Related
for those who are interested I have uploaded the Australian 3 extended rom for installation after WM6 installation, plus the cab file for set up of other networks- Dopod D810 only.
http://rapidshare.com/files/38093805/Aust_3_ext_rom.rar
http://rapidshare.com/files/38094297/CWW_Enterprises_AUS_Operator_Con.cab
enjoy!
Does this ETX rom have all the things in it required to use planet 3, stream video, use X-series etc?
Just wanted to say thanks for this!
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
can someone host the file on something other than rapidshare, i cant download it for some reason.
zeu569 said:
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
Click to expand...
Click to collapse
you need to unlock the extended rom but that is already unlocked on WM6 versions- i have LVSW wm6 rom installed and it works great.
i will try and upload it somewhere else.....
Silly question but how do you install it?
Hi I have downloaded it and all is well and really it looks like all I need to do is
install the cabs one by one ----- but that ain't right is it?
As Paulene Hanson would say ----- Please Explain
stick them in the extended rom and install from there.
Little foggy on the terminology sorry
MontAlbert said:
stick them in the extended rom and install from there.
Click to expand...
Click to collapse
Hi Thanks for the reply please go easy on my noobness but I am not sure by what you mean??
I mean I extracted the extended rom and went in and excecuted the file in that folder --- I then get a question asking me on my trinity if I want to allow a program (enterbootloader.exe) to execute and then it drops out and the flash screen comes up on the trinity but the flash program on the computer says it has an error comunicating with the device and only finishes with the exit option - however no flash takes place
I get the same with the ax3l rom can anyone help? I think i'm missing some basic ideas here
Maybe i should start a new thread --- but any help would be great
I've uploaded the files to my blog. You can get to them from here:
http://www.webdevblog.net/2007/06/26/windows-mobile-6-setting-for-3-australia-dopod-d810/
Hope this is ok MontAlbert?
Enjoy!
bump please
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
andytof47 said:
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
Click to expand...
Click to collapse
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
grahamrb said:
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
Click to expand...
Click to collapse
hehe- keep waiting mate- gave up waiting a month or 2 ago and am so glad i did. i figure if anything goes wrong with it i will flash it back to the old rom. I am now using Ax3l's ROM and its great.
to make the files work just click on them and they will install each relevant piece of information.
MontAlbert said:
to make the files work just click on them and they will install each relevant piece of information.
Click to expand...
Click to collapse
Copy the "CWW Enterprises AUS Operator Con" file onto the pda and then run it.
What do you do with the rar file - "Aust 3 ext rom"?? Unzip it and transfer the contents onto the pda (12 odd cab files)?? And what about the exe files in there and the ExtROM.rar file (also in the Aust 3 ext rom rar file).
Thanks for any info you can provide.
Graham
EDIT: Just saw this post by you, now I see where you got all those files from, I just don't know what to do with them now I guess:
http://forum.xda-developers.com/showthread.php?t=307275
I need to check out my 3 on my 3 phone ---- help
Hi I am just wondering something, I have the cab files and am playing around with them, but I really only want one thing from them, and that is the access to my 3 ------ everyone with 3 Australia knows what i'm talking about--- anyway, I am using LSVW windows rom and it nice -- much nicer than the default that came with my dopod/trinity --- but I can't check my account now because the icon is gone -- obviously
but I am guessing it is only a small file or something can anyone help me get my three icon back ---- also can anyone give us a quick break down on what the cabs do and the information of why we would want to install the extended rom??
Cheers all
andytof47 said:
but I really only want one thing from them, and that is the access to my 3
Click to expand...
Click to collapse
search for the cab file, CWW Enterprises AUS Operator Con. Run it and it will setup a access point thingie for 3.
then open your ineternet explorer and type the address three.net.au, go to that page then you will be able to find My3
YOu dont even need the CWW Enterprises AUS Operator Con cab file if you already have the 3 services setup on your phone which can be done manually if it is not already there. You can checkout hte three website or call 3care and ask someone to help you set it up.
aaah the CWW file is the 2nd file in the OP
acess denied on three.net.au
Yeah, I installed the CWW Enterprises AUS Operator Con, and ran it, then chose 3, but I am getting an access prohibited error when I connect to three.net.au
Am i supposed to install all the three rom? or is it just that cab --- remember that all i want is to access my three
Cheers
Hi,
Does this work with other ROM ?
