My Dash started acting up the other day and I am hoping someone here can help.
It is responding very slowly to most key presses, sometimes taking 5-10 minutes to, say, open a folder or bring up a settings screen. Sometimes they don't come up at all and it appears frozen, requiring a "yank the battery" reset procedure.
ActiveSync on both home and work PC's detects the device but cannot connect to it.
On bootup, the Windows Mobile splash will be displayed much longer than it used to (3 - 4 minutes) before I finally get a desktop.
The time on the main (top) sliding panel is often the last to (slowly) appear on the display when "waking up".
Email has stopped working in and out. I can receive calls, and Bluetooth is working, but often the ringer will continue for 5 -10 seconds after I answer, and transferring calls to my headset takes about 5 - 10 seconds after that.
Sometimes, settings changes won't "take" and will reset themselves back to their previous values.
Hard resets haven't helped, and nothing seems changed after them, which is odd.
The only thing I have changed recently is I installed the ODSHOW weather thing a few weeks ago (which seriously fubar'd my phone and it was all I could do to get the "normal" top panel back) as far as I know it's uninstalled now.
And all of this started happening after the battery had run completely down and the phone shut itself off. I have already tried another battery and the behavior hasn't changed.
I would love to flash it as I think the problem is the O/S is hosed, but is that possible without being able to connect to a PC through ActiveSync? Say, by copying the ROM package to the SD card and running it from there?
I am running RickyWatts/Kavana's WM 6.1 ROM, btw.
Many thanks if you have any suggestions.
-GoJ
Ghost of Jaco said:
My Dash started acting up the other day and I am hoping someone here can help.
It is responding very slowly to most key presses, sometimes taking 5-10 minutes to, say, open a folder or bring up a settings screen. Sometimes they don't come up at all and it appears frozen, requiring a "yank the battery" reset procedure.
ActiveSync on both home and work PC's detects the device but cannot connect to it.
On bootup, the Windows Mobile splash will be displayed much longer than it used to (3 - 4 minutes) before I finally get a desktop.
The time on the main (top) sliding panel is often the last to (slowly) appear on the display when "waking up".
Email has stopped working in and out. I can receive calls, and Bluetooth is working, but often the ringer will continue for 5 -10 seconds after I answer, and transferring calls to my headset takes about 5 - 10 seconds after that.
Sometimes, settings changes won't "take" and will reset themselves back to their previous values.
Hard resets haven't helped, and nothing seems changed after them, which is odd.
The only thing I have changed recently is I installed the ODSHOW weather thing a few weeks ago (which seriously fubar'd my phone and it was all I could do to get the "normal" top panel back) as far as I know it's uninstalled now.
And all of this started happening after the battery had run completely down and the phone shut itself off. I have already tried another battery and the behavior hasn't changed.
I would love to flash it as I think the problem is the O/S is hosed, but is that possible without being able to connect to a PC through ActiveSync? Say, by copying the ROM package to the SD card and running it from there?
I am running RickyWatts/Kavana's WM 6.1 ROM, btw.
Many thanks if you have any suggestions.
-GoJ
Click to expand...
Click to collapse
Here's what you do.Turn the phone off, holding the camera button down for about 10 seconds , plug the usb cable that should give you the bootloader screen,you can get the official tmo 6.0 on there, it has to be an official rom. Once you got the phone with the 6.0 running, set up active sync and then flash which ever 6.1 rom you want. Good luck.
Here's the link for the official 6.0 rom http://forum.xda-developers.com/showthread.php?t=381726&highlight=official+roms
Her's the 6.1 rom link. I recomend V24 w/opera http://forum.xda-developers.com/showpost.php?p=3315417&postcount=1
Thanks rolo. Let me make sure I have this:
1) Turn off the phone while holding down the camera button for about ten seconds.
2)Release the camera button and plug in the USB cable. Bootloader screen will appear.
3) From the bootloader screen I can put the TMO ROM on.
Is that correct?
Thanks again!
Ghost of Jaco said:
Thanks rolo. Let me make sure I have this:
1) Turn off the phone while holding down the camera button for about ten seconds.
2)Release the camera button and plug in the USB cable. Bootloader screen will appear.
