Hello
I've searched on this forum and can't find the answer to my specific question.
I upgraded a while back to MrClean AKU 2.3 and now I need to downgrade because the unit needs to be sent back under warranty due to screen alignment issues.
So I unpacked the i-mate WWE ROM, and replaced the ROMUpdateUtility from that with the ROMUpdateUtility_Wizard_NoID.exe, which I downloaded from the XDA FTP site. (This is because using the standard one supplied gives a ROM upgrade error 296: UPGRADE ONLY error.)
As far as I can make out, the ROMUpdateUtility_Wizard_NoID.exe is just patched to not validate the current version when upgrading.
"Brilliant, this should work", I think.
But I get the following error:
"ERROR [238]: FILE READ... the update utility cannot open the requested file. Please check your update utility"
(see here http://static.flickr.com/111/306871020_8aa37f337e_o.gif)
Please help, anyone, I am coming up to the end of my warranty period and reeeeally want to get this crappy broken screen alignment problem sorted!
Thanks in advance
* bump *
Hope it's not considered rude to bump here, just would love to solve this problem as tis driving me a bit mad
Many thanks in advance
msmobiles.com:
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
Click to expand...
Click to collapse
Hey
Thanks for the tip. You were right, it must have been a corrupt .nbf file.
I tried to downgrade and the progress bar started and finished and all seemed to go well.
But when I boot up again I get the white MrClean ROM splash screen still!
Is it possible the update was done but the splash screen was not replaced?
Or perhaps the update wasn't actually done? Which version number do I look for? I used the .nbf file packaged in with the imate ROM K-JAM_WWE_1010903_106_10110_ship.exe
Please help!
try using this rom to downgrade with... after that you should be able to upgrade to any official rom. Make sure that you pick an official one as the above rom downgrades the ipl/spl as well.
ohh... and make sure that you restore the CID lock as well, they might be get rather cranky otherwise...
Good luck
Hello
Thank you so much for the reply, I really appreciate the advice. I would feel so out-there-on-my-own without it! I bought the imate off contract from expansys and it was really expensive and so really don't want it to end up a brick as I can't afford another right now!
I successfully downgraded to that QTEK custom ROM.
But now when I upgrade again to K-JAM_WWE_216901_2169101_020710_ship (latest).exe from that QTEK ROM, it doesn't work! Upgrade error again [ERROR 296]
Here are the screens I get:
http://static.flickr.com/114/309671629_756dc86b9d_o.gif
http://static.flickr.com/107/309671652_327adfb432_o.gif
Thanks again
Mat
Just to clarify... is the phone CID-locked? You might also want to try flashing it with the K-JAM_WWE_1010903_106_10110_ship.exe ROM before upgrading it... you can also try putting the phone in bootloader mode, press and keep pressed both the keys on the right side and then insert the pen in the resetbutton, before trying the upgrade...
EDIT: msmobiles.com shows the following regarding the particular error:
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Click to expand...
Click to collapse
Hey Nomad
Thanks again for the advice. This is all really really helpful. Going to try what you suggested a bit later.
I think I CID unlocked the phone - to be honest it was a while ago and I just remember blindly following someone's instructions (I was at a point of desperation at the time for another reason!)
Either way, I am pretty sure it would have to have been CID unlocked because I flashed the ROM from the imate default one to the MrClean one.
I did some initial looking around about CID relocking the device but still not sure how. Does the lockiwiz give the option of locking the CID as well as unlocking it?
Thanks!
Mat
I flashed from the QTEK custom ROM to the K-JAM_WWE_1010903_106_10110_ship.exe after doing that special reset whilst in the bootloader. This flash upgrade worked but again it didn't remove the splash screen from the QTEK custom ROM.
But now whenever I try to flash to the latest imate ROM K-JAM_WWE_216901_2169101_020710_ship.exe using the default RUU I get ERROR [296] UPGRADE ONLY.
And when I try to flash to the same ROM using the noID RUU I get ERROR [238]: FILE READ ERROR.
(On that last one, I have re-downloaded both the noID RUU and the extractable archive K-JAM_WWE_216901_2169101_020710_ship.exe from the XDA FTP.