Thks
cmon little help maaaaates
Cmon guys lets work this out -------- I gather most of us would be on 3 within oz
so it will help us all
installed all and I have the key back
Hi Just an update --- I installed all of the extended cabs ---- I was still getting the problems with access being denied however It was MEEEEEEEEE I was trying to connect via my wireless connection not GPRS
It's all Good now
Cheers all
Hi People
First off, want to say hi, really looks like a nice community here, and hoping to be a human sponge and soak up all I can from you
Hopefully be able to contribute at some point in time.
I got a SPV m700 (Trinity) from Orange, and using my T-mobile sim card in it, after installing mun's ROM update.
Just wanted to know - does the INTERNAL gps still work, as I can only see the external GPS setting.
Will be loadin up TomTom as soon as I get a memory card.
Any other suggestions from you guys - that has experience with t-mobile settings for this phone?
cheers!!
You'll be fine.
Don't mess with any of the GPS settings, and when you install TomTom set it up as follows:
Other NMEA receiver
Com 9 Baud 115200
Cheers buddy.
I went thought the massive thread (tried to anyways) and could get a straight answer if it's still enabled or not.
Thanks
With tomtom, just use the Built in GPS setting.
soopahfly said:
With tomtom, just use the Built in GPS setting.
Click to expand...
Click to collapse
Sweet - like these kind of answers
"JUST leave it alone"
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
sup3rc0w said:
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
Click to expand...
Click to collapse
It' in NeilM's third post (look for 'try this')!
Jazza said:
It' in NeilM's third post (look for 'try this')!
Click to expand...
Click to collapse
GAH - I'm going blind!
Thank mate - can't believe I missed that
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
pinkllama said:
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
Click to expand...
Click to collapse
You're the man.
I knew p[osting here will be a good idea
sup3rc0w said:
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
Click to expand...
Click to collapse
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Windoze9t8 said:
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Click to expand...
Click to collapse
There is no cab file, only a setup.xml
sup3rc0w said:
There is no cab file, only a setup.xml
Click to expand...
Click to collapse
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Windoze9t8 said:
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Click to expand...
Click to collapse
Cheers dude - second link works just fine, first one is just a bunch of XML files for some reason
Might have something to do about work blokcing it - but I doubt it.
Just caught up on this thread- sorry!
Glad you now have the HTC HomePlug- I've just tried the download from our site, and it worked fine, so maybe a config problem on the PC you were using?
If you haven't already, just copy the cab file to the PPC, then locate it with Pocket File Explorer, and tap it to install.
Now go to Settings/Today/Items and put a checkmark against it, and uncheck other plugins you don't need, and voila !
Hay guys, let me just say im complete newb at all this phone stuff unforchunalty. I dont know anything about this stuff so im asking for your help please. Ok, i want to get the upgraded HTC tf3d on my AT&T titl 2. I'm sick of the blue AT&T blue. Is it possible to get Max Manila 2.5, (I think that whats it called) for my phone? I dont know how to dl it onto my phone, or aanything. So please if any of you guys can help id be very thankful. Note, I dont know how to unlock or flash my rom, I dont even know what that mean but i see them alot. Thank guys.
Welcome to forums
yes you can have Manila 2.5
Have a deep read here to learn how to flash:
http://forum.xda-developers.com/showthread.php?t=550540
Then select the ROM of your preference on the Rhodium section
Read, Search, Respect and Emjoy!
Good luck,
And don't forget to vote for Rhodium!!
Hay thx orb3000!
Since you are newbi I recommend the Energy
To have most of the work done for you check out:
http://forum.xda-developers.com/showthread.php?t=562773
I am running NRGz 21855 Dec 31st Standard build and it is pretty sweet. A few bugs but it is still nice. NRG also puts out another TP2 ROM which is less than bleeding edge but more stable codenamed Pheonix. Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Omg kroniced thank you to for repling, Im having a hard time with this, there is a good chance im going to be asking for help. Thanks alot for the link man, I really mean it.
kroniced said:
Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Click to expand...