3) From the bootloader screen I can put the TMO ROM on.
Is that correct?
Thanks again!
Click to expand...
Click to collapse
No!
1. Turn off phone
2. after phone's off, press and hold the camera button.
3. after holding it for about 10 seconds, plug the usb like you're gonna use active sync.
4.That will give you the bootloader screen, and you can now install official 6.0.
5. after you got 6.0 set. set up active sync.
6. I would wait about 10 or 15 minutes, then flash 6.1
roloracer said:
No!
1. Turn off phone
2. after phone's off, press and hold the camera button.
3. after holding it for about 10 seconds, plug the usb like you're gonna use active sync.
4.That will give you the bootloader screen, and you can now install official 6.0.
5. after you got 6.0 set. set up active sync.
6. I would wait about 10 or 15 minutes, then flash 6.1
Click to expand...
Click to collapse
Ah! Ok, now I have it in bootloader mode. Thanks.
I d/l'd the Official TMO_1.22.531.6 file and unpacked it, but the 40 MB RAR file contains only a 60 KB(?) file named RUU_signed.nbh
What do I do with that?
Ghost of Jaco said:
Ah! Ok, now I have it in bootloader mode. Thanks.
I d/l'd the Official TMO_1.22.531.6 file and unpacked it, but the 40 MB RAR file contains only a 60 KB(?) file named RUU_signed.nbh
What do I do with that?
Click to expand...
Click to collapse
the phone should recognize the 6.0 rom update. If it doesn't, unpack it again, wait until the screen ask you if you did everything to establish connection, click next and attempt the bootloader sequence again.
ah-HA!! I did it! Officially un-bricked! I downloaded the latest ROM for the T-Mobile site.
ActiveSync now works, I can receive Outlook email, and have even paired up my Aliph Jawbone via Bluetooth! Thanks so much Rolo!! You rock, dude!
I think I might wait a bit before flashing a custom ROM. I'd like to have sliding panels and such, but I'm not in a hurry.
-GoJ
Tweaked removed post as you obviously found the other .zip needed
Ghost of Jaco said:
ah-HA!! I did it! Officially un-bricked! I downloaded the latest ROM for the T-Mobile site.
ActiveSync now works, I can receive Outlook email, and have even paired up my Aliph Jawbone via Bluetooth! Thanks so much Rolo!! You rock, dude!
I think I might wait a bit before flashing a custom ROM. I'd like to have sliding panels and such, but I'm not in a hurry.
-GoJ
Click to expand...
Click to collapse
I'm glad everything worked out well
Same problem with an O2 XDA COSMO.
To put it back to live I need an original O2 XDA COSMO Rom.
Please help or I have to put my loved Cosmo to the bay.
chubbichubbi said:
Same problem with an O2 XDA COSMO.
To put it back to live I need an original O2 XDA COSMO Rom.
Please help or I have to put my loved Cosmo to the bay.
Click to expand...
Click to collapse
Yep, you need the official rom that the phone used from factory. Check for your rom on the official rom thread on the sticky. You might want to pm profezza and ask him if the O2 XDA Cosmo, Orange SPV E600 and the Rogers HTC S621 use the same rom. If they do, he has your official rom there.
Related
At this point I can;t even use the phone. it started earlier today after upgrading to Windows Mobile 6 Pro Black Edition 2.0 from windows mobile 5 and it would usually haoppen when i was talkin on the phone while recieving a text message, after which the screen would turn white and Id have to take the battery out for a quick second. Now even the battery doesn't do the trick so basically I can't even use my phone since my looking a blank white screen
any ideas whats going on?
Could you please give us some more information, setup your signature to show your rom version (and name), radio version, spl etc...
What EXACTLY have you flashed to your phone recently (or at all)?
okay I tried to get a signiture but I dont know if it worked so here it is
Cingular 8525
IPL-1.01
SPL-1.40.0lipro
HERM 100
Windows Mobile 6 Pro Black Edition 2
CE OS 5.1.195 (Build 17740.2.3.0)
ROM version: Pro Black 2.0 (1/04/07)
Protocol: 32.71.7020.12H
Now I plugged the phone into my pc usb port and it turned on again without any problems.
