Hi everyone... I am new to the PPC world... being just recently swatch from my Treo600 to a new XDA2s, I am having a little difficulty getting used to the Microsoft way of doing things in PPC2003... I am just wondering is there anyone who can help me or point me to the right direction where I can get some external program that can help me from going insane... here's my problem... I usually keep a huge contact list with all my customer, supplier, co-worker, family and friends contact all in my PDA... so the usual way for me to make a phone call is to search it from the contact list... but here's my problem, I travel alot with my job and depending on my current location, I have to edit the number in my contact before I dial the number... in my old palm, I can simply edit the number before I dial that number (there's a funtion on my palm that allows you to edit before call... so it allows me to edit the number without physically changing the number in my contact list)... I am just wondering can PPC do that? Or is there any program in PPC that will allow me to do that? As far as I can see... in PPC, as soon as I have search for a contact and then I click on his or her number with my stylist... it will automatically dial... I can not edit it before I dial... the only way I can edit it before I dial is to physically edit the contacts... which is very annoying as I sync my contacts with my exchange server, I don't wanna to have to have all my contact get mess up with different area code and dialling code from different country... anyone know how can I solve this problem? Thanks for your help in advance... I very much appriciate all of your advice in advance... Peter
I think the most straightforwards solution here is to store all of your numbers in the international dialling format; that way, wherever you are, your device will place the call correctly
For example - if I had a contact in Glasgow, UK, it would be stored as +44141xxxxxxx (+44 for UK, 141 for Glasgow and the remaining seven digits as the local number)
In my experience whenever I have been abroad, any calls to any of my stored numbers are placed correctly first time by either my SmartPhone or PPC.
If you're problem is regarding a slightly different issue then please expand on your problem by detailing what you mean by "modifying" your contact before you dial.
My problem is a little bit more complicated I think... I already has most number stored in the international dialing format... but my problem is that, depending on my location, I have to dial a certian set of numbers in front of the phone number to be dial in order for me to save on long distance and roaming... for example, while I am roaming in Mainland China if I want to dial home in Hong Kong with my mobile... normally, I will dial 0085226****88 but that will cost me like USD2 per minute... but if I dial with a prefix of 17909 (hence I will type in: 179090085226****88) then my per minute charge will now be something like USD0.10 per minute... which is a huge saving especially when I make roaming and long distance call all the time... the same thing in Hong Kong, if I dial 1666 before I dial long distance, I will get a much higher savings over regular long distance... my problem is that I can not possibly store all of these information for all the locations that I am going to be in, each places that I am going to be in, have a different sets of number... so is there any intellegent way to add additional numbers in front of the number stored in the contacts before it is being dialed in pocket pc? I know on my old palm... I can solve this problem in two ways... 1) I can set a certain dialing prefix before the system dial any number (normally I leave that blank, as I prefer edit before dial function)... I can use this prefix function but it will require me to change the prefix when I am at a different location but it is a workable solutions... is there something like that in PPC? 2) The second way to solve this was the edit before dialing function on the palm... I just click on the number, it allows me to edit the number temporary before it is automatically paste onto the phone software and before the phone dials it...
Anyway, I know this is very complicated and it is a very rare issues thats probably just affecting me or a very small number of users... but it will be great if there's some simple solutions to this... but I think this problem is mainly due to the lack of flexiblilty in the contact list rather then the function of the phone itself! :O) Anyway, thank you very much for your help and suggestions again... very much appriciate it :O) Peter
Try if this works
http://www.handango.com/Platform ... sp?productId=152403
Can you please post the link again? It doesn't work :O) Thanks for your help :O) What kind of program is it? :O)
here's the link
[url]http://www.handango.com/Plat...Type=2&catalog=0§ionId=0&productId=152403
[/url]
you got it all wrong
... if you ask me: your approach is wrong. Here are the basics. Windows XP, for instance and Outlook, that is the source of the contacts (and phone numbers and other details that are entered), stores phone numbers in this 'international' format:
country code (MS has a list of countries and codes of its own)
are code (another, separate field) and
number
If you respect the fields provided by Outlook then you get a number generated by Outlook that looks like this:
+381 (064) 6185250
THIS is the 'correct' international format recognised by Microsoft Phone Dialer (well not actually MS but Active Voice, but that is a completely different issue)
My point is that +448704364673 is NOT a correct international phormat, because MS cannot differentiate between the international country code and long distance (area code) and therefore the phone dialer cannot parse the numbers correctly.
NOW, how to get the system to know WHERE you are and should it use the area code when dialing or you are in the area your friend is, or you want to call a toll free number that is in 'another' area, or you are dialing a client abroad etc. Well, there is the 'Dialing Rules' settings! THERE you create a profile (home, office, abroad etc.) and provide the area code for the dialer to differentiate...
This is all well with the Windows XP/Outlook 2002+ I know well, BUT when it comes to PPC... sorry, I have the same problem...>
FACTS:
fact no. 1: Outlook separates phone numbers in groups of>
country code
long distance code (area code)
number
fact no. 2: phone numbers entered this way are stored in a format>
+381 (064) 6185250
fact no. 2: Microsoft Phone Dialer recognises this number and dials correctly
via a voice modem... (headset or speaker/mike required)
Question: what hapens when contacts entered this way into Outlook are sunchronized with the
Pocket PC (Windows Mobile 5.0)?