Click to collapse
Wait, what?
As in, Touch Flo 3D 2.8? As in a new version over Sense UI 2.5, already found on Leo & custom roms for other devices?
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
theherofromdoom said:
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
Click to expand...
Click to collapse
So what exactly happens when you run Rhodium-HardSPL_V2_00R3.EXE? Is it a connection error, a program error, a device error? If you have a Tilt2, you probably need to install this to your device before you run the executable. BTW, you're not backing up your device with HardSPL, you're replacing the stock, HTC bootloader with a patched bootloader, a process which you only need to do once. It's also not necessary to back up your device before flashing a new ROM, it's just recommended if you have important stuff saved to main memory, since you lose all the data on your device each time you flash. You will not lose data when installing HardSPL with this executable.
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
theherofromdoom said:
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
Click to expand...
Click to collapse
A .cab is an installer, just like an EXE or MSI on a desktop computer. Don't uncompress it, just put the .cab file as is onto your device, disconnect your device from the computer, browse to wherever you put it with File Explorer Mobile, and open it. Install it to internal memory and you're done. Also, try disabling your Antivirus/Firewall and ensure you have Windows Mobile Device Center (Vista/7) or ActiveSync (XP and lower). And no offence, but you might want to hold off on flashing for a little while, at least until you get a bit more acquainted with Windows Mobile. I recommend that everyone who flashes their device at least understand the technical aspects, since that highly reduces chances of bricking as an end result.
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Get accustomed to you phone by doing the minor cabs and tweaks found here:
http://forum.xda-developers.com/showthread.php?t=524655
Most of this stuff is harmless and will get you use to using cabs and changing things on your phone.
theherofromdoom said:
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Click to expand...
Click to collapse
No, that .cab enables RAPI (Remote API) on the Tilt2, which allows programs like the HardSPL unlocker, on the PC, to control the device to an extent, which it needs to do in order to flash HardSPL.
Hi, How can I get the actual version of manila running on my Tilt 2
Thanks
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
sirphunkee said:
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
Click to expand...
Click to collapse
minor correction: HKLM\Software\HTC\Manila\Version
On the stock Tilt2, the version is 2.1.19183217.0
Note that this can also be seen by looking at the About section of the Settings tab in TF3D.
This is awsome DaveTheTytnIIGuy, the programe you sent me worked. I was suscussfully able to flash my HardSPL, with Rhodium-HardSPL_V2_00R3. Thank you. So now I'm up to the next step witch is finding a ROM.
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
raveztaylor said:
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
Click to expand...
Click to collapse
The only way to get a different version of Manila is to change ROMs. If you're using the stock ROM, you'll need to switch to a cooked ROM to get one of the newer versions of Manila.
Is there a cab or anything that'll give me the Sense 2.5 email tab for my Sense 2.1 TP2. I only found one cab (kimi_sae_ireba) but it didnt work correctly. There's a lot of white and out graphics issues. I saw something in that post about editing the 220edf70_manila file for a WVGA device, but I wouldn't know how to do all that. Id love to have it tho, so any help would be appreciated.
Assuming you're still on a stock ROM as most people who use TF3D are, why not move up to a 2.5 ROM that has it? Development on 2.1 is all but ceased. There are very few chefs who still cook it in to their ROMs.
If you are stuck on having 2.1 over 2.5, try out Jackos Sense 2.1 ROM. It's very popular and stable.
Outside of these suggestions, maybe you could per$uade a chef or someone to mod the mode9 file you need to make it work. I wouldn't expect much, though.
My SmartMOVE ROM (Sense 2.1 + WM6.5) does have included the e-mail tab from Sense 2.5 mod by kimi_sae_ireba and it does work fine
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
jwatts03 said:
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
Click to expand...
Click to collapse
Why not just flash Jackos' ROM? It manages memory way better than the stock ROM. You'll have more RAM and a more stable experience overall in my opinion.
