Develop Bugs

IGO8 and Htc HD/Blackstone

For the Correct settings for your HTC Touch HD use this below. Replace the text in your sys.txt file in iGO8.
For iGO in landscape use the below file.
Copy this file to your iGO8 Directory and replace the sys.txt file.
Thanks to domal for originally posting this.
For iGO in potrait use use the below file.
Thanks to Vbieyz for posting this.

Hi,
At moment without 800_480 skin, you can use only with 400_240 skin in landscape mode. My HD and igo work well with this setting

Thanks for your answer
Does someone know where whe can find 800_400 skin ?
thanks in advanced

Sry forgot sending the setting...
My sys.txt:
[folders]
;app="%SDCARD%/iGO8"
app="\Storage Card\Igo8"
[interface]
skin="ui_igo8"
resolution_dir="400_240"
maxzoom2d=6000000
show_exit=1
screen_x=800
screen_y=480
vga=1
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
driver="GDI"
[map]
2dheadup=1
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=1
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1

Jbs_Israel said:
Thanks for your answer
Does someone know where whe can find 800_400 skin ?
thanks in advanced
Click to expand...
Click to collapse
No such availably yet

nikkel said:
Sry forgot sending the setting...
My sys.txt:
[folders]
;app="%SDCARD%/iGO8"
app="\Storage Card\Igo8"
[interface]
skin="ui_igo8"
resolution_dir="400_240"
maxzoom2d=6000000
show_exit=1
screen_x=800
screen_y=480
vga=1
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
driver="GDI"
[map]
2dheadup=1
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[debug]
sound_q_length=200
queue_length=200
disable_outlookpoi=1
show_oneway=1
show_speed_limit=1
skip_eula=1
enable_roadshadow=1
Click to expand...
Click to collapse
can u explain what do i need to do with this info ?

Edit your sys.txt file and replace all with this

My HD work now fine with Igo8 and it is just beautiful

prospects said:
My HD work now fine with Igo8 and it is just beautiful
Click to expand...
Click to collapse
Does it work in landscape and in portrait mode ?
Which version of Igo8 do you Have ?
What about your sys.txt ?
Thanks

Can IGO 8 use TMC from the FM radio ?

gergy said:
Can IGO 8 use TMC from the FM radio ?
Click to expand...
Click to collapse
Peoples said yes, but i had no success yet ... I think it's depend for igo and map version

Jbs_Israel said:
Edit your sys.txt file and replace all with this
Click to expand...
Click to collapse
thats what i did - i copy & paste it to the sys but its not starting...
some advise ?

Check the data.zip file, have 400_240 folder?
Use this settings for sys.txt:
[folders]
app="%SDCARD%/iGO8"
[device]
sdcard_dsk_num=7
[interface]
skin="ui_igo8"
resolution_dir="400_240"
maxzoom2d=6000000
show_exit=1
screen_x=800
screen_y=480
vga=1
[rawdisplay]
highres=1
screen_x=800
screen_y=480
class="landscape"
driver="GDI"

Data For Wvga From Original Igo8 Toshiba G910
Jbs_Israel said:
Hi everybody,
I will have my Blackstone next week.
I want to use Igo 8 in landscape and portrait mode.
Which version do we need ?
How can we do for using it : do we have to modify the sys.txt and the data.zip ?
Thanks for your help
Click to expand...
Click to collapse
Ok

nikkel said:
Peoples said yes, but i had no success yet ... I think it's depend for igo and map version
Click to expand...
Click to collapse
How should this be possible? Its FM radio is not RDS capable!

Ported From Original Igo8 For Toshiba G910
Ok

Indeed it works pretty nicely! ...but only in LANDSCAPE mode - do you confirm?

pzucchel said:
Indeed it works pretty nicely! ...but only in LANDSCAPE mode - do you confirm?
Click to expand...
Click to collapse
At moment working in landscape mode only, because it hasn't correct portrait skin ... We have to wait to correct 800_480 skin ...

esackbauer said:
How should this be possible? Its FM radio is not RDS capable!
Click to expand...
Click to collapse
As i wrote i had no success , but read some of forums, people had success him HD with TMC access....I don't know it's true or not ... But I tryed only one IGO version, and as I wrote it's function depend of IGO and map version ....

