hi - i have downloaded the XDA-developers-SER-v12.exe from jeff summers post at http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe when i run the program it says that it cannot find the ROM image to upgrade your pocket pc please download and try again. i think my question is - how do i make the download from jeff see the rom image i have to enable it to make the modifications and then install it to my device....... many thanks in anticipation of some assistance. :?
Have you looked at the file size? I would try downloading it again, it maybe you have a corrupt or partial file.
hi thanks for your reply - i have now checked the file size - the download is 15.4 meg and the file i have is also 15.4 meg .... i will however download the file again just to eliminate the corrupt file issue and will post to this thread the results of trying to run the newly downloaded version. thanks for your reply.
i have done as i said but i still get the same error message.... 007 cant find the rom image ... can you or anyone tell me the procedure for using this developers program as per the above link from jeff... i need to know where to place the rom image so that the program can find and adjust it.
Just to check whether it's the file contents and not something else, change the file name to .zip and use Winzip to check the file. You should find a directory named \english that has a file named NK.nbf with a size of 32 MB
In that case if you have SD card and reader/writer, just move this file to the SD card and use the bootloader (power button + soft reset) to flash your XDA.
Hi thanks for your reply – I have done as you asked and yes the file does exist….. the only card reader writer I have is the xda its self via activsync – will this be suitable ?? – I have read lots of info of this site and wondered do I run the risk of destroying my xda by being of limited ability and not using a “.exe” self installing method. ?
Hi ...
If you can extract the NK.nbf file, then you can use the XDAtools from this site. Use the OSImage tool to copy the file contents to your XDA flash ROM. I would recommend taking a backup first using the same tool but with the opposit source/destination.
If you still get the error message then you are stuck to the SD card method. Up to my info (didn't try it tho), copying the file through the XDA will not work as the card will be formated during the the copying, you must use a PC reader\writer for this.
You better be very careful as YES there is always possibility to turn your XDA into a very expensive paper weight!! ... but by following the instructions it will go very smoothly.
Good luck ...
thanks i will give it my best shot and return here with the results....and possibly an expensive paper weight
many thanks.
This is a long shot, but there was a cab file knocking around the forums, I remember it from the days when i had a HTC Blue Angel. there was a cab file or file that was installed on the SD card that could take a ROM image from the device and then you could install back onto a device if the upgrade failed.
Im just wondering if this is possible and it would help those people out who have bricked there devices.
What im saying is, if i can find this cab file, i could try and get my rom dumped and maybe someone could use this to get an original o2 uk rom back onto there devices.
what do you guys think ?
joey jojo said:
This is a long shot, but there was a cab file knocking around the forums, I remember it from the days when i had a HTC Blue Angel. there was a cab file or file that was installed on the SD card that could take a ROM image from the device and then you could install back onto a device if the upgrade failed.
Im just wondering if this is possible and it would help those people out who have bricked there devices.
What im saying is, if i can find this cab file, i could try and get my rom dumped and maybe someone could use this to get an original o2 uk rom back onto there devices.
what do you guys think ?
Click to expand...
Click to collapse
this would be great if you would manage.. would save my orbit!!!!!
please let me know how you get on!...
joey jojo said:
This is a long shot, but there was a cab file knocking around the forums, I remember it from the days when i had a HTC Blue Angel. there was a cab file or file that was installed on the SD card that could take a ROM image from the device and then you could install back onto a device if the upgrade failed.
Im just wondering if this is possible and it would help those people out who have bricked there devices.
What im saying is, if i can find this cab file, i could try and get my rom dumped and maybe someone could use this to get an original o2 uk rom back onto there devices.
what do you guys think ?
Click to expand...
Click to collapse
hey joey jo jo... done some searches on this and came up with this link.. don't know if it's what you're thinking of - the instructions aren't for the artemis - but maybe a start?
http://www.modaco.com/Backup_your_Typhoon_ROM-t201334.html
i found this on the Hermes wiki
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
not sure if this is anything that will/can work, im going to have a look but im still trying to locate that cab file that i used on my years old xda 2s/ Blue angel.
i hope it does work for all you people that have paper weights
any comments from the guru's ??
Try this post http://forum.xda-developers.com/showthread.php?t=279446&page=3 talk about 3 programs...
Pocha said:
Try this post http://forum.xda-developers.com/showthread.php?t=279446&page=3 talk about 3 programs...
Click to expand...
Click to collapse
interesting,
ill look at this, cheers.
i only have a 256 mb card and i need someone to let me know if that is big enough for a rom dump....... any one help with this?
seemed ok, just backing rom up now.... will try and put it into a format that can be uploaded, mine is the original rom that came with the o2 uk xda orbit, and will/should help bricked devices back to original rom.
im, currently uploading my dump to the ftp, for anyone who knows how to convert this into something flashable.
i have no idea how to do this, so if anyone knows, please do this or pm me with instructions or link and ill do it tomorrow after work.
What program you use to make the dump? I used WM5 test, and I could make a copy of active ROM, but where this progam saves the files? I can't find any folder with these copied files.
Pocha said:
What program you use to make the dump? I used WM5 test, and I could make a copy of active ROM, but where this progam saves the files? I can't find any folder with these copied files.
Click to expand...
Click to collapse
i used grab_it.exe from your prev link mate, i now have an image of the rom, but now need to work out how to turn it into something we can upgrade from.
http://forum.xda-developers.com/showthread.php?t=238945
In which form grab_it dump ROM file?, I could only used WM5test and this program copy file per file, doesn't create nb or nbh file or something like that...
all it created for me was dump.bin i have no idea what to do with it, but im searching the forums for help.......
joey jojo said:
all it created for me was dump.bin i have no idea what to do with it, but im searching the forums for help.......
