Hi everybody,
i have a serious problem whith my diamond. In the past i have flashed some cooked roms in my diamond. But yesterday in order to have my warranty back i flashed an official rom 1.93 and i lock it with the original spl 1.93
.
So far good. But today i tried to flash an official rom 2.03 and it showed me this : Error [294] : Invalid Vender Id
I looked for answers at xda but they say that i have to use Hard Spl.
I dont want to use Hard spl because i will lose my warranty again so i cant use it.
What do i have to do to flash official rom 2.03????
Thanx in advance
Related
Hi guys,
My original ROM Version : 1.37.207.2 GER , O2 XDA Diamond and today i just spl the device with the signed and unsigned version of the Hard SPL 1.40 Olinex and i tried to use different 3 WWE ROMS to change it to english one but everytime after 1% i get an error everytime ERROR [244] : INVALID MODEL ID. But the i checked with the Manual Bootloader, hard spl is done successfully with triband colors and the correct version of 1.40 Olinex. But it still doesn't work. The device is DIAM300.
Please i need your help, give me some suggestions.
taxalian said:
Hi guys,
My original ROM Version : 1.37.207.2 GER , O2 XDA Diamond and today i just spl the device with the signed and unsigned version of the Hard SPL 1.40 Olinex and i tried to use different 3 WWE ROMS to change it to english one but everytime after 1% i get an error everytime ERROR [244] : INVALID MODEL ID. But the i checked with the Manual Bootloader, hard spl is done successfully with triband colors and the correct version of 1.40 Olinex. But it still doesn't work. The device is DIAM300.
Please i need your help, give me some suggestions.
Click to expand...
Click to collapse
Hi, i've the same problem, is there a solution to install a differet language rom on a DIAM300?
Could be the model ID http://forum.xda-developers.com/showthread.php?t=409425
this solution is valid for the diam300 too?
what does it mean "Make note of the Target CID, Version, Language and Chunk Size. FYI the Model ID is the problematic setting here. If it says DIAM10000 and you have a DIAM300 you're screwed."?
thanks
I'm trying to switch from 1.37.207.2 to 1.93.707.1... but it gives error after 1 %. Do I also need to flash SPL as in the case for cooked ROMs?
No answer for me?
Have u flash hardspl in to your device? propebly you must do that if you want the 1.93 rom
Actually I have done nothing on my phone up to now... It was stock SPL which was 1.37... you think I need an unsigned SPL? but 1.93 is also original ROM from HTC... I am confused...
ofcoure you can flash this but since it stuck on 1% it can be that the CID in your phone and the 1.93 rom dont match. So u must hardSPL
In general you only can flash the rom you download from HTC e-club without hardspl.
Thanks bro...
HELP on 1.93 ROM
HI i am new to HTC and i have ROM version 1.37. I installed the hardspl unsigned olinex 1.37. now pls can anyone give me the ROM 1.93 to download and how shall i do it? i downloaded several ROms but i cant seem to know how to start it :/
dear sir
i bought HTC diamond from Germany O2
i crack sim problem and work well
now , i would like flash to taiwan version or UK vodafone version
but it can not flash any version i checked
the display "invalid model ID" problem
anyone who know how to solve
i use HardSPL-1.23/HardSPL-1.24 already
i am so stupid to flash any version
If you want to flash carrier ROMs please first remove IPL/SPL from that ROM.
Your Hard-SPL won't allow reflashing any other SPL.
This is for Security, a badly flashed IPL or SPL will brick your device.
Besides that, the average user won't have any advantage from another SPL other than Hard SPL.
You'd be better of with a custom cooked ROM from one of our Cooks (they are all IPL/SPL free)
Most custom ROMs stand out in stability, and added extra's.
Good luck and have Fun,
EqX
Has someone this rom? (Official Italian H3G Touch Diamond Rom (v. Official 1.93).
Regards
EDIT
I need this version: 1.93.772.1
here it is!
Code:
http://rapidshare.com/files/160535375/1.93.772.1_3_ITA.rar
(only nbh file, and have to install hardspl before flash it!)
bye!
I've already installed and flashed a cooked rom but I'd like to recover my phone to the original rom in case of necessity.
So, where I can find the original bootloader (the original "hardspl")?
EDIT
Is the one in this page good?
http://forum.xda-developers.com/showthread.php?t=400411
I also need the spl stock number for this rom version...... is 1.37 or 1.93 the correct one????please....next week I have to send my diamond to costumer service....