So, I'm still unable to get my ROM to the imate version! Many thanks for your help!
Mat
Related
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
check you PM
It's already pretty much in the Wiki, maybe a 'downgrade' link would be prudent.
Upgrading and cooking: -> MrVanx Hermes upgrade guides -> SPL Downgrade Guide
IPL-1.00 / SPL-1.06? Is this working
Hi,
I just read through the mr vanx downgrade guide and found out that there is a downgrade package with IPL-1.00 and IPL-1.04 and a second one with IPL-1.01 and IPL-1.06.
Now, I have the problem that my device was shipped with IPL-1.00 and SPL-1.06? Apparently this is a strange combination as this is not downloadable at the mr vanx downgrade guide, so my question is. Can I simply extract the IPL-1.00 from one .nbh and SPL-1.06 from the other and recombine them using rombaker, or would a downgrade to this combination screw up my device?
Thanks for letting me know.
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
fone_fanatic said:
I'm on the same boat, I need to downgrade my JasJam to send it in.
I haven't researched at all yet, i've been pretty busy. when I get off work i'll look into it and see if I run into the problem your facing and we can atempt to solve it together.
Click to expand...
Click to collapse
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Do as ToddJG says, download the two files which i refer to in the guide.
Extract the IPLs and SPLs from the two files, mix and match.....BUT BE CAREFULL.......DONT FLASH UNLESS YOUR PREPARED TO DO IT.
ipl 1.00 and spl 1.06 will be fine.
make a single nbh from the mix and match combination then flash with customRUU.
What if i'm trying to flash the original shipped rom.. and i do the first step in your guide, then simply flash the shipped rom, or do i still have to extract the ipl and spl? (they're already extracted just wanting to know if its redundant if i recompile it with the rom i extracted them from.)
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
As with other downgrade guides this is NOT intended as a guide for claiming the warranty of the device having flashed components which are not authorised by the manufacturer or carrier.
Click to expand...
Click to collapse
?
fone_fanatic said:
Ok, just succesfully downgraded to IPL-1.00 and SPL-1.06. Now i'm gonna flash back to an imate shipped WM5 rom. but one problem with that... clubimate.com is only showing the extroms which are around 6mb when downloaded.. where can i get the full imate rom?
also mrvanx what do u mean by this:
Click to expand...
Click to collapse
It means that if you flashed unauthroized phone parts (like unofficial WM6 roms, radio upgrades and so on you have void your warranty). Of course if you can downgrade to your old rom nobody will notice that you did that.
But you have to be very careful on downgrading if you have also upgraded your radio I thinkk, cause you can brick your device (means having "NOGSM" after downgrading), see this note from mr. vanx downgrade guide for wm5:
NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.
Click to expand...
Click to collapse
Maybe you should follow mr. vanx downgrade guide for wm5 to make sure your on the safe side.
I thought he meant that it is still noticeable if you downgrade the IPL and SPL that it would be detected during warranty repairs but thats not the case...
I emailed I-Mate and they gave me an RMA# and had me purchase the $60.00 Diagnostic package from PocketPcTechs.com(They handle imate warranties in the US). So i did that, they emailed me with a form i should fill out and include it with my device when i ship it...
Did that, they sent me an email when they recieved my device, 15min after that i recieved another email that they were working on my devic, then Early the next day i get an email saying repairs are complete and its being ready to get shipped back to me... 15min an email with a tracking number saying its shipped....
Everything worked so smoothly, warranty was accepted, hopefully everything will be good when i get the device back (which should be today) I want to get rid of this ****ty iphone so bad!
todd_jg said:
Easiest thing to do is to download your original shipped ROM and extract the NBH file (using dutty's good nbh tool) and grab the IPL or SPL that you need and substitute that for the file from MrVanx. Just be careful what you flash - if you mix up the IPL and SPL file - InstaBrick! Trust me - I know
Click to expand...
