hi,
i wanted to create my own background-theme, and this thread was very helpful:
http://forum.xda-developers.com/showpost.php?p=3062019&postcount=54
(you need the Background4AllTabs "5c9aa261_manila" & "4a087e41_manila" from NisseDILLIGAF)
the problem was, i had a circle in the picture, and every time it was stretched or squashed, wrong aspect ratio, not fitting well. so i did a little research myself - pixelcounting fun.
conclusion:
1. crop your original-pic (maybe 800x480) to 700x480 (the real background size, 50 px from the top and 50 px from bottom)
2. create an new empty 512x512 file
3. resize your 700x480-pic to 512x460, squash squash squash (!)
4. paste it in the empty 512x512 on the left side(!) leaving an empty unused bar of 52px on the right side
5. do all steps from the link above to convert it for manila
nothing stretched or squashed anymore. full circles.
FINAL note:
this method works only for NisseDILLIGAF's *5c9aa261_manila* that came from the diamond. it works, but it also has the blackhole problem.
bbonzz's method (look below) works for http://forum.xda-developers.com/showpost.php?p=3068310&postcount=60 (blackhole solution).
both have no problems with nocurtains-mod. baah, too much confusion about the manila files...
Actually the background is 480x636 (image 1), because of the top curtain hole in background4alltabs.
So, to keep the aspect ratio, what you have to do is more simple:
1) cut you 480x800 (image 2) to 480x636 (image 3) keeping 52 px from bottom (bottom bar) and 112 from top (top bar+top curtain)
2) stretch to 460x512 (image 4)
3) add a 52px transparent (or whatever: black, white... It will be invisible anyway) canvas to the right (image 5)
voilà, you have a pic for Manila Editor, and once installed on Blackstone, Manila will resize it back to the original 480x636, without distortion and without shifting a single pixel. You can verify this by using the original 480x800 as background for the home tab (image 1): switching tabs, you'll notice the image is still the same: no movements, no distortions.
do you guys have a problem with a black hole at the top of the background in sound settings on the settings tab ?
check this!
hi bbonzz,
i tried your version and it does not match. check the attachment.
manila stretched the logo and it ended up as an egg.
the best way is to compare the original (800x480) as homescreen-background against the manila version background in the other tabs. that was the game i was playing. after several try&errors i found it. the mapping-coordinates for the manila-background in my tf3d background4alltabs is 700x480. 50px less reserved for the top-taskbar and 50px less reserved for the softbutton-bar at the bottom.
manila stretches the left space of the 512x512 texture (512x460) to 700x480 perfectly and the aspect ratio of the original is back.
by the way, the black hole is still a problem, but doesn't bother me.
maybe it depends on which 5b9aa261 are you using: on my HD (with the "corrected and not the original 5b9aa261), using the same try&error way, i have the perfect fit with the 480x636 thing, as you see in the screenshot. Later i'll try with your attachment
ok, i forgot to mention that "nocurtains" is installed on my hd. maybe thats the reason why you got 636 px instead of 700 px.
4a087e41_manila
Hi sir AlecDelorean and other member can you make me a 4a087e41_manila with my attach file, thanks advanced...
please test this
hi p_elmenzo,
do yo have the 2 files from background4alltabs already installed?
if yes, here you go. don't forget to backup you original manila files.
don't blame me if something goes wrong
and please compare your original pic as background for the homescreen against the new background in the other tabs. if anything moves, or looking stretched, send me a screenshot.
4a087e41_manila
Thank you very much AlecDelorean...
Grazie Mille AlecDelorean...
4a087e41_manila
Hi, again AlecDelorean i have a small problem when i change my tab the background image has change maybe the pixel of the image.
i know, its a problem of the image-compression/conversion in manila-editor. when i have time, i add a little grain in photoshop to trick the compression-algorithm.
4a087e41_manila
Ok Thanks a lot...
here you go again
ok, did some tests. i don't know much about the converting process of the manila editor, but it seems it reduces a lot of bandwidth of the colorspace combined with very rude compression. so by example - gradients loose a lot of quality, instead of other more colorful pictures where the difference of every neighbor pixel is higher. maybe its the 3d-texture method htc is using, they try to save as much memory as they can. an interesting thing to notice (compare your screenshots with the original pic), there is an converting-process included in tf3d by itself, but only for the homescreen, when you choose an own picture for the homescreen background - tf3d crops it, adds grain and compression.
enable your background of the homescreen back to standard, because the manila-background is the background4alltabs now and you can't see the difference anymore if you switch from homescreen-tab to the others.
