Hardware button that will keylock? - P3300, MDA Compact III General

Hi there,
Is there a really simple FREE low memory program that will allow you to assign a hardware button to toggle the device/key lock on & off?
i.e. pressing & holding the end call softkey rather than hitting the today screen plugin.
Thx,
GW

No-one have a solution for this?
If topic alady covered, apologies. Please direct to post if one is present

Hi Gulioth,
I've tested two solutions for your problem
1. is slide to unlock, also known as SU2
You can start his app by pressing a predefined key.
2. Install the htc home customizer plus htc home. On the tap apps, you can define a shortcut to lock your device. it is the simple WM lock.
For me the last solution appeared to be the best, although you have hit the screen.
If you can't find the apps, post again and I'll try to find the links

Thanks for feedback & suggestions.
I cannot use the htc home customizer plus htc home as it's causes the phone to lag & crash frequently.
Just looked at S2U2 & I think it would do the job however which version would work well with the Artemis/XDA Orbit?
Are there other alternatives?

Anyone help us out here? Just want to know if S2U2 would be the best solution for my query, and if so, which version would work best for this handset? Also any alternative recommended programs out there?
Cheers

hey,
I use S2U2 as screen locking. Currently have the latest version and works fine with the artemis, although sometimes when unlocking, the screen gets locked immediately again.
there are some other apps like throttle lock, but I don't know those can be hooked to a key like you say (i.e. pressing the red button two seconds or so)
such a key-hook would be great!
unfortunately I don't know about programming for WM
greetzz

amfasis said:
hey,
I use S2U2 as screen locking. Currently have the latest version and works fine with the artemis, although sometimes when unlocking, the screen gets locked immediately again.
there are some other apps like throttle lock, but I don't know those can be hooked to a key like you say (i.e. pressing the red button two seconds or so)
such a key-hook would be great!
unfortunately I don't know about programming for WM
greetzz
Click to expand...
Click to collapse
Ok thanks I'll give it a go.
One last thing - is it best to install the QVGA or VGA version for the Artemis??!

since the artemis screen is 320x240 which is a quarter of VGA (640x480), QVGA would be the choice

amfasis said:
since the artemis screen is 320x240 which is a quarter of VGA (640x480), QVGA would be the choice
Click to expand...
Click to collapse
LOL I figured it out cheers
At the risk of being a smarta$$ - wouldn't a quarter of 640x480 be 160x120??!!

640 x 480 = 307 200 pxl
320 x 240 = 76 800 pxl
307 200 / 76 800 = 4
Here is the quarter