Click to collapse
MrVanx instruction working just fine, however do not put your Hermes into Bootloader Mode. I've been trying the steps with my hermes in BootLoader Mode for many many times and it does not work. Leave it on OS mode. (Today) screen before you run the CustomRUU. Hope this help
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
GldRush98 said:
why is every one so paranoid about this....
has anyone EVER heard of a warranty being denied because of the software on it?
Click to expand...
Click to collapse
Yup cingular/ att will charge you for out of warranty work if its a different rom
Please help
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
thedude0420 said:
Guys I am having the same issue, I am exchanging my phone and need to downgrade. I followed MrVanx guide and downgraded to 1.10.olipro and now need to flash the original Cingular 8525 SPL back to the phone. The SPL that was shipped was 1.11. Where can I find the file to flash? I have been trying to find it with no luck. Could someone please help me out with this? Thank you very much!
Click to expand...
Click to collapse
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
todd_jg said:
Go to the wiki > hermes > original shipped wm5 roms and then decompile the rom with duttys good nbh tool. You will see an spl.nb file. Make that alone into an nbh file using duttys good nbh tool. Then flash to your hermes using the custom ruu.
Since you have successfully followed mrv's guide, you should probably know what all those things are.
Click to expand...
Click to collapse
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
thedude0420 said:
Man thank you so much for the fast reply! Having downgraded to 1.10.olipro and downloading the original rom exe, when I ran it (accidentally) it flashed the 1.11 SPL back to the phone for me. I didn't even have to use duttys tool. THANKS AGAIN!
Click to expand...
Click to collapse
No problem. I thought you already had the rom you wanted, but just needed to change the spl. Guess I gave the overly complex solution!
marcelser said:
Hi,
I have the following question. I currently have installed HardSPLv7 (so the device shows IPL-1.04 / SPL-2.20Olipro.
How exactly do I downgrade to my old IPL-1.00 / SPL-1.06 in case I have to hand-in my device for warranty reasons? I already searched through the forum and read that it can be done using sspl somehow but I couldn't find exact instructions.
Can anybody (maybe pof) give detailed instructions on how to downgrade to original ipl/spl from a .nbh with the correct ipl/spl files. I already prepared a .nbh with a spl-1.06 and the corresponding IPL extracted from an original vendor rom and put in my rebuilt dumped rom.
I also have the problem that I don't know where to get IPL-1.00, because on the page where to original roms are listed only the SPL version is noted, but not which ipl is in which rom. Can anybody tell me where I can get an IPL-1.00 .nb file?
Thanks for any help on this. I also think that maybe it could be interesting to put this onto the wiki if I anybody can answer this.
Thanks for any help.
Click to expand...
Click to collapse
Hey, maybe i come to late,
I had the same "problem", I had the Screen Aligment Issue. And I really wonderd myself if o2 have problem with my "Schaps ROM Version HardSPL" BUT there was no problem, they solved my Screen Aligment Issue. Afterwards I asked, what actually is bad for warrenty. Upgrading the Bootloader is no problem. But CID (Costumer ID) unlocking will may be evil. Anyway's for myself (the SA-Issue) was a hardware issue which has nothing todo with software facts like upgrading the bootloader...
dont be worried... i guess there will be no prob...
Hello XDA Friends!
I have done 2 solid nights of reading now - not to say I am in the least bit an expert, but this is my second experience with flashing htc phones (previously had a htc wizard). I am not a complete newb, but I have a few unanswered questions before i jump in balls deep.
1) After searching the forums, I have found that I seem to have a (rare) ROM version - 1.93.422.4 WWE to be exact. It is the stock US 3G GSM ROM. It appears that others have (after hardSPL) successfully flashed their Diamonds accordingly with European versions. I went to HTC's website and registered my Diamond and they told me that they do not have a down-loadable version of their ROM (an official HTC ROM) for the 3G US version. HTC simply does not make a version for US 3G that they release.
-"Unfortunately, after some checking on our website with your serial numbers, we have found that currently there is no ROM update for your devices. From our experience, there is almost never an update developed for unlocked US GSM devices. The way we release our updates is we develop them first (after receiving the operating system from Microsoft). Then the carrier or vendor takes the update and modifies it to fit their policies and we release it. Unfortunately, the vendor that usually sells unlocked US devices does not complete the last step." -HTC
This concerns me as this is my fallback in the event things do not go so well for me while flashing. SOOOO all that said, does anyone have a copy of the ROM lying around for my backup benefit!?!
