Hi man! I have a xda orbit, it has the touch damaged(visible) and nothing appears on the screen and the back light remains off but it turns on and plays the music.
With my pc I have seen that it stays on the calibrating image.
Could I skip the calibration procedure via software? I think I could overwrite some file taking them from my other ppc.
THNX
Related
Hello to all of you..
My P3300 does not calibrate its screen. How can i bypass the screen ''Tap the screen to set up your device and the calibration.
It seems that the touch screen does not work, but when light goes out if i touch the screen the light goes on! That seems that the screen works, correct?
How can this happen?
Need Help please..
can you use device normally?
I have the same kind of problem with my Kaiser. The screen works fine in all applications. But when I try to do a calibration it's completely dead, tap wise. No matter what I do it doesn't allow me to do the first calibration tap at the center of the screen. I then have to soft-reset to get out of the calibration screen. The device then works fine....but I still can't d a calibration.
Does anybody have an idea of why this is happening?
!
i thought this might could be a software problem and i upgrade my rom but i still have the problem.
Now i can't use my device because its the first boot and i must do calibration.
I'll try to open it...
Hey guys so my Tilt 2 has been having an issue when I put it to sleep. It goes to sleep fine, but when I wake it up the screen remains black. The actual device turns on, but the screen stays black. I can still make calls, receive calls, play music, etc. but I have to soft reset the device if I want to be able to see what I am doing.
From what I can tell my problem is different from the normal Sleep of Death issue where the device simply won't wake up.
I've searched through the forums looking for solutions and have tried pretty much everything from doing a hard reset, using different roms, formatting the internal memory, etc. Even after doing all of this, my device still suffers from this issue.
Any insight into my problem would be greatly appreciated!
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Aaron McCarthy said:
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Click to expand...
Click to collapse
Yeah every time I the screen goes black I soft reset it in order to get the screen to turn back on. The problem is that the issue persists through soft resets. I currently can't suspend my device because I can't get the screen to turn back on...
hold down the volume down button and then press the reset button (the physical reset button) this should bring you into your bootscreen the multicoloured screen.. if you can get there then you can flash a new rom on your phone... and thats a whole other ball game. It gets a lot of hype as being hard but its really super easy to do if you just follow the directions.
Tilt 2 dark screen solved
With the tilt 2, if the screen does not wakeup, but you can answer the phone, hear music, etc..., it is a malfunctioning light sensor, maybe hardware, or software related (drivers), but it is fixable. Just eliminate all calls for use of the light sensor.
I had this problem and took quite a while to figure it out, as there are several apps that poll the light sensor that cause problems.
First, go to start/settings/system/power/backlight and uncheck the auto adjust backlight option
Second, go to start/settings/personal/buttons/backlight and uncheck the enable keyboard auto backlight sensor.
Last, open advanced config (need to download and install from touchxperience.com, if you do not have it), tab to light sensor and set light sensor polling to disabled.
Now, my phone works normal and will wake up properly from standby like it should. this all seems hardware dependant, as I have in my family 3 of these things and I dropped and broke mine, so bought a new one (4th in the series) and it had the SOD issues, but could restart with softrest. Took me the better part of the day to find a reliable fix, but now all is well again.
Hope this helps other Tilt 2 and similar issues.
Hi guys,
I've a very strange issue with my phone. l'll try to explain it precisely despite my awful english !...
I'm under revolution rom since the beginning and everything worked fine until I tried to use my phone as a modem (for a mac) during my hollidays.
when I go back to "normal" use, the phone started but the screen remained very very dark. I could see that the phone was turned on but it was like if the brightness has been set to minimum. I try to reboot into recovery, Re-flash the rom, restore a backup,etc.
One day, without any reason, the phone turned on normally and worked fine for two weeks. But, during the last night, I put my phone in plane mode and in the morning this ****ing bug was here again !
Any idea or solution ? Note that manipulations are limited because of the darkness of the screen...
hope also that my problem is understandable !!!...
Hi, your English is perfectly understandable.
Is your brightness set manually or automatically?
thank you,
the brightness is set automatically but I would be very surprised if my problem only deals with the brightness setting !....
I must add that sometimes the phone starts on normally but the screen freezes very quickly (at the code pin entering screen)...
I'm guessing you've tried switching to manual and turning it all the way up?
No I didn't...but the problem for now is that I can not access to the settings because the phone doesn't start normally !...
How does it start? Where do you get stuck?
Sometimes I can the HTC logo very dark and sometimes, as I said, the brightness is normal but the screen freezes when I have to tape my pin code.
I can also access the recovery mode, sometimes, by doing power button + vol. down button. By this way, I tried to reflash the rom, do a factory reset, but nothing works....
Whilst in the bootloader does the screen look darker there? Should be bright white, with text.
No, in the bootloader, I can see the text but it's also trough a darkened screen !...
If your screen is dark in the bootloader, which should be bright white then you have a hardware fault. Reflash a stock PD98IMG.zip or RUU and contact your network/HTC for a repair.
I found that suddenly my m5 had a blank screen, screen is working and touch is also working but there is no brightness tried everything like hard reset and reinstalled the firmware but no solution, the backlight only turn on during sony logo on bootup then screen goes dark without backlight.
A.K.Paul said:
I found that suddenly my m5 had a blank screen, screen is working and touch is also working but there is no brightness tried everything like hard reset and reinstalled the firmware but no solution, the backlight only turn on during sony logo on bootup then screen goes dark without backlight.
Click to expand...
Click to collapse
getting same here
So I've googled a bit,i could not find a actual solution.But here are some idea's:
Boot you phone i safe mode(on this link is a tutorial on how to do that: https://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/td-p/348008)
If the phone is on then go to settings-display and tick "adaptive brightness" or try untick if its alrady ticked, and then reboot your phone normally.
If that doesn't work out,try botting up without sim card,if it boot up normally go to settings-more- preferred network type and change to 2g.
I'm not saying this will work but this is what i found in 20 min googleing.Hope it works guys.Good luck
Sent from my E5603 using XDA-Developers mobile app
Black screen also ive got especialy after phone call :d only hardreset solve it here ..... perhaps it could be proximity sens faut or ? Disapoint from sony
I recall the exact same situation but with another phone. I used an app called lux to fix it. Maybe its the sensor but it's weird that just you had that problem.
another m5 black screen issue ....... it seems that many people going to say goodbye to sony forever pathetic situation...
sony support is out of words ....
Hi guys, yesterday I worked on the phone and from one moment to another it went Black, I restarted it and when it turned on the image began to flash, I managed to put it in 60hz and 144hz and it was worse, when I entre the recovery mode it is seen without no problem, will it be a problem With the rom? Or screen died, if someone knows something ir would be very helpful, thanks!!
PD: when I adjust the brightness it works well, but once locked or opening some camera-like app it goes black and doesn't turn back on.