Develop Bugs

ROM upgrade error 296 (upgrade only)

Hello
I've searched on this forum and can't find the answer to my specific question.
I upgraded a while back to MrClean AKU 2.3 and now I need to downgrade because the unit needs to be sent back under warranty due to screen alignment issues.
So I unpacked the i-mate WWE ROM, and replaced the ROMUpdateUtility from that with the ROMUpdateUtility_Wizard_NoID.exe, which I downloaded from the XDA FTP site. (This is because using the standard one supplied gives a ROM upgrade error 296: UPGRADE ONLY error.)
As far as I can make out, the ROMUpdateUtility_Wizard_NoID.exe is just patched to not validate the current version when upgrading.
"Brilliant, this should work", I think.
But I get the following error:
"ERROR [238]: FILE READ... the update utility cannot open the requested file. Please check your update utility"
(see here http://static.flickr.com/111/306871020_8aa37f337e_o.gif)
Please help, anyone, I am coming up to the end of my warranty period and reeeeally want to get this crappy broken screen alignment problem sorted!
Thanks in advance

* bump *
Hope it's not considered rude to bump here, just would love to solve this problem as tis driving me a bit mad
Many thanks in advance

msmobiles.com:
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
Click to expand...
Click to collapse

Hey
Thanks for the tip. You were right, it must have been a corrupt .nbf file.
I tried to downgrade and the progress bar started and finished and all seemed to go well.
But when I boot up again I get the white MrClean ROM splash screen still!
Is it possible the update was done but the splash screen was not replaced?
Or perhaps the update wasn't actually done? Which version number do I look for? I used the .nbf file packaged in with the imate ROM K-JAM_WWE_1010903_106_10110_ship.exe
Please help!

try using this rom to downgrade with... after that you should be able to upgrade to any official rom. Make sure that you pick an official one as the above rom downgrades the ipl/spl as well.
ohh... and make sure that you restore the CID lock as well, they might be get rather cranky otherwise...
Good luck

Hello
Thank you so much for the reply, I really appreciate the advice. I would feel so out-there-on-my-own without it! I bought the imate off contract from expansys and it was really expensive and so really don't want it to end up a brick as I can't afford another right now!
I successfully downgraded to that QTEK custom ROM.
But now when I upgrade again to K-JAM_WWE_216901_2169101_020710_ship (latest).exe from that QTEK ROM, it doesn't work! Upgrade error again [ERROR 296]
Here are the screens I get:
http://static.flickr.com/114/309671629_756dc86b9d_o.gif
http://static.flickr.com/107/309671652_327adfb432_o.gif
Thanks again
Mat

Just to clarify... is the phone CID-locked? You might also want to try flashing it with the K-JAM_WWE_1010903_106_10110_ship.exe ROM before upgrading it... you can also try putting the phone in bootloader mode, press and keep pressed both the keys on the right side and then insert the pen in the resetbutton, before trying the upgrade...
EDIT: msmobiles.com shows the following regarding the particular error:
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Click to expand...
Click to collapse

Hey Nomad
Thanks again for the advice. This is all really really helpful. Going to try what you suggested a bit later.
I think I CID unlocked the phone - to be honest it was a while ago and I just remember blindly following someone's instructions (I was at a point of desperation at the time for another reason!)
Either way, I am pretty sure it would have to have been CID unlocked because I flashed the ROM from the imate default one to the MrClean one.
I did some initial looking around about CID relocking the device but still not sure how. Does the lockiwiz give the option of locking the CID as well as unlocking it?
Thanks!
Mat

I flashed from the QTEK custom ROM to the K-JAM_WWE_1010903_106_10110_ship.exe after doing that special reset whilst in the bootloader. This flash upgrade worked but again it didn't remove the splash screen from the QTEK custom ROM.
But now whenever I try to flash to the latest imate ROM K-JAM_WWE_216901_2169101_020710_ship.exe using the default RUU I get ERROR [296] UPGRADE ONLY.
And when I try to flash to the same ROM using the noID RUU I get ERROR [238]: FILE READ ERROR.
(On that last one, I have re-downloaded both the noID RUU and the extractable archive K-JAM_WWE_216901_2169101_020710_ship.exe from the XDA FTP.
So, I'm still unable to get my ROM to the imate version! Many thanks for your help!
Mat

US Diamond (pregame)