2) Can anyone with a US diamond verify that they are indeed running with a cooked ROM (and be so kind as to suggest which one they prefer?). Obviously its trial and error, but stability and speed are high on the priority list (stock is SOOOO SLOOOW)!
3) The hard reset is confusing me. HTC rep said that if i do a hard reset that it will restore the device to factory settings, thus no need for me to download a ROM to restore the device (i obviously did not tell him i was looking into cooked ROMS!).
-" As far as a ROM that would restore the device, you would simply need to do a hard reset in the even that the ROM became corrupt. This would restore the device to factory defaults. " - HTC
This would indicate that the ROM is somewhere on the internal 4gb storage and copies itself back to the ROM. Is this erased when upgrading ROMS or becomes unavailable after going to hardspl? or would i still have the option to hard reset (take the red pill) and wake up believing that my dance with cooked ROMS was a dream!?!?
Thanks for all your help - fire away - I have thick skin. I'm sure someone will point out my lack of research skills ;p
Long live Xda,
-Nate
I have an unlocked US GSM also. I also tried to get it off the site and it said it was not for my device...
HTC support is pretty much useless, I called and they told me over the phone that my phone wont run WWE roms and that i needed US roms and i told them thats funny because it came preloaded with 1.93WWE.
Anyways The New official rom will work on your phone and its allot faster than the 1.93
First the Hard SPL i used this.
I use this RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
http://forum.xda-developers.com/showthread.php?t=400950
And if you want the official 2.03 WWE ROM its here
Want this one
RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
http://forum.xda-developers.com/showthread.php?t=471699
I haven't used any cooked ROMS yet so i cant help you out there
Awesome - thanks for the info - that was exactly what i was looking for! Yea... the fact that it says WWE in the ROM is completely contradicting - HTC tech support doesn't seem to know whats going on.
Have you tried the hard reset since you loaded the new ROMs? does it revert to 1.93?
Thanks again for posting,
-Nate
ok all,
flashed to hardSPL olinex 1.40, confirmed in the bootloader, tried to flash to 2.03WWE (as referred to me from above) and it gives me:
Error [244] : invalid model ID
This update utility cannot be used for your pda phone. please check your update utility.
OK. from reading i gather this is because something is wrong with hardSPL? what hardSPL should i use? Or is it another issue entirely?
thanks,
-Nate
btw - after hardSPL, and hard reset, everything on the internal storage is there
perhaps i need to be more specific. When i enter the bootloader, it says:
DIAM100 MFG 64M
SPL-1.40.OliNex
what the bible says it should say is
Hard SPL 1.40.Olinex
DIAM100 MFG 64M
SPL-1.40.OliNex
Does this mean that it did not upgrade correctly? Any ideas? Im trying win 1.37 OliNex
again it says in the bootloader
DIAM100 MFG 64M
SPL-1.37.OliNex
lets me get all the way to 99% and then fails with
Error 270 :update error
The image file is corrupt. please check your update utility.
I need some help guys. Starting to get a little frustrated do you have to update the radio rom before it will take the main rom?
-Nate
Ok, next update. Could not get any of the olix hard SPLs to work. I have tried to upgrade to hardSPL 1.24 per this thread
http://forum.xda-developers.com/showthread.php?t=408621
only problem is that the phone does not ever boot into windows. When i go into the bootloader, it still shows olix 1.37 hard SPL. I have tried re-downloading the file. So far it gets to 100% of the ROM flash and then throws the error 270. Any thoughts?
I never had this problem but on the page were you got the ROM they say if your having issues installing through the update utility to do this.
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <--
Follow instructions on screen
Anymore problems just read this through the thread were you got the ROM your not the only one who got the "corrupted 270 error".
