from windows file manager. Followed instructions but process is breaking down in second batch file. After correcting file names, batch file runs but recovery.img is failing. Need help figuring this out.
Esat
Birbey said:
After several hours trying, having trouble with some of the batch files. Appears some file names called in .bat different than actual file names, also had to invoke adb from Command prompt window, wouldn't work from windows file manager. Followed instructions but process is breaking down in second batch file. After correcting file names, batch file runs but recovery.img is failing. Need help figuring this out.
Esat
Click to expand...
Click to collapse
Oh wow OK I'll take a look I must have mixed everything up. My desktop is littered with files from all these projects. I'm sorry about that I should have double checked everything before I uploaded it. If the called files are different then the scripts it must be the old version mixed with new scripts or something. I should have it squared away sometime tonight/tomorrow morning.
Edit: I'm assuming by saying command prompt you use windows, the a100-root-win.bat file looks fine, was this one giving any issues?
I'm checking the second and third now for whatever is going on.
Tapatalked from my Galaxy S II.
Fixed.
I'm not able to unlock my a100, when it enters boot loader and I press volume - and + nothing happens, any advice? Thanks a lot.
Sent from my A100 using XDA
diegof18 said:
I'm not able to unlock my a100, when it enters boot loader and I press volume - and + nothing happens, any advice? Thanks a lot.
Sent from my A100 using XDA
Click to expand...
Click to collapse
You have to be FAST when it gets there, it times out in like half a second it seems.
When you run it, have the tab in your hand, fingers on volume - and volume + (volume - is next to the lock switch). As soon as you see the screen change, hit volume - then volume +. It takes a few tries usually. It'll just sit there until you reboot afterwards.
Hi, I was wondering, since I just rooted yesterday (got this tab last friday) should I skip the script for rooting and simply run the other two or do I have to run the root script anyways? by the way Im having some real weak reception from this tablet, like 2 bars only and thats when standing about 5 feet from the router, Im willing to follow this procedure in order to try one of the custom roms to see if the wifi weak signal goes away (Ive tried most of the things there are to attemp to fix this, including messing around with my router) do you know if any one has successfully fixed this with a custom rom? if so which one? thanks in advance and sorry for (kinda) hiijacking the thread.
elander said:
Hi, I was wondering, since I just rooted yesterday (got this tab last friday) should I skip the script for rooting and simply run the other two or do I have to run the root script anyways? by the way Im having some real weak reception from this tablet, like 2 bars only and thats when standing about 5 feet from the router, Im willing to follow this procedure in order to try one of the custom roms to see if the wifi weak signal goes away (Ive tried most of the things there are to attemp to fix this, including messing around with my router) do you know if any one has successfully fixed this with a custom rom? if so which one? thanks in advance and sorry for (kinda) hiijacking the thread.
Click to expand...
Click to collapse
Congrats on the purchase and welcome! You can skip over rooting if you already have rooted ICS. Not HC.
The weak wifi is pretty common, mine is weaker then any other devices I have, usually by a bar or 2. Custom roms won't fix it, I think they just have the power turned down on it. Its also possible there is a bad connection to the antenna internally. If you're very unhappy stop Modding now and return to stock and exchange for another unit or brand.
Any other questions feel free to ask.
Tapatalked from my Galaxy S II.
thanks for the info.
pio_masaki said:
Congrats on the purchase and welcome! You can skip over rooting if you already have rooted ICS. Not HC.
The weak wifi is pretty common, mine is weaker then any other devices I have, usually by a bar or 2. Custom roms won't fix it, I think they just have the power turned down on it. Its also possible there is a bad connection to the antenna internally. If you're very unhappy stop Modding now and return to stock and exchange for another unit or brand.