I do think the Touch HD has RDS (like the other HTC devices with FM). This does not mean that it receives TMC or that iGo can read TMC info. Hence my question...

iGO v8 R3 Configuration for HTC Blackstone

Ok, Only you need to replace data.zip, branding.zip file and sys.txt
iGO will be run in 480*800 resulation, to putting device in landscape mode, change Orientation from:
Setting->Device->Set Screen Orientation
this configuration is working with following iGo versions for sure
...
Nav N Go iGO8 v8.3.2.93112 (Jun 8 2009)
Nav N Go iGO8 v8.3.2.97313 (Jul 3 2009) - official retail R3 PDA version (*)
Nav N Go iGO8 v8.3.4.102680 (Aug 13 2009)
Nav N Go iGO8 v8.3.4.117940 (Nov 3 2009)
Nav N Go iGO8 v8.3.2.124260 (Dec 16 2009) - official retail R3 PDA version (*)
Must Know about these two versions (v8.3.4.102680) / (v8.3.4.117940)
New features have been added to those releases such as Driver alerts:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It will only works with Navteq maps, also Dimka Skin and GJ Skin are supporting Driver alerts
sys.txt:
Code:
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
[device]
Type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
vga=0
[rawdisplay]
highres=0
autoconfig=1
driver="GX"
[sound]
ding=0
[config]
autoset2donmap=1
autoset3doncockpit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=95
Backlight_night=15
[poi]
enable_pois_before_080217=1
all credit goes to Tom creater of DIMKA Skin who prepared following files for us:
data.zip (With Supporting Driver Alert) Extract rar file and copy data.zip to iGO folder
Code:
http://netload.in/dateiQARgzbBSlU.htm
branding.zip (With Supporting Driver Alert) Extract rar file and copy branding.zip to iGO folder
Code:
http://netload.in/dateid9uf4eKoX7.htm
after replacing data.zip if you get this error:
then delete flowing lines from sys.txt:
Code:
[Project]
name = "igo8_pda"
and also these lines if present at [interface] section
Code:
skin = "ui_igo8"
skin = "ui_igo8_da"
For peace of mind Use sys.txt from this post
iGO8
├───content
│ ├───building
│ ├───histspeed
│ ├───dem
│ ├───lang
│ ├───map
│ ├───poi
│ ├───skin
│ ├───speedcam
│ └───voice
├───custom
├───defaults
├───font
├───license
└───save
*
if you are using PDA version use following data.zip and branding.zip
Extract rar file and copy data.zip to iGO folder
Code:
http://netload.in/dateiO7Qe9xtXOV.htm
Extract rar file and copy branding.zip to iGO folder
Code:
http://netload.in/dateiKlKhkS74AM.htm
also make sure you have this section in sys.txt
Code:
[project]
name="igo8_pda"

FAQ
Q: What shall I do if I update data.zip or even iGO.exe?
A: For the best result delete save directory before doing that take backup of your favourites
Q: Do I need to install iGO with each flash?
A: No if you already installed it on SD Card just make shortcut to iGO.exe
Q: I have a Touch Diamond 2, do I need to modify any thing?
A: exchange Type="ALIAS_TOUCH HD" with type="Touch Diamond II" on [device] section
Q: I dont have signspot on motorway
A: Add this line to sys.txt
Code:
[interface]
laneinfo_signpost_enabled=1
Q: I want to show histspeed data on the map what should I do?
A: First you must have histspeed data historical travel time and measured speed in your content folder and add these lines to sys.txt and oly works if you have iGO v8.3.4
Code:
[route.histspeed]
enabled=1
show=1
use_timeslice=1
Q: I did run iGO and get this message "Program application database cannot be found. Please insert original application SD card."
A: Check iGO path in sys.txt need to correct
Code:
[folders]
app="%SDCARD%/iGO8"
Q: Street names are too small for me
A: Add this line mapfontscale=180 to [interface] section you can increase the number as well
Q: How can I disable automatic view change on roundabouts
A: Add this lines to sys.txt
Code:
[roundaboutcam]
enabled=0
centery=20
Q: What is TTS and how can I add it to my iGO
A: TTS (Text To Speech) is the way that your iGO will talk to you and says exactly what you need to listen for better driving experience, basically it is advance voice for your iGO and it’s only works with PNA version. In the past it was impossible to run TTS under WM6.5 while Manila 2.5 running in background but not any more thanks to BigE
Add these lines to your sys.txt and make sure you have TTS package including with your iGO.
Code:
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
supress_trivial_left=1
supress_trivial_right=1
expected_engine_delay=1400

Want to use different skin?
2. GJ Skin
Please follow step by step:
1a. Download latest Skin: GJ 6.12.p_da_800x480
1b. Make new skin folder if it is not exist
iGO8
├───content
│└───skin
└
1c. copy GJ6.12.p_da_800x480.zip to above folder
1d. use sys.txt from first post
1e. Run iGO and from Settings->Menu->Skin choose GJ6.12.p_da_800x480