4a087e41_manila
Hi, AlecDelorean do you have the original file of 4a087e41_manila and 5c9aa261_manila? thanks a lot.
haha
tired of messing around with the backgrounds?
you need only one. 4a087e41_manila is a new image file for background4alltabs, 5c9aa261_manila is a script that was changed.
Hey AlecDelorean, can you do this for me as well.. Thanks!
I have just one question...
HOW do i get rid of the black curtain on top of the screen??
please please please say me how!!!
In nearest future we wont use this method. A real background for all pages done.
mun_rus said:
In nearest future we wont use this method. A real background for all pages done.
Click to expand...
Click to collapse
Our saviour is back! Hope your feeling well now..
@ ArchonX
ArchonX said:
I have just one question...
HOW do i get rid of the black curtain on top of the screen??
please please please say me how!!!
Click to expand...
Click to collapse
hey ArchonX,
this is the version of NoCurtains that is working for me:
Related
Do you miss knowing which letters are on which numbers, like when dialing a number from a business? Like, "Call Now! 1-800-YES-YEAH" Here's the fix for Kavana/Ricky/HTC based ROMs.
This is a mod of Surreal Networks Alpha-Numeric Display patch (grey), without the T-Mobile Branding:
Now, with correct spelling. (Hey it was late!)
download BRANDING.GIF
place in the Windows folder
browse to it with resco explorer
rename to ms_mobile.gif, confirm
May require rebooting. You are welcome to modify this, make into a .cab or desktop installer.
UPDATE April 4: Newest version, no branding, simpler install, and works on both the in-call and dialer screens here! Or jump to page three for preview.
UPDATE April 18: One Point Zero release here: http://forum.xda-developers.com/showthread.php?p=2129954#post2129954
Thanks, that's great. Although, you spelled Excalibur wrong...
Thanks a ton! This is a great help!
Nice but I was wondering how the hell to get the panel AFTER you make a call to show the numbers on Kavana's 6.1. Like automated service tells you to put in your name or whatnot on the dialpad....
dialpad cab minus excalibur branding
attached is the same dialpad without the Excalibur branding.
install cab, reboot, enjoy.
thanks to Ben Hirashima for the cab
MountainDrew said:
Thanks, that's great. Although, you spelled Excalibur wrong...
Click to expand...
Click to collapse
Fixed!
Now, I am analyzing how to make a slicker package from Ben's example.
Yianaki said:
Nice but I was wondering how the hell to get the panel AFTER you make a call to show the numbers on Kavana's 6.1. Like automated service tells you to put in your name or whatnot on the dialpad....
Click to expand...
Click to collapse
Not sure. I will look into it. I suppose it could be added to the top of whatever image is in the "next" screen?
So it's only in one colour, and it might not match your blues, but I'll share the one I made for my phone if any of you like it.
I made one too
Windows standard colors
Here are original ones for each of the default colors and Segoe text. No Branding. Included one in grey, too!
Anyone else having a problem with the automatic alpha-num installers with a cooked ROM?
I like the one with T-mobile Branding. It makes the rom feel more official. (Extracted from the Surreal Networks CAB)
ygb said:
I like the one with T-mobile Branding. It makes the rom feel more official. (Extracted from the Surreal Networks CAB)
Click to expand...
Click to collapse
I am working on a complete suite of not T-Mobile Branding, trying to figure out the splash screens at the moment. I just cant dig the pink T; Ive tried! Been cruising the other forums for clues...
It seems that the Ben dialpad works on the in-call screen, but I cant simulate the behavior if i uninstall his cab and manually it the reg. What keys do others use to change background on the in-call screen? IT really needs some livening up anyway.
Profezza said:
It seems that the Ben dialpad works on the in-call screen, but I cant simulate the behavior if i uninstall his cab and manually it the reg. What keys do others use to change background on the in-call screen? IT really needs some livening up anyway.
Click to expand...
Click to collapse
Just one key...but it has to point to a file that exists. So if you've extracted the .gif file from the .cab / make sure you drop the .gif file in the windows directory and note what the .gif filename is as thats what you're going to put in the regitry entry...also make sure you soft-reset otherwise it won't change until then.
