Related
Sorry if this has been covered before, I've been searching the threads for quite a while though only came up with those having problems with standby freezing.
So I have a 838pro, running Elf 2.1 - Clean! -- Connected to exchange 2007 (push) 3g/HSDPA. This works great -- except I cannot go far from a charger since my pda will not enter standby mode.....(unless i hit the power button - this works fine, and so does resuming) -- Every thing is great except it drains the battery like no tomorrow.
Not running wifi or bluetooth. 3 Network in Australia.
If I kill the activesync service it will standby as set by my power settings (1min power/30sec screen)
Would my exchange server be playing funny buggers?
I've tried a couple of different roms (black etc) and all seem to have a similar problem.
Running 1.41xxx radio / hard spl v7;
Any ideas?
Cheers.
Since yesterday, I've down graded to my Networks current rom (which is 1.30 vm5) and standby works fine.
Tonight I will re-flash to a wm6 rom and see if it helps (e.g. not changing the radio rom back to 1.41)
The rom I got is specifily for my network so call quality is actually better than 1.41 - with regards to range/data -- too early to tell.
Cheers'
Snoops said:
Since yesterday, I've down graded to my Networks current rom (which is 1.30 vm5) and standby works fine.
Tonight I will re-flash to a wm6 rom and see if it helps (e.g. not changing the radio rom back to 1.41)
The rom I got is specifily for my network so call quality is actually better than 1.41 - with regards to range/data -- too early to tell.
Cheers'
Click to expand...
Click to collapse
My phone has never gone into standy while using Push from the exchange server. Once I make it sync every 15 minutes it seems to be able to turn the screen off.
Rob
Well about half way thru today it started doing the not sleeping thing. So tonight I re-installed elf and tried using push with an exchange 2003 server (I am not sure of services packs etc, as the exchange 03 server isnt hosted locally).
So now it has been running for about 4 hours without any problems. It must be a exchange 2007 thing.. Maybe the keep alive packet??
Any Ideas?
same issue here
I noticed since I set up DeniaL's Exchange 2007 service, my battery life went into the toilet. My bro in law was comparing phones (he has a Hermes too) and asked why mine never went into standby... Battery problem discovered... Ideas anyone?
Does Denials owa access use http or https?
(e.g. when you setup your exchange server do you leave the ssl option ticked?)
After having a little time to play around.. I think (might) of found the issue.. Syncing over a http connection seems to be the problem for me. Switching to ssl seems to fix the issue... -- Will update in a two or two after more testing
I have been thinking about this for a while so I will go ahead and get it started. We all know that Tom_Codon is currently working on V 4.0, and as always he will thoroughly test it before release. I thought maybe we could, as a community, come to a conclusion on the fixes for the upcoming rom.
We all know the problems such as
1. Dialerpad not working for redial( green button) different dialerpad fixed
2. Flashing issue that was resolved.
3 HTC plugin going to vibrate during appointments- not a rom problem but an issue
4. Weather for "your town"- not a rom problem but an htc server issue.
We need to get together a complete set list,if you will, of known issues so that these bugs can be worked out before the Rom hits "production".
PLEASE, dont turn this into a request thread. Lets make an effort as a community to help Tom, put out the best Rom of his ability.
I have talked with him recently and he feels that the Touchflo is working flawlessly, but this is going to be a completely new build, from a new version of windows 6. So there MUST be some test time
I think as a group we can pitch in and give some targets to look at, via our experiences with 3.7
On another note, many people have donated to Tom, but the truth of the matter is more have not. I understand that times are hard, for some, harder for others, but we should look at it like this, If Tom wasnt doing what he was doing, along with others like him(none have released anything as complex and mature as Toms) werent doing what they are doing, you would already be in the market for another ppc, some, like here in America, having to pay upwards of $550.00 like myself.
Some of us appreciate the hard work of others and are willing to cough up $ without much proding, while others just download and go. I myself am guilty of such actions, I mean I do have and have had a usenet account for about 3 years, and have used bit torrent since it was in command prompt days(bit commet anyone) but I do recognize hard work and a love for what one is doing, so please make Tom feel your appreciation, this guy is having to go way out of his way to do research for us, due to internet issues, so please donate to Tom's work. Drink one less caramel mociado,beer or coke for that matter and send some $.