Few other things
I upgraded my vista drivers to the ones pointed on this site
The Hard-SPL-V6 utility never seemed to work as it would always give me error but everything else was installed without a problem and since I already have SPL-1.40.0lipro I guess theres no point in using that utility, from what i understand...
So you havent tried upgrading to ANY other rom at all?
I want to give the Windows Mobile 6 3DES.2 a try next but I don't know if I'm doing smething wrong here.
Aside from that, I havent really installed any apps
jarnism said:
I want to give the Windows Mobile 6 3DES.2 a try next but I don't know if I'm doing smething wrong here.
Aside from that, I havent really installed any apps
Click to expand...
Click to collapse
OK I doubt that it is the ROM that has caused any issues here, i would like you to CONFIRM that your bootloader version is 1.40.olipro before you continue doing naything else.
mrvanx said:
OK I doubt that it is the ROM that has caused any issues here, i would like you to CONFIRM that your bootloader version is 1.40.olipro before you continue doing naything else.
Click to expand...
Click to collapse
I just checked and that's wht it says, its been there ever since I installed windows mobile pro black edition 2
I check by pressing the power and ok button and resetting the little buttun with a stylus.
OK, have a go at flashing a different WM6 ROM, try 3DES?!
Well at least he does his reading. Welcome.
Hmm...The infamous white screen. I was a victim of that for a day, tho 1.40Oli should have fixed that...Hmm try reflashing the ROM?
Also...with 1.30Oli or later, I was able to flash with Vista without doing the driver replacement using RUUWrapper.
The way you make it sound, it seems like you have "temporary white screens"
I don't think it would hurt to reflash...and tell us your results ^_^
I'm not that educated in anything advanced yet but I am curious now.
well right now the screen goes white everytime pwer goes off and i press the power button. I can have the phone turned on all the time which draines the battery or power off the screen and reset it everytime i need to use the phone... Anything similar to that happen to anyone?
this only happens whenever the phone is unplugged from the power for some reason. As soon as its connected to the ac adapter or usb, the screen turns on and off withot a prob
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
no one seen this then I guess.
Bummer (for me!)
Try hard reset
sickboy555 said:
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
Click to expand...
Click to collapse
Try hard reset
softreset helps, sometimes i have the problem with windows mobile 5 too
jmermel said:
Try hard reset
Click to expand...
Click to collapse
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Hard reset
sickboy555 said:
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Click to expand...
Click to collapse
You might have loaded a program that is not liked. Use a backup program. If this does not work then load your backup after the hard reset and you will be back to where you started
P3600 with D810 WM6 ROM; also happens occasionally, recovered with soft reset. Seems to happen most often when I press the On/Off button twice too quickly.
thanks guys.
I'm going to try the hard reset route-I'll report back.
Some time ago this happened to me so often, but said it was due to some application, in my case was Slide2Unlock.
Since I removed by their consumption of memory it didn't happened to me.
(Sorry for my english)
Bugger, this has started to happen to me as well. Only 3 times in the last 3 days but if it keeps is up that will be enough for me to do a hard reset (overdue). Strange cause the only new thing I put on in the last week has been PCM 16 which is only a copy/paste exercise.
The fix in the Hermes forum is to force your device to sleep and not let it go into standby.
I have had some problems recently with DeviceLock 1.2 just ceasing to work and have to uninstall/reinstall to make it work again. I set it to turn the screen off when locked, as this does not put the device on standby, maybe there is the same issue with it going into standby by itself.
I have the same problem..i think that it has to do with the phone hanging..most probably due to some background programs eating too much power and memory and the phone just lacks till it hangs..happens when you have other programs that have hanged as well..my problem is with PocketAlarm..it takes so long to load my phone went to standby and the phone couldnt be called back..in brief the phone just hangs because of a program..i don think it has any problem do to with the hardware or strictly the OS..cant really explain..but the role the OS play in this problem is that it allows the program to make full use of the phone till the phone cant cope with it..its the core of the OS so it cant be avoided with any other versions or anything..sorry it seems rather unclear..hope you guys understand..
same problem for me ... from times to times, when a call hang up, i push a lot of times the red button for going back to the today screen and as it shows up, i click immediately on the Power button for turning off the screen. right after when i forgot to do something (approx 1sec) i push the power button and there it doesn't turn on the screen ... strange ...
what i've installed on it :
TomTom 6
BatteryStatus with today plugin ver 1.04.203 beta4 i put tray icons too.
i've bluezard for sniffing and/or hacking bluetooth devices.