And as far as the in call screen is concerned ... look for a file in \windows directory named cprogback_land.png for your in-call screen
Here's the one that i use: It looks good with technology's another blue color scheme .......Just rename the extention from .jpeg to .png if you want to use it
nice tip! thanks!
pudgedaddy said:
...And as far as the in call screen is concerned ...
Click to expand...
Click to collapse
It appears that that file is hard-coded, so there is no way to mod the reg with the installer, but it looks like windows mobile's .cab-install system will back things up alright from a file replacement approach. So, a single installer for both is do-able.
Interestingly, the image I am overwriting is called Carrierlogo.gif, not cprogback_land.png. Are there two potential images retrieved for the call screen, one in the fore and one in the back? I wonder what I could do with that info...
Or, maybe it is named differently in different source roms with the same purpose. Will text that next.
boom, got it
So, I think i this is how the in-call graphics work:
It appears that the call screen does indeed call up two images (not including a contact thumb, if applicable) The background is hardwired as "cprogback_land.png". Also, instead of having the carrier text string at the top, it can have an image across the top, which is hardwired as "carrierlogo.gif". Nothing can be done, as far as I can tell, to change the pointers to other files, so overwrites are the only method of changing.
If the graphic is put inside the background image itself, it can be the full width of the screen, like any background, and likewise any height (up to 213) But the in-call screen is a bit busy.The top 24 pixels (after the window top) are reserved for the carrier branding text string (or image), followed by 2 blank rows of pixels and a horizontal rule at row 27. The next 88 pixels (the middle area is a call status area followed by another rule at row 116, and pressed digits fill the bottom area.
However, if the graphic (.gif only) is in the foreground, it can be any size and proportion, but if it is taller than 24 pixels, or wider than 311 pixels, it will be (UPDATED) scooted over four pixels and cropped to fit a box of those dimensions at the top. If it is smaller, it will be top-, then left-aligned. Either way, if it is there, it replaces the carrier text string, rather than having to be designed around it. One thing to keep in mind, if using this method is that it has to be 10 pixels narrower than the image that might be used on the dialer screen, or it will "shrink" when you switch screens, if you want them to "match".
If anything is unclear, or anyone has any details to add, or corrections to make, please let me know! Thanks
pudgedaddy said:
Just one key...but it has to point to a file that exists. So if you've extracted the .gif file from the .cab / make sure you drop the .gif file in the windows directory and note what the .gif filename is as thats what you're going to put in the regitry entry...also make sure you soft-reset otherwise it won't change until then.
And as far as the in call screen is concerned ... look for a file in \windows directory named cprogback_land.png for your in-call screen
Here's the one that i use: It looks good with technology's another blue color scheme .......Just rename the extention from .jpeg to .png if you want to use it
Click to expand...
Click to collapse
Thanks a lot pudgedaddy we definitely needed better visuals for the call in screen. Does anyone else have any other variations of screens like this laying around?
killswitch said:
...Does anyone else have any other variations of screens like this laying around?
Click to expand...
Click to collapse
One could be made by renaming any wallpaper that would work on the home screen.
I am working on a png one that blends seamlessly with a floating .gif dialpad right now. Must test it out tho'
Here is a trio of images to bring a consistent and mellow dialpad feature to BOTH the dial and incall screens.
Directions
Finally i found the solution for the unsharp tf3d background. Just take a .jpg picture and scale it to 480x800. Then rename it to "HomeBackground.img". Disable touchflo and then copy the file to your windows folder. Enable touchflo and tada!
w00t??? trying it right now
tried it with my current background cant see any difference.. gonna test it with some other backgrounds later
the best results are in 440x640
mine's still the same... probably because i edited the manila file for BackgroundAllTabs?
Doesn't work for me too. The background changes, but it's in the same low quality as always.
mine's still the same...
same problem here!
Verry strang. I have a dutch Rom and i can even rename a picture from 2,55Mb 6104x4448 to homebackground and the picture shows fine but lose some hight en width.
But the thing is, you can get more pixels than the screen has.
edit:
Another thing i just realised, i downloaded the wrong format in te wallpaper thread. I downloaded the thumbnails and not the picture itself. So my screen was always unsharpen with this thumbnail.
Is there no way to make the background as clear as when you preview it in photos and videos? I tried 480x800, 480x640, 440x640...nothing works.
nope 440x640 has no strech issues, but i think quality degradations depends on tflo3d itself
Anyone have the solution?
anyone solution?