Want to use different skin?
1. DIMKA - TOMSOFT
Before you start:
TomSoft said:
Since version Dimka - TomSoft 1.1.25.2 can be used on versions of iGO8 v.8.3.4.xxx
If you own version 8.3.4.xxx and DATA.ZIP R2 can Dimka skin - TomSoft on this version to use.
It is necessary only in the ZIP file to rename the skin folder "ui_igo8" to "ui_igo8_da"
Click to expand...
Click to collapse
Please follow step by step:
1a. Download latest Skin: Dimka 1.1.26 (a) - TomSoft HD (800x480 and 480x800)
1b. Make new skin folder if it is not exist
iGO8
├───content
│└───skin
└
1c. copy dimka_hd.zip to above folder
1d. Make new font folder if it is not exist
iGO8
├───font
1e. Download Digi fonts Dimka and extract it to the font folder
1f. Replace you sys.txt with this one sys.txt Dimka Skin Version
1g. Run iGO and from Settings->Menu->Skin choose Dimka
1.1. Map Changer [optional]
this option is useful if you want to change map for example from TelaAtlas to NavTeq.
Please follow step by step:
1.1.a. Download Map Changer
1.1.b. Create new folder
iGO8
├───MapChanger
1.1.c. Extract map_changer_tom.zip to above folder
1.1.d. Organize your maps for example:
In the directory "map" I saved the maps from TelaAtlas
In the directory "map_nq" I kept the same map, but from the NavTeq
Function Map Changer them switch and I need not manually move or otherwise change.
It is possible to switch between the four manufacturers, or map between the four sets of different countries
iGO8
├───content
│└───map [TelaAtlas]
││└───map_nq [NavTeq]
││└───map_ot [Other]
││└───map_us [User]
└
1.1.e. Add these lines to sys.txt Dimka Skin Version
Code:
[switchmap]
changer="\Storage Card\iGO8\MapChanger\MapChanger.exe"
1=",map_ta,\Storage Card\iGO8,\Storage Card\iGO8,"
2=",map_nt,\Storage Card\iGO8,\Storage Card\iGO8,"
3=",map_ot,\Storage Card\iGO8,\Storage Card\iGO8,"
4=",map_us,\Storage Card\iGO8,\Storage Card\iGO8,"
Speciall thanks to tom$oft which this post is dedicated to his hard work
For more information please read Manual

thank you for yr contribution but there are at least two other threads. i sugest you'll post there.
http://forum.xda-developers.com/showthread.php?t=442122&highlight=igo8
http://forum.xda-developers.com/showthread.php?t=471693&highlight=igo8
i also want to warn you that warez and hacked version are strictly forbidden here.

KukurikU said:
thank you for yr contribution but there are at least two other threads. i sugest you'll post there.
http://forum.xda-developers.com/showthread.php?t=442122&highlight=igo8
http://forum.xda-developers.com/showthread.php?t=471693&highlight=igo8
i also want to warn you that warez and hacked version are strictly forbidden here.
Click to expand...
Click to collapse
they are so complex and confusing as well, that is way I decide to open new one, but if moderator is decided to merge this topic then no problem
and these files are not any wares or hacked version they are just configration.

MrKaon said:
they are so complex and confusing as well, that is way I decide to open new one, but if moderator is decided to merge this topic then no problem
and these files are not any wares or hacked version they are just configration.
Click to expand...
Click to collapse
WRONG! The data.zip and the branding.zip are under copyright by NavNGo! So you are spreading parts of the program which are not yours!
The only configuration file is the sys.txt!
Reported to Mods...

Cendaryn said:
WRONG! The data.zip and the branding.zip are under copyright by NavNGo! So you are spreading parts of the program which are not yours!
The only configuration file is the sys.txt!
Reported to Mods...
Click to expand...
Click to collapse
WRONG as well
Supported Screen Resolution for official version:
320x240 or 240x320, 240x240 or 320x320, VGA (640x480), 240x400, 400x240
more info:
Code:
http://www.navngo.com/pages/global/eng/igo_8_description
for getting 480*800 resolution you need make change manually inside sys.txt, branding.zip, data.zip. (Just changing sys.txt is not enough) That is why I am providing these files, it is like tweaking iGO
if you are right then no one here must provide information for changing manila files

MrKaon said:
WRONG as well
for getting 480*800 resolution you need make change manually inside sys.txt branding.zip, data.zip. (Just changing sys.txt is not enough). That is why I am providing these files, it is like tweaking iGO
if you are right then no one here must provide information for changing manila files
Click to expand...
Click to collapse
WRONG!!!
If you had bought the product and upgraded through the correct web site, the info is already included in the data & branding files for that version. You dont have to change anything in the sys.txt file to get landscape or portrait working in high res.
In fact your sys.txt file is wrong. You are telling it that the screen is 800 x 480 and yet you have told it it is VGA when infact the HD screen is WVGA!
Also, the above versions allow you to set up the screen orientation without modifiying the sys.txt file or (the latest version) you can set it to device and if you are using a screen rotation app, if manilla rotates, iGO8 will automatically open to that mode.