Related

[REQ] Action Screen for HD with 12btns

Hi everyone
Is there a chance that someone of you guys (your really great in this forum!!!! Have to thank you over and over ) could make a 12 buttons version of the "Action Screen App" released by Fabliv for the Touch Diamond?
See his Thread here: http://forum.xda-developers.com/showthread.php?t=422136
So for exemple there could be buttons for "sighs sorf reset app", a button for the calculator or/and a button for beyondpod or so. I think the possibilities are infinite!
Hope someone can create such a app!
Thanks in advance!
Ascenca
That looks like a really cool app. Would be great to have a main tab in TF3D for it as well, called "Shortcuts" or something.
That's a great idea, I would be very interested if this gets available for the HD! I hereby declare myself available for beta-testing if needed
I was thinking 12 buttons may be a bit much... I thought 9 buttons would fit better (the screen is only 160 pixels longer than the Diamonds VGA display).
However, when I look at the programs tab in TF3D, 12 will probably work fine
Yes it would be amazing have still buton for "soft reset" and maybe "mute","turn orientation screen" for example. I used action with 9 icon in my diamond and now still in my HD. This is very helpfull app.
Hi...
I have a same idea...
but i don't now for the other 3 button...
if you have an idea...
For Example: tom tom, igo ecc....
What we put ourselves in these three new buttons?
Excuse me for my english....
Hi guys
so is there nooone with the knowledge (and the time) to do the mod on the Action Button Program with 9 buttons to a version with 12 buttons?
Think many would appriceate is, most of all me
Ciao
Ascenca
Ps: HAPPY NEW YEAR TO ALL!
bump please
For those who have tried, can you tell me if the existing 9 button version works with HD?
Would it simply add an extra tab to the TF3D?
Have the version 6.1 installed of Action Button and works perfectly. Doesnt add a tab in TF3D but you it will replace the left softkey button in the today screen of TF3D. Easiest way to start AS!
Amazing program in my opinion!
tboy2000 said:
bump please
Click to expand...
Click to collapse
What you mean by that? Dont understand what want to say (perhaps due I am swiss ).
Ascenca
bump please.
Link please.
Ascenca83 said:
Have the version 6.1 installed of Action Button and works perfectly. Doesnt add a tab in TF3D but you it will replace the left softkey button in the today screen of TF3D. Easiest way to start AS!
Amazing program in my opinion!
What you mean by that? Dont understand what want to say (perhaps due I am swiss ).
Ascenca
Click to expand...
Click to collapse
Hi Asceneca,
where did you find version 6.1? I can only find version 6.
Can you reassign the buttons? Does it run full screen on the HD?
Thanks
tedkopp said:
Hi Asceneca,
where did you find version 6.1? I can only find version 6.
Can you reassign the buttons? Does it run full screen on the HD?
Thanks
Click to expand...
Click to collapse
Hi tedkopp
the version 6.1 is only a 9 button action screen.
Below I posted links to two threads which point to the 12 button version of AS!
http://forum.xda-developers.com/showthread.php?t=473059
http://forum.xda-developers.com/showthread.php?t=496759
Hope you will find what you are looking for in those threads.
And yes, the 12 button version runs full screen on the HD.
To reassing the buttons you have to deal with the xml files of action screen. Search for it in the forum.
Hope I could help!
Gruess us Basel
Ascenca
That's exactly what I was looking for.
Looks great on the HD
Thanks Ascenca
if you would use the search button (just click search and write:action screen) you might stumble upon this also:
http://forum.xda-developers.com/showthread.php?t=496631&highlight=action+screen
in my opinion is the best!

SCUMMVM help

Hey guys,
Installed SCUMMVM onto my Touch HD and set in the options to go fullscreen 2x.
The problem now is the screen is left justified whereas the device thinks it's central. The upshot is that the stylus needs to be touched about quarter of an inch to the right of the deisngated area.
Anyone know how to solve this...
Thanks in advance
Hi
You have to use WVGAFIX3
where i can find SCUMMVM and the WVGAFIX3?
thx!
scootz said:
Hey guys,