But flashing it from the storage card should work . ..Goodluck
http://forum.xda-developers.com/showthread.php?t=471699
Ok all,
I have had a hell of a time getting a rom that will install. I could repeatedly get to the bootloader without a problem, and every rom i flashed after installing olinex 1.37 allowed me to get all the way to 100% but would then tell me that the rom was corrupt.
I downloaded and installed Shaks rom, version 3.20 from
http://diamond.geg0r.de/index.php?dir=Shaks/V3.20/
AND ITS BACK INTO WINDOWS!!!!!! thanks GOD!
I will report on further issues i have with the device.
-Nate
When I try to burn the 2.03 WWE ROM mentioned onto my stock US Diamond I get: Error 294: Invalid Vendor ID.
Any ideas what I need to do? I did not change the SPL - must I do that?
I read through the referenced threads and see where people with Error 270 need to put the image file onto internal storage but I have been hesitant to try that since it for Error 270 and not necessarily Error 294.
Any ideas?
Thanks!
wpsantennas said:
When I try to burn the 2.03 WWE ROM mentioned onto my stock US Diamond I get: Error 294: Invalid Vendor ID.
Any ideas what I need to do? I did not change the SPL - must I do that?
I read through the referenced threads and see where people with Error 270 need to put the image file onto internal storage but I have been hesitant to try that since it for Error 270 and not necessarily Error 294.
Any ideas?
Thanks!
Click to expand...
Click to collapse
You need to upgrade to HardSPL.
demo23019 said:
I never had this problem but on the page were you got the ROM they say if your having issues installing through the update utility to do this.
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <--
Follow instructions on screen
Anymore problems just read this through the thread were you got the ROM your not the only one who got the "corrupted 270 error".
But flashing it from the storage card should work . ..Goodluck
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
Here is the Rom only if anybody wants to flash it. You will not get the invalid ID error.
http://www.sendspace.com/file/iesg1h
Thanks for everybody's help. Burning the new SPL did the trick.
Have tweaked everything pretty much back to how I like it and am quite happy with the new ROM. My only complaint is that I prefer the larger Compact QWERTY keypad of the 1.93 ROM since I have fat fingers. I know that I can dig that keypad up elsewhere but I'll try to get used to the new one first.
Thanks again.
Hi all,
How to upgrade rom via bootlaoader menu (after pressing the camera and hardreset)? If it's possible could you tell me which ROM i can use to upgrade a HTC advantage x7500/ATHENA-C9 with these info on bootloader menu:
ATHE100
IPL-v1. 00
ATHE100
SPL-v1. 07. 0000
Thanks for help!
Hi marius
I read your other post today and seeing no one else has replied , I will try to help you.
Have you tried a hard reset ?
If you have and had no luck , try to find an original shipped rom consistent with your spl and flash while in bootloader .
Don't try to flash any of the doctored roms, either spl 1.2 or 3.5 as you will not be able.
It is a long time since I have used the unlocker but I think if you read through the later posts , the authors used a wrapper program that requires an initial activesync connection to work.
I will look in here occasionally to see if you get it sorted or you can pm me if you have a question.
regards michael
Hello Lakeman,
if i write you it's because i read your reply below and i'm very happy.
1rst, i tried hard reset but it didn't work.
In fact, here is my story:
My HTC x7500 crashes after startup so i can't use it but when i tried to flash it i received the error 294:Invalid Vendor Id because i used the wrong ROM. where can i get it please?
Many thanks!
I asume you already read the Wiki, if not here it is!:
http://wiki.xda-developers.com/index.php?pagename=HTC_Athena
I´m sure it can help you a lot
Good luck,
hi all,
thank you orb3000, i read the wiki and i found in the ATHENA x7500 manual that it's possible to Upgrade OS through SD Card in bootloader menu but it seems like the download OS image link http://htcscm10.htc.com.tw/SDO is no longer available. Please could someone help me found it?
Thanks a lot!
Hi all,
i tried to upgrade my HTC x7500 via SD card using a .nbh file found in ap3.rar
but it didn't work. After enter in the bootloader, it displays "loading..." and "00068002" and after few seconds it's going back to the colored screen displaying the Rom version 1.07.0000
What does the "0068002" mean? i suppose it's an error code.
