THE LAST VERSION - "NATALY 2.7.Final
Think, it's the last my work for Diamond. Going to change device. So, thank for everybody for help & good community.
Also, thanks for donations. It's the good indication, that somebody like "Nataly".
Hope, this project will live own life. I haven't any negative opinion about any "forks" or new projects, "Nataly"'s based.
Good luck for everybody!
FIXES & ADDS - POST #2
EVENTS SYSTEM "HOWTO" - POST #3
Why "NATALY"? Why not, if my wife's birthday was at the same time, when the project has been started. The reason is enough, isn't it?
Tutorial & howto for cooking you can find here: http://www.darkforcesteam.com/showthread.php?p=3560
Or here (as file): http://rapidshare.com/files/237121567/Platformrebuilder_-_New_ROM_Kitchen.rar
Lightweight ROM, Aka "memory management". cleanRAM. (http://www.htcaddicts.com)
Dynamic CPU management (http://www.nuerom.com)
MortScript included.
UC Ready.("readme" included in the distr. archive)
Big thanks 'helgee' for battery driver and the help at all!
bepe - for excellent kitchen & utils.
Chainfire - for manila's CFC
olimo (3ppc.net) - the skin for MS keyboard. Made specially for "Nataly".
AVLev - for nice dialer skin.
'eLiAs' - for asynckiller.
If you like their work, please donate them!
Community at xda-developers.info & 4pda.ru - for help and patient testing.
UNSIGNED HARDSPL IS NECESSARY!
ATTENTION!
Taked out files:
ConnectionSetup's provizion.zip - base of providers.
Part of Opera broser - Opera_addon.
Not see the reason to keep about 4M of "dead cargo" in the ROM.
Now - possible to keep it at the Internal Storage.
Mark CAB files in Internal Storage/_Install as READ-ONLY! or you can loose them after install the ROM or hard reset.
And don't forget to make HardReset after install.
The last stable - 2.7.0
ROM
Kitchen
Cabs
The old ROMs
http://rapidshare.com/users/7L0TM7
ATTENTION!
Manila - CFC compressed! So you need remember it, when you want to change something.
For kitchen:
Fixed PhoneCanvas Full (with Lanscape staff)
PhoneCanvas_Slider_3_50_33348_0_EN
AlReader
The best books reader, which I saw. May simple the best.
"Reader" profile included already in the last kitchen.
AlReader link & script (DynamicClock) for kitchen:
The little manual
Interesting posts:
About bepe's kitchen: http://forum.xda-developers.com/showpost.php?p=3909361&postcount=1468
About nueDinamycClock: http://forum.xda-developers.com/showpost.php?p=3925196&postcount=1507
Cooking at all: http://forum.xda-developers.com/showthread.php?t=527935
Q., asked to private:
i want to start an application on wake up, but don't know how. i see in your rom everytime it call for mort script. how did you manage to do this?
Click to expand...
Click to collapse
Info below - for cookers only! You will need hardreset after it! Because your notification system will be damaged. Do it without reboot & don't forget disconnect the PC cable after copy mxip.notify.vol
A:
You need to add your app to M$ event system. (event "wokeup" - is one of standards)
Standard file of notifications - sys/shell/mxip.notify.vol
Steps:
Copy mxip.notify.vol to the \temp, for example. (at the device)
Open it by dbExplorer .
As Type: "external database volume"
Path for "external volume file" now: \temp\mxip.notify.vol
You will see 1 type db ~ 8-10 strings (don't remember exactly)
Make backup of selected database.
Then open \mxip.notify.vol (working file)
Make restore db from backup (erase?-yes)
We have the standard (clean) events system for editing now.
Use FDC taskmanager (included in "Nalaly") for it.
Open the "notifications" bookmark.
You can delete:
ceipui.exe strings,
one of repllog.exe (see http://forum.xda-developers.com/show...3&postcount=81)
And can add own string, of course.
I did 2 scripts for events: "wokeup" & "net shutdows"
You limited by your fantasy only.
Next step - make backup again, after changes (the working db - DB_notify_events)
As selected db also.
Then open again "non touched" \temp\mxip.notify.vol
Restore the last backup to it.
We have edited mxip.notify.vol for kitchen now.
Fuu-uh.
Interesting...hope there's good support . Will check it out.
the down and let me just say that it is super, super fast.
Congratulations and thank you for your work
will check it out & report any bugs in the next couple of days
I've only had my Diamond for a month. Have been using Dutty ROMs the whole time but since he is stopping with them I thought I'd look around at soemthing else.
I was reading your other thread last night and was going to start playing with that kitchen, but I might just have to give this a try!
I've flashed it and testing now.
First thing is, no matter how many times I run connection setup, it never works. It appears to work, then does a soft reset. But when I check Connectins > Connections > Advanced, there are no connections setup.