Shetlander said:
WRONG!!!
If you had bought the product and upgraded through the correct web site, the info is already included in the data & branding files for that version. You dont have to change anything in the sys.txt file to get landscape or portrait working in high res.
Click to expand...
Click to collapse
if you dont need make any change in sys.txt so could you please tell me what these two topics doing here:
http://forum.xda-developers.com/showthread.php?t=442122&highlight=igo8
http://forum.xda-developers.com/showthread.php?t=471693&highlight=igo8
Shetlander said:
In fact your sys.txt file is wrong. You are telling it that the screen is 800 x 480 and yet you have told it it is VGA when infact the HD screen is WVGA!
Click to expand...
Click to collapse
Shetlander said:
Also, the above versions allow you to set up the screen orientation without modifiying the sys.txt file or (the latest version) you can set it to device and if you are using a screen rotation app, if manilla rotates, iGO8 will automatically open to that mode.
Click to expand...
Click to collapse
my point is resolution not orientation

Those 2 topics exist because at the time of the HD release, iGO8 didnt support the resolution 0f 480 x 800 in any of the data or branding files. It is only in the 2 latest versions that the proper files exist. The very latest version has support for the HD officially but the version before didnt (I cant remember off hand which file it is but one of them lists all the supported devices in alphabetical order).
As regards the VGA . VGA is 480 x 640 which is the resolution of the Diamond which was supported. If you look in your sys.txt file you have "vga=1". It should be vga=0 because it isnt a 480 x 640 screen is it.
If you are using the latest exe, data & branding files try this in your sys.txt file and try it.
[interface]
vga=0
[rawdisplay]
highres=0
driver=gx
and remove these lines -
screen_x=800
screen_y=480
class="landscape
screen_x=800
screen_y=480

Shetlander said:
Those 2 topics exist because at the time of the HD release, iGO8 didnt support the resolution 0f 480 x 800 in any of the data or branding files. It is only in the 2 latest versions that the proper files exist. The very latest version has support for the HD officially but the version before didnt (I cant remember off hand which file it is but one of them lists all the supported devices in alphabetical order).
As regards the VGA . VGA is 480 x 640 which is the resolution of the Diamond which was supported. If you look in your sys.txt file you have "vga=1". It should be vga=0 because it isnt a 480 x 640 screen is it.
If you are using the latest exe, data & branding files try this in your sys.txt file and try it.
[interface]
vga=0
[rawdisplay]
highres=0
driver=gx
and remove these lines -
screen_x=800
screen_y=480
class="landscape
screen_x=800
screen_y=480
Click to expand...
Click to collapse
I did what you are asking to do but it didn't run under right resulation, mine is working in perfect order, but could you please post your sys.txt

My sys.txt looks like this -
[device]
Type=Alias_touch_HD
[Interface]
maxzoom2d=600000
show_exit=1
shutdown_time=0
vga=0
[rawdisplay]
highres=0
autoconfig=1
driver="gx"
[sound]
ding=0
Those are the first 4 catergories after the program location.

I'm gonna chime in here, to say that Igo8 does support HD resolution.
I'm running the latest (10thMarch) Igo8 and dont need any of that sys.txt resolution tweaking malarky that was needed for the earlier versions.
With the correct exe, data, and branding files, Igo8 will run perfectly on the HD with no sys modification at all. In full resolution, not stretched or distorted
I should imagine these files are copyright/protected etc..by NavNGo, which is why I havent linked or posted them here.
The sys.txt is for tweaking Igo with personal settings...each to their own..
Mine:
[folders]
app="%SDCARD%/iGO8"
[interface]
show_zoombar=1
minzoom2D=40
maxzoom2d=6000000
show_exit=1
mapfontscale=160
[navigation]
sim_speed_factor=2
[debug]
skip_eula=1
enable_roadshadow=1
fov=40
show_oneway_3d=1 ; 3d arrows in one way streets
supress_trivial_left=1
supress_trivial_right=1
cache=2048
show_speed_limit=1
[map]
2dheadup=1
3d_max_tiltlevel=8250
3d_scale_carmodel=1
3dcarsizemin=2500
3dcarsizemax=5000
3dcarsizemul=15000
3d_max_zoomlevel = 500
fake2d_max_zoomlevel = 3000
3d_zfar_horizon_ratio = 200
roadblockicon_maxzoom = 2000
3d_max_zfar = 500
max_poly_segments_shown_1=400 ;makes map drawing a lot faster
min_poly_segments_shown_1=200 ;makes map drawing a lot faster
[poi]
enable_pois_before_080217=1
[sound]
ding=0
use_os_volume=1
queue_length=200
[roundaboutcam]
enabled=0
centery=50
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
Mick

