Hello to all of you..
My P3300 does not calibrate its screen. How can i bypass the screen ''Tap the screen to set up your device and the calibration.
It seems that the touch screen does not work, but when light goes out if i touch the screen the light goes on! That seems that the screen works, correct?
How can this happen?
Need Help please..
can you use device normally?
I have the same kind of problem with my Kaiser. The screen works fine in all applications. But when I try to do a calibration it's completely dead, tap wise. No matter what I do it doesn't allow me to do the first calibration tap at the center of the screen. I then have to soft-reset to get out of the calibration screen. The device then works fine....but I still can't d a calibration.
Does anybody have an idea of why this is happening?
!
i thought this might could be a software problem and i upgrade my rom but i still have the problem.
Now i can't use my device because its the first boot and i must do calibration.
I'll try to open it...
Related
Hey guys so my Tilt 2 has been having an issue when I put it to sleep. It goes to sleep fine, but when I wake it up the screen remains black. The actual device turns on, but the screen stays black. I can still make calls, receive calls, play music, etc. but I have to soft reset the device if I want to be able to see what I am doing.
From what I can tell my problem is different from the normal Sleep of Death issue where the device simply won't wake up.
I've searched through the forums looking for solutions and have tried pretty much everything from doing a hard reset, using different roms, formatting the internal memory, etc. Even after doing all of this, my device still suffers from this issue.
Any insight into my problem would be greatly appreciated!
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Aaron McCarthy said:
I assume you've tried a simple reset using the reset button or pulling the battery out and putting it back in?
Click to expand...
Click to collapse
Yeah every time I the screen goes black I soft reset it in order to get the screen to turn back on. The problem is that the issue persists through soft resets. I currently can't suspend my device because I can't get the screen to turn back on...
hold down the volume down button and then press the reset button (the physical reset button) this should bring you into your bootscreen the multicoloured screen.. if you can get there then you can flash a new rom on your phone... and thats a whole other ball game. It gets a lot of hype as being hard but its really super easy to do if you just follow the directions.
Tilt 2 dark screen solved
With the tilt 2, if the screen does not wakeup, but you can answer the phone, hear music, etc..., it is a malfunctioning light sensor, maybe hardware, or software related (drivers), but it is fixable. Just eliminate all calls for use of the light sensor.
I had this problem and took quite a while to figure it out, as there are several apps that poll the light sensor that cause problems.
First, go to start/settings/system/power/backlight and uncheck the auto adjust backlight option
Second, go to start/settings/personal/buttons/backlight and uncheck the enable keyboard auto backlight sensor.
Last, open advanced config (need to download and install from touchxperience.com, if you do not have it), tab to light sensor and set light sensor polling to disabled.
Now, my phone works normal and will wake up properly from standby like it should. this all seems hardware dependant, as I have in my family 3 of these things and I dropped and broke mine, so bought a new one (4th in the series) and it had the SOD issues, but could restart with softrest. Took me the better part of the day to find a reliable fix, but now all is well again.
Hope this helps other Tilt 2 and similar issues.
Is this a known bug?
When I use the power management widget and toggle the screen brightness to the lowest. Then when I go to stand-by (by clicking powerbutton or automaticly) and try to activate the phone again the screen stays black (touch buttons light up but I can't use them).
I have to take out the batterie and reboot to get the screen back...
I'm so happy to see this.
I have exactly the same problem. My Wildfire S arrived this afternoon. I used it without any problems until about 22.30, then all of a sudden it wouldn't get out of standby anymore. The only way to get it working again is indeed by removing the battery for a second.
I did a factory reset (through the general phone menu) and now the problem has disappeared, but it could come back any second.
Other people experiencing the same problem?
This is a phone bought in the Netherlands where I live by the way, the black Wildfire S.
I had the same problem.
I had my wildfire s mount to usb... and using the navigon software while driving... then suddenly went to black screen with the keys activated.
I tried to enable the screen but with no luck.
When I unplugged the usb...I push the power button... and suddenly it came back to normal.
!!
very strange.
well... I found a sort solution for this.
If you do what you said.... the only way to enable it again is to plug a usb...and unplugged it.
!!!!!
The bug starting when we enable the lowest brightness!!!!!!!
I'm having the same problem. If you don't set the brightness to the lowest, it won't happen. So, this will be consideration between stability and use duration
Just the Backlight is turned off.
I have the same problem. Use an external light source and bring light to your wildfire S and you'see it is still alive. If you are able to find your brightness settings using the flashlight, increase it and you will have your old display again... It is definetly a bug.
Hi,
so any news on this bug or whether htc is doing something about it?
Just got my WF S with the most recent software and still has this bug which is very annoying. Would be great to be able to use lower backlight for nights/less battery!!
UPDATE: using continuous lightness, I found that whenever I choose light lower than 12% it stays dark and has the bug, please HTC do something about it!!!
