Hi all,
I have a problem deciding which radio to use on my diamond.
It seems that it takes about 5 seconds from the time I choose to answer an incoming call with my "new jawbone" headser.
It could take upto 6 seconds in which time the caller does not understand why I do not answer him (he is connected to the audio on the diamond itself, until the move to my bt headset).
Can any1 recommend a good rom, or maybe any other solution to cut this lag????
I am using Dutty 3.6b if that makes a difference.
Thanks
For me, it takes about 3 second, but it's OK
Related
I apologize if this has been discussed, but I'm hoping someone can point me to the thread or re-cap the workaround.
Every so often my HBH-300 drops the outgoing audio during a call. It usually happens 30-60 seconds into the call. Basically, I can continue to hear the person on the other end, but they can't hear me.
I'm using the recent 1.33.51 ROM with Radio 1.08 and BT3900 drivers. I've tried the 1.10 Radio and still experienced the same one-way audio issues.
Any suggestions would be greatly appreciated! Thanks in advance!
Same problem here, it is not the headset as it works fine with a XDA II.
By the way mine only does this when the screen shuts off, as long as I keep the screen active (tap on it from time to time) then it doesn;t happen...
A fix would be nice, but don't hold your breath for Imate/XDA (HTC) to fix it, they never got BT working right with their previous phone/pda either....
Does anyone else have this problem...?
I've just got an HBH-662 for the Universal and it pairs fine and can make calls, but answering calls it doesn't work properly.
The headset recognises incoming calls and rings okay, but when you press the button to answer the call, it doesn't put the sound through the headset, only through the phone.
Maybe it's a setting I'm missing, but it's a tad annoying!
F.
I'm not sure I can help much, but I have no problems with my HBH-662 and my Jasjar.
Brett
I too have no problems with the HBH-662 and answering calls.
Will give it loads of testing later and see if i can get it to act the same as yours
I have been using HBH-662 with JJ for few weeks and in general I have no problem. I just wish that the Caller ID issue (the ability for the JJ to send contact name to the BT headset instead of number only) is resolved very soon.
I've not had any problem answering calls. The only problem I've experienced with this headset is an apparent clash with programs like GSPPocketMagic, MagicButton and HandyMenu. With either of the three apps running, my headset drops the connection after 20-30 seconds and I have to press the button on the headset to pick up the call again, which it drops 20-30 seconds later, etc. The moment I uninstall these apps it works fine again.
How strange. It seems to have sorted itself out!
I paired my old BT330 to compare it, it worked fine, so I removed the Akono and re-paired it and it seems to be working.
Thanks for the comments folks, it's useful even though you didn't get the same probs!
Now the next issue is how to reconcile the fact that SE say this thing provides "Caller ID", which I took to mean the NAME of the person, with the fact that it doesn't do anything of the sort... only the number.
And who really remembers the numbers of their friends these days?!
F.
fergusstrachan said:
Now the next issue is how to reconcile the fact that SE say this thing provides "Caller ID", which I took to mean the NAME of the person, with the fact that it doesn't do anything of the sort... only the number.
Click to expand...
Click to collapse
It does provide CallerID name... but only with certain phones WM phones being among those that don't provide name information. It's my understanding that the problem lies in the bluetooth stack on the phone and not with the headset. I did see a post a short while back that suggested the issue was being worked on and would be resolved in a ROM update, so I have hope... but I'm not holding my breath.
Brett
Hehehehehehehe.
Microsoft 'working on' the bluetooth stack...
hehehehehehehehe. Sorry. I just find that really funny. The idea that MS are actually working on anything to do with the BT stack on WM!
I don;t really understand why it takes so long to program a bit of BT to provide something like that (or, say A2DP!). I mean, how hard can it be?
Well I'm not a programmer so I won't moan.
F.
Splatt! said:
I've not had any problem answering calls. The only problem I've experienced with this headset is an apparent clash with programs like GSPPocketMagic, MagicButton and HandyMenu. With either of the three apps running, my headset drops the connection after 20-30 seconds and I have to press the button on the headset to pick up the call again, which it drops 20-30 seconds later, etc. The moment I uninstall these apps it works fine again.
Click to expand...
Click to collapse
Any more comments if Sony Erickson Akono BT headset HBH662 really clashes with magic button and handy menu?
Hi All
Im wondering if any of you guys can help me.
I regulary use TomTom on my XDA Orbit and also use the speaker phone to talk on the phone as I drive. I have a problem when I receive an incomming call wilst running TomTom. The notification appears on the bottom of the screen telling me the is an incomming call, but Its a bit difficult getting from TomTom to the phone screen to switch on the speakerphone, without either dropping the call or quickly answering the call, then quit tomtom, then activate the speakerphone. I dont want to use the supplied headset and i dont have a bluetooth headset. Can anyone give any tips? Maybe a taskmanager wich cyles through the active programs using one of the buttons on the side of the phone??? Clutching at straws now maybe??
When a call is incomming, press the green answer button, quickly, and then press and hold it again.
Thanks for your reply. I will try this and let you klnow how I get on.
Cheers
Works a treat. I Have now also mapped the VJPhoneShortut ("Speakerphone ON") to the GPS Button on the handset which gets rid of the 3 second hold (not always easy when driving). Thanks again.
Hello!
I am having two problems with video calling under WM6. I guess they also appear in WM5 but since I'm running WM6 now... Here they are:
1. Is there any way of making a video call "by default"? More exactly what I want to do is always call someone on video. Is there anyway I can put a "v" in front of the number or somehting similar? I have 150 free video minutes each month...
2. Audio calling works ok. Video calling works ok ONLY when using a bluetooth headset or the original HTC headset. Otherwise, when using the PDA's own microphone it works like it's "voice activated". The person I am talking to always misses the first letters of sentences. I presume that it's somehting related to a voice activation problem because when using the headset the other person hears all surrounding noises that are in my environment. When using the PDA microphone they hear a perfect silence until I start talking.
Is there any solution to these problems? Thanks!
Daniel
ok, i have the same problem as you, inno.. the problem with audio in the video call.. if i don't use the handsfree, the other person i'm talking to can't hear all the words from me.. initially, i thought it is a problem related to the microphone agc, but it's not from there..
i'm using a wm6 rom, cooked by lvsw
let me add my concerns on this too.. in video call the prob is i cant hear the other person 95% on the time.. even on speakers.. i have motorolla v6 aswell and never had a problem with that (the point being made is that its not the network ..its the phone rather.. wm5 didnt have this problem so its wm6 related)
secondly HAS ANYONE FOUND A SOLUTION (working one) FOR THE LOW IN CALL VOLUME ????
btw.. im using black 2.0
Any news?
Any news about this problem? Only three guys encountered it?
i'm withn everyone here, but i'll add to the problem by saying that it's not just with video calls but also with just putting your phone on loud speaker to use it as hands free... is there anyone out there with a solution?
hi guys, some time ago I found a problem of connection between my parrot 3200 and the p3300. The problem was that from time to time when the parrot is switched on in my car appears "calling" in the screen and I did not any call.
After a lot of test I found that the problem always happend when I make a missed call, I mean, I make a call from my mobile to other phone and the recipient doesn't answer. If this is the last call I have before swich on the parrot the problem happened.
is this a bug of wm6? becuase with wm5 never happened!
regards,