Back on topic.
Please help by posting any known issues with 3.7 so 4.0 can be tested properly, Thanks.
I agree with 1 to 4 in the previous post, also, the dialer writes text in green, this is very hard to see and suggest changing to white text.
5. Dialer text changed to WHITE for easier reading
Another Issue
First of all Congrats to Tom for making the bes PPC a million times better.
I had some issues, besides the redial button some programs crash my machine, for example yahoo go 2 and others.
Also the machine sometimes restarts itself with programs like tomtom and google.
Thanks for all your hard work!!!!!
5 good point, I am sure that will or has been changed already
yahoo go... what others, lets try to make a thorough list
6. Inclusion of TouchFlo cab
(The dialpad was really a big issue in my friend's phone i upgraded, so had to go back to B&B 3.0)
Thanks for all ur great efforts Tom!
I fully agree with post 1.
The only thing that is not working for me is the camera.
Gpsphoto is not working for me. Gps is not turning on.
And the colors of dailpad. They are now green but difficult to read.
White is much better.
For the rest it runs perfect.
But please Tom take your time.
And guys the rom is for free so donate to Tom. Mobile Telco's have to pay Microsoft for this update. And we get this for free.
I haven't donated as well but i will this week.
There is a workaround for GPS Photo. Just change to main memory as storage. Then restart the camera and off you go Nasty thing is that you have to do this every time you want GPS photo. It's a ROM issue and has nothing to do with Tom
[email protected] said:
5 good point, I am sure that will or has been changed already
yahoo go... what others, lets try to make a thorough list
Click to expand...
Click to collapse
Hi all,
my only (not so big) problem in B&B 3.7 that I wonder to be solved in the new version is the camera delay problem, when I push the button it takes about 3-4s for the camera to take te photo.
The other issue is pics destination folder. My old ROM saves the photos to \storage card\my docs\my picture, that was very nice, this new camera saves the photos to a specific folder, it's not a big problem, just annoying...
By the way the B&B 3.7 is the best rom what I've ever tried, so Tom, appreciate your work...
Hi!
I don't know if I'm the only one, but when I desactivate the WM5storage apps by clicking on "desactivate", it runs TOMTOM automaticaly!
It can be a bug...
@++
TraXer.
Taking a picture in 3.7 takes about 3 seconds.. Still can't fix that..
Wi-Fi issue
Hi @all,
the B&B 3.7 is the best ROM i ever had. Thanks to Tom.
I've an issue with the Wi-Fi start/stop.
I can start and stop Wi-Fi with the comm Manager but if I start Wi-Fi I could not stop Wi-Fi over the Wi-Fi icon on the Headerbar.
Normaly there is a link if you click on the icon [Turn on Wi-Fi] if its off and [Turn off Wi-Fi] if its on.
I have always [Turn on Wi-Fi]... also if its on and if i click, nothing effects.
I don't know if someone else solve this problem and if its a bug.
Cheers
[email protected],
First of all, i would like to express my eternal gratitude for tom who is doing a great work. People like you makes the community better and better.
I have another issue:
when using de X-Button, the rest of icons of the heather bar doesn't show properly. The signal power of the operator displays only left half and he volume icon doesn't show.
make a contact picture also does not work: not file is saved after shotting
Agree
I agree with you and i would like to donate to tom. But i need account information, i don´t use paypal.
However i have not been abel to use Tom´s 3.7 ROM at all. No problem flashing it but my sound on bouth, my HTC P3300 goes balistic (like if my botton was stock)..
This has happend everytime i tryid this ROM and i tryid it on my too. P3300 and my body´s too..
So i haven´t realy enjoyed the ROM at all.. just tryid it and shiftet to the new WW3.7 Original (which works flawless on my phones)
.... but still i would like to support the great work and research Tom is doing.. Please make it possible by posting som account information so i can transfer a donation to you Tom
i only tried 3.7 for a short time because i had the battery drain problem, and the redialing problem was getting on my nerves.
however, there were 2 problems (or 2 times the same) that i also have in v3.0 (german version):
wlan and gps connections cant be deactivated using the taskbar icon. the "bubble" always says "no connection".
for wlan, i use connection manager to disconnect. that works perfectly. to stop a gprs connection however, i have to switch to flight mode and back...so:
7. (or whatever) would be nice to have a more confortable way of disconnecting gprs than using flight mode...
to stop a gprs connection however, i have to switch to flight mode and back...so:
Click to expand...