Installed SCUMMVM onto my Touch HD and set in the options to go fullscreen 2x.
The problem now is the screen is left justified whereas the device thinks it's central. The upshot is that the stylus needs to be touched about quarter of an inch to the right of the deisngated area.
Anyone know how to solve this...
Thanks in advance
Click to expand...
Click to collapse
The solution is to rotate the screen 180 degrees while a game is running (5th icon below the screen). Then the input is not shifted anymore.
Hi,
paranoid2007 said:
The solution is to rotate the screen 180 degrees while a game is running (5th icon below the screen). Then the input is not shifted anymore.
Click to expand...
Click to collapse
Edit the file <scummvm.ini> and add this line:
landscape=2
This will make ScummVM start with the correct orientation. That way you wont have to rotate the screen manually everytime you're in a game
Regards,
Rolf
Hope, SCUMM will be full WVGA compatible soon.
No need to apply the fix. Just tap twice on the monkey icon and everything will be ok (corresponds exactly to the landscape = 2 manipulation described here above). Even if you do it manually, ScummVM will be remember that setting for next time - you can configure that setting for every Scumm game and for ScummVM itself. With landscape = 1, the touch response does not work correctly. With landscape = 2, the touch response works properly. No way to centralize the screen though.
Regarding WVGA compatibility, from what I understand there will be no such compatibility. This does not have to do with ScummVM but rather with the games which run on the Scumm engine. In particular the older ones run on non-wide screen resolutions. Consequently, any WVGA scaling would result in stretching the images, unless you wanted to get rid of the ScummVM menu bar during the game. That would require reprogramming the interface with context menus to replace that menu bar.
Georgeous2008 said:
No need to apply the fix. Just tap twice on the monkey icon and everything will be ok (corresponds exactly to the landscape = 2 manipulation described here above). Even if you do it manually, ScummVM will be remember that setting for next time - you can configure that setting for every Scumm game and for ScummVM itself. With landscape = 1, the touch response does not work correctly. With landscape = 2, the touch response works properly. No way to centralize the screen though.
Regarding WVGA compatibility, from what I understand there will be no such compatibility. This does not have to do with ScummVM but rather with the games which run on the Scumm engine. In particular the older ones run on non-wide screen resolutions. Consequently, any WVGA scaling would result in stretching the images, unless you wanted to get rid of the ScummVM menu bar during the game. That would require reprogramming the interface with context menus to replace that menu bar.
Click to expand...
Click to collapse
I think the guy just wanted the game to be showed at the center of the screen, and not on the left.
AntoCorsa said:
I think the guy just wanted the game to be showed at the center of the screen, and not on the left.
Click to expand...
Click to collapse
In the case you should re-read the first post.
Hi, dit anyone resolve the problem with 2 cm black lines below and on the right side? It looks as a wasting of place. Thak you.
ares333 said:
Hi, dit anyone resolve the problem with 2 cm black lines below and on the right side? It looks as a wasting of place. Thak you.
Click to expand...
Click to collapse
that is a phenomenon called VGA resolution on WVGA resolution.
Psygnosis84 said:
that is a phenomenon called VGA resolution on WVGA resolution.
Click to expand...
Click to collapse
and only developper can solve it it's their job to make it work on WVGA resolution
Zepiii said:
and only developper can solve it it's their job to make it work on WVGA resolution
Click to expand...
Click to collapse
a new version is out, but still no wvga support. a shame
i just found this and have already used it on my pc now i want to use it on my touch pro...
i downloaded the win ce version
istalled it on the card and it turns on once wont run mi2 then wont turn on a second time
Which version are you guys trying?
Current version is 0.131.1.