Hello XDA Friends!
I have done 2 solid nights of reading now - not to say I am in the least bit an expert, but this is my second experience with flashing htc phones (previously had a htc wizard). I am not a complete newb, but I have a few unanswered questions before i jump in balls deep.
1) After searching the forums, I have found that I seem to have a (rare) ROM version - 1.93.422.4 WWE to be exact. It is the stock US 3G GSM ROM. It appears that others have (after hardSPL) successfully flashed their Diamonds accordingly with European versions. I went to HTC's website and registered my Diamond and they told me that they do not have a down-loadable version of their ROM (an official HTC ROM) for the 3G US version. HTC simply does not make a version for US 3G that they release.
-"Unfortunately, after some checking on our website with your serial numbers, we have found that currently there is no ROM update for your devices. From our experience, there is almost never an update developed for unlocked US GSM devices. The way we release our updates is we develop them first (after receiving the operating system from Microsoft). Then the carrier or vendor takes the update and modifies it to fit their policies and we release it. Unfortunately, the vendor that usually sells unlocked US devices does not complete the last step." -HTC
This concerns me as this is my fallback in the event things do not go so well for me while flashing. SOOOO all that said, does anyone have a copy of the ROM lying around for my backup benefit!?!
2) Can anyone with a US diamond verify that they are indeed running with a cooked ROM (and be so kind as to suggest which one they prefer?). Obviously its trial and error, but stability and speed are high on the priority list (stock is SOOOO SLOOOW)!
3) The hard reset is confusing me. HTC rep said that if i do a hard reset that it will restore the device to factory settings, thus no need for me to download a ROM to restore the device (i obviously did not tell him i was looking into cooked ROMS!).
-" As far as a ROM that would restore the device, you would simply need to do a hard reset in the even that the ROM became corrupt. This would restore the device to factory defaults. " - HTC
This would indicate that the ROM is somewhere on the internal 4gb storage and copies itself back to the ROM. Is this erased when upgrading ROMS or becomes unavailable after going to hardspl? or would i still have the option to hard reset (take the red pill) and wake up believing that my dance with cooked ROMS was a dream!?!?
Thanks for all your help - fire away - I have thick skin. I'm sure someone will point out my lack of research skills ;p
Long live Xda,
-Nate

I have an unlocked US GSM also. I also tried to get it off the site and it said it was not for my device...
HTC support is pretty much useless, I called and they told me over the phone that my phone wont run WWE roms and that i needed US roms and i told them thats funny because it came preloaded with 1.93WWE.
Anyways The New official rom will work on your phone and its allot faster than the 1.93
First the Hard SPL i used this.
I use this RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
http://forum.xda-developers.com/showthread.php?t=400950
And if you want the official 2.03 WWE ROM its here
Want this one
RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
http://forum.xda-developers.com/showthread.php?t=471699
I haven't used any cooked ROMS yet so i cant help you out there

Awesome - thanks for the info - that was exactly what i was looking for! Yea... the fact that it says WWE in the ROM is completely contradicting - HTC tech support doesn't seem to know whats going on.
Have you tried the hard reset since you loaded the new ROMs? does it revert to 1.93?
Thanks again for posting,
-Nate

ok all,
flashed to hardSPL olinex 1.40, confirmed in the bootloader, tried to flash to 2.03WWE (as referred to me from above) and it gives me:
Error [244] : invalid model ID
This update utility cannot be used for your pda phone. please check your update utility.
OK. from reading i gather this is because something is wrong with hardSPL? what hardSPL should i use? Or is it another issue entirely?
thanks,
-Nate
btw - after hardSPL, and hard reset, everything on the internal storage is there

perhaps i need to be more specific. When i enter the bootloader, it says:
DIAM100 MFG 64M
SPL-1.40.OliNex
what the bible says it should say is
Hard SPL 1.40.Olinex
DIAM100 MFG 64M
SPL-1.40.OliNex
Does this mean that it did not upgrade correctly? Any ideas? Im trying win 1.37 OliNex
again it says in the bootloader
DIAM100 MFG 64M
SPL-1.37.OliNex
lets me get all the way to 99% and then fails with
Error 270 :update error
The image file is corrupt. please check your update utility.
I need some help guys. Starting to get a little frustrated do you have to update the radio rom before it will take the main rom?
-Nate
Ok, next update. Could not get any of the olix hard SPLs to work. I have tried to upgrade to hardSPL 1.24 per this thread
http://forum.xda-developers.com/showthread.php?t=408621
only problem is that the phone does not ever boot into windows. When i go into the bootloader, it still shows olix 1.37 hard SPL. I have tried re-downloading the file. So far it gets to 100% of the ROM flash and then throws the error 270. Any thoughts?

I never had this problem but on the page were you got the ROM they say if your having issues installing through the update utility to do this.
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <--
Follow instructions on screen
Anymore problems just read this through the thread were you got the ROM your not the only one who got the "corrupted 270 error".
But flashing it from the storage card should work . ..Goodluck
http://forum.xda-developers.com/showthread.php?t=471699

Ok all,
I have had a hell of a time getting a rom that will install. I could repeatedly get to the bootloader without a problem, and every rom i flashed after installing olinex 1.37 allowed me to get all the way to 100% but would then tell me that the rom was corrupt.
I downloaded and installed Shaks rom, version 3.20 from
http://diamond.geg0r.de/index.php?dir=Shaks/V3.20/
AND ITS BACK INTO WINDOWS!!!!!! thanks GOD!
I will report on further issues i have with the device.
-Nate