Click to collapse
I haved the same problem but after looking close all the app (like msn messenger) who use Gprs Data and with com manager you can stop it ^^
More problems, possibly unreported?
I have a couple of issues with 3.7, and I don't think I have read about them anywhere else.
Firstly, this may be a problem with the Comm manager. Sometimes I turn the phone to "off" in Comm. Manager, and then when I click again to turn it "On", nothing happens - the code lock keypad is supposed to show but nothing happens at all and I have to soft reset.
Secondly, after a soft reset, MSN contacts do not appear in the list when you login, and you must chage accounts to see them again
I also had the more common problems with green button and HTC home screen vibrate mode.
Also would it be possible for us to have Windows Update inlcuded in the ROM?
Excellent ROM though by the way! Will be donating very soon!!!
Tristan
morpheustfw said:
I haved the same problem but after looking close all the app (like msn messenger) who use Gprs Data and with com manager you can stop it ^^
Click to expand...
Click to collapse
yeah, you are right. i just tested what you said, and indeed: the "Datenverbindung" button in comm manager (i got german version) will eventually light up when i switch to conn manager and a gprs connection is active. but it takes something between 3 and 10 seconds for that button to light up. that's why i never saw it.
but waiting for the button to light up then clicking it will indeed cancel the gprs connection. i am cool with that. thx for the hint.
Actually this started as a B&B 4.0 issues thread...
but i really would like to thank the person who open it because i had the opportunity to see all the bugs of previous versions in one place....
Thanks again...
Many thanks to Tom as well for his effort..
Looking forward for v 4.0
I believe we are on the right track, but I feel some of theres issues are problems do to the base OS..I will later update my most and include a pool to see where we stand as far as how may people are experiening these situation.
After installing Hard SPL 2.0, ATT radio 1.5.4, and Pays 6.1 i have the following problems, have searched for a few days now and still havent found anything.
I installed a CAB to set up my phone for ATT service, now i can recieve email, get online and Download MMS. SMS is fine. I can even use internet sharing perfectly. (although OUTGOING email also doesnt work when teathered.) Everything else is good besides:
No Camera, No Flashlight, No Superbright. Cannot SEND email via smtp with auth. Tested the smtp from my pc (not teathered) and it works fine.
If anyone even has this problem, make me feel better that im not the only one. I have tried flashing to different ROMs and camera has never worked since 6.1 flash. I also installed radio version 1.4.8 and still coulnt send email. - could this be my internet settings?
Thanks to all who can help!
enjoithis said:
After installing Hard SPL 2.0, ATT radio 1.5.4, and Pays 6.1 i have the following problems, have searched for a few days now and still havent found anything.
I installed a CAB to set up my phone for ATT service, now i can recieve email, get online and Download MMS. SMS is fine. I can even use internet sharing perfectly. (although OUTGOING email also doesnt work when teathered.) Everything else is good besides:
No Camera, No Flashlight, No Superbright. Cannot SEND email via smtp with auth. Tested the smtp from my pc (not teathered) and it works fine.
If anyone even has this problem, make me feel better that im not the only one. I have tried flashing to different ROMs and camera has never worked since 6.1 flash. I also installed radio version 1.4.8 and still coulnt send email. - could this be my internet settings?
Thanks to all who can help!
Click to expand...
Click to collapse
Did you flash to a stable ROM (eg original WM 6 ROM) before fashing Pay's ROM? My two cents; try flashing your phone again, this time flash to an original wm6 ROM like a AT&T ROM, soft-reset before customizations start, then flash Pay's ROM. Hope this helps.
Soft reset before customizations start?
When the phone turns on for the first time after flash - before the customization screen? Is that what is meant by that?
I would definatly flash to an offical AT&T ROM and then see what happens..
I had installed the official WM6 rom - camera did not work. Did not set up email so i dont know if that worked. I also installed a custom ATT specific rom which camera did not work.
Why would i have all other types of internet access except outgoing email?