OBDgauge too it's a software that works with a bluetooth dongle i plug into the diag port of my car.
and that's all. ah yes one more thing -> i disable the "HTC Home" because i don't like it.
Same problem here...
Still no solution?
I got this problem from some version of rom by Karmba. But V7.2 is OK so far. It seems happened when I close Egress reader by click X button then turn off screen by power switch. It then would not wakeup again. But if I close Egress and check the running programs from Task Manager to make sure the Egress is not running at the background, then I can turn on or off the screen freely.
So I think this wakeup problem is caused by some running program that was not closed properly by X button then crash the WM.
That was just my personal finding. Hope it help you guys a bit.
Hello,
I have a strange problem with my HTC Artemis (O2 XDA branded, bought in Germany, no lock)
It behaves unstable and indeterministic.
Unstable means that it crashes/stucks or turns off.
Indeterministic means that it happens when i plugg it to charger, when i'm syncing, when a phone rings, when using applications/tomtom or just i arrive to work and i find the device off.
When it crashes or i find it off, the biggest problem is to boot the device. It takes me typically 10mins, when i'm always trying to press the power button, push the reset button or unplugg the battery for a while in random order until i bring it to work.
After first crach, the device also often crashes or stucks again during the boot process.
Once, the device was so dead, that it took me two days to bring it into bootloader mode and then i could at least flash the ROM.
All these was happening with ARTEMIS TOUCH 4.01 WWE - LITE NO CUBE.
Yesterday, i switched to ARTEMIS TOUCH 4.02 WWE - LITE NO CUBE (burned FW twice) without installing any other applications and the problems are still here
My personal feeling is that it is getting every week worser.
When i bought the device (eBay), there was original FW with Win Mobile 5 on it, i immediately flashed to ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device. So i flashed to 4.01 and this issue was away, but approx 2months ago, the above described behaviour has started and nowdays i'm fighting with it 2-3x a day.
so, can anybody help?
GiZMo
Similar here
I have a similar problem, what's really strange to me is, that as far as i can recall it started happening 2 months ago or so also!! weird huh...
my device simply reboots from time to time! even while i'm making a call.
the weird thing about these reboots is that when it comes back to live i do not have to enter my pin to enable the phone! everytime i perform a manual reboot (by software, using the pin or remove battery) i have to insert my pin to able to make a call...
i have upgraded from 3.01 full touch to 4.02 full touch about the time it started, i have now 4.02 vanilla touch but problem still occurs from time to time.
any ideas?
Im another one to join this boat!
Bought an MDA C 3, two days ago, bought of someone from gumtree.com.
Worked fine for the first hour, and then locked up - nothing on the screen, no LED. Only way to get it going was to remove battery and then press power button.
I upgraded the ROM from the original t-mob UK WM5 to mechles fine release: http://forum.xda-developers.com/showthread.php?t=371182
The lock-ups / crashes have now become rarer, on average every 4 hours (before was every 1 hour).
There is no pattern to them either, although I have saw the screen trun all corrupted just before it happens. The last one was caused when I pressed the 'start' button.
I'm on a T-Mob contract, and lost my Kaiser, got ripped of when I tryed to replace it by a tosser on here for $375 Thief on the loose thread, and was hoping my luck had changed when I bought this one!!
It is T-mob branded and I wonder if there isn't a fix on here, would T-Mob repair it under warranty??
same "issue" with no entering of PIN after reboot. But not always
GiZMoSK said:
ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device.
Click to expand...
Click to collapse
here i found a good description of that issue:
"
Originally Posted by lasertony
I've got the same problem as !Novy, but nobody seems to have noticed his question. Are there any other guys out there with this strange problem ? I have been using this rom for a while and sometimes, without any visual warning the phone freezes up. This is particularly ennoying because there is no way to check wether it is working or not. Every other function or software keeps working ! The phone is just not receiving any calls or sms. So you can miss an entire day of calls and sms without knowing... Only when trying to call somebody the dialer says 'Dialing...' and nothing happens. No connection.
