Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Hi i just had my Artemis back from tmobile, i had bricked it by updating rom..
so now is my question can you backup your ROm?
So if i brick it i can replace it ?
Mt
44 views still no solution...
let me give you a good advise!! many people used those coocked roms and ended with a bricked or non functional device included me!
i did a back up of my rom and restore it after i had so much troubles with wm6!! now i send it to t-mobile for reparation and hope they will help me because i unlocked my artemis.
@lommer you still have problems after restoring the original ROM?
drkbg said:
@lommer you still have problems after restoring the original ROM?
Click to expand...
Click to collapse
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.
lommer said:
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.
Click to expand...
Click to collapse
i dont think that has anuthing to do with the ROM..
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Flower said:
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Click to expand...
Click to collapse
Sameproblem, someone has a solution?
There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!
bravo2001 said:
There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!
Click to expand...
Click to collapse
Already tried that 60 times... i think i need a original dutch tmobile rom...
Today i tried to flash my PDA back to amazing artemis 1.0
beacuse i like it
but i had stuck in my computer I stoped flashing but my mobile is not working and not charging
it's not macking boot loade mode
please help me
sorry for my bad english
remove battery during several minutes and try again to enter in boot loader.
thank you brother ofter remove th battery for 10 minutes the mobile worked on boot loader
thanx bro
How to entering into the Boot Mode my P3300?
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
You can find it in the Artemis Wiki, this is the page you'd have found - http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
THANKYOU MR Sanco60 THANKYOU VERY MUCH FOR YOUR IDEA OF SWITHCH ON IN BOOT THANKYOU MY DEAD MOBILE NOW SHINES
sanco60 said:
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
Click to expand...
Click to collapse
Hi,
you've removed the microSD, right?
If yes, did you try with the original ROM for the P3300?
p800=p3300, but i'm not 100% sure...
bye,
Silvio
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
[email protected] said:
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
Click to expand...
Click to collapse
Hi
Original ROM? Didn't work?
O.T.: Are you Italian?
Bye,
Silvio
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
[email protected] said:
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
Click to expand...
Click to collapse
Are you sure that have you removed the SD card when you flash?
O.T.: me too, if you prefer to speak italian with me you can write in Italian in O.T. but you must wrote also in english
Bye Silvio
P.S. I don't speak English very well
Yes the Sd is off,
PS: Compared with mine your English is good
[email protected] said:
Yes the Sd is off,
PS: Compared with mine your English is good
Click to expand...
Click to collapse
ok, but you have the SPL blocked?
P.S. I don't think...
Yes unfortunately....
you can try to extract the nbh file from the executable of the original ROM and with SD Flash but I'm not sure ... I'm sorry, now I must run away, see you tomorrow
Bye,
Silvio
. I don't speak English bat understain
Compared with mine your English is good
Compared with mine your English is good
please help please!!!!!!!!!
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
johanis1982 said:
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
Click to expand...
Click to collapse
What ROM did you try to flash?
Bye,
Silvio
So people, hi....
I have some trouble to flashing this rom i sayed..
When i go to the 3 colours screen, appear (1.40Olinex)
I guess this is 1.93 or not??
Anyway, the athena rom flashing succesfull but when restart, the cellphone automatic, (after finish flashing program) .... Appear the first image, where loading that three letters ( RGB with a code) ...
So when appear this letters the phone shutdown, and start's again...
Somebody can help me to fix that?
I have try everything, and just keeping restart....
Wait awnsers! c ya!
Soooooo!?!?
Nobody can help here? .. come on people... what going on!??
Somebody can help me, turn back my phone to normal?? pleasee!!!
dehzincwb said:
Soooooo!?!?
Nobody can help here? .. come on people... what going on!??
Somebody can help me, turn back my phone to normal?? pleasee!!!
Click to expand...
Click to collapse
Did you try flashing any other ROM ?
yup i tryed... and happens the same error....
What i do??!?!
(For flashing new room i made this way: Make a soft reset (press reset button + vol down) to appear the 3 colors screen. So I turned on my DiamongUpdate, and confirm the first windows, make a update, so when I click on next button, appear the progress bar, 0% I wait like a 20 seconds, and the progress go fast to 100%, 0 to 100% in 1 sec. So after appears succesfully and finish the flashing, so my phone reset, I take off the usb cable and appear the first load image on my phone appear the tre letters ( R G B ) .. and make a reset again.! ...