I am with Australia > Telstra. I have never had this problem with other ROMs.
The one that pops up automatically, seems to keep appearing after every soft reset. Yet every time it doesn't create any settings.
I've tried uninstalling and reinstalling the Connection Setup but still nothing.
I'll have to go back to Dutty until this is fixed which is a shame as this ROM is VERY fast! Great work, I'll stick around, hopefully I can help find more bugs and get this ROM running sweet
Thanks for info, I'll fix it.
this rom is the fastest i've ever tried! keep up the good work! im waiting for the connection setup bug to be fixed
Pity, but connection setup didn't want to work normally outside the ROM.
But not the huge basefile (provision.zip)
So, I did rebuild the ROM & distributive at all.
Uploading now.
Excellent, I'll flash as soon as it's uploaded!
Thanks
Thanks for attentive look!
Your help is important to me: difficult to work without mistakes at all.
.....done, - see the first post.
I've been using this ROM for a week now, I can recommend it to everyone.
It's fast and has no bugs to me (I use a version without Connection Setup).
Furthermore it's a good idea from mondilv to leave the Opera and keyboard out (at least in my version they're out...) so everyone can install it's own version of these programs.
pietrucci said:
I've been using this ROM for a week now, I can recommend it to everyone.
It's fast and has no bugs to me (I use a version without Connection Setup).
Furthermore it's a good idea from mondilv to leave the Opera and keyboard out (at least in my version they're out...) so everyone can install it's own version of these programs.
Click to expand...
Click to collapse
..does this rom include office (excel, winword..)?
Yes, just those two are included from the Office pack
I gave it a try and it really is good, very fast and fluid manila..
The only thing I missed was HTC keyboard, but because it is a light rom, I can understand that... so far, the rom works as it should..41% program memory used on first boot, and 144 mb of ram for storage...lots of reserve, just as i like.
Thumbs up, chef...thanks mondilv
mondilv said:
...and "oldway" ROM FILE (without outside parts) : http://rapidshare.com/files/173888219/WWE_DIAM_OS759_B755_12PP_NATALY_V1_OW.RAR
Click to expand...
Click to collapse
I assume this is the fuller ROM with everything IN that you left OUT in the other?
Keyboard
Htc86 said:
Yes, just those two are included from the Office pack
I gave it a try and it really is good, very fast and fluid manila..
The only thing I missed was HTC keyboard, but because it is a light rom, I can understand that... so far, the rom works as it should..41% program memory used on first boot, and 144 mb of ram for storage...lots of reserve, just as i like.
Thumbs up, chef...thanks mondilv
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=2893043
Blackstone keyboard already installed and going strong
Anyway,thanks for your help, bro
Thanks everybody for good review
pietrucci said:
I assume this is the fuller ROM with everything IN that you left OUT in the other?
Click to expand...
Click to collapse
Sure, Opera part & provision.zip are included inside the ROM.
It's possible to use like ordinary rom. (google maps can install later, as simple cab file).
Sdconfig still works, of course.
I didn't include EzInput & XT9_IME packages (htc keyboard) in the repository. I'm not sure, that is the best choice.
Can find more interesting & lightweight "models".
Related
Shadowmite's Cingular AT&T Trinity Rom:
Code:
Shadowmite 1.1 Trinity Rom:
Based on the offical release rom and using kernel 1437
Using 4MB Pagepool
Removed:
-Adobe Reader
-Midlet Manager
-IA_Zip
-Streaming Player
-Windows Live
-all the pics/vids/rings other then 2 standards
Changed:
New theme
Full screen commmanger
Date/Time pulled from network on start
Keyboard overlay is the nice one from PDAVIET
Fileexplorer is swapped for one with icon abilities
Added:
+Cingular customizations
+HTCustom 1.7
+SoftKey Control Panel
+HTC Home Plugin
+X-Button
+Batterystatus today plugin
Regedits:
Set for high quality A2DP default (jointstereo, sample rate 48000 and no bitpool)
Set to show network time tab in phone and enable it
Set to enable disconnect and data timer default
Set to hide SIM contacts default
Set to disable security by default
The one bug found so far in this release can be fixed with the X-Button Fix.cab attached below.
http://rapidshare.com/files/44078979/Shadowmite_1.1.rar.html
Thanks!
I always feel like such an outsider way out here in AT&T land! Thanks for the special attention. Downloading now!
Here's where I get to show my stupidity!
All the other ROM I have flashed have come with a utility to run the process. I tried replacing a previous rar file with this one and running the utility I had, but it changed nothing. I have read all the guides, the step by steps, etc, but the info seems to be for full packetsm not how to insert a new rar. I am dense. I am uneducated, I am sorry!
