Hi
I am running this ROM and I am looking for VGA drivers. Does this exist ? If yes can you please tell where I can find them ?
Thak you
The same question goes for 802.1g
PDA: T-Mobile MDA Pro
ROM version: 1.30.77 WWE
Rom date: 02/20/06
Radio Version: 1.09.00
Protocol Version: 42.42.P8
Ext Rom: ...blank !!! (nothing there)
Can you explain better?
What you mean with VGA drivers? do you want to change dpi resolution?
What is what you need?
orb3000 said:
Can you explain better?
What you mean with VGA drivers? do you want to change dpi resolution?
What is what you need?
Click to expand...
Click to collapse
Just trying to find the page that explains qvga vs vga I run into this I haven't had the time to read it I will do it tomorrow basically I understand that my PDA is 640x480 capable. I am not sure which resolution I am using so ...if the factory ROM doesn't run that I want to enable it.
How do I know if I have to ?
1000QA said:
Just trying to find the page that explains qvga vs vga I run into this I haven't had the time to read it I will do it tomorrow basically I understand that my PDA is 640x480 capable. I am not sure which resolution I am using so ...if the factory ROM doesn't run that I want to enable it.
How do I know if I have to ?
Click to expand...
Click to collapse
On that case read here: http://forum.xda-developers.com/showthread.php?t=327830
Good luck,
orb3000 said:
On that case read here: http://forum.xda-developers.com/showthread.php?t=327830
Good luck,
Click to expand...
Click to collapse
I have read the whole thread but there is only one question regarding RealVGA and WM5 and that has no answer. I installed the cabs and when I try to run RealVGA I get this message:
"The file realVGA cannot be opened Either it is not signed with a trusted certificate or one of its components cannot be found. You might need to reinstall or restore this file"
What should I do ?
I ended up installing everything from scratch, I am using Tomal the last distribution and I must admit it is a lot faster than the original one.
The GPS is OK (Holux 236) the PDA is syncing with my Vista 64 desktop ...everything looks perfect (the 16G card is seen although I have the feeling that it is due to psidoc_sdhc.cab which I installed later).
I have not tested the 802.1g connectivity and I am not sure if the RealVGA drivers are installed by default or I have to install them manually.
1000QA said:
I ended up installing everything from scratch, I am using Tomal the last distribution and I must admit it is a lot faster than the original one.
The GPS is OK (Holux 236) the PDA is syncing with my Vista 64 desktop ...everything looks perfect (the 16G card is seen although I have the feeling that it is due to psidoc_sdhc.cab which I installed later).
I have not tested the 802.1g connectivity and I am not sure if the RealVGA drivers are installed by default or I have to install them manually.
Click to expand...
Click to collapse
You have to install them manually
Related
I have a Blue Angel as mentioned in my signature and I have what I believe are all of the files needed to try and install WM2005 Build 14326.0.0.0 onto it.
Here are the WM2005 files I currently have:
HimaUpgradeUt - 512KB - 5/5/2004 4:54PM
nk.nbf - 32,769KB - 3/21/2005 9:08AM
And the following came from my existing ROM:
ms_.nbf - 16,833KB - 2/3/2005 7:45PM
radio_.nbf - 4,097KB - 2/3/2005 7:45PM
I also have a good copy of ActiveSync Beta 4.0.0 and have all of the instructions that were made in the main WM2005 post for installing on the Himalaya and I'm assuming it should be the same for the Blue Angel.
My device info currently reads:
Model No: PH20A2
Windows Mobile 2003 Second Edition Version 4.21.1088 Build 14132
ROM Version: 1.36.00 WWE
ROM Date: 01/13/05
Radio Version: HA00_140
Protocol Version: AA3.3.301
ExtROM Version: 1.36.110 WWE
Hardware Version: 0041
This is what it came with out of the box, I have not installed the updated ROM Audiovox released the day the phone was released because I have never had a single problem and some people who upgraded reported problems and that some files were a day older than the version that shipped in the original ROM.
