Hi,
I have encounter a problem plz help me problem is,
Form last few days I am testing multiple rom on my device (Xda orbit),with in testing I don’t know when this thing happen which is multiple “DbgToStorageLog0.txt, DbgToStorageLog1.txt …” files created on device root some time one of these file is more then 5mb and my device gone too much slow and some time gone in hang state or auto restart . I try to solve this problem by doing orignal rom of “O2 xda” but no success .i also tried method of manually created file of 0k size but bettery backup problem remain same means some processing countinously occures for creating that file and waste battery.With in one hour no use of phone (in stand by mode) 10% bettery loss.
plz tell me what to do?
Sorry for bad english
Thanks in Advance
Related
hi,
i'm a newbie, and yes i have screwed up.. performed (or should i say.. almost performed) my rom update on my desktop (which is kinda slow PC...) i had no applications or unwanted services running, my computer. The Progress on the Rom update (the desktop couterpart) had incremented and had become full (the progress bar i mean..) and it was nicely sitting there for about two hours with no indication of any further progress (yeah just wanted to make sure it wasnt me being hyperactive or in a hurry )
On the PDA it was a different story.. the screen indicated a 100% copy of some image file and then it was stuck at "Reset Hermon" stage. )for the record, i feel like a parrot now, these words dont really make sense to me.. )
So i removed the cable, battery and booted up my phone after about ten minutes... yup, just like i had expected it got stuck at the bootloader screen.
Now obvisously, my Rom update wizard wont work, as the very first step is to check for a existing Active Sync Connection. and Activesync is not a application tht recognizes phones connected in their bootloader mode...
Now i have no idea about trying to flash thru the memory card, i tried copy pasting all the files that the Rom update file had generated in the desktop folder it was run in(about 4 exe files that are supposedly 'not a valid 32-bit application' and two .abi files.. one of the abi file is 85 mb, so i guess that was the image file.. but when i copied these files into the memory card and re booted my PDA, it didnt show any change, as in it still asked me to connect the USB cable and was trying to get the image from there..
I have a o2 xda zinc. yeah, with no Operating system ..
to say that help would be appreciated is a understatement
damn, contacted the o2 support guys, but i have this feeling that this (forum ) would be a faster way to know if i have to drop my phone at the 'collection center' or not. i am still optimistic as the phones under warranty and its just a software glitch. Please enlighten me. what are my options?
hi
my o2 zinc has the same problem just like yours
if your zinc fixed or any thing new pleas tell me
tnx
go to this post
http://forum.xda-developers.com/showthread.php?p=1512766#post1512766
hi mazi_v, i have problem when upgrading my XDA II.now it just displaying
USB and V 1.02
what i have todo?
thank's
"what i have todo?"
connect it to usb and rerun the flash
Hy guys,
I encounter the following problem with my device:
it generates a file called "DbgToStorageLog" on my root, taking space from my memory (several logs, 2,3 of sizes up to 3MB)... it also generates other files "HTCExceptionLog". The first ones i can't delete (except for one. eg: i have 3 files, i can delet only 2 , one has to remain... message: file is in use), the second type of files can all be deleted... but show up again.
Please help me solve this problem
Many thanks in advance
The way to resolve this is to use notepad and save a blank page as DbgToStorageLog1.txt.
Do the same and save DbgToStorageLog2.txt, then 3, 4 and 5. Do the same with HTCExceptionLo, save as a txt file.
All these saved files will have a size of zero bytes. Select properties on each of the newly saved files and make them read only. and replace the ones of the same name on your device. The files will not increase in size.
Note, you may have to soft resetIf if any of the DbgToStorageLog files displays an error to being replaced...
Brian_bs
Thank you very much... after several days of tring, i nov have 6 files: DBG to storage : 0,1,2,3,4,5 all having a value of 0B ).