Please could somebody help me get a image file version earlier than 1.07.0000?
thnks!
marius.alain said:
Hi all,
i tried to upgrade my HTC x7500 via SD card using a .nbh file found in ap3.rar
but it didn't work. After enter in the bootloader, it displays "loading..." and "00068002" and after few seconds it's going back to the colored screen displaying the Rom version 1.07.0000
What does the "0068002" mean? i suppose it's an error code.
Please could somebody help me get a image file version earlier than 1.07.0000?
thnks!
Click to expand...
Click to collapse
Hi marius
I assume you read
[/QUOTE]
Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD. After finished, do a soft reset.
[/QUOTE]
sometimes sd flashing wont work with an sdhc card
but in any case you have not unlocked the rom yet.
You need spl 1.2 to flash the ap3 rom
I cant remember if you are the guy trying to find a dutch rom but try and find an original rom for your athena and then flash that.
once it is working you can apply the unlocker and then flash any rom
Hi lakeman,
Unfortunately i can't use the spl 1.2 to unlock my HTC X7500 because it crashes just after startup (when displaying desktop) preventing me from using. Is there a possibility to use the spl 1.2 via the miniSD card? I'm not using the sdhc card.
Thanks for help!
hi again
youmust unlock the athena before flashing an spl1.2 rom
you can flash your original rom from the bootloader menu to get a working rom ,
once you have done this you can use the unlocker and then flash any 1.2rom
Hi,
i tried to flash my ROM with this: Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship found in the Wiki but it failed, i received ERROR 294: INVALID VENDOR ID. i get this error many times while trying to flach my ROM.
My ROM version is 1.07.0000, please do you know where i can find the same version or one which will work?
Thanks.
marius.alain said:
Hi,
i tried to flash my ROM with this: Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship found in the Wiki but it failed, i received ERROR 294: INVALID VENDOR ID. i get this error many times while trying to flach my ROM.
My ROM version is 1.07.0000, please do you know where i can find the same version or one which will work?
Thanks.
Click to expand...
Click to collapse
Marius you need to get the original language rom that came with your athena
I don't know for sure but i think spl 1.07 is the dutch rom which is nowhere to be found at present
i suggest doing a search for this or contacting htc or the original supplier of your phone.
Alternatively post a request in xda but I would do it in the general section to get a wider audience
Hello,
Thanks Lakeman. I tried to get it from HTC Support in vain, as you recomended, i'll post a new thread on xda concerning the spl1.07 (my ROM language is English not dutch).
Regards.
marius.alain said:
Hello,
Thanks Lakeman. I tried to get it from HTC Support in vain, as you recomended, i'll post a new thread on xda concerning the spl1.07 (my ROM language is English not dutch).
Regards.
Click to expand...
Click to collapse
I had another thought.
Have you tried flashing the dopod roms from here
ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
or does your machine have tmobile branding , in which case you could try the tmobile roms
regards michael
lakeman said:
I had another thought.
Have you tried flashing the dopod roms from here
ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
or does your machine have tmobile branding , in which case you could try the tmobile roms
regards michael
Click to expand...
Click to collapse
hello,
when trying to connect to ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/ i get this message: 503 Permission denied. I suppose i haven't rights to access the Ftp server, could you tell me how can i do to get the dopop roms?
Thanks!
Morning All,
So as you can see in my sig I have upgraded to the HTC Desire .
Now I want to downgrade my Diamond back to stock so that I can sell her however I have run into a huge problem. I found these instructions:
http://forum.xda-developers.com/showthread.php?t=537496
And followed it completly, I went and got the ROM from HTC's site and when I went to flash the ROM it got to 100% only to tell me that the image file is corrupt please check the RUU Error code 720. I have tried two ROMS the one from HTC: RUU_Diamond_HTC_WWE-AFK_2.03.421.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship And another one: _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship however I think both are the same... . I downloaded that ROM from here: http://forum.xda-developers.com/showthread.php?t=471699
So the question is how do I downgrade? I have since put back the Custom Memo ROM I was using.