Click to expand...
Click to collapse
hey... i found this..
http://forum.xda-developers.com/archive/index.php/t-256380.html
hope it helps!
joey jojo said:
all it created for me was dump.bin i have no idea what to do with it, but im searching the forums for help.......
Click to expand...
Click to collapse
hope this helps too..
http://buzzdev.net/index.php?option=com_content&task=view&id=65&Itemid=1
i'm totally new to this but maybe if you use the htc wm5 rom as a base and then decode that to put your image on top, then encode, it will work?
see for nbh format of decoded roms..http://forum.xda-developers.com/showthread.php?t=289830
chickyd said:
hey... i found this..
http://forum.xda-developers.com/archive/index.php/t-256380.html
hope it helps!
Click to expand...
Click to collapse
on that link, there is a coment,
Please use the SEARCH button as this has been discussed already.
ANyway to help you do the following:
1. Download the latest T-Mobile ROM (the exe file) from the XDA Dev FTP site. Then extract this to a folder, say EXPERIMENT
2. Put the BIN file there
3. Go to Buzzdev.net nad follow the procedure to ENCODE/DECODE ROM. This will change the original nk.nbf (the OS) with your BIN file. using HTC64 Extended ROM Tool.exe
4. Then just put the MaUpgradeUt_noID.exe file into this directory also.
Now you have your OS backed up ready to install to a device in the EXPERIMENT directory. Now just make sure the T-Mobile ROM you downloaded has the same radio ROM. If not, download a verison with same radio rom and replace the radio_.nbf file with the downloaded version.
Backing up the ExtendedROm has to be done manually. Just transfer all contents to a alternate directory in the PC then just put it back to replace what's already there.
Hope this helps
Click to expand...
Click to collapse
i think this will only work with an original o2 rom, which isnt available, and i doubt it would work using another operator rom , will give it a go though.
joey jojo said:
on that link, there is a coment,
i think this will only work with an original o2 rom, which isnt available, and i doubt it would work using another operator rom , will give it a go though.
Click to expand...
Click to collapse
problem is also that the encode / decode is discussed re nbf compressed files... and the artemis uses the nbh format. this is what the second link was i posted.
looks tough!
chickyd said:
problem is also that the encode / decode is discussed re nbf compressed files... and the artemis uses the nbh format. this is what the second link was i posted.
looks tough!
Click to expand...
Click to collapse
it is tough, i have no experience in this, and i tried, ive pm'd a couple of people and awaiting some responses, but i cant see it happening in the sense that it may not be possible to do the upgrade while in bootloader..
but . . . . the mission continues
hi!
Currently there is no way to make a backup other than with pdocread.exe from itsme (istutils). You can make a backup of the OS, SPL, GSM and Extended ROM with it. The problem begins with flashing it back, I'm still trying to figure out how to do it when the phone is fully functional, there is no way to do it when you r phone is stuck in bootloader mode. The only way would be by reconstructing a .nbh file. The problem is that none of the tools that can make a .nbh file work for the Artemis, because the use a wrong signature size. The one who can help us out here is pof but he is a VERY busy man.
rvbcrs said:
hi!
Currently there is no way to make a backup other than with pdocread.exe from itsme (istutils). You can make a backup of the OS, SPL, GSM and Extended ROM with it. The problem begins with flashing it back, I'm still trying to figure out how to do it when the phone is fully functional, there is no way to do it when you r phone is stuck in bootloader mode. The only way would be by reconstructing a .nbh file. The problem is that none of the tools that can make a .nbh file work for the Artemis, because the use a wrong signature size. The one who can help us out here is pof but he is a VERY busy man.
Click to expand...
Click to collapse
Then how is possible that bepe could make a custom ROM for arthemis? I thought if you use nbhtool you can make custom ROM for arthemis, btw I posted a msg in original nbhtool post, about what parameters I need to introduce in order to make a fully operational ROM, because when I entered in bootloader mode, and using putty's tool to comunicate with PDA, my device return this msg:
cmd: getdevingo
ARTE10000 HTCE... (and in nbhtool, parameters are only ARTE1000 or ARTE1100)
Signature size when you decompresing a original NBH file is 128 (in original post some people talk about 1024, but when I cooked ROMs with 1024 I have an upgrade failure, and I must reboot PDA), but I really need to know if in nbhtool on Device I Must enter "ARTE10000" and in CID type "HTCE" or not...
I'm trying to reset a phone to the official rom (running MIUI now), and have been told to download this file:
PB99IMG_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed (.zip)
Told meg to rename it to PB99IMG.zip and place it on SD. The file was supposed to start by itself when starting the phone in HBOOT. But nothing happens.
What could be wrong? Please don't tell me to read another thread, I don't understand a word in these threads.
The phone belongs to a girl, and she's without a phone until this issue is solved. Some quick help would be great.
Solved, the zip was renamed to .zip.zip.
Hi,
since I am a new user I am not allowed to post in the original thread, hence my question here. I am total noob when it comes to Android. I am stuck on step 13 of the guide. How do I access the zip file on the sd card? My phone shows up as a drive but I can not see the contents of the sd card and therefore can not start .bat file.
Is that not the correct way to access the contents on the sd card, or did I do something wrong preparing the phone?
Thanks for the help!
Kind regards
Philipp
You've to start the .bat file from the installer file from your computer
Edit: For step 13 you need the Z1C installer.zip file. Unzip the file on your PC and run the install.bat
Thanks, I made it more clear! :good:
Thanks to both of you! I am going to try it out right nów. Should have thought of it, .bat is a Windows file.
Just out of curiosity; Does the .bat file unzip the files on the sd card, or why did I have to put them on there?
Kind regards
Philipp
edit: Never mind, I just saw that they were two different files!