I have the HTC Touch HD for a few days now and I love it.
I only have the following problem with wireless network connection.
At home I am using a dynamic IP address at work an static address (wtih different DNS and gateway settings)
Does someone knows an program to set these settings for the different connections?
Thanx!
No one any idea
I think other persons will have the same problem. A tool should be available right?
you shouldn't have any issues really. It's odd that you doi. I use mine to connect to multiple wireless networks and it all works fine.
When you turn on the wireless to connect to a new network it will pop up at the bottom and tell you the networks it has found. Then you choose the network you want and connect to it. This will then store it as a favourite connection. Once this has been done whenever you turn on your wireless it will look for networks in range and then automatically connect to which ever one is in range in the Favourite connection list.
Your connection list can be accessed through Start>Settings>Connections>WiFi then Wireless networks. It may be advisable to delete them all and start again if you are having problemss.
Thanks
Dave
You're right for the wifi settings. But the ip settings (static / dynamic gateway dns) are not set through the wireless connection.
But I have found a program called wifiprofiles which does exactly what I want
Related
I just bought one of these and can't get it connected. I have a netgear wg602 access point, and have configured the IP address manually (I know IP, dns and gateway are right)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Can you ping the XDA from any other station on the network ?
Is your network 802.11b or 802.11g or both ?
both
No, I can't ping the xda from anywhere else. The access point is both. I have two other stations - one on g and one on b.
thanks
Dave
Must be something in the config on the XDA.
If you look at the settings for the WiFi network card on the XDA what does it say it connects to..."Work" or "The Internet".
Try changing that and see if that helps.
If you want networking diag tools for pocketpc try these :
http://www.cam.com/vxutil.html
Includes:
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
looks like a no then
I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.
no good anyother ideas. i have searched through hundreds of threads and still no go
help pls
Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.
i have done this on both my wifi network and my isp network.
still not working
Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )
these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1
Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1
hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.
Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.
Hi,
I'm experiencing a weird problem and please let me know if it's only my problem or there is some work around for it.
My phone is SX66 upgraded to 1.40 ROM + 1.13 Radio stack
I can connect Wifi fine whenever I have some phone signal (at work). Whenever I go home where the phone signal is weak then the WIFI couldn't get connected (I believe I set up my home network correctly as I've been using it for so long and configure it for several computer/laptop in house). The network could detect the AP with the SSID but I just couldn't connect to it even I'm sitting right next to the AP.
ROM 1.40
Radio: 1.13
MDD
Are you sure it isn't connecting? What has led you to this conclusion?
Is it possible that it is connecting, but that you just can't browse the internet, in which case check your connection proxy settings. If your work uses a proxy server and you've enabled the pass-through setting in ActiveSync, your network connection may be configured with your work proxy server.
If you're sure you're just not connecting however, things to check are;
WEP/WPA Encryption - If you're using it and have other wireless devices on your network, you no doubt know what to do. If not, say so & I can help you.
DHCP - Does your router/AP support Auto-IP Addressing? Is it enabled? If not, you'll have to configure the WiFi card with a static IP within the same subnet as your router. Ask if you need help.
MAC Filtering - Are you blocking unauthorised MAC Addresses (on your router/ap)?
Interference - Wireless A/V Senders and digital cordless phones are common culprits for RFI. 802.11x APs support multiple channels (most default to channel 11), and you can change these in case of interference. Once again, if you have other WiFi gear already connected with good, strong signals, you can probably discount this one.
Sorry if this is all elementary to you - I don't know how technical you are.
Thanks for your reply.
> Are you sure it isn't connecting? What has led you to this conclusion?
Yes, I've check wireless status on the phone. "Connected to the network", and the AP with DHCP on showed the status of an IP has been allocate to the SX66 mac address. However I dont' really believe it then I check the "Adater", it said network available, and the WIFI icon just didnot show any traffic.
> Is it possible that it is connecting, but that you just can't browse the internet, in which case check your connection proxy settings. If your work uses a proxy server and you've enabled the pass-through setting in ActiveSync, your network connection may be configured with your work proxy server.
I've experience once with the internet connection via Active Sync so I disable the passthrough. Both home and work doesn't have proxy server so I selected not to have any on the phone.
> WEP/WPA Encryption - If you're using it and have other wireless devices on your network, you no doubt know what to do. If not, say so & I can help you.
At work, I have 128 WEP and the connection works fine with the key. At home, I open my network but using MAC filtering to protect it. I have problem with the open network one at home. Perhaps, I will try to setup WEP at home and see if it can work.
The only thing I'm not really clear is the difference between setting "WPA" and "WPA-PSK" from the phone.
> DHCP - Does your router/AP support Auto-IP Addressing? Is it enabled? If not, you'll have to configure the WiFi card with a static IP within the same subnet as your router. Ask if you need help.
