Develop Bugs

problems with diverts to voicemail & # of rings b4 diver

my mob no is: 07743889117
my voicemail no is: 01234567891 (suppose)
i ve tried searching around on the forum and found 1 thread where this topic was discussed, however it was quite confusing.
my o2 XDA IIs used to divert calls to my voicemail only after 15 seconds, however i wanted to change this to 30 seconds and then came across a thread on the forum here.
i used a long command starting with: **61*077453889117....
(i ve forgotten the last few sequences of the command)
so neways, it did the trick, the timer was delayed to 30seconds, however here is the PROBLEM: when sum1 calls, it rings for 30seconds, and then it says: "ur call z being trasferred....ur call being transferred, THE NUMBER YOU HAVE CALLED IS NOT RECOGNISED"
any1 knows how 2 fix my problem n get the diverts to my voicemail up n running again?
if you are going to write the commands, can u plz use my above given numbers so that i know exactly what to do.
many thx

any1 at all?

Hi SenzAsian
I have had mixed success with using the codes. Don't have it to hand right now, but will try and find tonight. But a better plan is to just call tech support. They can just change it on the server side for you. I think 40 seconds is the max... Have you tried that?
Regards
Chris

If you do a search on Google for "gsm codes" then several pages are returned. Try one or more of these for advice if the command I give below is no good.
If you have an O2 XDA IIs I am assuming you are on the O2 UK network. The number after the **61* bit should be the number of the O2 voicemail service. Therefore, the command for a 30sec delay to divert to voicemail after not answering your phone is:
**61*+447802091901*30#
Then press the GREEN send button.
Hope this helps.

hey guys, thank u very much for ur input!
mvsmith, thx man, it worked! however, ur command was missing a * towards the end, so let me write down the proper command in case other users need to set their delay times:
Steps:
1. find ur voicemail number (not ur mob number)!
2. so suppose ur voicemail no is: +447743888888, then
3. on the xda fone scree, type in: **61*447743888888**30#
(the **30# at the end will set it to a 30seconds delay b4 it goes to ur voicemail)
4. click send/talk
5. wait for a few seconds
6. DONE!

BlackList for HTC Touch HD - Please Help

Hello guy`s i need some help.
So im looking for some good Caller BlackList app that will work perfect on my HTC Touch HD
I was searching on the net and i already try few like MagiCall, Steelsoft Blaclist and etc they don`t work fine for me on the Blackstone and when i add some phone number to the Blacklist nothing heppand the number is able to call me anytime.
I need advice from peoples who know witch program i need!
Im looking for some good Blacklist Caller to be simple easy to use with no alot extras just when i put some number on the blacklist he to be really on theblacklist till i don`t move it from there!
And when this number try to call me always to give a busy signal or my phone is turned off something like this!
Thanks in advance
P.S I try befor few minutes the app that i found here called CallFirewall 1.4 and again the same im adding numbers to the BlackList and they are able to call me without a problem so this app don`t work for me too Please HELP

You must not close the apps after adding a a number... You MUST hide them... They must be always enabled to reject calls, otherwise apps dont work...
I use magicall and it works perfect...

I'm using No Calls.
A finger friendly call-blocking software which works great on the HD.

GoldCoin said:
I'm using No Calls.
A finger friendly call-blocking software which works great on the HD.
Click to expand...
Click to collapse
Me too, works fine and allows the creation of profiles and blocking calls without caller id (a must).

NoCalls seems great but one thing i couldn't do on it was block specific numbers without having the numbers in the contact list, any idea how or a program that can do that.

Thank you for the advise i already download No Calls v 1.0 and use it the problem i had is the program really work and block the selected contacts but didn`t block them immideately what i mean when this contact try to call me for few second he recive a free signal and after this the phone ignoring him and looks like someone calling me and i press the red button! so the question is here i need a smart fast software that for example if you are addet to my blacklist you to recive busy signal from the begining or something like this
because not have any point 1st to be free signal and after that busy i can do the same without to use any program just i need to press the red button!
I hope to understand me and give me some advice why this heppand and why the program don`t work fast
Thanks

I Found desigion so now i try again SteelSoft BlackList v 4.21 and it work perfect for me block the calls immidiately so the point is this that yesterday i install the app in my Storage Card and afer this she don`t wana block any calls etc.. today befor few minutes install the same app in my Phone memory and the program work like a charm!
So for peoples who have the same problem like me they can use this app and all will be fine!
When the banned contact or number try to call you will recive few second`s busy signal and will be ignored very fast nobody can suspect that you put him in the blacklist!
Perfect

I use Magicall on my HD. No problems at all. It's a great SMS/Call filter.

Hey guys i just recently purchase the HTC TOUCH PRO and im trying to figure out where and how to get the no call program. Thanks.

how are you? so what you are saying is that as soon as the person calls they received a busy signal and then their phone will receive whatever txt your phone is defaulted to send them. And also does their number come up at all?

+1 For Magicall (SMS, no signal, password, drop log, ....)
but not free

+1 for MagiCall, works fine for me on Dutty Holy Grail R0 ROM as well as on Stock one.

Mod edit: Post removed warez is against forum rules.

No Call is a fine-working app.

PLEASE the MOD to move this Thread to the Trash, the Thread is OLD and not actual.