[APP][Updated 17-12-2009] TouchLockPro 2.9 with *NEW* Zoombar unlocking

TouchLockPro is a general purpose locking program, which also works on the Touch HD.
See TouchLockPro thread for more details.
Version 2.0
I uploaded version 2.0, which fixes some (small) issues and added some features, like unlocking when sliding the keyboard out (if available). See Version 2.0
[APP][Updated 11-01-2009] TouchLockPro version 2.1
I just uploaded TouchLockPro version 2.1. Hope this version is again more perfect.
TouchLockPro is indeed great. However, on the HD, I find its use limited, as there is no good unlocking mechanism in place. I keep it installed for the BattClock, but I simply can't get comfortable with having to pull out the stylus to unlock, or wave the phone in front of a light source. (The HD light sensor doesn't seem very reliable.)
Heck I admit it, I often surf with Opera in bed, in the dark - the stylus is the only unlocking option, and it annoys me.
If TouchLockPro could get a touch gesture unlock, like PocketShield or ThrottleLock, I'd be happy. There doesn't even have to be a UI - as long as it's fast and reliable.
ThrottleLock appears to late (I can interact with the screen before the ThrottleLock asks for the gesture), otherwise it would be mighty fine.
PocketShield is much better in this respect. I just can't get it to work comfortably with answering the phone. I've hung up on so many calls now, unintentionally, that my wife told be to FIX IT.
ugumba said:
TouchLockPro is indeed great. However, on the HD, I find its use limited, as there is no good unlocking mechanism in place. I keep it installed for the BattClock, but I simply can't get comfortable with having to pull out the stylus to unlock, or wave the phone in front of a light source. (The HD light sensor doesn't seem very reliable.)
Heck I admit it, I often surf with Opera in bed, in the dark - the stylus is the only unlocking option, and it annoys me.
If TouchLockPro could get a touch gesture unlock, like PocketShield or ThrottleLock, I'd be happy. There doesn't even have to be a UI - as long as it's fast and reliable.
ThrottleLock appears to late (I can interact with the screen before the ThrottleLock asks for the gesture), otherwise it would be mighty fine.
PocketShield is much better in this respect. I just can't get it to work comfortably with answering the phone. I've hung up on so many calls now, unintentionally, that my wife told be to FIX IT.
Click to expand...
Click to collapse
Indeed my next highest priority is implementing a gesture to unlock using the GSENSOR, which was already on the TODO list. You could consider to use LockTouchPanelOnly=1, so the hardware keys are not locked and couple a command to a hardware key: "TouchLockAction.exe" unlock. Of course there is a chance that the hardware buttons are pressed in that case, when it is in you pocket. Other people using TouchLockPro in combination with Phone Canvas. They use TouchLockPro for general locking and unlock the phone automatically by TouchLockPro when there is an incoming call: commandCallIncoming = "TouchLockAction.exe unlock"
TouchLockPro 2.2.1 with GSENSOR support for unlocking
I just uploaded TouchLockPro 2.2.1 with GSENSOR support for unlocking.
TouchLockPro version 2.3
TouchLockPro version 2.3 is available.
Hi,
This seems to be a great app. But I have a serious problem.
Right after installation I get the messages
“ a problem has occurred with touchlockpro.exe”
And then after a soft reset the messages
“ Could not create TouchPanel Hook.“ Comes up and the application fails to start.
.
Do you have any idea what the problem might be?
HTC Touch HD
WM 6.1
ROM Version : 1.14.421.5
Radio version : 1.09.25.14
Regards
Henk
Nologic said:
Hi,
This seems to be a great app. But I have a serious problem.
Right after installation I get the messages
“ a problem has occurred with touchlockpro.exe”
And then after a soft reset the messages
“ Could not create TouchPanel Hook.“ Comes up and the application fails to start.
.
Do you have any idea what the problem might be?
HTC Touch HD
WM 6.1
ROM Version : 1.14.421.5
Radio version : 1.09.25.14
Regards
Henk
Click to expand...
Click to collapse
Hi Henk,
which version did you install? the latest version 2.7.3?
I did not get this problem report from other users, and there are a lot of Touch HD users. You can try to set DoubleTouchPanelLock = 0, because some people have problems with this setting.
The "Could not create TouchPanel hook" message means that some other program is running which applies the hook before TouchLockPro can. Which Today screen do you have, TF3D?
You can also enable debug logging LogDebug=1 and post the debug log file \TouchLockPro.log.txt as zipped attachment. Maybe that gives me a clue
Hi,
Wow, quick response. I appreciate it!
Where do I set the “DoubleTouchPanelLock = 0”?
The only application that start up with the phone is TF3D.
I think you might be right, some other application is interfering. Can it be TF3D?
I’ve seen now that I can access the application after start-up from the application menu. It still gives me an error but I can use it.
This is a fantastic application, I will defiantly donate so soon as finances permits
MOD EDIT
Moved to Themes, Applications and Software forum
Hi,
I have Hard Reset my device and installed TouchLockPro. It work perfectly.
Must have been a application somewhere that was the culprit
Thank you
Henk
Nologic said:
Hi,
I have Hard Reset my device and installed TouchLockPro. It work perfectly.
Must have been a application somewhere that was the culprit
Thank you
Henk
Click to expand...
Click to collapse
Hi Henk,
good to hear that your problem is solved
*NEW* Zoombar unlocking also working on HD???
TouchLockPro version 2.9 now also has a *NEW* Zoombar unlocking. I expect this is also working for the HD. Could someone confirm it is actually working Because I cannot test on HD.
My expectation is that it works also on HD, because it works on Touch Pro 2 and Diamond 2.
I couldn't get the zoom bar working on the Touch PRo 2... I know it wasn't the question asked but worth mentioning.
some of the functionality seems not to work on the touch pro 2 with the telstra roms.