Any other questions feel free to ask.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
thanks for your fast reply, I was contemplating the idea of flashing some custom rom as a last resort before either opening up the tab's case to check for myself that everything was "wired right" as Im not too happy with the idea of sending this off to acer's as I live in the Dominican Republic and I'd hate to pay the overpriced shipping fee if it is something that I can fix by myself, but on the other hand I might as well break something new instead of fixing the wifi anthena, so I guess I'll have to claim the warranty and hope the wont send me another faulty unit (I've read somewhere some people had issues with the replacement units). Such a great little device cursed with bad QA. anyways, if I hard reset the tab it'll be back to stock right? (as of now the tab is running stock os with root access and the modified wpa_wifi apliance to gain access to adhoc networks) Thanks
elander said:
thanks for your fast reply, I was contemplating the idea of flashing some custom rom as a last resort before either opening up the tab's case to check for myself that everything was "wired right" as Im not too happy with the idea of sending this off to acer's as I live in the Dominican Republic and I'd hate to pay the overpriced shipping fee if it is something that I can fix by myself, but on the other hand I might as well break something new instead of fixing the wifi anthena, so I guess I'll have to claim the warranty and hope the wont send me another faulty unit (I've read somewhere some people had issues with the replacement units). Such a great little device cursed with bad QA. anyways, if I hard reset the tab it'll be back to stock right? (as of now the tab is running stock os with root access and the modified wpa_wifi apliance to gain access to adhoc networks) Thanks
Click to expand...
Click to collapse
I'm not sure, but I don't think resetting these puts them back to 100% if rooted, the root stays since it sits in /system. You'll have to manually remove SU then reset to get rid of the root, I think. Other option is restore through the update.zip method which should wipe /system. You could try a hard reset and see if it removes SU or not, it might.
Does the unlock script only works with the pre-release of ICS?
I cant get to the unlock mode... allways saying "xxxx .11 ics fast boot xxxxxxx"
NeO_CooL said:
Does the unlock script only works with the pre-release of ICS?
I cant get to the unlock mode... allways saying "xxxx .11 ics fast boot xxxxxxx"
Click to expand...
Click to collapse
Not quite clear on what you're asking, but as far as I know it should work on any version bootloader unless they changed it on some update, which wouldn't surprise me.
What is the whole message, and when is it occuring?
I have the latest ICS version availble thru OTA.
Or i´m not being fast enough?
Already tried a million times the Volume - and Volume +.
Guetting this message:
"Bootloader V0.03.11-ICS Starting fastboot usb download protocol"
Should get the unlocked mode right?
NeO_CooL said:
I have the latest ICS version availble thru OTA.
Or i´m not being fast enough?
Already tried a million times the Volume - and Volume +.
Guetting this message:
"Bootloader V0.03.11-ICS Starting fastboot usb download protocol"
Should get the unlocked mode right?
Click to expand...
Click to collapse
Ok if you don't get the new screen with two icons, then it isn't unlocking yet. It seems the script is hanging before passing the next step.
When it gets to that screen again, type
fastboot oem unlock
as soon as you hit enter, get ready for that volume down then up, so maybe have it in your lap with your fingers on the volume rocker.
I'll look at the script again to see why it's hanging, or if it isn't hanging, why it's shooting past that point without waiting.
Forgot to say i´m using the windows version.
Thanks
pio_masaki said:
Ok if you don't get the new screen with two icons, then it isn't unlocking yet. It seems the script is hanging before passing the next step.
When it gets to that screen again, type
fastboot oem unlock
as soon as you hit enter, get ready for that volume down then up, so maybe have it in your lap with your fingers on the volume rocker.
I'll look at the script again to see why it's hanging, or if it isn't hanging, why it's shooting past that point without waiting.
Click to expand...
Click to collapse
The issue is that you included the A100 bootloader in the archive with a script to write it.
A100 bootloader (version 0.03.11-ICS) is not unlockable.
You need to write A200 bootloader (version 0.03.06-ICS) to your device, to have the unlocking option.
You know you have unlockable bootloader when you see green ACER logo in the bottom-right side of the screen instead white one in the center.
The script and blob you included is used to restore the original A100 (not unlockable) bootloader.
For the ones looking for the unlockable bootloader, it's here: http://forum.xda-developers.com/showthread.php?t=1557445
smokku said:
The issue is that you included the A100 bootloader in the archive with a script to write it.
