I have a UK M5000 and updated the ROM to the new Orange ROM without problem. It was still slow so I plunged for the upgarde to the Dopod ROM. Since I did this it crashes all the time. Sometimes I can reset it sometimes I have to take the battery off. After a bit it won't even boot at all!
Despite all this I am always able to get to bootloader and reflash it. I have since tried the QTEK ROM and even back to the Orange ROM but now it still is unstable. Is there any known reason for this that I can try.
PS tried task format commands and mtty stuff as most of the time after a crash it sticks at the splash screen in all ROMs.
PPS IT NEVER did any of this before even after the first Orange ROM upgrade.
ANy help much appreciated.
Thanks
James
Not sure if you've cured this by now but I am a UK Orange user with SPV M5000 and went ahead with Dopod upgrade wihout any problems.
Presume you tried Hard Resetting, formatting card etc?
I have the same problem... It starts 2 days ago... Its terrible!
I have T-mobile. Now i flashing with original T-mobile ROM and i hope that everything will be ok.
If anybody knows whats happend???
I thought that the problem is on hardware...
30 minutes ago i flashed with latest I-mate ROM and when after flashing i do hard reset nothing happend. I see black screen and thats all!!!
Yes! With T-mobile ROM it seems to be ok. Now i try to flash with I-mate ROM again.
May be the problem is in the "MaUpgradeUt_noID.exe"?...
MaUpgradeUt_noID.exe
I find out that there are some issues with this file. Is this the same file we used to use during upgrade/change language??? If yes, than why when I tried to dawnload from the buzz web side i find that there said that the file is 365kb but when you dawnload the file is 165 and that is why some people are having problems when upgrade their rom or change operators/languages.
So if I want to change language it sais that you shoul run MaUpgradeUt_noID.exe and than I see in the picture of Magician. Is this NORMAL and should I go forward or WHAT.
Flashing with T-mobile original ROM didn't resolve the problem...
It's still bad...
What the hell is going on with my Universal???
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
Are you following the directions at THIS GUIDE . What ROM are you trying to put on there? Did you CID unlock the device? Are you running Vista? Do you have .NET 2.0 or 3.0 version?
That should be enough questions to get us started.
Did you read my title? This is the stock ATT WM6 that came out yesterday. No need to unlock the phone, it is a 1 week old ATT 8525 with the stock ATT WM5 Rom on it.....
Windows XP SP2+ PC.
If it's the rom RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship maybe it had some problems because if you go to the official release site http://www.htcamerica.net/support/8525/software-downloads.html they are still showing the WM5 rom for download.
There may have been a problem with the release and they pulled it back for some reason. Just a thought and not much help I'm afraid.
Yes thats it. When it ID's my current Rom and what it will upgrade to, it is correct. (it shows it's 3.62 vs my current 2.xx) Many peeps have had no problem upgrading to it. (most find it a very good Rom from the varios sites I read)
And this page at HTC still has it up:
http://www.america.htc.com/support/8525/software-downloads.html
JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that
@brorex he can wait till christmas next year, if the updater cant communicate with the device , because it has closed AS then it will never update.
@JETninja
try doing what i said to this guy here,
http://forum.xda-developers.com/showthread.php?t=341282
yesterday he upgraded with the same rom and device and it worked
brorex said:
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that
Click to expand...
Click to collapse
I thought that too, but after the color bar test when it want to set you up to actually install the ROM, the Upgrader whats you to make sure there is an active connection with AS. Well, there isn't. It shut down and the PPC is still showing the color bars. I can reset it, then re-sync to AS. (after having to re-launch AS from the Program Files - it no longer resides in the Tray when it shuts down during the process) I then get it going again, it attempts to start the ROM upgrade, AS quits again.....about a min later I get the Communication Error message....
I'm downloading a 2nd copy right now, will try it as soon as it completes...
*Edit...think I have an idea what I'm doing wrong, I have it connected and synced too early, the first part of the ROM updater is just a PC test, I'm thinking the PPC should not have been connected at that time. Re-trying it now.....
Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...
Going to give it a shot here at work on this PC. If no go still, will try the above mentioned methods. PC at home kept getting communication errors...
i had the same problem
make the connection at AS then start the update process.... the 8525 will go into 3 bar mode and when the update gets to the upgrading rom screen... the installed rom wont show up.... hit upgrade... and then continue and it will work.... i was stuck there for a while too because if i waited for the istallation to load then made the as connection the right image would show up in the installer but then it would stop working after that.....
I just put this rom on my 8525 and it worked well for me. My 8525 is unlocked with supercid so I had to extract the OS and update using the methods described for working with SPL-140 Olipro with IPL-1.01 or the "How not to Brick thread".
That won't help you much as you don't want to do that mod to your New 8525 and void the warranty, but thought you might like to know the stock OS seems pretty stable at this point and I have had no problems yet.
Thanks everyone! It finally worked here on my Work PC. At home I could get to the Bootloader, but it would lose connection for some reason. Here I lost it the first time, but tried it again and it managed to stay connected and apply the update. Got it up and running, applied owner info, just now re-doing the AS relationship. (a good 500+ contacts! LOL! It'll take a little while as usual!)
Then it's back to all the tweaks I like so far...and some new ones I've held up on since I've been waiting for WM6.
Out of my 3 PDA's (2 ipaqs and this puppy) this one has certainly been the trickiest ROM update, but it seems to be more my device since most don't have this much trouble.
Thanks again!
So far- So good, but just one problem- BATTERY!!!
After I installed upgrade, my battery drains in few hours... I reset phone, I reloded upgrade- nothing helps! Warranty still in affect, but phone worked well and I'm positive- hardware is OK. What else can i do to fix this problem?
I have the same problem
ai6908 said:
Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...
