Problem with SEND Button (Green) - P3300, MDA Compact III General

Hi
I am having O2 Orbit.
The Green Send key is getting pressed automatically as soon as I switch ON the device and it auto dials the last dialed number continuesly.
I opened the case all through and tried to find any obsticles physically, but its fine.
Can any one suggest any tips.
How do I disable the SEND Button, (I can use the touch screen to access the phone).
Thanks in Advance
Regards
Laxmikanth

Hi, i'm from Brazil and i have the same problem with my P3301.
Did you found a solution?
Thanks,
Roberto.

Related

How to send an SMS without using stylus?

Hi,
I have just received my Qtek 9090 and I am very happy with it so far.
One thing I could not figure out yet is how to send an SMS with the keyboard without using the stylus? When I'm editing the SMS, I should be able to just press one key to send it and I can't find it.
Thanks for your help.
keyboard send message solution
Hi,
you can press "Lock/FN" key (lower left key) and then "Menu" (lower right key) and a menu appears. The you can use the navigational "joystik" to select "SEND" and the middle button on the joystick to select the option....
and there she goes......
okay, yes. On my system t seems that I can simply press "Menu" and then "Return". That's fine by me. Thanks.
Now another one Do you know a way to very quickly get in the SMS "Compose" window - without touching the screen?
Thanks,
François
Use the second softbutton above the call button to get into the messaging application. Press the navigation button to the side until you see Text Messages above the New menu. Hit the menu button on the keyboard. Use the navigation button and press "new"
Oystein
Is there a program that lets you send ringtones and file attachments via sms like on the Nokia communicator series?
never heard about anybody being able to attach anything to sms's
are you sure that the nokia dont just sendt it as pop3 over grps ?
the communicators don't have gprs. I used to have 100's of ringtones on my 9210 and sms them to friends' nokia phones.
@t0flus : Great, thanks. I was mssing the side nav button thing !!!
So far, I'm very hapy with this device even if coming from HP 4150 I find it a bit heavy but I don't carry a phone anymore so, all in one, it is okay.
I guess the ultimate thing would be an SDA with Wifi
Other question : anyone of you leaving bluetooth always on ? Whith what impact on power consumption? I could not try yet because I did have the opportunity to try while staying close from power source during the day to cope with possible low on the batteries side...
Thanks.
Also, this we, I'll purchase a TomTom Nav 3 BT unit. I'll report here how the things go with the BT headset and GPS together.

Blank Button on Phone Dialer

I am wondering if blank button on the phone dialer of my Magician can be remapped to something like the loudspeaker (instead of 'Hold' which appears after a call connects) so that when i make a call I can switch directly to loudspeaker at the touch of a button?
Thanks
Rob
Rob,
I think it's generally thought that enabling the loudspeaker is a hardware limitation, not software. I'm not sure if it is, my VJPhoneShortcuts will do it on WM5, and I just got bored and never tried to find out how to do it on the Magician. However, for remapping the blank button, Mamaich has made a contacts dialler or something similar that can be mapped onto that button. It's an amazing program. If you can't find it on the board, shout out.
V
tnx 4 the feedback, yeah it's a good idea to use the button for speed dialling (if the speakerphone is not an option) and i found the link for that MaMaich thingy but it's dead http://mamaich.kasone.com/imate/cproghook.rar Couldn't find it anywhere else. if u have any hints plz tell

Vibrate mode hangs my BA

Hi, I've just gotten a BA from a friend which seems to have a little fault. When i turn on vibrate mode via the Today Screen or switch the ring type to "Vibrate and Ring", the phone's screen turns white and the whole phone kind of soft reset itself when
1. There is an incoming call or
2. I pressed the play button to hear the ring tone in the settings menu.
It is initally running on wm2003 and after upgrading to helmi's latest wm5 rom, the problem still exists. Is this a hardware or software problem? Any help will be appreciated

text entry options don't work with Touch HD (on Orange UK)

Hi all,
I apologise if this is not the right place to pose this question, but I just got a Touch HD on an Orange contract a couple of days ago, and I can't seem to be able to change the text entry method on my handset. It always stays as 'Phone Keypad', no matter which method I select, from the several methods listed: Block Recognizer, Compact QWERTY, Full QWERTY, Keyboard, etc. It's the same whether I try to make the selection by pressing the "OPTIONS" button on the phone keypad, or whether I go through Start->Settings->Input
All the software/hardware configuration on my handset is exactly as it was when I received it from Orange, so far I haven't even installed a single new program.
Any help? TIA
Hi.
Can't offer any advice as such, but can tell you that I got my HD from Orange just over a week ago, and I can change the keyboard without any problems.
I originally had a Touch Diamond, so I knew how I wanted it set up. I just brought up the menu from the keyboard at the bottom of the screen when it first popped up and did it from there.
Sorry I can't be any help, other than to tell you that you should be able to do it!
Good luck mate.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed Gyrator and everything started to work.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed HD Tweak and Gyrator and everything started to work. I have no idea how it worked though.
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen.
Since then, mine's stayed as I selected it - on Full QWERTY.
Hope this helps!
langauld said:
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen."
Same happened with mine. If you click on the options then you cant change it, however if you click on the box in the middle of the screen at the bottom, you can change them.. Bizarre!
Click to expand...
Click to collapse
Thanks for the replies and suggestions, guys. I've got it working for me too: by pressing the 4x4 grid-like icon at the bottom centre of the screen to bring up the keyboard, and then pressing the small upward-pointing arrowhead that brings up keyboard options. I guess that's what ultrazonixe probably means... although I couldn't get it work by sliding my finger upwards off the centre button as langauld suggested (except if incidently I did it from the arrowhead icon).
Thanks for the help!
Yes this is quite tricky till you get the idea.
Press the bottom middle button (icon of keypad) to get the keypad up, if its not already up.
Then the bottom icon changes and adds a small up arrow just to the right of the keypad icon. (nothing to do with the four arrows just below the keypad)
you have to press this small up arrow just to the right of the keypad icon and a menu pops labled "touch input settings".
its not the same one that comes up when you press the options tab which does not work.
Press the right choice eg full qwerty or whatever, and hey presto the keypad changes instantly.
same here
Yes I could change it .. via selecting the arrow next to the mini keyboard on the bottom ... but it used to reset it self every time I starsted the phone...
Now I have TouchPal.. I have never looked back.

screen problem

hi all,
just got my rhodium yesterday but unfortunately i have a problem with it
Without pressing the screen it validates action, like press enter many times in sms.
Does someone get this problem ?

Categories

Resources