It would be great to have full quality pic as background. The quality when looking the same picture on gallery is waaaay much better..
This is so weird that HTC would do this, they make a skin program that is supossed to be better than the WM standard today, and it is in my opinion, and give us the option to have our own background and make it so the background looks crap, why why why.
I would love the answer to this as well.
seal said:
and give us the option to have our own background and make it so the background looks crap, why why why..
Click to expand...
Click to collapse
'Cos touchflo was originally developed for qvga (320x240) devices and was hastily ported to higher res phones.
In other words,
... a lash-up!
actually best quality 4bckg remain apply mun-rus's cab. See link:
http://forum.xda-developers.com/showthread.php?t=479112
The pro of this method is same high quality of jpeg file used for home tab.
Minus are the applied modify to 1c68...manila. For new analog clocks (ex. Nisse's clocks) it was modify also same 1c68...manila.
So it dipends of u goal....
If u like to have an high quality 4bckg, then install mun_rus cab, but not install any analog clocks, because 1c68...manila is not compatible for analog clocks.
Otherwise if u don't care of any quality bckg, then u can install any analog clocks.
Thanks but we're talking about the home background's quality, not about the quality of other TF3D tab's backgrounds.
Home background's quality is poor : even an excellent jpeg in high reolsution becomes unsharp as a TF3D home's wallpaper like it was already said, that's the point
it looks like they take tf3d from diamond and put in to hd even the square's in the original background are not till bottom if you install diamond theme it will be looks the same like original theme
this is SAD !!
phone make in rush ???
Why XDA's programmator not resolve this problem?
Took me a bit of searching to find all this info but the fixes for the stripes and the aspect ratio are all on here already... Just thought I'd put what I learned all in 1 place, as it seems to work for me
Got this info from Snootch's post here: http://forum.xda-developers.com/showpost.php?p=3038572&postcount=50
The 4a087e41_manila file by NisseDILLIGAF: http://ycyvpg.bay.livefilestore.com/...anila?download
The resizing instructions written by Bbonzz http://forum.xda-developers.com/showpost.php?p=3110028&postcount=2
And the fixed 5c9aa261_manila file found here from 6Fg8 http://forum.xda-developers.com/showpost.php?p=3068310&postcount=60
You need:
- Manila editor v0.2: http://forum.xda-developers.com/atta...7&d=1219251626
- Manila file by NisseDILLIGAF: http://ycyvpg.bay.livefilestore.com/...anila?download
- First two lines of Hex code by NisseDILLIGAF: http://ycyvpg.bay.livefilestore.com/...20HEX?download
- A 480x800 background pic
- A Hex editor program such as XVI32: http://www.chmaas.handshake.de/delph...vi32/xvi32.htm
- Photo editing software such as Photoshop
- The fixed 5c9aa261_manila from the bottom of this post
- Total Commander or Resco installed on your phone (Total Commander: http://www.ghisler.com/)
Take original 480x800 image
Cut 112 pixels from top bar, and 52 pixels from bottom (480x636)
Stretch image to 460x512
Add extra 52 blank pixels to right of image to make image 512x512
Save as .png
Open 4a087e41_manila in manila editor
Replace image with 512x512 .png you just made
Close editor
Open 2 instances of XVI32 side by side
In the first open 4a087e41_manila file, in the second open First 2 lines of hex code file
Copy details from First 2 lines of hex code to 4a087e41_manila, then save 4a087e41_manila
Pick up your phone and go to Start>Settings>Today and click the "items" tab at the bottom. Uncheck Touchflo3D and click "ok"
Send 4a087e41_manila and fixed 5c9aa261_manila files to Touch HD
Use Total Commander to copy files from My Documents to /Windows folder
Restart your phone
Go back to Start>Settings>Today and click the "items" tab at the bottom. Check Touchflo3D and click "ok"
The nocurtains.cab and transparantslider.cab both work for me too except on the tabs I have a black curtain behind the top writing (see 2nd screenshot).
Again I'd like to say thanks to all the people that cracked these manila files and fiddled with image dimensions to get the aspect ratio right. I have absolutely no knowledge of Hex editing or what a manila file even is so I rely on you guys!
hi, from where did you get the color icons bar on top of screen? I installed also color icons but these are looking much better!
thanks
fabien
Those look like TSowen's top bar from the taskbar thread in the Diamond forum. Have them on my HD also. v5.5. Dont like the battery in v5.6.