-------------------
Now my 1st question, the newest updated ROM installer package from Audiovox which was released 3/4/2005, has a different version of the upgrade utility, it's called "HaUpgradeUt - 424KB - 12/23/2004". The package it was included in from Audiovox's website was called "HA_SPCS_13600_113_00140_6600". Which upgrade utility is the best to use or does it not matter?
Now my 2nd question, has anyone yet tried this on a Blue Angel? Is there anyone here who really knows thier stuff who is willing to help me if I get lost or screwed up so I can be the Blue Angel WM2005 test pig?
Thanks!
hi
i have a pda2k with 1.33 rom and radio rom 1.08 and my cooked rom
i tried the upgrade but got the device authentication error.. tried it with the explained patch and the other method in original wm2005 post.. the himupgrade starts the procedure and then stops after some time saying an error occured..
but you go ahead and try it..may be you will do something differently and will succeed..
note: i have tried the xda 2 SE rom and imate jam rom and almost tried the alpine rom on my pda2k.. there is nothing you cannot revert back from
just incase if you are curious what happened after the above roms..my device didnt boot.... no problem...just unplug the usb port of the cradle and run a wwe rom made for xda 2s or pda2k ...everything will work then!
good luck..
keep us posted!!!!
in the above post: i mean unplug usb then replug usb and then run the BAupgrade utility....
can you upload hte 1.36 rom you have??? does your device have wifi and camera???
thanks
zohaer21 said:
tried it with the explained patch and the other method in original wm2005 post.
Click to expand...
Click to collapse
Where is the post for this "explained patch method" you are referring to? Also I'm considering the post titled "Microsoft Windows Mobile Version 5.0 I can share" as the original WM2005 post so we are on the same page in our thinking on that one.
The ROM is a free download from Audiovox, I guess I could upload it though.
I'm assuming the BAupgrade utility is on this site for download?
My device does have the camera but no WiFi, it has EV-DO instead. It's a CDMA phone, not a GSM phone...
your running the Verizon EVDO version of the the BlueAngel a CDMS 1xrt yada yada device. Most new ROM images are made for GSM phones then latter altered to talk to CDMA modules. In this case I think ot only would you not have a "good" experience but would warn against it. Second BlueAngel devices have OEM driver for the slide out keyboard. You will most likely loose for sure its use with this new OS. This is why the only devices it is worrking on right now are non-hardwired keyboard devices. Also there seems to be a notable diff in the hardare implimentation between HTC based devices. What software might work with one may not at all or damage another. Sorry for the down news but I think unless you have a keyboardless device I would not recomend playing with it. Just my 2 cents.
What you can do though is grab some of the elements (image files) from the new OS in other threads here, and overwrite the files on your device. Kind of like adding crome package or racing stripes. still the same car, just feel new :wink:
Thanks for the input. I'm running the Sprint version, not the Verizon one, same difference though pretty much, lol. 2.5G Vs. 1xrt and both have EV-DO, and then of course the frequency of the Verizon digital and Sprints PCS, but yeah both CDMA
I really couldn't care less about the keyboard, I don't even use it, never really have. Honestly, I work for CompUSA and if this thing gets buggered up I'll just exchange it out. I'm going to do a full backup tonight, hard reset, dump the existing ROM and then start the process just for grins to see how it goes. As long as it's not dog slow, text messaging works and email along with voice functions I'll be happy as heck. It'll atleast be fun to screw with and then I can always go back later.
I'm still unclear on some things like the country code and stuff that was mentioned in the other posts. Once I know I have all the facts and all of the files I'll give it a try and post back here. I'm off Sunday, Monday, & Tuesday so I'll have 3 days straight to play. I have to say my only real concern is it working with the CDMA radio which hopefully it will since I have a good copy of the latest Radio ROM for it...
hi 92GTA
yeah were on the same page..
wm2005 i can share is the original post..and i think page 10 has the answer (im not entirely sure though the post has now 17 pages!!!)
@ 92GTA : can you share this 2k5 ROM ? can you upload to a ftp and give us a link
bad :
read properly : he WANTS to install WM2005 on his IIs.
Why should you people go around risking your devices like this?
