HTC Diamond Dead After Flashing ROM - Touch Diamond, MDA Compact IV ROM Development

I had an HTC Diamond that kept freezing so I decided to flash the new rom with same version but it stopped at 12% and went black screen(nothing)..after that I cannot power on the phone any more. I tried to get to boot mode but nothing happened...can anyone help and suggest what I need to do to fix this phone please?

If you cannot enter the bootloader mode, then the only solution is the service center... I'm afraid...

did you try remove battery and put it back on??

Ok first quetstion is, were you trying to install the offical ROM downloaded from HTC? If so, send your unit back to the service center & they should fix it for you.
On the other hand if you were trying to install a custom ROM (ie not offical) this might end up costing your money or they may refuse to fix the phone.
One question for you, if you were upgrading using a custom ROM (ie not offical), you would have been advised in the relevant topic to install a HARD SPL before attempting to flash, did you? If so what version, someone might be able to help you.

Happened the same to me a couple of months ago, it´s dead, and it means really dead, send it to service center to change mainboard.

thanks for your help...yes i did remove battery for few hours..then few days..the rom i was using was the original rom, RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced
and the warranty expired so I can't return for service..

there is a possibility of your battery being dead - any idea? do you have a wall charger? do you have an extra battery? do you have a friend with a diamond?
try another battery, or charge this one... and then try to normal start... if doesn't work go to boot loader (hope you know how to) and if still it's completely dead... service center may be the only way out

Happened to me, I was upgrading to offical Indian rom from HTC. The phone went dead rebooting again and again just after the HTC logo appears. I took it to HTC service center, but of no help. I guess they are ediots. Then I took it to a local repair shop & they made it work in 15minutes only. So dont worry get it flashed from any local repair shop.

citifone said:
thanks for your help...yes i did remove battery for few hours..then few days..the rom i was using was the original rom, RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced
and the warranty expired so I can't return for service..
Click to expand...
Click to collapse
if i'm not mistaking that is a rom for elfin devices (HTC Touch).
Maybe someone can advise you if there is anything you can do ...

citifone said:
I had an HTC Diamond that kept freezing so I decided to flash the new rom with same version but it stopped at 12% and went black screen(nothing)..after that I cannot power on the phone any more. I tried to get to boot mode but nothing happened...can anyone help and suggest what I need to do to fix this phone please?
Click to expand...
Click to collapse
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced
Confirmed, the version of the ROM you used is not for Diamond - it is for the HTC Touch. You will have bricked your device completely by doing this... New motherboard I'm afraid.

Raphel Dead
Hi,
I have just flashed my raphel to a new ROM. All went fine and the customisation screen of the new Rom was completed and touch flo screen installed. Then I removed the battery to insert SIM and the phone just wouldn't switch on.
I tried Hard Reset from off and the secreen with the colours came up and the warning that all data will be deleted. I pressed on the up volume and it started hard reset. When phone tried to rebute it remained dead.
Can anyone help please
Joseph

i really hope u didnt flash a Diamond ROM on your Raphael...if u did, check if u can load the stock rom again...