Camera problem
I get that from time to time on my 8525 (Hermes). The fix is simple, unplug the phone from any power source, pop out the battery, wait about 20-30 seconds and place the battery back in.
In the old "PDA only" world, this is what we'd call a Battery Reset. More effective than a Soft Reset and not as drastic as a Hard Reset.
When my 8525 (Hermes) Camera stops working, as well as the flashlight and all, I do this little trick and it fixes it every time.
I hope this fixes things for you!
I am having the same problem with my 8525 running pays rom tried everything still can't send email. tried flashing to an official att rom same problem problem started only after i flashed to pays rom....help.
Camera problem
I Flashed my XDA Stellar with supposedly the official wm6.1 rom. Now my TOM TOM takes forever to get a fix and although my camera still takes pictures, there is no view finder image to show me what im looking at. Dissapointing.
hello,every one
Hello everybody,my name is fantasyer,glad to be here,and gald to be part of you.To be a freshman here, like most of you, I feel excited and a little nervous as well, I hope we can look after each other and enjoy the four years in university.I had learn PS. I am a very outgoing young guy/girl, as all you can see.
I love basketball, if any of you have the same hobby as I do, I would be very happy to have discussions with you.I hope you all can remember me,fantasyer happy guy ike the sunshine. Glad to be your friend, thank you
Hello together,
i have tested many roms from here with WM 6.1 but all (WWE and GER) Roms doens't work with an exchange sync. All WM 6 Roms are run fine, WM5 teh same but all WM 6.1 doesn't sync. I became allways the same error message in activesync.
Error Code: 85010013
Some people wrote me an PN that the problem is:
- this error comes if the DeviceEncryption.dll and its related registry entries are missing.
- That problem may exist if the developer has removed Enterprise from the ROM. Those modules are needed for the Exchange syncing
Can anybody tell me, if there is a chance to create an WM6.1 ROM that works with the exchange server?
No Problem syncing with Exchange 2007 with cme light ROM:
http://forum.xda-developers.com/showthread.php?t=430394
esackbauer said:
No Problem syncing with Exchange 2007 with cme light ROM:
http://forum.xda-developers.com/showthread.php?t=430394
Click to expand...
Click to collapse
i have tested this rom today, i can't sync with exchange.
Many people doesn't have problems because the exchange setting are not so strong. there is a flag called "allow non-provisionable device", when you turn on this sync works fine but not when it is off. But, it is a security leak when this setting is on!
kandalf said:
i have tested this rom today, i can't sync with exchange.
Many people doesn't have problems because the exchange setting are not so strong. there is a flag called "allow non-provisionable device", when you turn on this sync works fine but not when it is off. But, it is a security leak when this setting is on!
Click to expand...
Click to collapse
Then your server is configured for good reason in this way.
You want to access the server with a ROM which might be potentially unsafe, because it was cooked by some anonymous guy on the internet, whose intentions are unknown.
I guess it is the needed certificates that the cooks dont want to pay for.
esackbauer said:
Then your server is configured for good reason in this way.
You want to access the server with a ROM which might be potentially unsafe, because it was cooked by some anonymous guy on the internet, whose intentions are unknown.
I guess it is the needed certificates that the cooks dont want to pay for.
Click to expand...
Click to collapse
can i solve the problem?
what is with all the self cooking wm6 rom's. the are running all fine! it can't be a certificate problem or?
Mary 3.7 Lite No Flow
Hi, I still find Mary 3.7 is still the best for MS Exchange Sync - for provisional device (have not tried 3.7.1) http://forum.xda-developers.com/showthread.php?t=369917
Kandalf,
I faced same problem as yours. I am using Samsung i780 with WM6.1. Do you find any solutions to add those security components?
Thanks,
Young
cyyp said:
Kandalf,
I faced same problem as yours. I am using Samsung i780 with WM6.1. Do you find any solutions to add those security components?
Thanks,
Young
Click to expand...
Click to collapse
no, it's not running. we have some new htc devices with an official wm 6.1 rom and these devices works great, but not my Vodafone compact GPS.
kandalf said:
no, it's not running. we have some new htc devices with an official wm 6.1 rom and these devices works great, but not my Vodafone compact GPS.
Click to expand...