Thanks Shodowmite. It's good to have someone taking care of us ATT dudes.
What is the difference with other ROM ?
Is there something specific for AT&T ?
Sorry if the question is stupid, but I don't know AT&T particularities... ;-)
auramae said:
All the other ROM I have flashed have come with a utility to run the process. I tried replacing a previous rar file with this one and running the utility I had, but it changed nothing. I have read all the guides, the step by steps, etc, but the info seems to be for full packetsm not how to insert a new rar. I am dense. I am uneducated, I am sorry!
Click to expand...
Click to collapse
ok, have you flashed hard-spl on your phone before? If not, search for it and flash it! Next, you need winrar or some other file extraction program to extract the rar file (a compressed folder) to get the files out. Then you'll find the installer files inside, you run the exe... Hope this helps.
What is the difference with other ROM ?
Is there something specific for AT&T ?
Sorry if the question is stupid, but I don't know AT&T particularities... ;-)
Click to expand...
Click to collapse
Mainly the big thing is this includes by default the sms/mms and data/proxy settings for cingular/att's network. You can use this rom with another carrier, but you'll need to delete those settings or install you own over top of them.
It's the little things
Thanks for the patience with my idiocy. I got WinRar and am flashing now.
auramae said:
Thanks for the patience with my idiocy. I got WinRar and am flashing now.
Click to expand...
Click to collapse
We all have to learn at some point, I was no better when I started long ago... Don't worry about it and just learn at your own pace... Hope you like the rom!
I've updated to Shadowmite 1.1, while this is still a "beta" if you will, it's perfectly stable and appears good. Use this one if you want the HTC Home Plugin available... I've also removed windows live and streaming media in this version:
http://rapidshare.com/files/43857196/Shadowmite_1.1_beta_0.rar.html
Thanks. Good job. Downloading.
Ive had it running for a few days now and have noticed marked improvement on battery life. My only challenge has been running out of program memory during IE sessions. I run MemMaid and clean up, then I can go again, but I'm wondering if I have something set wrong.
Hmm, not sure, but I will be releasing another version maybe tomorrow with a increased available program memory using a 4mb pagepool instead of the stock 6mb.
Slightly off topic but is there a way / application to load apps & information in one go after flashing a new rom or is installing all the cabs one by one the only way.
Thanks in advance
S
Well, dunno if it helps much, but my HTCustom app, which is in my roms has a CABS button which allows you to choose a folder and it starts all cabs in it to be installed for you... but it needs human interaction.
In other news, the rom is ready and uploading now...
Version 1.1 is posted, now with 4mb pagepool, should increase your program memory a little and make it perform a little more quickly. I think this is about perfect now, let me know!
Nice ROM, but...
Shadowmite said:
Version 1.1 is posted, now with 4mb pagepool, should increase your program memory a little and make it perform a little more quickly. I think this is about perfect now, let me know!
Click to expand...
Click to collapse
Hi, A very nice looking ROM - for which... thanks!
BUT... I keep getting... "An unhandled error has occured in the shell. Attempting to restart the shell [ok]". Soon as I hit the OK, phone reboots.
Now, to help u diagnose... I have installed NOTHING on top of your ROM. Only change I made from stock is I removed your Cingular settings .cab and installed the standard HTC ones for my UK Vodaphone network. (Actually, I was getting this error BEFORE I even removed the Cingular .cab)
Only other thing I can say is, I also unchecked the BatteryStatus plugin from the Today items (as I don't like it or need it... or do I, with this ROM? Maybe I will re-enable it a while...)
That's all. I'll try and stick with this ROM as it's the kind of thing I've been working on for myself... nice, clean and tight... but I've had no time recently to develop ROMs so it's easier for me to run with your work and let you do the head scratching!! Still, a nice effort so far - thanks again!
Moz.
Weird, I've never seen that error. I hate to say it, but could you start with the rom freshly flashed and tell me anything I can do to cause this to occur? Or is it random? I do run the battery status plugin on mine (very useful info, especially the current draw) but I've just removed it to see if I can get the error.
Let me know if you have any procedure I can try to get this error.
Also, you removed the cing.cab and then installed yours and ran it? That should be fine as the only cingular branding is that cab being ran after the welcome.
Fixed it... I think!
Ok, so it seems to be your 1.51 version of the HTC X-Button task manager. I always set the "End progs by tapping X" (not the default tap-and-hold option..) The previously mentioned error only ever happens when I'm tapping X to close down something or other... So, I installed my own .cab of this app (v1.5 build 29196) and all is now fine!
I'll probably do a fresh flash of your Rom tomorrow (its 2am now here) just to be sure, but I think I'm right in saying that your implementation of the x-button app in rom does not give the x-button icon in /start/settings/system... (i now have this by virtue of my reinstalling the app...) I think this icon *is* needed because if you choose to turn off the x-button "shortcut" thingy in the today screen there would otherwise be no way to get back to the x-button option settings.