[PATCH] WVGA - FIX for Navigon Mobile Navigator MN7 v 7.3.2 (Workaround)

Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Indeed. The 7.3.2 did not launch and I had to soft reset my Touch HD.
Thanks for your files !
Do you know what are the changes brought by 7.3.2, otherwise than the WVGA resolution failed attempt ?
Does not work good.
But good Try.
Cool
Working perfect for me
Thanks a lot
where find 7.3.2 ?
thank you
taz22 said:
where find 7.3.2 ?
thank you
Click to expand...
Click to collapse
All updates (maps, software, ...) are done via Navigon Fresh.
thank you
very much
i m stupid
dodo34 said:
Does not work good.
But good Try.
Click to expand...
Click to collapse
what exactly do you mean?
Probably he means that - at least for 480x800 - not better than what was given at
http://forum.xda-developers.com/showthread.php?t=446487&page=15 post # 148
but anyway thanks for other resolutions.
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
raz0r09 said:
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Click to expand...
Click to collapse
if you haven't changed any gps settings on the hd itself and if you don't use any port splitter like serilot or glopus, it should work with the following manual gps settings in navigon setup:
GPS Type: Internal GPS only
GPS-Port: Com4: ActiveDevice
GPS Baudrate: 4800
TMC: None
at least that works for me...
good luck
regards jan
NoRescue said:
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
Click to expand...
Click to collapse
You have to make sure that the screen is in landscape mode (which means not only hold the device in landscape, but have an open window (i.e. file explorer) which actually is displayed in landscape) BEFORE you start MN7, and it should stay like that all the time. MN7 gets "confused" when you change screen orientation during operation. maybe you should exclude it from your g-sensor app.
hope that helps...
regards jan
Update to MN7.3.2
I Have problems updating to 7.3.2.
Have copied the Software (7.3.1) to the HD in HDD-Mode and installed everything. Then Installed NavigonFresh on my PC and plugd in my HD in HDD-Mode. When I hit Update Navigon-Sofware I get the massage: "Ungültige Gerätedefinition" (=>Invalid Devicedefinition)
What am I doing wrong? Created an Account and everything. Do I Have to buy MN to Update?
MN7
What did I do wrong - Icopied the binaryconfig file as you said but when I launch MN7 still no display. Can you help?
HD switching off
Hi all,
Since I have installed navigon MN7, my HD does not switch off automatically anymore.. That's very bad for the battery. Any idea how to solve this problem?
Thanks !
See http://forum.xda-developers.com/showthread.php?t=446487&page=43 (hope this becomes a link), post #423. The hard reset may not be necessary; I did it because I wanted to clean the device of any unexpected effects which I was afraid would have been created by MN7 using the "wrong" xmls. Sorry I tried both on my PC (the installation program) and on my HTC HD (my trail version) but coud not find a menu option saying which version of MN7 I have!
Thank you hausen, it works perfectly on my Diamond2!
Hi all,
today i've bought a Navigon Mobile 7 for my HTC HD2, installed, updated via Freshstuff and till this morning my NM7 wouldnt start at all...i modified it with the files provided here (.xml) tried with soft and hard reset, uninstalled Copilot Live 8 (thought was a kind of conflict). The manual say:
- use 2 gb sd micro card to install the software..i've used 4 gb and 8gb...maybe is mandatory???
the program start and remain freezed fro few second (without any welcome screen, just the pda freezed...) then i checked in the task manager and i saw was in run using 2.49 mb of resources and i had to stop it few time...
now...any solution about? or i have to be again a bad guy and stop to buy software but just have to keep download cracked software?
Thank you all for the answers,
S. aka Dr. Dobermann...ANGRY...really ANGRY!
thanks
hausen said:
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Click to expand...
Click to collapse
might actually work