It's like putting diesel in a petrol car..things will screw up...
The 2005 upgrade currently available is only meant for XDA II devices, not IIs or II mini...or whatever. Hardware differences will render your efforts rather futile save for a massive hack.. Sigh.
indecided said:
Why should you people go around risking your devices like this?
Click to expand...
Click to collapse
dude what the hell is indecided..its either undecided or indecisive
the latter being you :twisted:
already tried this guys, it doesn't work, the bootloader cannot read the CE image, nd therefore hinders the device useless, but i managed to flash back to 1.31 and all is working now.
Hi Guys,
Im here with the same question,,
Can we really upgrade XDA IIs to WM 2005... or anyone haas done it.
someone said we shouldnt do it,, can I ask why?
Thanking you for your time.
hmmm...
Has anyone found a way to get WM5 to work on a blue angel??
I am new to windows ce,
however i have written a disassembler for windows ce arm executables
(dunno if it is of any use for this?)
and i am not affraid to develop more
if there is anyone who has any idea how to go about making wm5 work
i'd be glad to help
(ps i have an imate pda2k)
Friends the help, at my friend phone the Blue Angel is necessary, necessary WM2005 on it can to help to send? Write on
[email protected]
ISQ 1366613
Bobi1 said:
Hi Guys,
Im here with the same question,,
Can we really upgrade XDA IIs to WM 2005... or anyone haas done it.
someone said we shouldnt do it,, can I ask why?
Thanking you for your time.
Click to expand...
Click to collapse
you can find all the upgrade information at the following thread:
http://forum.xda-developers.com/viewtopic.php?p=138733#138733
............... ??
92GTA said:
zohaer21 said:
tried it with the explained patch and the other method in original wm2005 post.
Click to expand...
Click to collapse
Where is the post for this "explained patch method" you are referring to? Also I'm considering the post titled "Microsoft Windows Mobile Version 5.0 I can share" as the original WM2005 post so we are on the same page in our thinking on that one.
The ROM is a free download from Audiovox, I guess I could upload it though.
I'm assuming the BAupgrade utility is on this site for download?
My device does have the camera but no WiFi, it has EV-DO instead. It's a CDMA phone, not a GSM phone...
Click to expand...
Click to collapse
Sign me up too, CMDA but my has 1x instead of EV-DO. I would be willing to try it.
Where on Audiovox is the 2005 rom?. All I've ever seen are the 2003se updates.
ftp://ftp.xda-developers.com/BLueAngel/XDAIIshangman
I put this on the BA upload FTP today, MDA could you have a look at it?
Here is what came in the description
Instructions for upgrading your ROM
to WM 5 Build 14343
At this point, there is 1 BlueAngel WM5 English Roms available: Version
5.1.1700 Build 14343
This is a BA GSM rom and will only work on PH20B / PH20B1 devices.
And it cant be made, fixed, edited or reworked to work on any other device
You need Windows XP and SP2 to make ActiveSync 4 work! SP2 is available free
of charge at any PC World computer superstore or direct from Microsoft.com
Flashing your device can turn it into a Paper Weight, this is your own risk
Flashing a Rom which is not from your carrier will void the warranty
The Partion Tool resets your Exteneded rom Password and you Will not be able to
lock you EXT Rom if you revert back to CE2003
I have not tried it out yet. The way I put it in there is in sort of a package form, the file rarsave has the original rar files in it and the folders are the unpacked versions.
Any comments or results would be grately apreciated.
Ok, I upgraded to this ROM, from what I can tell it is the most straight up almost factory version of WM5 I have seen, It is fast and solid.
The only thing missing is the Blackberry software, Enterprise or web. If anyone knows where to get that I would be a happy camper. Can you get this software in a CAB form?
When you click on IE for the first time it even says OEM version!!!
No branding at all.
are you sure this isn't the one which we have tried before?
Where did you get this rom ?
I think it is the first WM5 rom for BA, PDA2k_2k5.rar but I will see after reflash
There is no point to upgade to this rom i am right and this is the first one the same as this one
There are far better roms in the ftp than this one
xplode said:
Where did you get this rom ?