Click to collapse
Yes, I got some new htc devices with official released WM6.1 and they are all working fine. Really want to find out what's the different between them.
Morning all.
I'm a long-time reader, first-time poster, but I thought I'd share some further findings on this. I've been having similar troubles and have been playing with this for a few days. All cooked 6.1 roms I tried were refusing to work with Exchange 2007, returning the infamous 85010013.
It seems to have been established here & elsewhere that the "Device not provisioned" is causing it, and more specifically the Remote Wipe functionality. Assuming that your organisation isn't willing to not implement this on every phone containing business data, a workaround is needed.
As part of the initial phone setup, you're prompted to set a pin number. After testing, I've found that setting a pin number scuppers the phone provisioning every time. With every test since, skipping this initially and waiting to be prompted to do it when you're asked to enforce the security policy when first connecting to the Exchange server gives no problems whatsoever.
Hope this helps somebody...
Fishbowler said:
As part of the initial phone setup, you're prompted to set a pin number. After testing, I've found that setting a pin number scuppers the phone provisioning every time. With every test since, skipping this initially and waiting to be prompted to do it when you're asked to enforce the security policy when first connecting to the Exchange server gives no problems whatsoever.
Hope this helps somebody...
Click to expand...
Click to collapse
No, i never set the pin at initial phone setup. I always set then pin at the first connect to exchange. I have already the same problem.
So, did the above solution work for anyone? What PIN does he mean? The pin from my SIM card?
Not syncing with Exchange Server - Error 85010013
On my TMO Wing I can flash Touch-IT_v4.4_Stuffed-RUU or Touch-IT_v4.41_Lite-RUU Roms and I am successfully syncing with the Exchange Server.
When I try other ROMs like Touch-IT_v6.1.3_Clean_UC or ITsPapaFinal_Wing (or any PADVIET ROMs) I get error 85010013 when attempting to sync with Exchange Server.
Since it works on some cooked ROMs and not all cooked ROMs I can't see that it's a setting on the Exchange Server. Logic states that there is a difference in the some (perhaps wm6.1) ROMs that is causing the malfunction in syncing with the Exchange Server.
Admittedly, I no very little about programming but I will continue to fish in the dark to learn more about this problem. There are several fantastic chefs here and I'd like to use their ROMs but I need the email to sync for my work.
additional info
I have the same 85010013 problem. Just flashed a new rom and tried to setup exchange. Got the error. Restored from a Sprite backup (level 2) and this added a second exchange server to the list. This one sync'd while the original did not. Deleted the original and then everything seemed fine.
This leads me to believe that it must be something in the Active Sync setup, since at the same time one worked and one didn't Still researching, but wanted to throw this bit of info out there.
Any luck? I hope we can figure this out. How can I get a second Exchange server in my list? SpriteBackup seems dangerous to me...
AAAHHH, i tested several new roms. WM6.1 and WM6.5
All are not working with exchange. Always the same error.
Which WM 6.1 or WM6.5 ROM ist working with the Trinity and Exchange?
hi, im using osavioro's [ROM][WWE] Windows Mobile 6.1 5.2.20270.1.3.1 Ver. 0.4.7.5 at the moment, active sync works perfect with our exchange 2007 over
wifi, gprs. however direct push need gprs to work.
tried several other 6.1 and 6.0 roms and they also worked as long as you have a valid certificate on the server, i fortunate never had any trouble with this.
(when i finaly realized i needed a valid certificate, not self signed)
we have many other devices syncing to the same server as well, iphones3g, wm5, wm6, 6.1. sony ericssons phones (xperia) etc..
allanredo said:
hi, im using osavioro's [ROM][WWE] Windows Mobile 6.1 5.2.20270.1.3.1 Ver. 0.4.7.5 at the moment, active sync works perfect with our exchange 2007 over
wifi, gprs. however direct push need gprs to work.
tried several other 6.1 and 6.0 roms and they also worked as long as you have a valid certificate on the server, i fortunate never had any trouble with this.
(when i finaly realized i needed a valid certificate, not self signed)
we have many other devices syncing to the same server as well, iphones3g, wm5, wm6, 6.1. sony ericssons phones (xperia) etc..
Click to expand...
