Related
Howd'y just got a new Jasjam Spl is 2.03 how do I go about flashing my rom as the RUU doesn't have my SPl in it ??? Basically I want to updat to CRC's latest
Do some more homework first dude, you dont wanna end up with a paperweight......ALWAYS make sure you have flashed HardSPL before you do ANYTHING.
Take a peek here about what to do: Flashing HardSPL. Then flash away with any ROM you please.
Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one
bongo333 said:
Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one
Click to expand...
Click to collapse
seriously....you DO NOT need/want to be using SPL 2.03....you are increasing the risk of bricking your device...flash hardspl 2.10 to your device then just flash CRCs rom using the utility included with it.
Follow the guide i posted earlier to make your device safe to flash then look in CRCs thread for the files you need to run the ROM.
Bongo333, listen to MrVanx.... You asked the question and he's giving you his expert opinion... Listen to his experience cos god knows his guides have helped me out a lot of times...We don't wanna be answering questions tomorrow about how to unbrick your hermes. Its easier if you listen to experience and have a good time upgading your hermes as we won't knowingly steer you wrong..
Cheers
Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks
paulslee said:
Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
again there is a guide how to downgrade at mrvanx above
test7875 said:
again there is a guide how to downgrade at mrvanx above
Click to expand...
Click to collapse
I've gone through that, but that only gets you to SPL 1.06, which (I'm not sure really) is an older version which wouldn't be recognised by Telstra as genuine?
Thats fine thats a retail one.
You can go to 1.04
its here as stated on this mrvanx page
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
Have yout got these page contents anywhere? These links what you write are inactive!
Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke
y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky
OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!
This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950
harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)
he is asking for unsigned one also (i nv see wrong @ his post)
read again.. he already has 1.40 olinex (which is unsigned)
Hello everybody!
I tried to search the Wiki and this forum but unfortunately I was unsuccessfull in searching the link for downloading the original russian ROM. I have problems with my Diamond and want to get in official repair (warranty) therefore I think I need the original ROM not even an upgraded one from official site. Maybe this is mistake and I can give them my Diamond flashed with any cooked ROM?
Please help.
I apreciate your attention to my post.
Oh! Common
You searched ... lol
It's a sticky thread here...
http://forum.xda-developers.com/showthread.php?t=413910
read before you post , my friend
THANKS!
but this thread isn't sticky
sorry, but could you please help me to point to the original SPL?
I've found this thread http://forum.xda-developers.com/showthread.php?t=401590&highlight=original+SPL but can't find the link.
update
I've found this thread http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 but can't figure what SPL I need to download for 1.37 ROM?
PLease help!
p.s.
viruchay svoih
??
But you do have step-by-step howto there (last link)
The SPL - comes last.
The answer is IN your question
Surprisingly for 1.37 ROM you need ... 1.37 SPL.
BTW. I do not think that they will realize the SPL if you'll have original ROM. But just to be sure - flash the SPL - it's 1 min...
hi there, i hv a problem here,i hv flash my dopod838 pro to manila 2d which i found in this forum,after flash it,my device also hang and when i do a soft reset,it hang at boot screen and cant enter windows..i wondering what problem with my device.....can some body gv me idea regarding my dopod?relly blur and no idea about it...........
Hi! Have you tried flashing original carrier ROM & then flashing the ROM of your choice??
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.
kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
HI!
Please check this link out I am sure it you will get enough info about upgrading your Dopod 838 pro!
Best of Luck!
ultramag69 said:
I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.
Click to expand...
Click to collapse
yes i have hardspl installed,my spl ver is 2.10.olipro,but still like that
kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
Hi!
You can get original carrier shipped WM6 rom for your mobile here!
thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks
kahwah said:
thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks
Click to expand...
Click to collapse
Hi!
The radio ROM provides improvements on the GSM radio stack and this has effect on the GSM signal, AT command interface, GSM data modem (3G, GPRS, EDGE, HSDPA, etc...) functionality that is controlled by the Radio Interface Layer (RIL)
Please go trough this page you have plenty of information related to all Hermes related queries one may have.. Hope it will be useful for you
Just remember though that if something stuffs up while flashing the radio rom, you are pretty much gonna end up with a brick... You may be able to use the PDA functions but phone will be gone forever...
same problem
I have a dopod 838 pro. Hardspl by olipro. Flashed roms with manilla 2d and right now suffering the same problem like kahwah..
Tried already the method of flashing original rom then to the cooked rom but still the same problem persist.
Can someone give me an idea on what to do next..
Seriously guys, both of you, READ the Hermes Wiki and the Noob section, they are set as stickies at the top of the thread. I mean, come on, you have not even posted 7 posts on XDA-DEVs and you already are close to bricking your phone.
READ the Wiki first!
How can I find official AT&T WM6 ROM?
If I flash ROM following method below is that mean I get the Official ROM right
1.HardSPL
2.official AT&T WM6 striped
Pls help me out or where is official at&t rom....
Thanks,
Well dude...
The hardSPL is one use tho... casue the SPL unlock is forever but... the stripped can be done always
and in fact is an extremely recomended step to follow... if you are sure that you already got your SPL patched... so... just perform the wm6 stripped ATT original rom before try any other rom... maybe you could have important issues if dont flash the original...
At the beginin of every thread for a rom all the chefs post a link to the stripped so its easy to find it...
Keep it up!
If you only want to use the ATTs ROM or latter flash another cooked ROMs is ok but if it is for warranty pourposes you should read the stickies of mrvanx and veyka at the beginning of this thread. There youll find the links to official ROMs and hoppefully the answer to your particular problem.
HTC Tytn
ROM: Shamanix WM6 Ultimate v2 Final
RADIO: 1.48.00.10
History: VPA Compact (HTC Magician), Jornada 720
You can find hardspl here: http://forum.xda-developers.com/showthread.php?t=296722
Download hardspl
You can find the stripped rom, and the official unstripped in my signature.
Please use Hermes WIKI and searching before opening new threads.
Peace,
Joshua