Yes, DHCP enable as I don't want to change it back and forth when traveling.
> MAC Filtering - Are you blocking unauthorised MAC Addresses (on your router/ap)?
I do it and I already opened the network and then captured the MAC address into the AP memory. (that's why I think it's connected but will check).
> Interference -
Not really, I'm 6' away from the AP and I don't have any cordless device in my computer room.
> Sorry if this is all elementary to you - I don't know how technical you
are.
No problem, I'd like to learn more about this PDA. The concept is about the same with PC, but the tools to debug is not there. I can't use tracert/traceroute, ifconfig or ping broadcast to really know if I'm the network.
Once again, thanks a lot.
Okay, well it sounds like you're on the right track & know what you're doing.
A useful troubleshooting tool, which gives you tracert, ping, whios, ipconfig and a host of other tools is "vxUtil", which is freeware. I'd give you a URL for downloading it, but I'm on my iMate now (sipping coffee by the Yarra in a Melbourne Cafe - oh what a techno-wanker am I!), but search these forums or Google it and you'll find it.
Now, regarding the proxy thing... These PPCs are a little tricky with their internet settings, and I had to create a different 'connect using...' connection profile, if that makes sense. The important setting within the profile, which is under the Proxy tab, from memory, is "This network connects to the internet".
Now for some reason, if you don't enter in a proxy server here, that check-box doesn't stay checked when you ok your way out. So what I've had to do is go into the advanced area & enter anything in the "wap" proxy, then ok out.
Strange, but it seems to work. Although I always leave my "Private network" on "My Work Network", I can now browse the 'Net through the WiFi AP/Router.
Download vxUtil & see if you can ping your AP, then go from there.
I've worked around the problem by using static IP address instead of depending on DHCP. Thanks to Hitchhiker software. I noticed that it was trying to obtain IP address from DHCP but failed. (The very same DHCP work wells for the rest of my network). Anyway, I will use Hitchhiker to switch IP back and forth if necessary.
Thanks a lot!
MDD
Great to hear you found the problem - well done.
I've just purchased my O2 Xda IIs and am wondering if there is a way to do this:
IE seems to be one of the programs that automatically connect to Internet using the first default in Network Management.
Is there a way to force it to use the network connection of my choice?
Here's my problem?
When I'm in field, I want to use Optus GPRS Internet settings. (This is slow and doesn't work well in office due to poor reception.)
When I'm in the office, I want to automatically use My Work Network which is wireless.
In order to force IE to use My Work Network, when indoors I must manually change settings in Settings/Connections/Connections/Advanced/Select Networks
This is time consuming and something you sometimes forget to do when moving from field to office quickly.
Thanks!
Marvin
When I turn on Wifi, it automatically changes my selection from MTCTouch WAP (my WAP provider) to My ISP, which works because I use a default gateway and not a proxy server.
Anyway, I'd love to be able to make it automatically select a network of my choice, or even switch IP address depending on which Wifi network I'm connected to. Does anyone know of this?
Hey everyone.
I'm having trouble finding where the wifi adapter settings are on the stock T-Mobile ROM for the Touch Pro 2.
Normally you go to Settings --> Connection Tab --> Configure Wireless Adapter settings, but it's not there. If I pick Wi Fi and click on Advanced, it gives me a bunch of technical info, but nothing is editable.
I used to be able to do this on the custom ROMs for the T-Mobile Wing - right now the Touch Pro 2 is getting an IP address via DHCP, but I don't want to do that as I want to specify a static address for the Touch Pro 2 when I flip on the Wi Fi.
Any help would be appreciated. Thanks!
Anyone know?
Again I have a workaround by using static DHCP on my router, but I'd like to know how to do this in WinMo. I get a feeling I'm just looking in the wrong places.
When you click advanced setting and the Wireless LAN window appears click change network and that should put you into the Configure Wireless Networks screen.
Or go to Start->Settings->Connections Tab->Wi-Fi->Wireless Networks->Network Adapter->Click the Broadcom 802.11 DHD Network Adapter->Use Specific IP address and type it in!
Thanks Kloc. You solved my issue too.
In case anyone runs into this, my original issue was posted here:
http://forum.xda-developers.com/showthread.php?t=555068
It turns out that if you are using a static-IP setup, you need to pre-configure the Touch pro 2 with those settings before it connects to the Linksys Router with DD-WRT firmware. Unlike a laptop that will connect and say "limited connectivity" until you fill in the Static settings, the Touch Pro 2 will continually tell you the connection failed. So anyone that is using Static settings with DD-WRT firmware on a Linksys router, be sure to use Kloc's walk through before trying to connect to your router.
Thanks again Kloc.