Yup flash the stock rom...
Sent from my HTC HD2 using XDA App

Related

BEFORE FLASHING i780 read here to avoid a BRICK

Please post here if your i780 was bricked.
1)Symptoms before brick
2)Name of firmware (PDA/Phone)
3)Kind of repair after.
Thank you for helping community to figure out how to avoid this future
28/01/2010 SOLUTION:
If you have suddenly (or) after flashing of new ROM strange things:
read this post.
i have one bricked i780
hi heniken78,my bricked i780 as follow
1.when flash your 28008 rom dated 13.12.09,it cann't get into desktop suceesefully,and system goes very slow
2.firmware is PDXIB1
3.noway,because i cann't get in bootloader.even plug in charge cable,the led couldn't light on.
sunnyjiang said:
hi heniken78,my bricked i780 as follow
1.when flash your 28008 rom dated 13.12.09,it cann't get into desktop suceesefully,and system goes very slow
2.firmware is PDXIB1
3.noway,because i cann't get in bootloader.even plug in charge cable,the led couldn't light on.
Click to expand...
Click to collapse
have you tried hardreset(red+green+power) or emergency(b/w+enter)mode?
might you can solve this way =)
hashtowent said:
have you tried hardreset(red+green+power) or emergency(b/w+enter)mode?
might you can solve this way =)
Click to expand...
Click to collapse
No when led is not on anymore- you cant get in bootloader.
heineken78 said:
Please post here if your i780 was bricked.
1)Symptoms before brick
2)Name of firmware (PDA/Phone)
3)Kind of repair after.
Thank you for helping community to figure out this BLACK future.
Click to expand...
Click to collapse
My phone was bricked two times
1) The phone rest stuck to Samsung screen when I open it
2) PDXIB1
3) Samsung Center changed the motherboard of the phone
Symptoms:
Every application will respond with message: Application is not signed or missing components (or something else). Only soft reset worked - but phone did a hard reset every time. Sometimes after hard reset contacts stayed as it was (everything else was deleted). These troubles last for 3 days for me until my phone died. Board is damaged and repair will cost 310,- €.
ROM version:
28205 @96 DPI made by ironeagle
Repair:
To buy a new board and a new battery (cause the old one has been damaged too - or just use a second battery instead).
how to execute emergency mode
hashtowent said:
have you tried hardreset(red+green+power) or emergency(b/w+enter)mode?
might you can solve this way =)
Click to expand...
Click to collapse
i donn't know how to getin emergency mode,can you explain what i should to do
emergency mode is the mode u use when u flash a new rom
fn+enter+power(5 seconds).
Anyway, when my device bricked...it was almost 6 months back.
I used quite a bit of wifi, and left my device on the charger with wifi on accidentally. When i woke up a couple hrs later...the device seemed like it was in standby charging. Pulled off the charger, but the charging LED was still glowing! Device didnt respond to anything, pulled the battery out and put it back in....and boom! went totally dead...tried different batteries, tried soft reset, format mode, emergency mode...nothing. no sign of life!
mobo had to be replaced....got it done free as it was just abt 15 days old when this happened
I think its more of a hardware fault....some units being faulty waiting to blow in your face!
Just spoke to Samsung service about bricked phones: From their experience they have changed mobo only once, when 780 wasnt charging, but was working.
But they told that in case of fault of bootloader - thay DONT restore it, just replacing motherboard!
So there is chance to repair you phone by JTAG tool.
I hope trizzio that helps.
heineken78 said:
Just spoke to Samsung service about bricked phones: From their experience they have changed mobo only once, when 780 wasnt charging, but was working.
But they told that in case of fault of bootloader - thay DONT restore it, just replacing motherboard!
So there is chance to repair you phone by JTAG tool.
I hope trizzio that helps.
Click to expand...
Click to collapse
hey dude - where could I get that JTAG tool?
trizzo said:
hey dude - where could I get that JTAG tool?
Click to expand...
Click to collapse
Dude I advise you to visit http://www.omnia-repair.com/ and ask on forum if someone can do this for you. Tool is about 300 EUR and Omnia is top brick phone, so you should find services that already have it, it does support i780.
tip: use google search for more options.
Hey guys,
my phone was bricked: I'd flashed heineken's "i780 WM 6.5.3 ver.28205 DPI 96" rom. After two days some errors appeared and I flashed (&hardreset) the rom again. While connecting to ActiveSync the connection was broken after some minutes. Then I have disconnected the USB-Cable and the phone was frozen. No reaction. No hard-reset keys, no LED reaction while power-connector.
So... I'm not shure whether this problem is because of heineken's rom. But the good news are: Samsung support switched the motherboard because of 24month guarantee
SAM-123 said:
Hey guys,
my phone was bricked: I'd flashed heineken's "i780 WM 6.5.3 ver.28205 DPI 96" rom. After two days some errors appeared and I flashed (&hardreset) the rom again. While connecting to ActiveSync the connection was broken after some minutes. Then I have disconnected the USB-Cable and the phone was frozen. No reaction. No hard-reset keys, no LED reaction while power-connector.
So... I'm not shure whether this problem is because of heineken's rom. But the good news are: Samsung support switched the motherboard because of 24month guarantee
Click to expand...
Click to collapse
Im sorry SAM.
This first version was really weird, I have changed algorythms of compile again in version 2.
But there is always way when you get starnge glitches before you get brick - to flash offical rom to avoid a brick.
As for me I never had any of symptoms..flashed 1001 time.
About bricks...
I have experienced described situations (sudden out of memory, unable to run any app becouse of errors, dissapearing data and so on) around ten times during my cooking/flashing adventures, with different ROMs from different developers. Sometimes at the begining, when weird behaviors of my i780 started, I tried flashing device with other unoficial images, but problems remained. I think I even posted about my problem somewhere...
And I could always recover my device doing one simple thing.
Flashing official PDXIB1.
But important thing is that YOU SHOULD USE OFFICIAL UPDATER from Samsung site (in my case Vista version), not a .bin under Mirage!!
I know it is stupid, but it works better (and if something looks stupid and works better, then it is not stupid any more; Murphy`s law)
In my case Mirage not always proved to be a sollution.
SO every time when that situation emerge, thats what I would do very quick:
1. Hard reset.
2. Flashing oficial Samsung Updater (tutorial on Samsung site)
About reasons bricks happens; I have found no pattern. It happens with WM6, WM6.1 and WM6.5 or WM6.5.x. Sometimes one and the same ROM works perfect two weeks and flashed next time generates bricks.
As someone noticed previously, it is probobly a hardware-software problem, some kind of memory /filesystem/ FAT? damage and it is possible to revert that by flashing official ROM..
I am not a computer scientist, but thats only pattern/mark I can see..