Press Any Key To Wake

There is an old PPC feature that seems to be missing from this phone (TP2 Sprint) and that is the option to wake the phone (turn on from stand by) by "Pressing Any Key".
This used to be a feature under settings, but not there on this phone. I think it would go perfect with S2U2. Can anyone tell me if there is a reg entry I can do, cab I can download or _____? to make this happen on the TP2?
Thanks
-D
I second this request. In addition I would like to be able to suspend the device (put the device to sleep) when I hit the end call key ONLY when I am on the home screen. My Treo 750 did this and i liked that b/c I do not like always going to the top of the device to hit the power button. Thanks in advance for anybody that can help.
Both seems like good suggestions & now that i think about it....i want them too!
Once again, thank you too anyone who can sort them in advance!
Power Button To Resume Alternative
I agree, how can we set our phones to resume from standway by pressing screen / other buttons?
Thanks,
Michael
If you want to wake up TP2 by any hardware keys, please try: HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD "KeyLock" = 0 (default is 1) then Reset..
ohyeahar said:
If you want to wake up TP2 by any hardware keys, please try: HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD "KeyLock" = 0 (default is 1) then Reset..
Click to expand...
Click to collapse
Perfect! Thanks. That did it.
And it works perfect with S2U2 so no accidents.
OK I am going to 2nd the the "end to suspend request" too. Personally I would prefer the press and hold of the red end key to have an option to power down (suspend). Anyone got an answer for that? That would really get us ex-treo users in the goove
-D
Additionally, is there any way to make the device resume by only pressing the end call key and not just any of them.
ohyeahar said:
If you want to wake up TP2 by any hardware keys, please try: HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD "KeyLock" = 0 (default is 1) then Reset..
Click to expand...
Click to collapse
Hi guys,
My tp2 used to wake up on any hardware key , but after the upgrade to WM6.5 available on HTC we site , it stopped and now it just wakes up using the power button.
I have tried with no success:
- Keylock changes in the registry
- AE Button Plus
- Keylock.exe
- CS Dev control
I know that this is not big deal for some, but for me is kinda annoying as i was used to wake it up using the hardware keys.
Anyway, thanks for your time and i would appreciate very much if anyone has any suggestion on this matter
Thanks
try this: http://www.fuzemobility.com/wake-up-your-fuze-without-the-power-key/
I can't upload files now but if anyone wants to post the file please do. I can email the file as well if you PM me. Chrome is just blocking uploads to XDA for some reason...
bugsykoosh said:
try this: http://www.fuzemobility.com/wake-up-your-fuze-without-the-power-key/
I can't upload files now but if anyone wants to post the file please do. I can email the file as well if you PM me. Chrome is just blocking uploads to XDA for some reason...
Click to expand...
Click to collapse
Hi
I don't know what happened to my reply to your post sent on the same day you send yours, but anyway , thanks for your prompt answer, but i have tried that app already without success. I
Thanks
ohyeahar said:
If you want to wake up TP2 by any hardware keys, please try: HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD "KeyLock" = 0 (default is 1) then Reset..
Click to expand...
Click to collapse
Thanks for the tip. It works like a charm on my Tilt2.
Hi All
Good news. For those who upgraded their TP2 to WM 6.5 and now are having problems to wake up the device with any other key apart from the power button, even using the tips from the previous messages in this post, here is how i solved this problem today.
I used the application "Rhoduim Keyboard Controller" from the post :
http://forum.xda-developers.com/showthread.php?t=554240
attention for the red line :
This is for Rhodium only! Do not try to install this on other devices!
Also a good list of applications for TP2 can be found at this post, and it was there were i found the "Rhoduim Keyboard Controller"
http://forum.xda-developers.com/showthread.php?t=550973
I hope this will be helpful for someone.
does anyone know if it would be possible to wake the device from a quick double tap?
ohyeahar said:
If you want to wake up TP2 by any hardware keys, please try: HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD "KeyLock" = 0 (default is 1) then Reset..
Click to expand...
Click to collapse
I am a noob, and was wondering where do I go to change this registry. plus can i change it without have a registry editor of any sort?
Interestingly, installing Rhoduim Keyboard Controller allows keylock.exe (attached) to work. Rhoduim Keyboard Controller looks like an excellent app but a little complicated for what I want to achieve. I just want my "do not lock buttons" option back, and that's what I've got.
I'm running a UK TP2 with WM6.5.
If anyone is intersted, I use my TP2 with Memory Map (a topographical mapping app) in an otterbox. The problem is, without being able to turn on the TP2 from the front buttons you have to open the box to get to the power button - defeating the object of having it in a protective box!
Hope this is of some use to someone.
cd993 said:
does anyone know if it would be possible to wake the device from a quick double tap?
Click to expand...
Click to collapse
I've searched for this also. The reg edit in the pervious post works like a charm, but I would like to take it a step further but waking up my phone with a screen tap or dbl tap.
Thanks

Categories

Resources