I did just look at that Rom, and I would kinda like to try it. I only have 2 problems. 1, I have lots of programs. And dont really wanna have to go through that whole process again. And 2, it has (SP1) (SP2) to download after the Rom, and Im not really sure what those are.
jwatts03 said:
I did just look at that Rom, and I would kinda like to try it. I only have 2 problems. 1, I have lots of programs. And dont really wanna have to go through that whole process again. And 2, it has (SP1) (SP2) to download after the Rom, and Im not really sure what those are.
Click to expand...
Click to collapse
What do you mean SP1 and SP2? Have you flashed a ROM before? If not, then you have a bit of reading to do before flashing all willy-nilly. Head over to the flashing for noobies thread to get a bit more info on the topic.
The proper order for flashing new ROMs is to unlock the SPL on the device, perform a task29, flash the stock ROM, task29 again, then flash the custom ROM. The first time is always a little scary.
Ive flashed before. I thought I found a good rom but this one looks like it might be even better. But look at this post I found http://forum.xda-developers.com/showthread.php?t=632617 After the rom download link it has 2 separate "SP" files to download too. But I dont know what those are.
Also it says it has Tom's autoinstall installed in the rom, will that install to the phone or the storage card? I dont want everything installed to the phone.
jwatts03 said:
Ive flashed before. I thought I found a good rom but this one looks like it might be even better. But look at this post I found http://forum.xda-developers.com/showthread.php?t=632617 After the rom download link it has 2 separate "SP" files to download too. But I dont know what those are.
Also it says it has Tom's autoinstall installed in the rom, will that install to the phone or the storage card? I dont want everything installed to the phone.
Click to expand...
Click to collapse
Next time, searching would likely answer your questions more quickly.
SP1 explanation
SP2 explanation
As far as Tom's autoinstall, yes it does install to the internal memory. There shouldn't be a need to reinstall everything to the SD. Some of them have settings that install to the internal memory or the registry, but the majority of them that you install to the SD stay there. For more questions about Jackos' ROMs, please ask on that thread. You'll get much better answers there. Jackos supports the ROMs very well. Just make sure you read and search properly before firing away with the questions, just like on any other thread.
jwatts03 said:
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
Click to expand...
Click to collapse
Just install this: Sense 2.1 Email Tab Add-on V3 ported from Sense 2.5*
And later that: WVGA fix.
Here is the post: http://forum.xda-developers.com/showpost.php?p=5202526&postcount=3 Just look in the tweaks/mods section.
PS You don't need to edit anything Just ensure that you're running a Sense 2.1 (not TF3D) ROM.
06/16/2011
The screenshots are not important. This is not a theme!
You can install a theme from here, for example if you like.
The theme it comes with is the:
Go Louncher Classical Theme (The new version of it)
The software installed is also not important, because you can remove it.
Google Market is installed, and you can install what ever you like, just like on your computer.
https://market.android.com
This is the actual Android Froyo operating system for the HTC Kaiser
So, stop asking me for screenshots and software installed, it's not relevant.
And the how to install guide is been posted here
Bug reports are welcome, other then that, I don't wont to hear from you.
Don't post a thank you either, there is a bottom for that, and you can also vote on the poll up there, but install and test it first!
Again Bug reports only, please!
I been working on this for 3 days straight, and figure I'll share what I got.
Everything seems to be working, except the camera is blurry, but that seams to be the norm.
Included is the rom, radio and kernel
ROM: 2.2.1
Kernel: 2.6.25
Radio: KAISER 1.70.19.09
Panel: 2
Key Map: US Normal
Resolution: 240x320
Storage: Nand & Nand
Most everything is installed in userspace and can be uninstalled or upgraded.
Oh got GO Launcher EX installed (Also in user space)
Credits:
I stole ideas from, and used following tools:
Makers of atools
Makers of NBH creator
HTC Flasher
kallt_kaffe
Krazy-Killa
dzo (dzo's posts wore a big help. just wish he would answer his own questions after he found the solution)
n2rjt
and many more.
@todo
Resize NAND partitions to the smaller system size
Original post and download Links are posted on my blog:
http://press.pzzazz.net
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
MaRekRM said:
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
Click to expand...