Shetlander said:
Those look like TSowen's top bar from the taskbar thread in the Diamond forum. Have them on my HD also. v5.5. Dont like the battery in v5.6.
Click to expand...
Click to collapse
They are indeed TSowen's, but from his latest 4 series (4.1.6?). The battery looked terrible though so that's Darklord69's fixed v2 bat icon on mine.
millski said:
They are indeed TSowen's, but from his latest 4 series (4.1.6?). The battery looked terrible though so that's Darklord69's fixed v2 bat icon on mine.
Click to expand...
Click to collapse
Can you post the link please ?
Hi millski,
I have to say that your instructions are just PERFECT!!!
Thank you very much
Georgeous2008 said:
Can you post the link please ?
Click to expand...
Click to collapse
TSowen's custom sets are here: http://forum.ppcgeeks.com/showthread.php?t=54514&highlight=custom+icons with instructions.
Darklord69's battery icon is here: http://forum.xda-developers.com/showpost.php?p=2858589&postcount=324
Keep an eye on the thread Darklord's icon is in as it seems to be updated with new icons every day...
millski said:
TSowen's custom sets are here: http://forum.ppcgeeks.com/showthread.php?t=54514&highlight=custom+icons with instructions.
Darklord69's battery icon is here: http://forum.xda-developers.com/showpost.php?p=2858589&postcount=324
Keep an eye on the thread Darklord's icon is in as it seems to be updated with new icons every day...
Click to expand...
Click to collapse
Many thanks! Had the Darklord battery and icons, however, the TS Owen icons are so much nicer.
can someone tell me how to cut pixel?
Hey guys,
is this thread up-to-date?
At my german HD I did´nt find the file "4a087e41_manila" at my windows folder. Only the file "5c9aa261_manila" is there.
@millski: All deeplinks at your first post are broken. Can you please fix them?
Greetings
nick
This thread is ancient, look at mun-rus's bg4all thread and the threads by bcrisp82, maranello etc for newer, better fixes
Hey
wanted to know if the WM6.5 allows you to use full res and quality wallpaper?
not like on the regular HD wallpaper that shows only 512X512...
tnx =]
WM 6.5 allows you to use full screen images and they are crystal clear.
liav12 said:
Hey
wanted to know if the WM6.5 allows you to use full res and quality wallpaper?
not like on the regular HD wallpaper that shows only 512X512...
tnx =]
Click to expand...
Click to collapse
It's not WinMo that's causing the problem with Touch HD background wallpapers, it's Touch Flo 3D.
So, if you would disable TF3D you could probably get nice quality with WinMo 6.1.
I have been digging around this issue and I do have a solution to get full resolution wallpapers with TF3D. Unfortunately, this process now requires a lot of messing around with Manila files, so it might not be for everyone. But I'm thinking about publishing my custom Manila wallpaper files, which basically require simply copy+paste into Windows directory and then restarting TF3D.
Rozenthal said:
It's not WinMo that's causing the problem with Touch HD background wallpapers, it's Touch Flo 3D.
So, if you would disable TF3D you could probably get nice quality with WinMo 6.1.
I have been digging around this issue and I do have a solution to get full resolution wallpapers with TF3D. Unfortunately, this process now requires a lot of messing around with Manila files, so it might not be for everyone. But I'm thinking about publishing my custom Manila wallpaper files, which basically require simply copy+paste into Windows directory and then restarting TF3D.
Click to expand...
Click to collapse
That would be great.
I hate how the quality is degraded once you set the Wallpaper.
There is so much difference in quality when viewing a picture in "albums" as opposed to the home screen wallpaper.
I wonder why TF3D lowers the resolution on the home screen.
Please publish a solution. thanks
bigjee said:
That would be great.
I hate how the quality is degraded once you set the Wallpaper.
There is so much difference in quality when viewing a picture in "albums" as opposed to the home screen wallpaper.
I wonder why TF3D lowers the resolution on the home screen.
Please publish a solution. thanks
Click to expand...
Click to collapse
I actually started a thread in General > Dev and Hacking about this very issue. It didn't get a lot of attention from people with Touch HD's, but none the less, I managed to get down to the bottom of the mysterious TF3D behavior and I can see that the info from that thread got to the people working on visual enhancements for Touch HD.
Basically, it's insanely stupid solution some lazy HTC programmer implemented.