By the way, i have another problem.... my screen looses alignment and i have to realign it... sometimes it realignses itself.... this happends when I use several programs at once. Is thi software or hardware fault? Would changing the screen solve it...
thanks in advance for your answers
DbgToStorageLog multiple files
Hi,
I have encounter a problem plz help me problem is,
Form last few days I am testing multiple rom on my device (Xda orbit),with in testing I don’t know when this thing happen which is multiple “DbgToStorageLog0.txt, DbgToStorageLog1.txt …” files created on device root some time one of these file is more then 5mb and my device gone too much slow and some time gone in hang state or some auto restart . I try to solve this problem by doing orignal rom of “O2 xda” but no success .i also tried method of manually created file of 0k size but bettery backup problem remain same means some processing countinously occures for creating that file and waste battery
plz tell me what to do?
Sorry for bad english
Thanks in Advance
In Registry explorer (SKTools) search for key: DebugLog (HKLM\Drivers\BuiltIn\DebugLog\), rename Htc_Lib.dll (delete simbol "_"), change index from 2 to 0. Save and exit SKTools. Soft Reset.
After soft reset - delete all DbgToStorageLog.txt.
In some cooked roms this key is missing. Sorry for English poorly.
Thanks you very very much spgi
after long time somebody response, your solution solve my problem and i am very glad but after doing this my orbit goes too much slow and when i tuch screen it response after 3 to 4 sec and beep trice. So when roll back to previous values "Htc_Lib.dll and index=0" then my orbit give response fast as compared before but start loging files "DbgToStorageLog0.txt ..." again
please give any solution
or if you have o2 orbit and working prefect then give me your "HKLM" registery backup may be this can solve my problem if its possible to import registry of other device
Thanks again for your help
Sorry for bad english
Hi, This problem occurs when GSM data is deleted.
See this post http://forum.xda-developers.com/showpost.php?p=3665608&postcount=52 and follow the steps and maybe this problem will not occur again.I had that and now my device works perfectly. Good luck and I hope to help you.
Thanks a lot "spgi" you have solved my big problem thanks again
helding
Hi again spgi,
As you solve my problem earlier please tell any solution for my problem now
I correct my orbit as u told but after a week my device going in held condition too much and then I doing soft-reset but after some soft-rest its not on even I press power+soft-reset+talk button, but after putting battery out from device for a day then press power button its on and held at boot screen now I can hard reset with official Rom through memory card and some time its success or some time screen fill with horizontal white lines and device goes in not responding mode until i put off battery from device its not off, then same problem of waiting 24 or some time with 5 min its starts. If rom successfully burned then with 10 days same thing happen with my device (helding ). I don’t know what happened to this orbit ,even I used o2 xda from one year and flash lot of rom nothing happened with xda, but orbit give me lot of problem.
Do you have any solution?
I appreciate your response
sorry for bad english
Thanks againg for helping me
Team,
I have a Vodafone branded TyTn II. My company has also installed a "customization" file/script that sets certain perameters and configures the company mail. Unfortunately, the customization file affects other operations. As a result, I have upgraded my Rom in the belief that the this would completely remove spuriuos company files but to no avail. After about 3 seconds following a cold re-boot this cusomization file kicks in and a whole set of new files are installed. I have found some of the offending files but they are write protected so I can't mod them.
How can i stop the "Customization" from running or how can I modify the scripts?
TIA
Soft reset before the customization starts. It only runs the first time after a hard reset.
By the way, soft reset does not work on v1520 (Asus P550). I have the same problem with my device and no solution yet. Even in this forum I've asked about stopping the installation of EXT ROM several times but nobody has provided any answers...
Thanks,
The reset worked but the problems I thought were due to the corporate config are still there. I'll post the main problem in another thread and see if anyone has any ideas.
hey guys,
I m facing 1 irritating problem with ma touch diamond. After some time when I install any ROM ma diamond gets hang. when i use to reboot it up, always it automatically gets soft reset (screen showing - preparing device for first use - after restart) so I lose all installed programs.
So i thought, it might be problem of ROM. So I have tried plenty of ROMs n Radios but after each set up system can able to survive only for 2 to 3 days.....n again it either hangs the fon or makes all installed programs inaccessible (it dosen't show fon memory in file explorer)........