I think it is the first WM5 rom for BA PDA2k_2k5.rar but I will se after reflash
Click to expand...
Click to collapse
i would be waiting for your reply after the reflash .. how long more to go??
I'm currently only backing up my device.
Hang|man said:
...
When you click on IE for the first time it even says OEM version!!!
No branding at all.
Click to expand...
Click to collapse
There is no branding in every WM5 rom fo BA, because it is not distributed by an operator
xplode said:
Hang|man said:
...
When you click on IE for the first time it even says OEM version!!!
No branding at all.
Click to expand...
Click to collapse
There is no branding in every WM5 rom fo BA, because it is not distributed by an operator
Click to expand...
Click to collapse
even for my 2003SE, it doesn't have any branding because I bypass auto config ... so don't think it is such a big discovery.
Yep sorry must me the same one, I am still looking for the WM5 Blackberry connect instant mail that will work with this version...
have a look at the text in post nr 1 and the wiki text
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
Hello everyone.
I've found this site whilst i was looking for a Windows Mobile update for my Pocket PC.
First off all, i want to mention that i have a Wallaby PW10A1 ( The one in the attached picture seems is not this one, only similar ), i suppose since the seller in my country has changed the brand as it's own. It's running Windows Mobile 2002, which i don't like at all.
Do any of you guys can guide me
Where to find a ROM that'll work on my PPC? Whether WM2003 or WM5
List me what's to be done after getting ROM?
Can share other applications, if needed during this upgrade period?
Model Number: PW10A1
Processor: ARM SA1110
Speed: 206 Mhz
Current ROM: 3.20.03 ENG
Rom Date: 07/22/03
Radio Version: 3.25.00 ( What's this one? )
If there's anyone to help, i'ld be appreciated.
Thanks in advance.
[ http://pdaturk.com/aspx/haber_detay.asp?id=174 Other info about this... ( Turkish Page )]
http://www.romkitchen.de/
The thing is, i have selected selected and selected stuf till no place left.
Clicked create rom..
01:07:49 --> Creating ROM... Please be patient. Process may take some time.
Ever thought about supporting the kitchen?
Why not using the time required for cooking to donate to the kitchen? ;-)
Still waiting..
Where the hell is this rom?
Allright, i've downloaded and installed a customised ROM.
-----------------
ERROR: GetDeviceData - An existin connection has been closed forcefully by a remote server.
error getting devicedata
-----------------
and i'm getting an
-----------------
Cannot execute remote communication program. Please naje sure that the USB/Serial cable is properly connected.
-----------------
error. I've installed WM2003 Final 4.02.04 ENG QTEK at first. But due to using it for the first time, i've added some useless appz in the rom too. Now i've cleaned them but.. It's useless i can't update this time.
Any help?
BTW, i've downloaded NK.nb1 too instead of rom.exe... How will i use this?
Alright, active sync didn't work.
so i had to learn and use Flash Upgrading.
I've no problem at that area now, except
what are radio stack versions, i mean differences.
and which shoudl i install for mine? for a better one
I am interested in trying out these new WM6 roms. however, I was wondering if anyone knew if easysync pro will work with WM6.
Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.
bunique said:
Yes it works without any issues. I am using Easysync since 1.5 weeks on wm6.
Click to expand...
Click to collapse
Please - What version are you using?
What version of EasySynch Pro works with Windows Mobile 6?
I'm also interested in using EasySynch Pro to synch my WM6 Device? Bunique, what version of EasySynch Pro are you using?
mine is 4.2.5
Easysync pro works with wm6 since V4.2.2. U have to install to main memory.
trlopes1974 said:
Easysync pro works with wm6 since V4.2.2. U have to install to main memory.
Click to expand...
Click to collapse
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
zzoinks said:
I have v 4.2.4 and was unable to install it to my WM6 device. Are you sure about this? The system requirements for 4.2.4 list the following as supported:
Microsoft Pocket PC 2000 / 2002 / 2003 / Microsoft Windows Mobile 5.0 for Pocket PC devices (ActiveSync)
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!
ps. 4.2.5 is a fixpack
trlopes1974 said:
1.-I'm quite sure on this.