Help or explain plssssss.

Hello Everyone,
I have HTC SPRINT TOUCH PRO 2 PHONE.
I was updating the RADIO version on my phone and after it installed the device went to REBOOT and it never opened again and it doesn't goto the boot loader. The only reaction that the phone does is when i put it to charge the red light turn on.
I have tried hard/soft Reset, and nothing have worked.
PLEASE, DOES ANYONE CAN EXPLAIN WHAT HAPPENED ?? OR What can I do ??
Thank you for your answer in advance.
could be a battery issue, seems like its not holding a charge. Go to a store and try a new battery?
Sorry, but it sounds like you bricked your device. I'm guessing you flashed a radio not made for your device, like a GSM radio. If you can't access the bootloader, then I'd say you probably need to get your device replaced under warranty (by going to the store you bought it from and playing dumb about why it won't work so they'll replace it) or send it to HTC and pay to get it replaced.
try to reflash back to the stock rom...download and use the sprint exe on this page to do so...http://forum.ppcgeeks.com/showthread.php?t=91940
ive had this happen and this was the only way to get it working again
Thank you everyone for trying to help, I will try to reflash the stock ROM and hopefully it works otherwise I will send it to HTC since i dont have warranty.

Read Internal Storage from Bootloader

Hi,
My diamond was water damaged a while ago, I let it dry out for a couple of weeks and it did not work, I bought a new diamond and tried the battery in my old one and to my amazment it started up, well to the touch diamond screen anyway, it didn't display any red writing and the sreen stayed on but went black after that. I though the radio must have been gone so put it in the bootloader and tried to flash the same radio I had before 1.17, the white screen came up and all went fine but still the same problem!
I really need the data on my internal storage and so need to at least be able to read that. I don't care about it working forever thats why I bought another one as a doner!
Could someone please tell me what happened and how to fix it! Why does it not get past this? Also I have hard reset it, reflashed the original ROM successfully, reflashed hardspl and reflashed the Stock SPL but it still does the same!
In case it helps the bootloader says:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Wrong Platform(v0x0)
Does anyone know how to, or if there is any way to read the internal storage from the bootloader? I know the phone can read it to flash a ROM from it so why not to get my files off? I can get it into the bootloader so does anyone know any software that can help me to read the files and get them off?
Thanks.
HardSPL HTC repair
Also I called HTC and they said they could try and repair it but I'm not sure about sending it to them as I do want my data but it has HardSPL installed although they did say due to it being water damaged it is an out of warrenty repair and would cost me. Does it matter then if HardSPL is installed as I'm paying for it? I didn't ask them as I wasn't sure. Is there any way to install the stock SPL from the bootloader? As I did try but it didn't seem to work! I am not willing to destroy it further as some people do as I need the data.
microang said:
Also I called HTC and they said they could try and repair it but I'm not sure about sending it to them as I do want my data but it has HardSPL installed although they did say due to it being water damaged it is an out of warrenty repair and would cost me. Does it matter then if HardSPL is installed as I'm paying for it? I didn't ask them as I wasn't sure. Is there any way to install the stock SPL from the bootloader? As I did try but it didn't seem to work! I am not willing to destroy it further as some people do as I need the data.
Click to expand...
Click to collapse
Put into bootloader (Just vol down) and flash stock from the RUU
Badwolve1 said:
Put into bootloader (Just vol down) and flash stock from the RUU
Click to expand...
Click to collapse
I already tried but it didn't work.
microang said:
I already tried but it didn't work.
Click to expand...
Click to collapse
lob it in the microwave for 10 seconds, remove when slightly smoking, take it to htc and say "hello, my phone went boom, can i have a new one please?"
The MW blows everything
Badwolve1 said:
lob it in the microwave for 10 seconds, remove when slightly smoking, take it to htc and say "hello, my phone went boom, can i have a new one please?"
The MW blows everything
Click to expand...
Click to collapse
lol, I would if I didn't care for the data, I think I'm just gunna send it to them and see if they can get it off!
microang said:
lol, I would if I didn't care for the data, I think I'm just gunna send it to them and see if they can get it off!
Click to expand...
Click to collapse
if you wahck it in the microwave and swap the stickers around (Serial one under the battery) you ca nclaim on warranty, and end up with 2 new Diamonds
pls, a rescue ? I have the same problem, my HTC worked perfectly, till i broke the display, I've fixed it, it worked, but after a day ot two,...it crashed. And I get the same message when I enter the bootloader.
Infinite restart / reboot loop
What a pity! Any progress in this topic?
I have also this same problem. My Diamond crashed a while ago. It happened suddenly after I activated the WiFi module during normal daily use. The unit restarted itself and stucked in an infinite restart loop since then. I reflashed everything possible with success (also stock ROM), radio ROM etc. No way - the unit is rebooting and rebooting in the very same restart loop.
So I can not access the internal storage and can not save my data. Though there are no pictures of my new-born son, but there are some important files and notes I would love to save, but how?
Is there any possibility to access the internal torage from the bootloader?
Is it maybe possible to open the unit - voiding the warranty - and resolder the internal flash storage on another diamond (a working one)?
I suppose there is some problem with the radio, which causes the reboot. The remaining parts are probably OK. Maybe there is some way to deactivate the radio (WiFi module) from the bootloader (MTTY tool)?
Any hints highly apprechiated!!
Thanks guys!
tekata said:
What a pity! Any progress in this topic?
I have also this same problem. My Diamond crashed a while ago. It happened suddenly after I activated the WiFi module during normal daily use. The unit restarted itself and stucked in an infinite restart loop since then. I reflashed everything possible with success (also stock ROM), radio ROM etc. No way - the unit is rebooting and rebooting in the very same restart loop.
So I can not access the internal storage and can not save my data. Though there are no pictures of my new-born son, but there are some important files and notes I would love to save, but how?
Is there any possibility to access the internal torage from the bootloader?
Is it maybe possible to open the unit - voiding the warranty - and resolder the internal flash storage on another diamond (a working one)?
I suppose there is some problem with the radio, which causes the reboot. The remaining parts are probably OK. Maybe there is some way to deactivate the radio (WiFi module) from the bootloader (MTTY tool)?
Any hints highly apprechiated!!
Thanks guys!
Click to expand...
Click to collapse
Hi,
Perhaps you could flash another rom to it. but remember you need to clear the ram with mtty before flashing the new rom. get the diamond unlock tool from olipro (its there in the stickies, i guess) and/or flash new radio series then install the new rom of your choice.
Have a shot, and tell us how it goes.
thanks.

Bricked??