Heres my complete sys.txt file -
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
[device]
Type="ALIAS_TOUCH HD"
[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
vga=0
[rawdisplay]
highres=0
autoconfig=1
driver="GX"
[sound]
ding=0
[config]
autoset2donmap=1
autoset3doncockpit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=95
Backlight_night=15
[poi]
enable_pois_before_080217=1

thanks
portrait mode sys.txt ???

Are there two?
Is there a difference?

lewent said:
thanks
portrait mode sys.txt ???
Click to expand...
Click to collapse
You dont need to set anything in the sys.txt for portrait mode. Go into settings and set the orientation to device and thats it. You will have to make sure manilla rotates for this to work properly though. I havnt managed to get it to auto rotate any other way.

Shetlander said:
Heres my complete sys.txt file -
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
[device]
Type="ALIAS_TOUCH HD"
[interface]
maxzoom2d=6000000
show_exit=1
shutdown_time=0
vga=0
[rawdisplay]
highres=0
autoconfig=1
driver="GX"
[sound]
ding=0
[config]
autoset2donmap=1
autoset3doncockpit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=95
Backlight_night=15
[poi]
enable_pois_before_080217=1
Click to expand...
Click to collapse
thanks alot I did update first post

No problem, glad I could help.
My sys file is a work in progress as Im always looking to tweak it. Im currently trying to shut up the "route recalculation" voice but as yet have been unable to do it. I know if I edit the ini file of the TTS voice file I use it will stop but I would prefer to find the correct entry for the sys file.

How do you install/configure igo8 for the HD?

I just downloaded igo 8 but I dont how to set it up for my touch hd (blackstone) can anyone help please.
Best regards,
Billy

What problems are you having ?

Add this text to sys.txt file...
[project]
name="igo8_pda"
[device]
sdcard_dsk_num=7
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
show_gps_config=1
no_gps_lost_warning=1
no_gps_disconnected_warning=1
popup_info=1
show_exit=1
skin="ui_igo8"
resolution_dir="480_800"
screen_x=480
screen_y=800
vga=1
[debug]
hide_win_taskbar=1
skip_eula=1
loop_sim=1
no_extrapolation=0
show_pedestrian=1
disable_outlookpoi=1
show_oneway=1
show_oneway_3d=1
show_arrows_on_route=1
[3d]
max_poly_segments_shown_1=400
min_poly_segments_shown_1=200
show_guidance_arrows =1
guidancearrow_zoomfactor=0.2
guidancearrow_width=0.6
guidancearrow_thickness=0.3
guidancearrow_first_size=1
guidancearrow_first_alpha=25
guidancearrow_contour=10
show_guidance_strip=0
guidancestrip_stretch=20
guidancestrip_width=0.3
guidancestrip_thickness=0.07
[rawdisplay]
gx_force_using_dll=1
driver="GX"
;driver="GDI"
highres=0
screen_x=480
screen_y=800
class="portrait"
[navigation]
show_current_city=0
[tripcomputer]
num_of_trips=4
[mydata]
max_favorites=20
empty_favorites=1
num_favicons=10
max_history=40
[map]
inertia_on_map_move=0
2dheadup=1
3d_scale_carmodel=1
3dcarsizemin=3800
3dcarsizemax=5800
3dcarsizemul=10000
[smartzoom]
auto_follow_time=10
overview=0
auto_follow_on=1
restore_smartzoom_on=1
minzoom=40
maxzoom=60
minangle=0
maxangle=90
zoom_after_find=1
enabled=1
minzoom2d=0
maxzoom2d=31
autozoom_coord=700
default_visibility_altitude=4000
autozoom_address=600
autozoom_cos=700
auto_smartzoom_time=8
[msnd]
msnd.start =0
[sound]
ding=0

what exactly is all that code for??? I downloaded Igo8 for my Tilt and thers no .exe file or setup file any wheres.

You must run AUTORUN.exe located in "2577" folder to install iGO 8. When you install iGO, exe file is located in Program Files -> iGO 8. Inside iGO folder, you will be find "sys.txt". Open it in txt editor on your computer and paste this iGO commands to it. Replace your sys.txt with it and start iGO.
If you don`t any map on MAPS folder iGO will dont be start properly.
application.dat is iGO8.exe file. Just reneme it and start iGO8 without install.