Has this been fixed in a custom rom or does it presist in all roms?
I had it on original and custom (CM7.2) ROMS.
Think this is general bug, too bad. or someone does NOT have this bug??
I have this bug too. But u can Try to Pull the ring in the middel, Then the Screen shoudl appear again.
I do not have this bug.
Stock European ROM 2.3.5, jikantarus OC Kernel, BL unlocked and rooted
hi every one,
My phone proximity sensor are not working i checked in the settings it's Turn On But Still The Are Not workings,... And Even i Install os Many Times Through Odin Because Of This Problem But No use ..
Please Help me Is This A Hardware issue
There's a way to check if it's malfunctioning. Start your phone, and head to the dialer, and type *#0*#, and a screen should come up with all sorts of buttons on it. Tap "Sensor" in the middle, and you should have a screen with a spinny thing. If you hold your hand near the proximity sensor, the white background should turn green and your phone should vibrate. If it doesn't do that, your sensor may be malfunctioning. To exit it, double-tap the back button until it exits.
what rom have you?
kg2811 said:
what rom have you?
Click to expand...
Click to collapse
If he reflaah stock and it doesnt solve it cant be a 'rom' problem
Sent from my iPhone (sometimes my codina)
thak u for your help , i had done the thing which you had tell bought it is on white screen it doesnot turn green ... so this is a hardware issue ...
I found that suddenly my m5 had a blank screen, screen is working and touch is also working but there is no brightness tried everything like hard reset and reinstalled the firmware but no solution, the backlight only turn on during sony logo on bootup then screen goes dark without backlight.
A.K.Paul said:
I found that suddenly my m5 had a blank screen, screen is working and touch is also working but there is no brightness tried everything like hard reset and reinstalled the firmware but no solution, the backlight only turn on during sony logo on bootup then screen goes dark without backlight.
Click to expand...
Click to collapse
getting same here
So I've googled a bit,i could not find a actual solution.But here are some idea's:
Boot you phone i safe mode(on this link is a tutorial on how to do that: https://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/td-p/348008)
If the phone is on then go to settings-display and tick "adaptive brightness" or try untick if its alrady ticked, and then reboot your phone normally.
If that doesn't work out,try botting up without sim card,if it boot up normally go to settings-more- preferred network type and change to 2g.
I'm not saying this will work but this is what i found in 20 min googleing.Hope it works guys.Good luck
Sent from my E5603 using XDA-Developers mobile app
Black screen also ive got especialy after phone call :d only hardreset solve it here ..... perhaps it could be proximity sens faut or ? Disapoint from sony
I recall the exact same situation but with another phone. I used an app called lux to fix it. Maybe its the sensor but it's weird that just you had that problem.
another m5 black screen issue ....... it seems that many people going to say goodbye to sony forever pathetic situation...
sony support is out of words ....
Hi all. I have a rather weird issue. After droping(oops) my phone, I ordered a new lcd. I shelved the phone as it was unusable until the screen arrived. When the screen arrived, I saw that the battery was dead. I charged it and changed the lcd. That's for the backstory. Fast forward to now. When I open the phone, the screen lights up at full brightness as one would expect at the android one logo. It stays there at full brightness for about 8secs But as soon as it starts loading android the screen dims to absolute dark. In the beginning I thought the phone was closing, you can't see anything... Unless you close the lights.
But even in absolutely dark room, the screen is still very dim, barely discernible. The phone works absolutely fine otherwise, touch camera sound etc. I backtracked the process and put it's original screen on, but it does the same.
I tried disabling auto brightness it does nothing. In fact, changing brightness from the slider does absolutely nothing whatsoever.
Tried calibrating the sensors from the engineering menu(not sure it was called that, the one you enter when you put numbers on the call menu) they seem to be working, but the brightness doesn't change.
Tried removing the battery for a prolonged amount of time (around 6 hours iirc). Still same.
At this point i'm thinking:
1)Software problem. I will really need to hard reset the whole thing, which i'd rather not, and hope for the best.
2)Bad screen, which doesn't explain why the previous one has the same problem, or why the screen works during the logo.
I hope I was able to give enough info. Any help would be greatly appreciated. Thanks!
Hi, I'm having almost the same issue (display very dim, but for me it is always very dim) and this manifested not after any dropping or screen replacement, I guess I just wrongly inputed a button sequence that configured the mobile in this weird status. It is really annoying as it is almost impossible to unlock sims, basically the phone is unusable, very frustrating....
Hey there, did anyone found a solution for this issue?
Has anyone solved this problem?
Have you found what was causing this?
I’ve the same issue, replaced the lcd on a xiaomi mi a1 and the backlight is present at the logo startup but completely black after that.[br]
On a dark room I can barely see the screen and all it’s working, but adaptive light button is missing, seems like the bootloader is able to use the backlight but not android itself
I have the exact same problem, i really hope someone knows a solution to this. I tried pretty much anything within my capabilities