Radio: 1.17
HardSPL: 1.93
I should mention that the phone was bought last year and came with a SPL higher than 1.93 think it was 2.03, I did downgrade to 1.93. Could this be causing the problem? When I did some Googling I found this: http://forums.techarena.in/portable-devices/1163528.htm
Upgrade error number 270 means that the bootloader is not correct for the rom you are trying to flash
Click to expand...
Click to collapse
So how do I find the ROM with the matching bootloader?
Any help is greatly appreciated .
This is relevant to my interests. Im sitting with nearly the exact same issue...
Ok, so I found a quick easy workaround.
Install your stock ROM till completion. It goves you the error, then download this update.... PM or msn me for the link, theres some block for me posting links
run that (takes about 2 min), phone reboots, stock rom is in use. HardSPL is however still intact. Haven't figured how to remove that yet.
Cheers. Drop me a line on msn sometime R...
Hello,
I'm posting here in desperation, I really hope someone could help me.
I've recently bought a HTC Desire from O2. It was running Android 2.2 but I flashed cyanogenmod to it along with the latest radio.
Cyanogenmod worked fine but the radio stopped my 3G internet from working. In the end I decided to simply revert back to original setup using a RUU.
Anyway, to cut a long story short, the first RUU I tried ALMOST worked but then failed claiming a file was missing and that I needed to try a complete RUU.
From that point onwards I have been unable to find an RUU that will work - I constantly receive error code 140, bootloader version error.
Can anyone please tell me how to circumvent this error OR provide me with an O2 RUU that will work?
Here's the spec from my startup screen:
BRAVO PVT4 SHIP S-ON
HBOOT 0.93.0001
MICROP - 051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Please note that the only option I have available to me from the boot-menu is RUU - Any option to enter recovery mode is not visible.
Please please help me, thank you so much in advance.
I wish I could give helpful advice...
I'm gonna try though.
Download one of the latest RUU's from here.
Perhaps your RUU was a bit old?
I've only ever done RUU once, when sending my phone back for repair. I encountered another issue.
To the OP, which RUU are u trying to use?
Sent from my HTC Desire using XDA Premium App
Make sure you've got a goldcard then do the downgrade. After that you should be able to do any RUU you like.
Lol just try a different radio. Have you manually set your APN?
dehaani said:
Make sure you've got a goldcard then do the downgrade. After that you should be able to do any RUU you like.
Click to expand...
Click to collapse
Hi dehaani. In order to run the downgrade utility I surely need to be able to access my device (to enable usb debugging ) I currently can't get further than a grey HTC logo with exclamation marks in the corners? Is there a way to downgrade without the need to boot in to a ROM?
I've tried running almost all RUU I can find online, most of them result in Error 140: Bootloader version error.
I can't flash another radio because the only option I have available to me in bootloader is "RUU", no option to restore etc. How do I manually set my APN?! Would this involve access to the phone too?
Thank you all so much for your responses so far, please keep helping.
try again hope good luck
This might have been pot luck on my part getting through to someone who knew their stuff, but I had a problem when flashing Oxygen RC7 to my desire.
I had to ring o2 about another contract I have, used by a family member, and they asked if there was anything else they could help with so I jokingly replied "not unless you know about flashing replacement ROMs..." would you Adam & Eve it, the clever little badger only went and talked me through the issue I had come across on my Desire.
Might be worth giving them a bell if you cant find a solution online, I've always found them very helpful.
dvjones89 said:
Hi dehaani. In order to run the downgrade utility I surely need to be able to access my device (to enable usb debugging ) I currently can't get further than a grey HTC logo with exclamation marks in the corners? Is there a way to downgrade without the need to boot in to a ROM?
I've tried running almost all RUU I can find online, most of them result in Error 140: Bootloader version error.
I can't flash another radio because the only option I have available to me in bootloader is "RUU", no option to restore etc. How do I manually set my APN?! Would this involve access to the phone too?
Thank you all so much for your responses so far, please keep helping.
Click to expand...
Click to collapse
If you answer my question we might be able to help a bit more. this is the latest o2 UK RUU
http://www.multiupload.com/7YMY6RLCKY