A100 bootloader (version 0.03.11-ICS) is not unlockable.
You need to write A200 bootloader (version 0.03.06-ICS) to your device, to have the unlocking option.
You know you have unlockable bootloader when you see green ACER logo in the bottom-right side of the screen instead white one in the center.
The script and blob you included is used to restore the original A100 not unlockable bootloader.
For the ones looking for the unlockable bootloader, it's here: http://forum.xda-developers.com/showthread.php?t=1557445
Click to expand...
Click to collapse
It's just labeled a100, it isn't the actual a100 blob. But go ahead and use that link until I get the chance to go back through it, I'm obviously messing it all up somewhere, I may have used the a100 blob and gotten it mixed up with the a200 blob when I was renaming and shifting things around. I'll pull the download for now until I get the chance to get it all sorted out, sorry guys.
Edit OK its back up with the proper boot loader for unlocking. I can't believe I did that. Huge thanks to smokku for pointing that out!
No worries.
And yeah, you have to be quick when it asks to toggle unlock, like half a second quick.
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
I am really surprised no one has replied yet, but again I am facing the same problem and I've been searching the Internet for one month now and I found absolutely nothing for this phone (specifically for version A010U).
So I am going to post a different question in the hopes that someone will read it and help us out:
I have two Blu Advance 4.0 L A010U phones, which are identical except for the color (white and green). They were manufactured a month apart one in 10/2015 and one in 9/2015.
Unfortunately after only a couple of months of light use and for no apparent reason (did not drop it, or wet it, etc) it started going through a boot loop. It will start, show the "bold like us" logo then restart again without making it to the operating system at all. Like I said I've been looking for over a month to find a ROM (stock or modded) to reflash but with no luck. Then I had an idea. Since I have the other identical phone that's working fine, is there a trick I can do using the working phone to create a ROM that I can use in my broken one. By the way, the non working phone will allow me to get into the recovery menu, but unfortunately nothing happens if I wipe the cache or even if I reset to factory defaults.
Anyone knows what's causing that "boot loop", how to fix it and where to find a ROM or even "extract" or "create" one using a working Advance 4.0 L ???
Thank you very much!
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Deuler93 said:
Hey guys,
I really need to find at least the stock ROM for the new-ish Blu Advance 4.0L (model A010U), because the most recent OTA update unforgivingly bricked mine. Now I want to try to re-flash the stock ROM, but I am also open to custom ROMs, if there are any available. Please help me out! Thanks in advance
Click to expand...
Click to collapse
I just got ahold of a couple of these devices myself and am in the process of going through all the in's and out's of them....I'm a Samsung nerd so I haven't messed with something like these in a while but I got one (that was supposedly dead bricked per the lady friend of mine I got them from) at least able to boot into factory mode and recovery via ADB and just as I'm posting this I'm in adb shell going through the device's internal memory.....so we'll see what all I find and can pull out of this one and possibly know enough to post an intelligible reply with solutions next time
The boot looping sounds like a common problem with these and when I get to that point I'm going to get rid of the stock bootanimation.zip ASAP and try something else. I get the idea that these things aren't exactly power houses built for much so the littlest thing or small bug in their coding could lead to this kind of crap happening.
Hopefully you figure yours out before I toss these out the window! lol
Cheers y salud!
---------- Post added at 02:27 AM ---------- Previous post was at 02:20 AM ----------
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
Forgot to add a couple things about your post, sorry! I beleive (and I just started digging into this phone) that the no command part is the locked bootloader these phones appear to have. I think it was a combo of holding both volume buttons down from a powered off state then pressing power button on that came up with the option for factory mode or recovery (which led to the sad 'no command' droid), i went into factory mode and theres an option for Tp Upgrade which Im assuming is F/W or something similar but I just hooked up to the PC and in that mode it's reading the internal and external memory of the phone and that's about where I'm at so far.
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
I can't wait to try it, thank you! And btw, were you able to get root successfully and if so, how?