When I try to burn the 2.03 WWE ROM mentioned onto my stock US Diamond I get: Error 294: Invalid Vendor ID.
Any ideas what I need to do? I did not change the SPL - must I do that?
I read through the referenced threads and see where people with Error 270 need to put the image file onto internal storage but I have been hesitant to try that since it for Error 270 and not necessarily Error 294.
Any ideas?
Thanks!

wpsantennas said:
When I try to burn the 2.03 WWE ROM mentioned onto my stock US Diamond I get: Error 294: Invalid Vendor ID.
Any ideas what I need to do? I did not change the SPL - must I do that?
I read through the referenced threads and see where people with Error 270 need to put the image file onto internal storage but I have been hesitant to try that since it for Error 270 and not necessarily Error 294.
Any ideas?
Thanks!
Click to expand...
Click to collapse
You need to upgrade to HardSPL.

demo23019 said:
I never had this problem but on the page were you got the ROM they say if your having issues installing through the update utility to do this.
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <--
Follow instructions on screen
Anymore problems just read this through the thread were you got the ROM your not the only one who got the "corrupted 270 error".
But flashing it from the storage card should work . ..Goodluck
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
Here is the Rom only if anybody wants to flash it. You will not get the invalid ID error.
http://www.sendspace.com/file/iesg1h

Thanks for everybody's help. Burning the new SPL did the trick.
Have tweaked everything pretty much back to how I like it and am quite happy with the new ROM. My only complaint is that I prefer the larger Compact QWERTY keypad of the 1.93 ROM since I have fat fingers. I know that I can dig that keypad up elsewhere but I'll try to get used to the new one first.
Thanks again.

Upgrade ROM code error ??

Learned folk....
I just tried to "upgrade" to the latest stock shipped HTC Diamond ROM:
_HTC Touch Diamond_MR_RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
..only to get a Upgrade ROM code error after going through the motions of flashing. I have SPL-1.40.OliNex installed and security unlocked...
...will try agin, but I suspect this should work....anyone else had this issue...am I missing something here?!?!
All help greatly appreciated as I am in bootloader screen and not sure where to go to next....

....more detail...
....just to add, I get
Error [270]: Update error
The image file is corrupted. Please check your Update Utility
er, do I have to revert back to the original SPL to run a HTC ROM??
Thanks in advance......

hi with this shipped rom you need to flash from the internal storage.
see here http://forum.xda-developers.com/showthread.php?t=480022

Cheers cobbs....sorted!!
Many thanks mate!

[Q] need to reflash after ROM upate error

I am new here.but not new into development I updated all my PC's and Macs and used Coreboot and Flashrom there.
I want to cook a fast and finger-friendly 21xxx ROM later.
I post here because I made a flashing mistake on my G3 Universal last week.
I tried to update the Radio ROM and then to Tomal v10 ROM,but got a error
from the RUU,it could be I was missing the extrom or had wrong filenames.
I cant boot 6.5.3 now,but can enter Bootloader mode.
I read the wiki but it didn't help me.I found no docs for the Update Utility.
Now I need help how to flash the phone correctly.

the simplest way is to flash from your bootloader mode any official rom. don't pay attention on extrom. what kind of error did you receive while upgrading?

I remember it was error 114.The tool wrote that it goes into recovery but if I
clicked on the recover button it crashed.

Doc format or MTTY may help

cannot upgrade firmware on HTC touch diamond

Hi all,
I am trying to update firmware on my HTC touch diamond. Current installed version is : 1.34.831.1, I am upgrading to version: 2.03.871.4
I`m using RUU_Diamond_SingTel_WWE_2.03.871.4_Radio_Signed_Diamond_52.44.25.24_1.08.25.20M1_Ship file for this, downloaded from http://www.htc.com/sea/help/htc-touch-diamond/#download
Update process starts and then fails with message Error [294]: Invalid Vendor ID
I`ve followed some ideas from http://forum.xda-developers.com/showthread.php?t=405659 and tried running executable with and without compatability mode. same result each time.
can someone please tell what am I doing wrong?
many thanks

outstream said:
Hi all,
I am trying to update firmware on my HTC touch diamond. Current installed version is : 1.34.831.1, I am upgrading to version: 2.03.871.4
I`m using RUU_Diamond_SingTel_WWE_2.03.871.4_Radio_Signed_Diamond_52.44.25.24_1.08.25.20M1_Ship file for this, downloaded from http://www.htc.com/sea/help/htc-touch-diamond/#download
Update process starts and then fails with message Error [294]: Invalid Vendor ID
I`ve followed some ideas from http://forum.xda-developers.com/showthread.php?t=405659 and tried running executable with and without compatability mode. same result each time.
can someone please tell what am I doing wrong?
many thanks
Click to expand...
Click to collapse
You have the wrong file, you can do Hard SPL:
http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2

Thanks.
I was able to do Hard SPL and then upgrade it to latest firmware using RUU_Diamond_SingTel_WWE_2.03.871.4_Radio_Signed_Di amond_52.44.25.24_1.08.25.20M1_Ship
Thanks for your help