well i guess i keeep screwing my self over from one problem to another
but after i found a way to install a root without phone being able to load completely i think i bricked my phone here is why
my phone doesnt want to charge n when i try to power on it doesnt vibrate ... but i do see a dim red light when usb is on when its off it goes away n my laptop makes the noise when i connect it
Can you give us a more thorough explanation please. Don't understand properly.
Sent from a Time Lord, using his TARDIS.
Not much info given so i'll start with the most basic question.....
Have you got HTC Sync installed on your pc? And a battery of about 70%?
If you do try installing the latest RUU posted in a few topics under this page....
likewise im bricked
i tried to update my hboot but it frooze n my phone cut off and has no led light when i try to connect thru usb but i hear the beep on my laptop when i try to power nothing or try to boot into hboot nada is that good enough?
can i restore in android recovery? what update file in need to?
bumppppp please help
restore nandroid backup
firth999 said:
restore nandroid backup
Click to expand...
Click to collapse
He can't the device won't power on
Sent from my HTC_A510c using Tapatalk
I tried to unlock the bootloader on my device a little over a week ago - bricked it completely.
Had updated HBOOT and everything went fine - 'success' message appeared, etc.... Then my handset died and it wouldn't switch back on; it just flashed on and off repeatedly when powered on and I couldn't stop it, unless I pulled the battery. Couldn't access bootloader, couldn't do anything.
Took it to the local Three shop and they wouldn't touch it. So, I chanced my luck with HTC and was upfront about what had happened, i.e. I'd started the bootloader unlock process using their own HTC Dev software.
I've just got the 'phone back and they had to replace the motherboard. Haven't charged me for picking it up, via UPS, the repair OR sending it back to me, also via UPS.
I had hoped they'd ship back with the bootloader unlocked but they haven't! Doh.
Ah well, can't complain. HTC have definitely earned my gratitude, though, and I'll no doubt stick with them in future. I've just got to remove all the crappy pre-loaded software again.
so i basically have a bricked phone damn i needed it only phone i have n probably will have for awhile i had so much important #'s , notes , ext... im clueless to either tell HTC the truth or just buy another android phone idk :/
any ideas?? is it bricked or not i just need help why isn anyone paying this post any attention .. where is all the pros?
I'll swap your bricked wildfire s with a working desire z?
einstein.frat said:
I'll swap your bricked wildfire s with a working desire z?
Click to expand...
Click to collapse
if you would be willing to do so i would greatly apreciate that ... question is what would u do with a bricked wildfire s lol ?? but inbox me so we can work this out.. and what service?
bump!! still need an answer :/
Hello Im new here and Im noob in this stuff.I want to root my Htc wildfire S but im scared that Im going to brick it .So I have a few questions.
If mobile is bricked is it possible to restore old options.(is it possible to save it)
After few ROMS is it possible to restore everything like in begging if I dont like it.
Do you lose your guarantee after rooting.
Please someone help
Recovery
Take out your battery, put it back in Hold volume button down and press power button, does this do anything?
pxed322 said:
so i basically have a bricked phone damn i needed it only phone i have n probably will have for awhile i had so much important #'s , notes , ext... im clueless to either tell HTC the truth or just buy another android phone idk :/
Click to expand...
Click to collapse
You haven't even given details. Did you root? Custom ROM?
Try flashing an RUU.
My experience
This weekend I bricked my phone almost also.
Just installed a new version of my ROM to test and then it hanged or so.
When trying power on (normally and with volume down), nothing happened and I got the 3 vibrates.
I removed my SD card and then the phone would boot again
I really hope I don't get that anymore
BTW: my SD card is really old, around 2 years or more (so that may be the cause)
Format your SD card, then see if that works
Sent from my HTC Wildfire S A510e using XDA