2.-I got-it under IBM internal site (i'm an IBMer)
3. 4.2.4 should work. just install-it into the main memory and u have do do something (i don't remember what) to allow restricted operation on the PDA, this is a reg-hack or something, search xda and u will find!
Click to expand...
Click to collapse
Thanks for your reply. I found an IBM article outlining 4.2.5 and support for WM6.
Perhaps it was a problem with allowing unsigned apps? I seem to recall a registry hack/cab available to fix that. enable_rapi?
It's a bit of a moot point now since I reverted back to a WM5 rom last night. Maybe I'll try reflashing a WM6 rom and see if i can get it going though a hack...unless of course you'd be willing to send me a copy of 4.2.5, for evaluation purposes.
Thanks!
-Brett.
sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.
trlopes1974 said:
sorry , can't do that.
Anyway, yes, , its is the unsigned apps problem.
Click to expand...
Click to collapse
First off, thanks for the reply. I hope this isn't in the wrong forum... I found this thread through a search and I was hoping it applied to me. I've got a Wizard (Cingular-branded 8125), but I am using WM6 & Easysync Pro.
I still can't get EasySync 4.2.4 to install. I get a series of errors when it's trying to install the cab:
First, "this program uses a file that is no longer supported please obtain an updated version of the program"
Then "unable to launch \windows\xcpcsyncsvr.exe: error 1411"
Finally, it says that it's installed, but it isn't. And Easysync on the PC reports that it can't connect.
Any ideas?
Thanks,
-Brett.
zzoinks said:
alanchia67: Where did you get 4.2.5? I don't see it listed on IBM's site.
Thanks,
-Brett.
Click to expand...
Click to collapse
I'm a IBMer too.
Hi,
I'm really looking for a WWE WM6.5 Naked Rom for the P3600 Trinity
Not interested in many apps or fancy menu's (I usually disable any menu pluggins such as QMenu etc.)
All I would like is:-
Plain Boot Loader Maybe with wording such as "P3600 - Trinity"
Calc
Calendar
SMS
FDC Soft Task Manager
RegEdit
CorePlayer (TCPMP)
QuickGPS
TomTom Navigator 7.450
Current System Setup:-
CE OS 5.2.21215 (Build 21215.5.0.0)
Processor - SC32442A-400Mhz
Rom Version: 3.00.707.18
Rom Date: 04/18/09
Radio version: 1.56.70.11
I use a company sim which doesn't allow data in anyway (no MMS / No 3G / No GSM) only through the USB / Wireless / Bluetooth.
The reason I ask is because the rom i'm using seems to have a memory leak, and needs daily rebooting.
I currently use the AthineOS on the TyTnII and quite like it.
I have tried many roms, and although they work reasonably well, I could do with something a little more "personalised"
Many Thanks,
Wayne.
Too scared to cook, not afraid to test and naturally cheeky!
Devices:-
WM 6.5-
HTC TyTn II
HTC Trinity P3600
WM 2003-
HP Ipaq 6340
HP Ipaq 6515 (Beetle)
HP HW2210
Trinity WWE / wm6.5 build 215725 Lite
Try the followed rom
Trinity WWE / wm6.5 build 215725 Lite
thai rom in english
its lite version
link
http://www.mediafire.com/download.php?2irgtzytjgc
just downloading now - thanks!
Just loaded the rom.
Looks quite nice.
seems very stable without any glitches
I will report back, but at the moment it seems stable and fast - even when i install TomTom7
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Hi, I'm gonna try it, and then I'll give my opinion.
Thanks.
Ricky
tudn said:
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Click to expand...
Click to collapse
Did You get install the ROM? Or it was when you were up dating it?
ricky chan said:
Did You get install the ROM? Or it was when you were up dating it?
Click to expand...
Click to collapse
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
tudn said:
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
Click to expand...
Click to collapse
i assume that you use an official rom or you have flashed official spl.
read this and this
Hi arnooo
I try this rom but camera don't work... you know how?