Imagine that TF3D can display images that have maximum size of 512x512. Now imagine you have screen size that's 480x696 pixels (this is how big the wallpapers are). See the problem? The maximum image you can use is 184 pixels short to cover the whole screen.
And then you get a genius idea to use two 512x512 images to cover the screen area and allow full resolution wallpapers to be used. So you take the default HTC wallpaper, split it in two parts, align them perfectly on the screen so it looks as if they're one image - and problem solved!
Right?
Well, not quite. Yes, it will work for default background image, but what about custom wallpapers? Well, they were too lazy to make an automatized script that would split the images in two and align them on the screen.
Instead, they opt for a more convenient solution in form of taking custom wallpapers, shrinking them down into a single 512x512 box and then stretching this downsampled image back to 480x696 area.
And that's whats causing all these problems.
If you want a temporary solution, create 512x512 image - I bet it will look sharper then your 480x800 image.
A true solution is to cheat TF3D and import manually FOUR separate images that together form portrait and landscape wallpapers.
This can be done, and I will explain it in a separate post here when I get some free time. At the moment I'm too busy with FingerKeyboard
Wow, Rozenthal! That would be very interesting! It´s almost a dream I have: to see a quite sharp image on my TF3D Home screen.
A lot of people would be very glad with you if you teach us how to do this.
Thanks a lot in advance
It's not a dream I have it on my screen now...
The problem is in the fact that changing skins cannot be done through Settings tab. It requires editing the appropriate Manila files by using a Manila graphic editor on your PC. Also, this is something that will require at least moderate knowledge of some good graphic editing software (read: Photoshop), because you need to manually prepare split png files for portrait and landscape.
Then you take these files, load them into Manila files, compress them into a special TF3D graphic format, copy them to Windows directory overwriting the old files, turn off TF3D and then pick "Use default wallpaper" in your Settings / Wallpaper tab.
So, it's major pain in the a$$, and it's not something you would be doing on the road, or every day. But, as I said - it CAN be done.
The way I see it, we could probably get some users here to team up, learn the procedure and then simply offer zip-ed Manila files that other people can download and copy into Windows folder. That part is easy, it can be done by anyone. Preparing the wallpapers, however, isn't that simple.
Anyway, I will try to make a tutorial on how to do all this tomorrow.
In the mean time, you can check the thread I mentioned earlier. Altough, be warned that some of the final conclusion posts from that thread were lost during last sunday hack attack on XDA.
Is Possible to use this Mod of the WM6 startmenu in our minis?
Here's the link
http://www.xda-developers.com/windows-mobile/windows-phone-7-start-menu-for-wm-6-5-x/
-kOS- said:
Is Possible to use this Mod of the WM6 startmenu in our minis?
Here's the link
http://www.xda-developers.com/windows-mobile/windows-phone-7-start-menu-for-wm-6-5-x/
Click to expand...
Click to collapse
Yes, but this is for WVGA screen, just adjust the values for HVGA
m!k3 said:
Yes, but this is for WVGA screen, just adjust the values for HVGA
Click to expand...
Click to collapse
Plss smeone help me how to make it work...i installed and turned off my phone and turned it back on but nothing happened...
m!k3 how to adjust the values for HVGA???
in the cpr file, all values are set for WVGA (480*800)
Test this cab and say me if you see a difference!
good, i see the difference, but this is very ugly lol
I can re set the value for hvga
Enjoy!
Plz feedback
Edit: 2nd cab is with any bug correction
Hello ppl,
I used it, it works really nice. 3kb cab file... so simple..
.. here are some pics as looks on my system.
I used a dull gray backgound for pictures..
You can drag and drop the elements in the position you want in order to set up order.. that works pretty fine.
Now, question is, any possibility to have bigger characters on the screen ? as this looks too small.. or at least to have them in one line only ? not white / yellow thing as on the screen ? only white and bigger - similar to windows default theme ? maybe more spaced.. but definitely larger characters.
Brgds,
Radu
tzoller said:
Hello ppl,
I used it, it works really nice. 3kb cab file... so simple..
.. here are some pics as looks on my system.
I used a dull gray backgound for pictures..
You can drag and drop the elements in the position you want in order to set up order.. that works pretty fine.
Now, question is, any possibility to have bigger characters on the screen ? as this looks too small.. or at least to have them in one line only ? not white / yellow thing as on the screen ? only white and bigger - similar to windows default theme ? maybe more spaced.. but definitely larger characters.