Answer : all contact's numbers are entered into the Contacts list in the 'correct' format.
(the same format with the bracket, as is noted in PC Outlook)
My findings: the problem arrises when you use your mobile capable Pocket PC
(i.e. the super cool Qtek 9000) and try to dial someone on to his mobile or office phone that are on another
area code...
the Pocket PC, or Windows Mobile 'Phone dialer' dials EXACTLY
as the number is entered in the above mentioned format
(the mobile operator recognises the + at the beggining of the number, but
does not understand the spaces and the brackets!!! and offcourse
the mobile operator returns an error voice message that a wrong number has been dialed!
What am I to do?
Can I find/download/install a proper phone dialer (i.e. MS Phone Dialer) that comes with Windows?
Phone Dialer 1.5
Developed for Microsoft by Active Voice
http://www.activevoice.com/dialer
bottom line is that CISCO systems aquired this Phone Dialer in 2001 and Active Voice discontinued developing/supporting whit app. (link on the Active Voice site is outdated and no support on MS site, as well)
(please do not post solutions as: "you should reformat your number entries etc. because I have 800+ contacts and counting...)
P.S. what I gathered is that this is not device related it is just OS and app related. I had the same problem with my previous Nokia phone... (I did not solve. Actually I thought I will solve with this device...)
I've set the Dialing Rules with my country code and area code (Mobile etc.) So, I don't have a clue what am I doung wrong
Hello,
I have recently upgraded my JasJam from my cellular carrier's WM5 ROM to Schap's 4.20 WM6 Rom. Everything is good, however there's one annoying issue with the way that phone numbers are displayed in caller id.
The problem in Israel is that land lines have a two digit area code and cellular numbers have three digit area code. Is there a way to change the way that phone numbers are displayed in caller id? Basically, I would like to remove the parenthesis and the spaces and see the number in one string.
Thanks!
I have a similar problem. costa rica has 8 digit ph numbers with no area codes. so I get 3 digits in bracket followed by 3 more #'s - 2 numbers. very confusing. any help is greatly appreciated.
Thanks,
Joe
have you tried changing your regional settings?
XtreMe_G said:
have you tried changing your regional settings?
Click to expand...
Click to collapse
Yes I did. No luck.
Anyone else? I'm sure there's a ph format somewhere, registry edit maybe?
Joe
I have been using touch 4.01 for a while now and I really like it. The only problem I have is when it comes to making calls (the main reason for a phone).
When I go to contacts and try to display a list, all I get is a list of contacts that I have already made a call to (i.e. history) not the actual list from my sim card. I thought that maybe my sim was not being read but when I start to dial a number (If I happen to know it) It will come up with the persons name. Unfortunately If I don't know the number I can't dial them.
The only way I have been able to work round this is to go to favorite people and add a new person (as from here it will display the whole contact list). Unfortunately favourite people can only hold 8 numbers.
Basically I want to know how to show my contact list that is on my sim card and not the numbers I have already dialed.
Thanks in advance but It's really starting to bug me now.
Khalid
May U run SIM Manager in Program/Accesories and copy all contact to Your PPC or run Advanced Config in Settings, line "Show Sim Contact" and active "Yes" and Reset your PPC.
Goodluck
Dear All,
I am looking for the answering machine for Excalibur, is that possible to have it.
Respect for All
KARAN ADHIKARI
GUJARAT-INDIA
What do you mean "Answering Machine"..
When you don't pick up a call, the DASH will forward it to a certain phone number which acts as the Answer Machine...for T-Mobile for instance, it goes to a T-Mobile Number specific to your phone that is your answering 'machine'.
If you want to know how to change the number here is how :
Go to SETTINGS
Click on PHONE
Click on CALL FORWARDING
Under Call Forwarding there are multiple different instances...Click on each and it should let you change the phone number there...
Hope this helps
Thank You
Sir, I will not help me because I am from India hence using the local service providers.
Thnx..
Sorry, I did not really get your question initially then.
Is it that you want the message from the Excalibur's Answering Machine (ie. to use on other phones)? Or do you want to know what the number is?
Regardless of what country or area you are in, as long as you are on a network, there should be a "call forward" number for most (if not all) of those instances I mentioned above.
If you are asking if you could get a copy of the answering machine, you can surly get an audio copy by using a program to record the call (Search the forums, the name escapes me), however you can't get the (if you have it) "press ... to do this" and so on, as that is specific to the programming on the answering machine.
I hope this helps.
If once again, I don't seem to have understood your question correctly, could you please clarify a bit?
Hello to all ANDRO GURU,
here is my "painless" story:
My friend takes my phone (HTC Desire), he own (HTC Sensation) and enter this code *#30# whitch is from nokia codes to show call id or something like. On sensation phone shows "MMI code started" and "call id enabled". On desire it shows "Incoming caller id service has been disabled", and that`s it after this small five digit entering my phone won`t show numbers, all are "Unknown".
1. The SIM card tested on another phone- everything is fine, so from operator call id is ON !!!!!
What I want from You - maybe anyone knows where in the phone software is this small thing whitch describes CALL ID ENABLED/DISABLED.
DOES ANYONE HAVE SOME EXPLAINATION !!!!!
I don`t want to factory reset at least not now. Sure the easiest way is to put some backup software create full phone backup and trahbabah to factory default.
SEARCHING for Answers