All incoming calls are unknown

Hi, after upgrading my Rhodium to http://www.htc.com/uk/SupportViewNews.aspx?dl_id=629&news_id=219 all incoming calls are unknown, even the ones the have Called ID disabled. I have checked many of my contacts and they all say they do not have it blocked.
Bit lost here. Any ideas?

Had the same problem on my TP2.
After some randomly trying, i figured out how to solve it, it's pretty easy (at least for me...)
I just had to change all my phonenumbers starting with a 0 to +49 (Germany in my case, so you have to change it to your country then...)
For example:
0151xxxxxxxxxx
to
+49151xxxxxxxxxx
That does the trick, and there should be no more unknown callers
Hopefully helped you out

I had a similar problem
http://forum.xda-developers.com/showthread.php?t=548420
My TP2 would recognise my contacts if I wanted to send a sms / make a call but nothing incoming.
The solution I found that worked for me was to go to each contact - edit - do nothing - done.
After that it now works fine, although going through over 300 contacts like that almost sent me insane
I'd try on one first before going to all that effort

I once had the problem with contacts being saved wrongly. I used to have all contacts as:
+31..... (europe - the netherlands ... phone number)
but I had to change that into:
0031....
For some reason the + wasn't recognized well.

Oh my god...1000 contacts or so, all +31 :-( Stupid HTC
Thanks guys ...

Before you start editing hundreds of numbers:
http://social.microsoft.com/Forums/...s/thread/747a9ca3-e27b-4b43-bef1-c1cf532ad692
I had to change to 6 numbers for the really short numbers.
Most of my numbers are informat +countrycode_operatorcode_phonenumber (without the underscorse, of course).

problem wid htc wildfire
all incoming calls on my htc wildfire are being shown as "unknown". even the saved contacts. i'm a mess...even tried restarting the phone but nothing works. please help(m from india)

[Q] Call Conferencing in WP7

Hi,
I am trying to do a call conferencing on my HTC Mozart and not able to do so.
The way I tried is as follows
Step1:
Called the first contact
Step2:
During the ongoing call, pressed the Down arrow key and then selected the option ‘Add call’ and called the second contact.
Step3:
Once both calls were active selected the Merge calls option.
The above step was supposed to bring a conference option at the top but I can only see the option to swap between both the calls (Putting one of the caller on hold)
Is there something I am missing here.
It would be really grateful for any of you to help me with this.
Thanks
Shamreez

Tried it myself yesterday, and did the same steps as you mention above.
That worked for me.
Also the steps on the Microsoft site seem to mention the same as you did.
http://www.microsoft.com/windowsphone/en-us/howto/wp7/start/use-my-phone-for-conference-calls.aspx
Can it be a operator specific issue?

bloodyairtimer said:
Tried it myself yesterday, and did the same steps as you mention above.
That worked for me.
Also the steps on the Microsoft site seem to mention the same as you did.
http://www.microsoft.com/windowsphone/en-us/howto/wp7/start/use-my-phone-for-conference-calls.aspx
Can it be a operator specific issue?
Click to expand...
Click to collapse
It was indeed an operator specific thing.
I called Orange and they told me that they had not added the call conferencing product on my account (Never knew that it had to be done like that)
Got it working now.
Can the mods close the thread please

Receiving sms after a missed call

so on my previous phones, when i was out of area service(no signal) and someone called during that, i received(after gain signal) a message with lost call and their phone number.
it is possible on wildfire?
thanks in advance

I dunno about doing that phone-wise, but my carrier has the option for me to receive those

gogusteliade said:
so on my previous phones, when i was out of area service(no signal) and someone called during that, i received(after gain signal) a message with lost call and their phone number.
it is possible on wildfire?
thanks in advance
Click to expand...
Click to collapse
I'm pretty sure that this is a service of your carrier, so you should be able to use it on any phone.

i had the same carrier on my previous phones, so i think it's wildfire here
if i remember correctly, on nokia 5800 was a setting in sms menu, but on wildfire i can't find it.

Check whether you are still subscribed to it. They send it as a normal SMS, so I am sure it should work on any phone. It's a paid service here (Obviously, it was free before) and you have to separately subscribe to it.

thanks, but I'm very sure that i haven't unsubscribed to this or any service since i got my wildfire or before that.

Call your service provider and badger them. (lol) Alternatively, if you are sure this is a Wildfire thing, use your own SIM card on another phone and check there whether it works.

That feature is called "MISSED CALL ALERTS" and in no way it is related to wildfire. And i don't see a point which says that it won't work on wildfire. It is just like receiving text message (lol).
It is entirely a service provider thing. Ask your service provider for MISSED CALL ALERTS (MCA).
And sometimes there will be network related issues so that MCA will be activated automatically without charging (happened to me once). And sometimes they will be automatically activated by deducting balance from our mobile and we being unaware of that. This was the worst thing i face with service providers, they activate the things automatically deducting balance (like caller tunes).
And can u tell the option present in nokia 5800 setting. IM ALMOST SURE THAT THIS OPTION IS NOT PRESENT IN MESSAGING APP. BUT, IF IM CORRECT U MUST HAVE SEEN IT IN "SIM TOOLKIT" APP WHICH IS A NETWORK RELATED THING AGAIN.
Check the "Sim Toolkit" (or some other name i don't know what ur carrier names it) app on wildfire and verify whether u see it there.