A soft reset is needed to get the phone working again.
"
btw, now i'm again trying to turn the device on, it's again stuck. grrr
Hello,
i had a few weeks ago a similar strange behaviour.
After changing the sd-card I had problems to turn the device on. After a hard reset it began to boot but hang.
The I flashed back to original O2 ROM. Then I had a unpredictable behaviour. Somtimes no sound. Sometimes I cound not be called. Sometimes Error message "no sim card". After every reset i had an other error.
Hard reset and flashing was no solution. Removing battery for less than 4 hours has no effect.
Then I wanted to send it back for repair. I took of the battery. The next day I wanted to try a last time and surprise: The device works fine without an error. Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
regards
Andre
It is Happening to my device too!!
It stucks every 2-3 hours!Tried many of the cooked ROMs but nothing.Also tried all the radio roms for 1-2 days.still the same!
It stucks with no particular reason.SOmetimes in s2u2 sometimes when am receiving a call.... etc.
Had the pin problem too for 3-4 times!
I will try your sugestion ANDRE and we will see!
Also i will try flashing the original rom,cid unlock and then flash the cood rom twice!
Fingers crosed....
Andre1210 said:
Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
Click to expand...
Click to collapse
didn't help
happy u
now, i will try to flash back original german o2 rom
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
bricked or not?
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Vinnie1 said:
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
Click to expand...
Click to collapse
I thought it was a battery problem too, but I've 2 batteries and both are died in the same time? I think it's too strange...
My P3300 have this problem from when it is returned from assistence and with original firmware (without other applications).
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
GiZMoSK said:
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Click to expand...
Click to collapse
jahrami said:
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Click to expand...
Click to collapse
but i cannot get into bootloader mode so no flashing from SD card or PC
bricked device
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
GiZMoSK said:
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
Click to expand...
Click to collapse
the good sign are the leds that means you have a very good chance...the guy made the piont...check the wiki
random crashes are often caused by hardware malfunction...sometimes the connection on the motherboard stuck,get broken or make a short-circuit...so check the hardware
Hey guys,
Long time member, but first time poster . I got some good news for you iMate users out there. I was able to get the new WM 6.1 ROMs for both the iMate Ultimate 8502 and 9502, though I was told these were still considered beta ROMs. They are for the Australian market I assume as the Telstra logo displays on the boot up.
I've been using it on my 9502 for the past day or two and it seems to have fixed the following issues:
SDHC is supported now
MS Voice Command is working
GPS does not have to be turned on manually anymore
Camera program memory leak seems to be fixed. I will have to do more testing.
Ongoing issues:
Free Program Memory is still 33 MB after a hard reset
The ROM also seems to fix alot of software compatibility issue I was having. Like some of my SPB software that I normally use is now working without any freezes or heavy slowdown. It also seems to run a bit faster, especially when you slide out the keyboard. Anyways, give it a try. Hope this helps.
iMate 8502 : http://www.megaupload.com/?d=NU4R6EWA
iMate 9502 : http://rapidshare.com/files/129807567/Ultimate_9502_V.01.73_NO_CP.rar.html
Great! Thank you!
Nice.
I went to run the update but it requires a "ROM unlock code"
Anyone know what that is?
Thanks
Dave
Re: ROM unlock code
You may find the code printed on the box you have bought the device in or on www.imate.com after you have registered your imate.
milan
Has anyone run this beta as yet ? Keen to see what the opinions are. If WM6.1 doesn't make the device any more stable then ebay here we come which is a real pity I must say.
Just installed and it works better but yet to install my other software. GPS is missing from the wireless manager but I assume that is because GPS is now always active.
Now there is about 50mb free after hard reset. Might be some more once I get rid of the other start up shortcuts.
BTW I have an 8502 and thanks to the OP. Looks like we may be into a winner here, finally............
milanvot said:
You may find the code printed on the box you have bought the device in or on www.imate.com after you have registered your imate.
milan
Click to expand...
Click to collapse
There it is!!! Thanks! Sheesh iMate is tough :-\
-D
Got it up to 6.1 and it is true the GPS is good to go without a turn-on.