Sudden death of n2 n7100

I have been using my n2 for 1 year. but, I found my note 2 not turning on two days back. I just kept it fully charged and the next morning its not turning on. It was first stuck on the boot logo. then, I pulled the battery out and try to factory reset from stock recovery. but, I couldn't enter. then I tried installing the stock rom via odin. but, no luck. my android version was 4.1. can anyone tell me where is the problem and how I can solve?
oh one thing, now its not even turning on. just going to download mode. if I connect it to charger a battery icon shows up with a refresh circle on middle.
Sorry for hear that, mine have died on Sunday night u_u after flashing Agni kernel but I don't think the fault was for the kernel, the days before flashing it was already showing an erratic behavior like freezing and rebooting by it self. I thought it was because an undervolt or something like that (some custom roms do it) so i tried changing the kernel =( to see how it will die.
I took my phone to an external service center on yesterday morning (It doesn't have warranty anymore), and there they used Riffbox and Jtag to trying come back to life :laugh: and it worked for a couple of hours. They told me it had the bootloader bricked. I have my doubts because I have not even touched the bootloader just once when I rooted it after bought It (if it was touched after it, should be on an update or custom rom flashing, I don't know).
But last night was died again, so I started to search on web and I found this SDS, all the stuff described are the same that my phone suffered (but It was on 4.3 Ditto Note 3 soooo I though it was already solved since 4.1.2).
Is very sad but now I'm going back to the Service Center to tell them what I found. Maybe they will need to change the emmc or the motherboard =S I hope it doesn't cost a lot.u_u
Whatever, maybe yours one can have the bootloader broken, because yours turn on into download, mine doesn't turn on to recovery/samsung logo/download. Perhaps you can have luck and a chip solution just trying to flash another bootloader with odin and if you can get back working your Android, don't forget to download the "emmc check" app from playstore. It will give you any clue about this, if it says your emmc is vulnerable you will need to do the same as me changing emmc or motherboard but if you have luck and says it is not a bad batch you will no have problems again just flashing a good bootloader.
Service Center in Slovenija
badtzo said:
Sorry for hear that, mine have died on Sunday night u_u after flashing Agni kernel but I don't think the fault was for the kernel, the days before flashing it was already showing an erratic behavior like freezing and rebooting by it self. I thought it was because an undervolt or something like that (some custom roms do it) so i tried changing the kernel =( to see how it will die.
I took my phone to an external service center on yesterday morning (It doesn't have warranty anymore), and there they used Riffbox and Jtag to trying come back to life :laugh: and it worked for a couple of hours. They told me it had the bootloader bricked. I have my doubts because I have not even touched the bootloader just once when I rooted it after bought It (if it was touched after it, should be on an update or custom rom flashing, I don't know).
But last night was died again, so I started to search on web and I found this SDS, all the stuff described are the same that my phone suffered (but It was on 4.3 Ditto Note 3 soooo I though it was already solved since 4.1.2).
Is very sad but now I'm going back to the Service Center to tell them what I found. Maybe they will need to change the emmc or the motherboard =S I hope it doesn't cost a lot.u_u
Whatever, maybe yours one can have the bootloader broken, because yours turn on into download, mine doesn't turn on to recovery/samsung logo/download. Perhaps you can have luck and a chip solution just trying to flash another bootloader with odin and if you can get back working your Android, don't forget to download the "emmc check" app from playstore. It will give you any clue about this, if it says your emmc is vulnerable you will need to do the same as me changing emmc or motherboard but if you have luck and says it is not a bad batch you will no have problems again just flashing a good bootloader.
Click to expand...
Click to collapse
Service Center in my country told me, that i have modified the software and that there is no warranty to it even if it was SDS, for which they know...
New motherboard and that's it...:crying:
U should have done factory reset by stock recovery and bring binary count to 0 by that. I had same problm. Went to service centre there they told to replace motherboard which was almost costing very high. Luckily I had made everything on phone normal before going to service centre so I had done all in warranty《free》
Sent from my GT-N7100 using XDA Premium 4 mobile app
starlut said:
I have been using my n2 for 1 year. but, I found my note 2 not turning on two days back. I just kept it fully charged and the next morning its not turning on. It was first stuck on the boot logo. then, I pulled the battery out and try to factory reset from stock recovery. but, I couldn't enter. then I tried installing the stock rom via odin. but, no luck. my android version was 4.1. can anyone tell me where is the problem and how I can solve?
oh one thing, now its not even turning on. just going to download mode. if I connect it to charger a battery icon shows up with a refresh circle on middle.
Click to expand...
Click to collapse
if you can go into download mode try flashing a stock rom via ODIN and report back. If it says NO PIT PARTITION in ODIN then you need to flash the pit file and then a stock rom .
zeeshanonlyme said:
if you can go into download mode try flashing a stock rom via ODIN and report back. If it says NO PIT PARTITION in ODIN then you need to flash the pit file and then a stock rom .
Click to expand...
Click to collapse
i tried to flash the stock rom. its not flashing the kernel. and, I don't know whats wrong with it.
I don't have warranty and I am stuck in it.
aNtRx said:
Service Center in my country told me, that i have modified the software and that there is no warranty to it even if it was SDS, for which they know...
New motherboard and that's it...:crying:
Click to expand...
Click to collapse
Sorry to hear that, but they told you nonsense. If it's really SDS they have to repair for free. Ask a friend in your country who is envolved in legal things, a lawyer best.
One in general: As long as one can start eg. download mode, it is no SDS, mostly a software prob.

Categories

Resources