FileFixer said:
You must run AUTORUN.exe located in "2577" folder to install iGO 8. When you install iGO, exe file is located in Program Files -> iGO 8. Inside iGO folder, you will be find "sys.txt". Open it in txt editor on your computer and paste this iGO commands to it. Replace your sys.txt with it and start iGO.
If you don`t any map on MAPS folder iGO will dont be start properly.
application.dat is iGO8.exe file. Just reneme it and start iGO8 without install.
Click to expand...
Click to collapse
Best HowTo ever
Za 10

FileFixer said:
You must run AUTORUN.exe located in "2577" folder to install iGO 8. When you install iGO, exe file is located in Program Files -> iGO 8. Inside iGO folder, you will be find "sys.txt". Open it in txt editor on your computer and paste this iGO commands to it. Replace your sys.txt with it and start iGO.
If you don`t any map on MAPS folder iGO will dont be start properly.
application.dat is iGO8.exe file. Just reneme it and start iGO8 without install.
Click to expand...
Click to collapse
I did the same thing as you sad.But still having "Program application database cannot be found.Please insert original application SD card" I'm try'ing to use IGO 8.3.2 67483 which i found it perfect on my Diamond.But its not working on blackstone.The other IGO iGO 8.3.2.83157 and iGO 8.3.2 93112 are working but not this one.What should I do?
Oh sorry about this I thought that i should only change sys text in device program files.I also should change it in the storage card IGO folder this time no message as i sad before.But this time it says in advanced mode "Failed to open file :ico_findplace.bmp exiting application".Thinking that i wont able to use it.

I'm getting the "480_800\loading.bmp'' error.
What I did:
Copy IGO8 & 2577 folder to SD, install, replace the branding.zip and some other thing.zip files in the igo8 folder then edit the sys.txt...
Any help?

It means you don't have the resolution for it. Open up the data.zip in the igo folder and look up to see if 480x800 (or 800x480) is included in the folders. If it's not, then that's your problem. You'll need a data.zip file that supports that resolution.

Branding.ZIP\ui_igo8\480_800\loading.bmp is right branch for locate this *.bmp file. You don`t have correct Branding.zip file.
Unpack this ZIP file and see what is inside this.

FileFixer said:
Branding.ZIP\ui_igo8\480_800\loading.bmp is right branch for locate this *.bmp file. You don`t have correct Branding.zip file.
Unpack this ZIP file and see what is inside this.
Click to expand...
Click to collapse
I unpacked it, and it does contain 480_800's ui etc and also 800_480's stuff.
Could you maybe upload yours?

your sys.txt ...
well - what you have is in the interfacesection vga=1. Therfore it cheks for the startupbitmap in the vga folder ...
you should chage your sys.txt:
[interface]
vga=1
shutdown_time=0
poi_show_all_btn=1
Resolution_dir="240_400"
and
[rawdisplay]
highres=1
Driver="GDI"
minzoomglobe=6000000
show_gps_config=1
show_tmc_config=0
show_orientation=1
show_exit=1 ; obvious
disable_3dstick_labels=1 ;
mapfontscale=130 ; for 2d and 3d map
newalignment=1 ;
show_zoombar=1 ; also see zoomscale_disappearing
show_timezoneslider=1 ;
minzoom2D=40 ; zoom in level 2d
autoscroll_on_click=1
popup_info=1
poi_show_all_btn=1
exit_on_restart=0
use_spec_fav=1
spec_fav_count=4
drive_carefully=0
;maxzoom2d=6000 ; zoom out level (disabled get you into space ;O)
class="portrait"
screen_x=480
screen_y=800
;class="landscape"
;screen_x=800
;screen_y=480
most ofthese settings are for tweaking - the importabnt ones are the Bold.
plus - you need the correct branding.zip supporting your resolution.
Also don't forgett that when you have installed igo with the 2511 you have a directoy under Programs which also contains the sys.txt - in this case this sys.txt would be the one used from the application.

Sasimi said:
I unpacked it, and it does contain 480_800's ui etc and also 800_480's stuff.
Could you maybe upload yours?
Click to expand...
Click to collapse
You have a PM.