Brgds,
Radu
Click to expand...
Click to collapse
Yes it's possible, the white or the yellow?
v2.. biggest fonts
hi,
if you ask me, i would like to have white letters only.
similar size, a little smaller than theme.
ideea would be to look consistent with theme default.
maybe...the "loupe" effect is it possible?
regards,
radu
tzoller said:
hi,
if you ask me, i would like to have white letters only.
similar size, a little smaller than theme.
ideea would be to look consistent with theme default.
maybe...the "loupe" effect is it possible?
regards,
radu
Click to expand...
Click to collapse
What's the "loupe" effect?
This a simple css not a app. The fonts it's the original windows.
Just the white font it's possible. In same place but little smaller?
Hello again Mike,
Here are two pictures of actual look and what i think would look better.
Is about taking out the yellow writing all together, it does not make sense to have same thing written twice, it looks cluttered.
Unless, let's say, if there is a folder which has more than one icon inside it, like for example the Tools or Settings folder. There will have to have the big white letter for title and in yellow letters, below, the content of the folder.
Size of the yellow letter seems fine for me.
As for the white letter, maybe one single size increase, like from Tahoma12 to Tahoma 13 ( and/or bolded ) so that would look closer to original windows default theme. But, not too much as it looks now, "Microsoft My Phone" is very long and would go out of the screen on the right side..
My ideea would be to have same aspect once navigating in between main theme and control panel.
"Loupe" effect, is the highlight ( or magnify lens ) that is placed on the active icon, like the effect for the clock tab, in the main theme. Or can you replace this with a underline for the title... i do not know if this is even possible..
regards,
Radu
PS: i would be really happy if i knew to tinker code here, not to bother you..
LE : started reading the post in original thread, maybe the yellow text can remain but made smaller to resemble tooltip description... small text that you really need to look closer to understand the meaning of the title if not displayed correctly...Somehow to differentiate title from description and create impression of separate "paragraphs", if that is right term.
tzoller said:
Hello again Mike,
Here are two pictures of actual look and what i think would look better.
Is about taking out the yellow writing all together, it does not make sense to have same thing written twice, it looks cluttered.
Unless, let's say, if there is a folder which has more than one icon inside it, like for example the Tools or Settings folder. There will have to have the big white letter for title and in yellow letters, below, the content of the folder.
Size of the yellow letter seems fine for me.
As for the white letter, maybe one single size increase, like from Tahoma12 to Tahoma 13 ( and/or bolded ) so that would look closer to original windows default theme. But, not too much as it looks now, "Microsoft My Phone" is very long and would go out of the screen on the right side..
My ideea would be to have same aspect once navigating in between main theme and control panel.
"Loupe" effect, is the highlight ( or magnify lens ) that is placed on the active icon, like the effect for the clock tab, in the main theme. Or can you replace this with a underline for the title... i do not know if this is even possible..
regards,
Radu
PS: i would be really happy if i knew to tinker code here, not to bother you..
LE : started reading the post in original thread, maybe the yellow text can remain but made smaller to resemble tooltip description... small text that you really need to look closer to understand the meaning of the title if not displayed correctly...Somehow to differentiate title from description and create impression of separate "paragraphs", if that is right term.
Click to expand...
Click to collapse
WOW lol
Sorry your post is complexe for me, my english is not better for understand you lol
For the code, no prob use the 2 files in attachement. For edit use notepad++ and replace the original in windows folder and softreset.
Tahoma 13 is the font of titanium? it's not a probleme for replace the font in start menu.
Thank you man, that's what i want, also i see this become a very useful post.... nice!!
Hello Mike,
Maybe i'm too dumb for this...
Can't edit file in pda... is opened already ??
Nor can copy/paste - have no rights...
Can you manage to make the package once again, but without yellow characters, at all ?
Regards,
Radu
tzoller said:
Hello Mike,
Maybe i'm too dumb for this...
Can't edit file in pda... is opened already ??
Nor can copy/paste - have no rights...
Can you manage to make the package once again, but without yellow characters, at all ?
Regards,
Radu
Click to expand...
Click to collapse
Ok,
Without the yellow fonts and portrait and landscape.
Hello M!k3,
It works, very nice and very simple.
Thanks for patience.
Here are some pictures in real life.
regards,
radu