Can anyone help us? Can anyone controll on his own diamond? What is the original spl version for a H3G ITA branded diamond with the latest rom version? I suppose 1.93 but I'm not sure...
For rom 1.93.772.1 the spl is 1.93
gianx80 said:
Can anyone help us? Can anyone controll on his own diamond? What is the original spl version for a H3G ITA branded diamond with the latest rom version? I suppose 1.93 but I'm not sure...
Click to expand...
Click to collapse
Thank you!
Best Ragards
i had some issue with this rom, installing it i had no ring for incoming call and shell32.exe crashed making impossible saving changes for sound settings, so i couldn't use it. i tried it with olinex spl and original spl thinking for a compatibility problems, but it wasn't, so i come back to te older 1.93.408.3... i downloaded exactly this file... did you have some problem with?
otherwise i could see it is faster then older one, it has 10% more free memory (just flashed and booted it has about 49/50% memory usage.. the 1.93.408.3 has 56-60% memory usage and it make free less memory using and closing applications) and, it has 77mb free against about 55mb...
I've not yet flashed my device with this rom (I'll flash it only for warranty reasons), but I'm curious: ervius, did you have problems with your H3G branded rom?
could somebody post a working link for download?
i need this rom for warranty reason
if you need for warranty reason you can also flash the old official italian rom and use original spl, my diamond arrived with the official rom and not with h3g rom...
Here it is ... http://www.megaupload.com/it/?d=YQNCWXRQ.
Ervius, did you remove the file from rapidshare?
Ok all expert here i want to ask a question. I want to send my diamond for a repair that still in warranty. before this i've load olinex unsigned 1.93 spl. but when i reflash to original official 2.03 rom the spl is still the same and not the 2.03 version one. I've done using the nbhutil to extract the spl module from official rom and make it an nbh format. but when i flash the spl only it still the 1.93 version. how is this happened?
**do u really think that they will check for the spl version before repair instead of official rom loaded? i'm afraid just because of the spl version is not the official one will void the warranty.
please help me. sorry for poor english.
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
mrm2007 said:
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
I already flashed to the stock 2.03 rom but when i check the bootloader version its still spl-1.40 olipro. before this its spl-2.03. so how?
Your SPL is Hard-SPL, meaning: write protected. You can only overwrite it using Soft-SPL (= SSPL). Search and you'll find it.
I had to return my handset and returned to different official ROM and SPL than supplied by the operator. So I would suggest to use 1.93 for both check this post/thread. Once you have your phone back to 1.93 for both SPL and ROM - Load your 2.03 ROM which should update the SPL too.
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
Check the top of the same thread too HERE
if you search ( ReStore Hard SPL ) you can see my post about your problem
Hello, and everbody hello,
please tell me, is it possible people from company where i buyed HTC diamond
Diam100 64m
microp-diam (led) v11
psoc-diam stage_pvt v0x32
to discover, am i changed STOCK SPL to HSPL unsigned, when i back to STOCK SPL uploaded in post #20 , i'm not sure which one from that post to use ?
1.34, 1.38 , 1,93 or ?
I'm not sure what was originally - stock SPL which came with my phone , i sent mail to HTC support to ask him, do they know to tell me over S/N what was first originally SPL on my phone, but they tell me all information what they have, but not 1st version of SPL.
Information are like this
SN :HTxxxxxxxxxxx IMEI :xxxxxxxxxxxxx Part Number :xxxxxx-00 Part Description :SKU,HTC,Swedish,SWE,UMTS 900/2100,Cut,Black,Diamond-XX,w/oSIM LockSIM Lock Customer Name :xxxxxxx : HTC Model DIAMOND-XX
this phone is buyed in Sweden, and my problem is, i don't know what version of STOCK spl from post #20 to use for warranty, cause i have to send my phone in service for repairing, but what Stock SPL to use, for no discovering from people which work in repairing service?
I remember version of stock rom was 1.93 Swedish, one before latest, but for SPL i'm not sure, maybe 1.34 or 1.35, i scarried they will discover me, i used HSPL, and i don't know what stock SPL to put on my HTC for warrant and no discovering about using another SPL-s like HSPL , unsigned,signed etc..?
Tnx in advance everbody for help!
God bless you
Greetings
p.s.
Phone is buyed - unlocked, not signed for some mobile operator or similiar! It came just with stock ROM - 1.93 swedish, and maybe 1.35 spl or maybe 1.93, it's buyed before 1-2 month, maybe that will help me to discover which was stock SPL, and which one i have to use for warranty?
please somebody help, cause this is urgent for me, i have to send phone in service today
tnx in advance,
greetz