About the "search" keyboard ??
Hi guys.
My iGO8 is working perfect exept one thing. I can´t choose Danish QWERTY (or other danish) when i´m searching for an adress, and that means i cant search after zip codes in Denmar?? :O(
I have searched the net for a lot of different lang files but i think i might be missing something because nothing works
The program language is set to Danish and everything else is working like a charm...
Can anyone help me?
Best regards Michael

This is file sys.txt have use for Igo8 3.2.xxxx.
[folders]
app="%SDCARD%/iGO8"
[interface]
maxzoom2d=6000000
mapfontscale=120
show_exit=1
recalc_voice=0
shutdown_time=0
minzoom2D=80
vga=1
store_orig_os_vol=1
[navigation]
sim_speed_factor=1
show_current_city=1
show_countrychange=1
[sound]
ding=2
use_os_volume=1
[debug]
skip_eula=1
disable_outlookpoi=1
freeze_result_time=0
show_oneway_3d=1
show_oneway=1
[map]
3d_max_tiltlevel=8900
3d_default_tiltlevel=8900
inertia_on_map_move=0
3d_scale_carmodel=2
3dcarsizemin=2000
3dcarsizemax=3000
3dcarsizemul=10000
2dheadup=1
sieve_mode=0
[mydata]
max_favorites=100
[poi]
enable_pois_before_080217=1
[utility]
utilitymov=",1,\SD Card\IGO8,"
utilitydel=",2,\SD Card\iGO8,"
[rawdisplay]
highres=1
driver=gdi
[3d]
use_all_building_textures = 1
[3d_config]
roadsign_lines_per_screen=24
rotated_roadsigns=1
[timezone]
sync_os_timezone=0
reset_os_timezone=0
[roundaboutcam]
enabled=0
centery=20

Problem with IGO8 on HTC Tytn II
FileFixer said:
You must run AUTORUN.exe located in "2577" folder to install iGO 8. When you install iGO, exe file is located in Program Files -> iGO 8. Inside iGO folder, you will be find "sys.txt". Open it in txt editor on your computer and paste this iGO commands to it. Replace your sys.txt with it and start iGO.
If you don`t any map on MAPS folder iGO will dont be start properly.
application.dat is iGO8.exe file. Just reneme it and start iGO8 without install.
Click to expand...
Click to collapse
J work just like that, but my navi works only few moments after instalation. Than, my IGO8 do not work, and in PDA device make new file:
firefly_error
(Failed to open file:
ui_igo8\480_800\loading.bmp
exiting application.)
Tone_Sample
(Total elapsed time =272)
Where did J make mistake. Pls help

Plz send me the Branding with 800x480 res, i have the wrong one
Thanks!

I have problem with Igo8...
Before one week it work normaly..
now,gps didnt finde satelites...like no sognal..no fix satelites..
i dont know whats wrong...

IGO and Pro2

Is there anyone who has IGO running ?
Could you pls give us the right sys file !

Igo 8.3.2.64029 or 87762 won't install or run on HTC Touch Pro 2
Dear Peter7,
What is your problem? Which version and settings do you use? I just posted this post on the gpsunderground.com forum. Do you have the same problem?
Hello all,
I've been trying to install igo 8.3.2. on my new HTC touch pro 2. Without any luck, because the installer never finishes (simply quits after a few seconds) and when I try to simply run Igo from my microSD card (by renaming application.dat to Igo.exe) it only shows the splash screen for a few seconds and then quits. Igo than stays active as a process and can only be killed with an advanced task manager or by soft-resetting my TP2.
I've tried two official PDA releases (build 64029 and 87762, both with WVGA support) and various sys.txt configurations, all with exactly the same result (Igo disappears after showing the splash screen for a few seconds).
Even this (extremely simple) sys.txt, which should always work on the official PDA releases does not improve anything:
[project]
name="igo8_pda"
[interface]
maxzoom2d=3000000
show_exit=1
[map]
3d_max_tiltlevel=7800
3d_scale_carmodel=1
3dcarsizemin=3000
3dcarsizemax=4500
3dcarsizemul=10000
[rawdisplay]
highres=0
autoconfig=1
As a license file I use the well-known [email protected]_(NNG+TA_HUN_TMC).lic
The same configuration runs flawlessly on my old PDA (dell X51v), but not on my new phone....
Does anybody know what the problem is, because this problem is driving me mad...
There is also this thread I found about Igo on the Touch HD, where some people seem to have the same problem (with a different Igo version), but not a clear solution.

Almost the same with me ...spent hours on a solution ...but ....now I`m asking if we must look for Navigon or ....

peter7 said:
Is there anyone who has IGO running ?
Could you pls give us the right sys file !
Click to expand...
Click to collapse
mine is running ok. make sure you have the latest data file. which included 800_480 file. then include the following into your sys. file
[rawdisplay]
driver=gdi
resolution_dir="800_480"
[rawdisplay]
screen_x=800
screen_y=480
vga=1

Is this ok ???
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
[device]
Type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
resolution_dir="800_480"
screen_x=800
screen_y=480
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40
[rawdisplay]
highres=1
autoconfig=1
driver=GDI
[sound]
ding=0
[config]
autoset2donmap=1
autoset3doncockpit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=95
Backlight_night=15
[poi]
enable_pois_before_080217=1

doraemon - pls send me your whole sys file ....!!!
Are you using TMC too ?