Click to expand...
Click to collapse
I have the same problem exactly. As soon as I start the upgrade the device immediately sleeps and the connection is lost. 1 minute later I get a Connection error message.
I am new to all this. How do i put the machine in 'boot loader' mode?
Thanks
Just did this rom update again on a 8525 the installation went extracting files active sync shut down wait a few minutes nothing happens the the upgrade screen no ACTIVESYNC connection while update is happening as soon as device is in bootloader mode activesync closes out
Hi,
Few day ago my artemis p3300 got crazy.
it's make random reset, sometimes isn't boot up after reset, it stuck on black screen. or it's coming up and then reset again.
it's also stuck few times on vibration mode. and it's only stop with soft reset.
suddenly I can't turn on WIFI , it's always stay off .
I Try this roms in the last 2 days :
manila 2D pdviet 33 - 36
b&b v 5.0
last I returned to touch 4.02 and I still have no wifi and it's stuck.
I also try to change the radio firmware...
should I throw it ? there is something to do ?
try
1-flash wm5 ship ROM
2-CID Unlock
2-Flash your favourite ROM
U should be OK
i tried to install the original HTC ROM but i still get error #24 - "invalid device id" or something similar. at the moment i can get the tri-color screen by pressing the voice button and soft reset and that's it. when i try to soft reset normally i get a blank screen. plz help?
TIA
finally it's back...
thanks.
I found other Original ROM . I installed it and it work fine.
Then , I installed Manila 2D again and now after I change my Radio Ver, My gps and GSM are working good.
the last thing that no working is WIFI. i can't turn it on!
how do I know what radio version are fix for my device ?
thanks
royis said:
thanks.
I found other Original ROM . I installed it and it work fine.
Then , I installed Manila 2D again and now after I change my Radio Ver, My gps and GSM are working good.
the last thing that no working is WIFI. i can't turn it on!
how do I know what radio version are fix for my device ?
thanks
Click to expand...
Click to collapse
You may also want to try buying a new battery if your device is old. I've seen Wizards act wierd when the batteries go bad. But they usually get swollen - battery pushes out the battery cover.
Also, have you opened your device lately? I had a problem with my reception after I changed my housing. There are small connectors that have to be bent out to touch their corrasponding spots on the circuit board for FM Radio, GPS, Wifi, ect. Have to make sure they touch the right spot.
And of course, it could just be a bad flash. Reflash and try different radios. That's all I can think of.
my wifi is not working too. After manila 2D, and i try old rom, new roms, the newest radio but not working.
Hello,
Today i wanted to try the new 3volution rom for the s620 when i got an annoying bug
I spent most of the afternoon looking for an answer but found none.
Everything works well in the beginning until i got to push the center button for the screen to turn white. It turns white indeed but then activesync desynchronizes and doesnt resync anymore, so im unable to upgrade (either it stops at 3% or with kavana's doesnt detect old rom) and in some cases it says the new flash rom is corrupt..
Its like my 5th flash, and prior to today i never had a problem flashing and upgrading
So i tried reinstalling activesync multiple times, changing cables, even hard resetting my s620 (i got the nrg rose 1.7 rom on it), i even restored my comp on a previous state.. nothing
It just keeps breaking the sync when i push the center button and doesnt resync for the rest of the procedure
If someone has an idea im all ears ^^ and sorry it it has been already posted
Welcome to forums
Try a hard reset or reinstall ROM
Have a deep read here:
http://forum.xda-developers.com/showthread.php?t=537151
Hope it helped,
redownload the rom. then read this http://forum.xda-developers.com/showthread.php?t=493266
3% freeze up it very common
I am seing something similar. If I set my device down without locking it the screen goes completely white. When I first loaded the rom it didnt do it for about a week and now it does it everytime. The only changes I've made since loading the rom is that I installed Google Maps and TCPMP.
Hmm its very weird, i did the hard reset.. well it didnt work..
The 3% error i got that only once
I tried installing the official htc 6.1 windows mobile rom and got the error 244 ...
and same as always, the moment the screen turns white it disconnects from activesync and doesnt reconnect. Imho XP needs reinstalling..
So my theories so far are: activesync is buggy to the core. Ill try flashing on my laptop as soon as i get to it.
Also one thing ive noticed: in all my previous flashes i had the original htc battery.. now i got an extreme energy battery with a blue and white sticker, ill try replacing the original battery before reflashing.
As i said in my first post, this is not my first flash, and i have flashed before to kavana's then rose then kavana's again and it always went smooth.
I have been using the S620 for like one year and a half and never had a prob.
Its an htc version and it was not locked; anyway in belgium locked phones are forbidden to sale
Greetings from the land of the beer and thanks to the developpers
Which Bootloader are u using ?
The official shipped one or the modified one ?
Hmm good question, where can i see the version ? When it boots up i see the nrg rose 1.7 black screen with white writings.
Another weird thing: my keyboard is azerty, so prior to hard reset i had a language pack for french keyb, after the hard reset my keyb works just fine without any language pack installed ... not that it is a problem but i just dont understand ^^
Hi, first sorry for my bad english.
Since 2 days i have following problems, when i flash a new Rom my desire hang at the white HTC logo and restarts again and again. Sometimes it boots up but then i dont have the HTC-Setup Wizzard. When i try to add my Google-account manually in Settings my Desire reboot. The same happens when i try to connect WLAN.
It happens with OpenDesire 2.3, AOSPDesire 1.3.5 and CyanogenMod_6.
Strange is that DeFroST-2.4, LeeDroid-1.5 and Stock-Roms works fine.
I wiped everything and tried 3 differents SD-Cards. I also unroot and root again, but with no succes. I hope that anybody can help.
Best regards
Daniel