Click to collapse
Hm, this rom is not working with our exchange server.
new htc devices with origanal wm 6.1 are all working fine with the same server and the same certificate. Only the self cooking rom WM 6.1 and WM 6.5 doesn't work. WM 6 Roms are running.
Hi,
Has anyone found a WM6.1 cooked ROM that works around this problem yet? My organisation upgraded to Exchange 2007 and I had to downgrade back to a stock WM5 ROM to keep being able to sync...
I don't know exactly what are the "Enterprise components" that someone mentioned, but is it that difficult to cook ROM versions that keep these in place?
Thanks in advance!
try turning off extended networking selection in the USB connection option
Mainly I would love to hear if there are Roms out there optimized for SIP. I am open to third party solutions such as Fring or Nimbuzz or anything else to get reliable VoIP SIP over 3G and Wifi.
[Edit:]
executive summary
Device: Vodafone VPA Compact III (warrenty swap model)
Radio ROM: 1.56.70.11
ROMs: different stable 6.1 Roms
(MRH 9.0 Valerian, CRCs v13.4 , joshkoss Manila2D 21501 and kareem9nbas RevROMv7)
Software: CRCs VoIP support via Device Update
Problem: When calling from landline to SIP on Hermes (powersave status) the Hermes locks up. Hermes receives call and shows, but doesn't ring, LCD backlight stays off. Landline signals that phone is ringing. Need Softreset to get Hermes back to working.
[/Edit]
Hello,
first of all I want to thank all the awsome cooks here. I am new and this is my first post. I went into flashing a couple month ago. I have to say it is really astonishing to have a community so alive and well around such an old device as the Hermes. And how much work hours go into it by all the individual cooks. Pretty impressive IMHO.
I wanted to make VoIP work for me and decided to try my own little Hermes, since I already got one and have already flashed a custom Rom onto it. This is where my troubles began. I don't want to bother you with the whole story. The results:
I tested some 6.1 Roms with the build-in Voip using DeviceUpdate by CRC to install the Voip section and either one of those two to configure Voip:
http://forum.xda-developers.com/showthread.php?t=303493)
http://www.touchxperience.com/en/setup-voip/downloads.html
I went through MRH 9.0 Valerian, CRCs stable Rom, joshkoss Manila2D and kareem9nbas RevROM. Each the latest Version. Only in the MRH I had to install DeviceUpdate myself, since it is included in all the other ROMs. Then I only installed VoIP-Support (under System in DeviceUpdate) and started testing. The biggest problem I currently have is that all of the tested Roms actually crashed when a VoIP-call came in while the device was in power save mode. Since I only tested one way to get the drivers (CRCs DeviceUpdate) the problem might just be the VoIP drivers, but a phone shouldn't crash because it gets a call IMHO.
CRCs stable sometimes works when called out of powersave mode. But I have also seen it crashing.
By crashing I mean that the device turns on, but not the backlight. The call is visible, but the Hermes stops responding to all entries and only a reset brings it back to live.
Right now I am back to using Fring, because there are a couple problems with VoIP in general:
It needs to stay connected over 3G (or Wifi) while in powersave/soft off, It needs to connect reliably to SIP and it needs to be able to use the in-built earpiece (while Fring can't use this I am currently using my BT-headset and will try the audio routing soon).
But Fring has a huge delay.
Is any of the cooks using the built-in VoIP of the Hermes themselves? Because it would solve a lot of my problems if I could just use that.
Next I this I will try going back to the original Schap's 4.31 and see if I can make that work better with VoIP.
I know this is only a Rom forum, but has anyone tested other apps, like Octro, Gizmo5, Talkonaut, AGEphone, MiniSIP or similar progs for SIP recently? I tried Nimbuzz: It can't connect over 3G by itself, it needs some other app to open and keep the data connection.
I know about audioRoute and audio switch, but haven't tried them yet:
http://forum.xda-developers.com/showthread.php?t=502361
http://forum.xda-developers.com/showthread.php?t=495166
Anyone know which works better?
[Edit:]
I did some testing with Fring. It is not reliable on CRCs Rom, because incoming calls from a landline phone (Sipgate.de) often times lead to a busy signal on landline. Fring doesn't react, even though the applet on the home screen says that Fring is online (Hermes on, not standby).
[/Edit]