peter7 said:
Is this ok ???
[folders]
app="%SDCARD%/iGO8"
save="%SDCard%/iGO8/save"
[device]
Type="ALIAS_TOUCH HD"
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
resolution_dir="800_480"
screen_x=800
screen_y=480
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40
[rawdisplay]
highres=1
autoconfig=1
driver=GDI
[sound]
ding=0
[config]
autoset2donmap=1
autoset3doncockpit=1
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[map]
3d_max_tiltlevel=8000
3d_max_zoomlevel=3000
3d_min_zoomlevel=40
3d_max_zfar=2000
3d_scale_carmodel=1
3dcarsizemin=3500
3dcarsizemax=5000
3d_carsizeemul=60000
[tts]
always_say_road_names=1
announce_exit_directions=1
announce_street_name=1
gps_disconnected=0
gps_signal_lost=0
Recalc_voice=0
[debug]
disable_outlookpoi=0
show_oneway=1
show_oneway_3d=1
show_lane_info=1
show_speed_limit=0
skip_eula=1
enable_roadshadow=1
[power]
powermgm_state=0
backlight_day=95
Backlight_night=15
[poi]
enable_pois_before_080217=1
Click to expand...
Click to collapse
This worked for me when i changed only the following from highres=1.
[rawdisplay]
highres=0

same here :-(
Can't get rid of the TyTN

iGO works fine for me
Hi guys,
the problem you have I can only assume is the version, I had a previous version which worked perfectly on the Tytn 2, but it crashed out after barely loading the splash screen on the TP2.
Eventually I downloaded Nav 'N' Go iGO v8.3.2.71348, since then it has worked perfectly.
It took a minor bit of tweaking to get the maps working correctly as mine were downloaded from (Cough, ahem!) interesting places but now it's spot on.
The only problem I have now is that it basically just runs, there is no install setup like there used to be, that causes a problem as it used to allow navigating direct from contacts details, this version doesnt have that ability :-(
I hope this helps guys.
Terry

peter7 said:
Almost the same with me ...spent hours on a solution ...but ....now I`m asking if we must look for Navigon or ....
Click to expand...
Click to collapse
Dear peter7,
No need, you can solve your problem by adding these two lines to your sys.txt:
[device]
sdcard_dsk_num=7

Thank you - but
it`s still not working ...
What else must I do ?

I did it! It finally works Its a license problem not a sys.txt problem.

Oh tell us what we must do ...but I have a orginal software !!! so is it also a license problem ?

I have Touch Pro 2 and Igo 8.3 runs perfectly well with me . I have the latest June 8 version with all maps 2009.02
If you're into GPS navigation this is the ONLY place you will need to know .....
Sign up first in you're not a member...
PM ME for the link........
But first, please read the forum throughly before asking a question. Becuase your problem might have been already discussed over and over there.

Has anyone managed to fix the "failed to reserve virtual memory space" error that sometimes occurs when starting Igo8? A soft reset always resolves it, but isn't very convenient. There's usually plenty of memory available when this occurs (i.e. at least 60Mb)

Hi doublecheese - can you please tell me if these files are the right one ?
branding_8[1].3.2_fixed
data_8[1].3.2_fixed_v10b
I have an original version Europa 1/2009 8.3.2.87762
It is trying to start but then it stops ....and I really spent one day with finding a solution and also read at pcwarez.....
I need you help _ could you send me the right files which you are using ?

don't use anything that says FIXED !!!!
wait a couple of days , then they will come up with a better solution anyway.
here's the one I'm using now ......
PM ME for the link.....
it works like a charm on my TP2
if it still doesn't work, delete all your IGO 8 files, uninstall the program. Then read that forum from start till end

Do you have TMC ?

Doublecheese - pls send me the sys file too !
THANKS a lot

guys please read the forum I sent you, I don't want to brick your phones by a mistake.
On my Touch HD , I did something wrong with IGO registery and the HD never started, only a hard reset solved it.
Read the forum for yourself and decide what to do or not ......

my igo primo Working in a horizontal mode and in vertically mode it's not full

hello
i have igo primo 9.6.7 and in vertical mode it just great and i can see all the screen with the buttens but in horizental mode i can't see the "out" buttun down
i added here the SYS file that i have
according to the instructions i need to change these line :
[rawdisplay]
driver=engine
screen_xy="auto"
or to auto or to
[rawdisplay]
driver=engine
screen_xy="800_480:1280x720/720x1280:fullscreen"
i change them both and nothing help.
what i can do with that?
thank you

someone??