Deuler93 said:
Wow! I'm surprised this thread is still going.
Anywho, I found a repository that is storing the default ROM for the 4.0L. The files were just added recently. I would have liked to have seen a custom Lollipop ROM made by now, but this device is far too irrelevant to get any attention, unfortunately. Just root and forget, I guess.
Click to expand...
Click to collapse
Hey Deuler93 -
You have my respect for digging out that BLU ROMs link and sharing with the rest of us. I downloaded the one for my Advance and used SP flash tool to flash the phone that was stuck on a boot-loop. Of course first I had to download and install the MediaTeK drivers for USB connectivity with my PC. Everything worked flawlessly, no glitches what so ever. All these links are easily found and widely available online if anyone is interested I can share here too. I just hope that this boot-loop was due to some software glitch and not hardware failure. Everything seems to work fine for now, keepint my fingers crossed it will NOT happen again.
Well, one less headache to worry about. By the way we're not that far, if you're ever in the Chicago area, I owe you a beer or something. Thank you!
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
I got temporary root using the kingroot apk. But it messed things up and I don't trust it anymore. None of the other mentioned methods worked for me either, maybe try the PC kingroot method
well this helps one thing
good.m. said:
Man I wish I knew. I'm kinda a novice. I have the same phone with a similar problem... I downloaded the recent ota update and the first time it said it couldn't unzip it. I tried again and it seemed to work but when it rebooted into recovery it said there was an error... So it won't boot up, it just goes to the screen that says "no command". I'm pretty sure the there's a way to make a copy of the working ROM but since I don't use a PC for anything I've never taken the time to learn the method.
Click to expand...
Click to collapse
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
What might happen if a ROM is used for another blu phone. ??
A similar phone as well.
Plz advise.
Damn! This thread just keeps going!
I haven't even looked here in a while, so I will bunch my commentary here. I'm also salaried now, so I bought into a OnePlus X (onyx), a more expensive cheapo device, so I do not use the 4.0L anymore.
As for rooting tools, I used the Kingroot APK successfully in the stock environment. I never tried flashing something SuperSU myself, but it could work. Is flashing a SU app possible from the fastboot interface?
And to Steve's question - it is technically possible to flash a ROM for a different device onto your own device, but is considered a bad idea due to the possibility of introducing incompatibilities and missing proprietary requirements. I feel like this would hold especially true to stock ROMs because the manufacturer probably has no interest in supporting anything more than the device that they are manufacturing for. Doing so removes many possible "compatibility" issues from even having to be considered, but I digress. In short, try to find a ROM made for your device and your device only.
Did you find the zip file for the recovery
Marya Wynter said:
umm. . . when the no command option comes up just press the power button and the rest of options will appear. doesnt exactly solve your problem however unless you have the ZIP file to install, which is what I'm looking for.
Click to expand...
Click to collapse
i root my blu advance 4.0l a010u with the kingoroot PC apk, but i got some issues with the lock screen and some apps, so, i need some advice..
i was looking for a zip to use it via recovery but i can't find any..
Recover IMEI
srspinho said:
Hi guys !
Thank you very much for the Advance 4.0L Roms.
I have successfuly recovered my phone, but the IMEI got lost.
So, I need to root it in order to recover the IMEI, but I just can´t get success on any method :
Kingroot
Framaroot
Towelroot
is there another way to root it ?
Thank you very much.
Click to expand...
Click to collapse
You dont need root to recover imei all you have to do is type *#*#84666364#*#* in your dialer and you will be entered in EngineerMode then go into connectivity ,CDS information and radio information phone 1 or 2 then you will see AT+ type something eg.A then backspace and select the first thing you see. Put a space after AT+ and then put you imei code here "IMEI" between these "" You can find your imei by removing your battery it willl be there. After sending command reboot and imei is back.
links are down....check this instead
Hey guys, links here seems to be down .
Maybe this link would be useful for you all... stock firmware can be downloaded and useful help on videos is available too... Enjoy