Click to collapse
Yeah witch apps are include. Some yours tweaks or etc... ???
MaRekRM said:
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
Click to expand...
Click to collapse
That sounds like a trick question.
Yes, at first I compiled everything my self but then to resolve bugs, I looked at other systems and basically stole stuff from them to fix my bugs. In other words, I can't take all the credit, it was a community effort.
Neo2SHYAlien said:
Yeah witch apps are include. Some yours tweaks or etc... ???
Click to expand...
Click to collapse
I removed most everything from the system and installed it in user space. So the system is very lean. You can uninstall what you don't like.
how is the rom？just waiting to see
gruessle ...!! thanks for your efforts in getting this done... I been looking from long time to install Android on my HTC TyTN II. However i was not able to get the proper build...
can you share the screenshots of the build which you provided as well some steps at high level on installing this..
Thanks in advance.
Please, I don't really understand how to go upgrade this. I find it hard to do. Is everything needed packaged in this download, or please can u list things needed to change to android. I'll appreciate your response.
tundelogic said:
Please, I don't really understand how to go upgrade this. I find it hard to do. Is everything needed packaged in this download, or please can u list things needed to change to android. I'll appreciate your response.
Click to expand...
Click to collapse
here is the howto
http://forum.xda-developers.com/showthread.php?t=680518
kkp said:
gruessle ...!! thanks for your efforts in getting this done... I been looking from long time to install Android on my HTC TyTN II. However i was not able to get the proper build...
can you share the screenshots of the build which you provided as well some steps at high level on installing this..
Thanks in advance.
Click to expand...
Click to collapse
The screenshots are not important.
This is not a theme.
You can install a theme from here, for example if you like:
http://golauncher.goforandroid.com/category/themes/
The theme it comes with is the:
Go Louncher Classical Theme (The new version of it)
The software installed is also not important, because you can remove it.
Google Market is installed, and you can install what ever you like, just like on your computer.
https://market.android.com/
This is the actual android froyo operating system.
Anyone else having trouble getting the kernel to install?
I get to 33% and the phone reboots...
Radio installed fine even though I was already using 1.70.19.09, just to be sure I installed everything in the package.
Installed HardSPL 3.34 and a WinMo 6.1 rom (custom) to see whats wrong. Installed L1q1d's kernel and goes right in like it should.
Checked .NBH with NBHCreator and only found 1 thing wrong: kernel set to Eclair instead of Froyo. Changed to Froyo and saved, attempted reflash and still won't go in...
;(Losted);
I also tried to install this kernel but I can't. Flashing in hardspl after few second give folowing error:
00018003
Os Fail
Update Terminate
UPDATE Fail.
Changing parameters in atools not helping. Every another kernel is flashing without problems so it's not phone fault
Gruessle, thanks for your efforts! I want to try your rom but being a noob waiting for more comprehensive list of known errors before flashing it to my kaiser.
Ok, quick "bug report":
After working with the kernel pack multiple times I have come to the conclusion that there might be a bug in the actual kernel file itself, throwing a code back to HardSPL and RUU (how I install).
I first noticed a problem in that the kernel was originally set up for a Polaris and had no resolution set. The size of the file should be unimportant as Scoot's newer kernel is in the order of 3.2-3.3MB in size (with the RIL patch installed it gets even larger), this one is 3,099KB, and l1q1d's is almost always 3,092KB.
The second issue I noticed is with the Froyo package itself... It's split up into many files (open the package in 7zip and you'll see what I mean). Normally, the packer has the files all listed inside the .tgz file, this one has the files inside many other files.
I have thus not installed the system on either phone because (correct me if I'm wrong), the kernel contains the basic directories for where everything is installed, and if I were to try and install this package on say, l1q1d's kernel, the phone would most likely crash because the files would not be found, including /system.
If ANYONE wants to dig deeper into this problem, feel free to message me. Personally, I think we've about finished getting all we can from the Kaiser, and much respect goes out to those who have done all the work in the past, but there's always that glimmer of hope that someone will find a way to pack this into a working rom installable through RUU or HardSPL.