So any body hav solution for this??
or is it hardware problem??
kaustubhv1 said:
hey guys,
I m facing 1 irritating problem with ma touch diamond. After some time when I install any ROM ma diamond gets hang. when i use to reboot it up, always it automatically gets soft reset (screen showing - preparing device for first use - after restart) so I lose all installed programs.
So i thought, it might be problem of ROM. So I have tried plenty of ROMs n Radios but after each set up system can able to survive only for 2 to 3 days.....n again it either hangs the fon or makes all installed programs inaccessible (it dosen't show fon memory in file explorer)........
So any body hav solution for this??
or is it hardware problem??
Click to expand...
Click to collapse
Your problem is a common problem with an easy solution http://forum.xda-developers.com/showthread.php?t=540290
I always use mtty before flashing
Source code
http://www.multiupload.com/4ECGKXPYJW
[Steps]
Extract above tar.gz in / and then
Download CodeSourcy Compiler from here
https://sourcery.mentor.com/sgpp/li...rm-none-eabi/arm-2011.03-42-arm-none-eabi.bin
Install above C compiler then issue following command in source directory extracted above
make ARCH=arm tsunagi_defconfig
make -j16 ARCH=arm CROSS_COMPILE=/arm-2011.03/bin/arm-none-eabi- zImage
When this steps complete you will get zImage in arch/arm/boot folder
New Image Android 2.2.1 with Audio , WiFi + AP mode , Bluetooth
http://www.multiupload.com/HFZUWFNX0I
Just extract above file to \Storage Card and go to \Stroage Card\2.2 click on CLRCAD (4-5 times) and then click on Haret
(In this version there is no need to copy nvram.txt to \Storage Card)
New Image Android 2.3.5 with WIFI and Bluetooth
http://www.multiupload.com/QUT30LPS8K
extract to SD card and then go to \Storage card\fathom
Click on clrcad 4-5 times and then click on haret
For wifi it is must to copy \windows\nvram.txt to \Storage Card
if it is difficult to copy from windows folder use attached one
[Note : In this version i have disabled fb console so you will not see any text while booting so wait at least wait 5 min if none appears do soft reboot and then retry]
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
wifi
Not working
Bluetooth
Vibrator
Issue( Solved now)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
for wifi extract following file and put replace zImage with this one and copy bcm4329.ko to /system/lib/modules also copy \windows\nvram.txt to \Storage Card
Link for wifi
http://www.multiupload.com/DOEAA1JXCD
great work
great job dude. this was totally unexpected.
at this stage of development with such performance its looking like bright future for android on fathom. installed it...will check...
thankyou
Hello bro, i'm from india. I own lg fathom and i checked yours installing android on fathom. Plz could u explain it in brief and also mention minimum requirement of storage on storage card and the type of storage card. Plz mention it in detail. I tried to install it in first and it gave error "smd_alloc_v1: cid 47 does not exist". And at the second time the screen started flickering and hanged up there only. So plz tell me in detail. I have been waiting for long about this.
jaggu5789 said:
Hello bro, i'm from india. I own lg fathom and i checked yours installing android on fathom. Plz could u explain it in brief and also mention minimum requirement of storage on storage card and the type of storage card. Plz mention it in detail. I tried to install it in first and it gave error "smd_alloc_v1: cid 47 does not exist". And at the second time the screen started flickering and hanged up there only. So plz tell me in detail. I have been waiting for long about this.
Click to expand...
Click to collapse
hey bro...am also from India(delhi)
first download sdformatter software (search it from google) and then quick format ur sd card using it. now copy the tg01 folder(the folder that contains haret application) to it. now tap clrcad 4-5 times...it may show alert, click yes....or it may not....after that jus click the haret app.....it should work now....and first boot will definitely be taking several minutes but after tht its great.
ajeet17181 said:
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
Not working
Wifi
Bluetooth
Vibrator
Issue(s)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
Click to expand...