However, with this rom I am NOT able to launch iGo 06 or iGo8. Anyone else have this issue and/or a solution? Note: It was working on the old rom.
Thanks
-D
Please help me....
I have i-mate 8502
I did the upgrade BUT before it I lounched Sprite Backup to save all phone data and settings.
After ugrading to WM 6.1 I lounched Sprite Backup again and... now I have only i-mate blue screen (i-mate sign on it) and phone doesn't go any further....
I would flash it again but my pc doesn't see it now at all.
Maybe you know some way to bring my i-mate back to life?
Please help.... Did i brake it?
Not sure why Sprite would cause that for you. I installed Sprite backup NP. I even, backed up, hard reset and restored with Sprite and not even an error.
Still can't get iGo to work though. I doubt anyone here has an 8502 WM6.0 ROM ??? At this point I would rather go back if I can't use iGo :-(
-D
Taking battery out for 3 hours didn't work...
What else can I do?
Help please...
BIG Problem
Hi,
I've run the upgrade program and it worked fine until the first reset... Now I see the message "Please reconnect to PC and run the upgrade again"... I did this 10 times and nothing... I keep getting the "Connect fail" message from the setup file... The problem is that Active Sync dosen't see anymore the phone connected and I don't think it can anymore... that message seem to be from the bootstrap program or something like that...
Please help...
George B
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
Can someone post another link? The original is not working at the moment. Thanks in advance
martin_yo you're my hero.... if you live in poland, i would send you biiiiiig vodka thanx a lot!!! IT'S ALIVE !!!!!!!
imate 8502
OK, I got an XP machine and did the upgrade, went smoothly in about 15 minutes.
Overall I would say it is a worthwhile improvement.
Changes/improvements:-
* PIE scrolling fixed - much smoother, now with zoom
* PIE doesn't freeze any more
* Auto GPS enabling is nice
* Camera seems to start faster
* Threaded SMS is really good (and MMS is integrated now into one account)
* Seems to now stop notifying "SMS Sent"
* Overall perf seems better
* Wireless manager is simpler (I hated the old "solar system" UI)
* Phone settings includes Network Time setting and "battery saver" HSPA setting
* Can change default phone number (w, h, m) from the phone contacts app
Things not fixed:
* Voice call volume appears to be the same
* Select and hold with center button on email attachments still tries to open them (instead of offering to save like every other PPC I have used)
Not tested:
* SDHC support - I don't have a card
Best of all is that it appears to not have introduced any new bugs (fingers crossed).
I am sure I have spoken too soon ...
One thing I did notice was SPB Backup 2.0 stops the phone from rebooting successfully (just stays on Windows Mobile screen forever) if you have scheduled backups on. Seems as if it doesn't like something in the notification queue - so just backup manually. Not sure if scheduled backups on SPB Backup 2.0 worked properly in 6.0?
CrozB said:
Still can't get iGo to work though. I doubt anyone here has an 8502 WM6.0 ROM ??? At this point I would rather go back if I can't use iGo :-(
-D
Click to expand...
Click to collapse
did u try GPSgate? some GPS programs need it!
rafaldabrowski said:
martin_yo you're my hero.... if you live in poland, i would send you biiiiiig vodka thanx a lot!!! IT'S ALIVE !!!!!!!
Click to expand...
Click to collapse
I'm glad to hear that....unfortunately i live in the galaxy far faraway...
martin_yo said:
After Flashed with the new ROM, My Device is now stuck in iMate Blue Screen Logo....!!!
But Don't worry Guys...it can be solved with manually hard Reset...
1. Remove battery and reinsert (to make sure the phone is off).
2. Hold down Fn and the Green button (with the phone icon on it) and press the power button.
3. You will see the white hard reset option screen almost immediately. Press the Left Soft Key to hard reset.
Work for me...
Click to expand...
Click to collapse
I have the same issue with the "Please reconnect to PC and run the upgrade again" message. Unfortunately, the reset doesn't help. As soon as you press the power button that message comes up. I think if we got that message, we've bricked it
mrloopy said:
I have the same issue with the "Please reconnect to PC and run the upgrade again" message. Unfortunately, the reset doesn't help. As soon as you press the power button that message comes up. I think if we got that message, we've bricked it
Click to expand...