I have one last thing to say:
Gruessle, please do your homework BEFORE posting things like this. There are people out there who still depend on this phone to operate as it is their only phone. I Personally cannot afford to go spend $100-200 on a replacement phone if this one goes down (thats why I have 2 of them). If you post something that does not work on the platform that you say it will, please correct it or move it to the proper forum.
BTW, I call shenannegans on one of the 5-star votes... just sayin'.
Your kernel have fake ;/ . rom works great ;D
sorry for bad english;p
PoXFreak said:
Ok, quick "bug report":
After working with the kernel pack multiple times I have come to the conclusion that there might be a bug in the actual kernel file itself, throwing a code back to HardSPL and RUU (how I install).
I first noticed a problem in that the kernel was originally set up for a Polaris and had no resolution set. The size of the file should be unimportant as Scoot's newer kernel is in the order of 3.2-3.3MB in size (with the RIL patch installed it gets even larger), this one is 3,099KB, and l1q1d's is almost always 3,092KB.
The second issue I noticed is with the Froyo package itself... It's split up into many files (open the package in 7zip and you'll see what I mean). Normally, the packer has the files all listed inside the .tgz file, this one has the files inside many other files.
I have thus not installed the system on either phone because (correct me if I'm wrong), the kernel contains the basic directories for where everything is installed, and if I were to try and install this package on say, l1q1d's kernel, the phone would most likely crash because the files would not be found, including /system.
If ANYONE wants to dig deeper into this problem, feel free to message me. Personally, I think we've about finished getting all we can from the Kaiser, and much respect goes out to those who have done all the work in the past, but there's always that glimmer of hope that someone will find a way to pack this into a working rom installable through RUU or HardSPL.
I have one last thing to say:
Gruessle, please do your homework BEFORE posting things like this. There are people out there who still depend on this phone to operate as it is their only phone. I Personally cannot afford to go spend $100-200 on a replacement phone if this one goes down (thats why I have 2 of them). If you post something that does not work on the platform that you say it will, please correct it or move it to the proper forum.
Click to expand...
Click to collapse
1) The kernel doesn't care where you place the files. Right now I use a debian system with Ferora and Gentoo in a chroot. Both work fine with the Debian kernel.
In other words, if you have a kernel that works for you then use that it should work with the rest of the installation.
2) I don't get what you mean with files are "split up into many files", I am just guessing but you must be extracting it wrong. Maybe it's a windows thing, I haven't used windows in 15 years so I wouldn't be able to help you with that.
3) I have included everything you need to duplicate what I got, which works for me, and it appears to work for others too. Now i don't use that phone much, and there might be bugs I am unaware of, but don't tell me it doesn't work at all, just because you can't get it to work.
barmalini said:
Gruessle, thanks for your efforts! I want to try your rom but being a noob waiting for more comprehensive list of known errors before flashing it to my kaiser.
Click to expand...
Click to collapse
barmalini, it appears that a few people have trouble installing the Kernel, but the ROM seams to work for everybody as far as I can tell.
According to my server records the files have been downloaded over 200 times and I have yet to hear a complain about the ROM.
So I would say try to install the Kernel, but if you can't still use the ROM with a Kernel that works for you.
If you have trouble installing from windows you can also try a live CD from debian or knoppix. I installed everything from a Debian system. (Knoppix is based on Debian)
If you don't know what a live CD is then go here for info:
http://wiki.debian.org/LiveCD
PoXFreak said:
Installed HardSPL 3.34 and a WinMo 6.1 rom (custom) to see whats wrong. Installed L1q1d's kernel and goes right in like it should.
Checked .NBH with NBHCreator and only found 1 thing wrong: kernel set to Eclair instead of Froyo. Changed to Froyo and saved, attempted reflash and still won't go in...
;(Losted);
Click to expand...
Click to collapse
PoXFreak,
you are not the only one having trouble, installing the ROM it appears.
I am wondering, are you also using Microsoft Windows to install the ROM?
If so can you try again with Linux, because it worked fine for me.
If you don't have Linux you can use a Live CD
Also if you can't get it to work, try the ROM with a Kernel that works for you.
Please report, I will check back.