Click to collapse
hey vijay.....i wanted to add some donation in ur paypal account but due to same country i was nt able to....kindly send me ur mobile no. i will send credit in form of recharge...
and please somehow try to shift sound to earphone if not main speaker...thats the most annoying thing
Thanx for fast response. Any way I got it worked by formatting in PC selecting FAT32 and followed your steps and it worked.Really THANX man for this. Really I sweated alot to search this. But many things are not working like can't call or disconnect(It takes ages to call , don't know how to disconnect). Also 3G is not working. Can u PLZZZZZZ put a stable android os. Already gingerbread version came for HTC HD2. Can u plz upload a stable Android with all features working. Once again Awesome work Thanx and take care.
yup....many things are not working.....but its jus beginning and with time the picture will change...
u can use it for playing some cool android games like angry birds....
also a surprise i got- thats an mkv movie 1280x720p playing very smoothly...
again thank u for your reply bro. Plz update this thread regularly as possible and also post the new things you find as i'm new for this forum and new to this tweaking. Thanx for the post.
really nice work, i was hoping someone to port android on lg fathom...
thanx a lot ....... but do release a stable version of android .. best of luck
Hello,
i'am from Indonesia, and own LG fathom.
i hope you can always update this thread
Thanks
flickers!!!! a solution
if u r experiencing flickers when on non home screen applicatins, settings, etc
jus open the mplayer app and press the start{central} hard key so that it runs in background....now do whtever u want.... no flicker anymore.....it should not happen again but if it occurs do the same procedure
download complete
when i try do the steps, it says linux booting but then screen flickr
after two times restart now it can booting
hope it can running well
Thanks
rvin42 said:
hey vijay.....i wanted to add some donation in ur paypal account but due to same country i was nt able to....kindly send me ur mobile no. i will send credit in form of recharge...
and please somehow try to shift sound to earphone if not main speaker...thats the most annoying thing
Click to expand...
Click to collapse
The amplifier IC is LM49151 and i am not able to find the driver for the same once we will get driver for that audio problem will be solved..
Hey ajit bhai, plz update the thread as and when u find any modifications.
Hey guys, after when switch on to android it takes around 15 minutes to get the signal and recognised and when u cal, the end button does not work so for that u have to press hold and then press end button and then it works. And it does not support messaging and internet also. I just thought to say the problems bcaz its my first time abt tweaking. So plz anybody finds any solution plz do let me knw. Thank u guys for ur advancement.
rvin42 thank u again for ur reply. Plz anybody found any changes for this. What i mean is that you guys know that some of the features are not working on when u port into android like microphone, no message support, no internet support although it shows operator name and also no speaker, bit flickering but you can follow rvin42's idea. So plz anybody do something. Try anything guys.
downloaded and will test it in a while. i can test anything you want, i have lg expo and its just my spare phone. barely use it for movies. i also want android with DLP support!!
ran it and haret froze, then ran it again and booted but got stuck at creating new data.
Hello el_venga, hey lg expo has same configuration as fathom, so plz if u find anything new or modification abt the android plz let us know man. Hey by the way if u need any help u can ask here.
sometimes stays at Booting Linux and then it just restarts to WinMob and when it finally boots get stuck where the pic is. btw it has to be in flight mode to boot there.
h**p://***.mediafire.***/?3rhu2u1w6b1i4u7
fill in the *s.
not actually stuck but just keeps going and the number at the left gets bigger and bigger.
when it finishes screen just stays black.
el_venga said:
sometimes stays at Booting Linux and then it just restarts to WinMob and when it finally boots get stuck where the pic is. btw it has to be in flight mode to boot there.
h**p://***.mediafire.***/?3rhu2u1w6b1i4u7
fill in the *s.
not actually stuck but just keeps going and the number at the left gets bigger and bigger.
when it finishes screen just stays black.
Click to expand...
Click to collapse
this happened with me too....
wht i did was formatting my micro sd with sdformatter ....
then jus follow the steps...and dont forget to tap clrcad 5 times before u run haret...hope it works