Click to collapse
You may be right but in the spirit of trying everything you:-
1) PRESS AND HOLD "Fn and Green" buttons
2) WHILE KEEPING THEM PRESSED press and release the reset hole with stylus
3) CONTINUE HOLDING the Fn and Green buttons until the white reset options screen appears
Fingers crossed for you - if this doesn't work then you are right, time to send it back.
Hi guys/gals.
Got a bit of a problem, and not sure whether it's the actual phone at fault, or the software...
Had the phone for about 4 months now, and have noticed this to get worse and worse... I'm pretty sure it's happened before on the stock rom, but can't remember whether it happened before I unlocked the phone to be able to install custom roms (not security/sim unlock, just a standard unlock to allow custom roms).
Anyway, this is basically how my phone's life has been: I got phone, used standard htc rom. Then, the spl unlocker came out, and I installed that about 2 weeks after it came out (waited just to check people had no probs ). Then, I installed one of the energy roms as my first rom. Installed a few other roms in between, then an updated energy rom etc. Then, I installed the official wwe 6.5 rom. Then, I went back to the energy rom. Currently, I'm using the 26th October (iirc) rom. As I said, not sure whether it happened when I had the official 6.1 rom on (spl locked), but I'm quite sure it happened while I had the official 6.5 rom on (spl unlocked). It has happened tho with all different custom rom images I've used...
Basically, what I've noticed, is that sometimes I'm replying to a text message or email, click reply, pull out keyboard, and it seems to cause the phone to power off. Pressing the power button starts it again. Sometimes, I've not been doing anything, and it's turned itself off. Sometimes, I've dropped the phone (even only a slight drop of about 1cm), and it's caused it to power off.
I've also had times where it's turned itself off, and nothing's allowed it to come back on, other than taking the battery out the back of the phone and re-adding the battery. Then, pressing the power button powers the phone on.
Is this a problem with the roms, a problem with the spl unlocker, or a problem with my phone itself? Am I best contacting htc?
Any advice welcome, as it's very annoying coming to use the phone, and finding it's turned itself off, or when I go to reply, I open the keyboard, and then have to wait for it to load up and power it on to reply!!!
Many thanks in advance
Hi.
It's very anoying for you..
I suppose you should try to (re)install the latest Hard SPL, and to install the latest Radio too. After it, make a hard reset. Next, flash with your favorite ROM And come back here to say us what happens.
See you, and good luck for these manips.
lovelldr said:
Hi guys/gals.
Basically, what I've noticed, is that sometimes I'm replying to a text message or email, click reply, pull out keyboard, and it seems to cause the phone to power off. Pressing the power button starts it again. Sometimes, I've not been doing anything, and it's turned itself off. Sometimes, I've dropped the phone (even only a slight drop of about 1cm), and it's caused it to power off.
Click to expand...
Click to collapse
I've had this same trouble. It would happen to me when I would finish typing a text message and hit the send key and slide the keyboard close at the same time. I only really noticed it when I was running the energyroms, however I can not say for sure that they are the root cause of it, as I have waited till the message was sent before closing my keyboard ever since.
Well, since I wrote this message this morning, it's happened at least twice. Both times whilst the phone has been in my pocket...
I will try installing the latest hard spl. Think the radio I have is the latest already. Will also try a different ROM just in case it is energy roms which is causing it (but am pretty sure it happened with other roms).
Thanks for those suggestions, will let you know any outcomes
try Valkyrie. ^^
Well, I went through and installed the new hardspl (altho not sure if any different to the one I had, how would I tell?!). I then installed the image from josh, which had the latest radio and rphone.dll (or whatever the file is called) matched to it. However, doesn't appear to have made any difference. Still doing it...
Does anyone else suffer much with it, and it's just a design fault? Or should I contact htc? As surely it should just turn off when in your pocket?!
No-one else? I'm just the only person. Guess I best drop htc an email then...
my att Rhodium /tilt2 does it too
Ive been dealing with this for awhile now also.... , also return my phone for new one but this one does the same thing my radio is 4.47.25.24 and i have 1.6beta rom by josh build 21882.5.073 .