How I can get out this problem!!!?!?! help people!!! help me!!
try flashing a stock rom if it deosnt work try formatting with mtty
GMX81 said:
try flashing a stock rom if it deosnt work try formatting with mtty
Click to expand...
Click to collapse
thx... i gonna try this.. I think the better its format with MTTY.... but I never used this.... but... its my last hope! thx
Hi guys,
Can anyone help me here ?
When I try to start up my Phone, it always loads the bootloader ...
I tried running reflashing a rom and task29, but no help there :s
Does anyone have an idea what to try ?
Tnx
Nick
Some people with the same problem said that their batterie was broken. Can you try another batterie?
I'll give it a try
Will let you know ...
Lennyz1988 said:
Some people with the same problem said that their batterie was broken. Can you try another batterie?
Click to expand...
Click to collapse
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Trickass said:
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Click to expand...
Click to collapse
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
MCbrian said:
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
Click to expand...
Click to collapse
No, I'm not doing that
I thought maybe it got stuck though, something like that :s but when I do press it, I hear a pretty clear "click", so I guess it's not broken at all...
Also, I noticed that when I try to reflash a ROM, the "current image" (or whatever it's called) is blank ...
(I mean the thing that sais the version number of the currently installed rom)
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Same issues.
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
ultramag69 said:
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Click to expand...
Click to collapse
Lol yeah I know that
Thanks anyway
Frederic.james said:
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
Click to expand...
Click to collapse
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Trickass said:
Lol yeah I know that
Thanks anyway
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Click to expand...
Click to collapse
Hummm i have see somwhere a howto for mtty on W7... but i'm a little lazy i have choose to do this on a old windows xp
But this command are just temporary i'm searching for something more stable !
Some news from my Rhodium Stuck in bootloader
I have try to Hardspl it (Olinex 0.85)
The good news is i have manage to do it, the bad news is after that even the
set 14 0
don't manage to make it boot.
After a while searching, (thanks wiki of another phone) i have find those command :
password BsaD5SeoA
set 14 0 # Maybe it's usless now but in fact i don't know
set 1 0
task 8
And now i'm back to my start....
I tried using the MTTY commands, and when I did it the first time, the phone booted and performed its "first run setup" thing.
After rebooting though, it went back to the tricolor screen, and I can't get past it anymore, even with the same MTTY commands ...
Any other ideas ? :/
mtty, a lot of post on the internet...
hi,
I think we are a the same point !
I have find a way to start a boot with the HTC screen but the phone tel me that a txt file is missing on the sd card ???!!!???
with mtty :
boot
yes it's quite simple why i haven't think of that befor i don't know... but that didn't solve my problem at all.
I have send a mail to HTC in order to have a diferent point of view but all they said to me is doing a hard reset (who didn't do anything...)
I will post the avancement of my test but i feel a little stuck.
Note : After searchin on the internet, the set 14 0 tel to the phone to boot on the os after a flash (sometime the phone don't reconize the end of flash)
the set 16 0 (or set 16 1) disable (or enable) the RUUNBH tag on boot loader.
More Infos...
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Frederic.james said:
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Click to expand...
Click to collapse
Oke, I will try to take out the battery tomorrow as well ... Although, I tried using a different battery and it didn't help ...
Right now, I managed to boot using mtty set 14 0 > task 8, which seems to work
(sometimes, I need to do the task 8 twice in a row ...)
So as of now, I managed to flash a stock rom onto the phone, and only have to try and reset hardspl back to stock as well.
Waranty here I come ...
lol mine is out of waranty, and it's the solution i ve find everywhere !
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
PUTALE said:
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
Click to expand...
Click to collapse
yes, i've try it (HTC has send me the same advise) and... same issue !
In order to done the hard reset (who didn't execute when the phone is to boot in bootloader) i have do a set 14 0 and reset with power and holding the two call hang and power.
But thanks for the advise !
Frederic.james said:
lol mine is out of waranty, and it's the solution i ve find everywhere !
Click to expand...
Click to collapse
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Trickass said:
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Click to expand...
Click to collapse
Hum it's the phone of a firend who give it to me... and he has buy it on e-bay.... for the waranty sound difficult to retreive a bill and... I will search till i find something to do