Hope this helps...
Moz.
a-ha, I got the error now myself, but only if set to close app on clicking the X and furthermore then closing a system app that is running from shell32.exe. For some reason my entries of immune apps aren't being taken as immune. I'll look into this. Good catch!
The program however is in settings, system and is listed as task manager...
Ok, here is the fix, just install this cab (reg entries only) and it'll be working after the next soft reset... I'll figure out why this didn't work from the main hive before the next release.
Here's my Naked 5 ROM. It includes the following:
Windows Mobile 6 Professional CE OS 5.2.1620 Build 18128.0.4.4
Camera 4.0 build 28276
Arcsoft MMS 4.2
Internet Sharing
AT&T Black Stock Dialpad (3G in next post)
10 Button Black Comm Manager
Comm Manager Vibe Toggle
8525 Keyboard Mapping
PreConfig launches SetHSDPA & SetAccousticParameters.
Points to note:
Button 5 is mapped and ready to use / PTT is disabled
It uses Bepe's Big Storage OS.nb/XIP v3.60 and is based on a stripped version of austinsnyc Lite ROM (with permission - thanks dude!)
It does not launch extended ROM or storage card installations, nor does it include a radio, IPL/SPL, splash screens, extended rom, or anything else. JUST THE OS.
Memory Details:
Storage Free: 80.04
Program Free: 30.49
(Launcher and poutlook.lnk removed from /Windows/Startup - nothing installed, after reset and fully rebooted)
I would recommend you install the .NET Framework after flashing, as I did not include 2.0 or 3.5 in the base and some programs you install / use may require it to work. See the next post for links / downloads.
Why? I wanted a super stripped and fast base to add my cabs to with a crapload of storage. I don't have the time to keep tweaking my custom rom configuration, so this will give me the most flexibility and performance.
Download Links:
ROM/Installer(RUU) Pandora Naked 5:
links pulled - see new post
Kitchen:
links pulled - see new post
More Stuff:
Using KarhU's stats, I put together this build based on performance statistics. It's clean and fast - and should run as fast (if not faster) as the best one's out there. I should have started a new thread - as it's a whole new ball of wax - but it's look and feel is exactly what I started after.
Here's KarhU's great thread on benchmarking. I've learned a lot from his work - it's an excellent asset for tuning
KarhU's Benchmarking Thread
Note too that I didn't include the .rgu files. Please use the kitchen if you want to use the components.
Evolution History
Pandora Naked 1 - 3 was based on the Kitchen version 9.5, but had a problem with PIE speed
Pandora Naked 4U was based on austin's rom release, but setacousticparameters didn't launch correctly and was missing a few notification alarms
Pandora Naked 5: new thread started
Screen Shots:
Additional Cabs for ROM
Here's the .NETFX and SQL CE files:
.NETFX CE 2.0
.NETFX CE 3.5
SqlCE 2.0
SqlCE 3.0 (already in ROM)
Here's some items I've found on the forum, or in the case of the Random Access package, I built a cab for it and included the registry settings to integrate it into the dialer / hard button 113.
Hi, is this a 3.60 ROM, or a newer ROM with bebe's 3.60 mod?
Does it include 3G-Dialer?
PAPPL said:
Hi, is this a 3.60 ROM, or a newer ROM with bebe's 3.60 mod?
Does it include 3G-Dialer?
Click to expand...
Click to collapse
It uses bepe's modded 3.60 OS.nb/XIP, and it does not include a 3G dialer.
I retained the HTC3GVT.dll within the rom in case you have your own 3G version you want to use.
*Edit: The dialpad you install needs to have all the components, including the dialpad and smartdial dll's, to use with 3G.
Hi,
I'll give it a try as I'm fed up of several troubles had with cooked in apps-
You advise to install .NET Framework 3.5 cab FIRST? That is, before installing the ROM? I'm surprised but will do as you say.
Thanks.
EDIT: Well, I was unable to install it first, as it says the version is not intended for this device...
Prerna said:
Hi,
You advise to install .NET Framework 3.5 cab FIRST?
Well, I was unable to install it first, as it says the version is not intended for this device...
Click to expand...
Click to collapse
The same here, then I took the .wm. version, that works with my Hermes. How did you manage to install it???
I was unable to install it neither before, nor after installing this ROM.
Prerna said:
I was unable to install it neither before, nor after installing this ROM.
Click to expand...
Click to collapse
If you use the CAB-file with .wm. in it (NETCFv35.wm.armv4i.cab), it should work..
You'll find it at ftp://ftp.servage.net/Upload/Micorosft .NET CF 3.5 RTM/CABS/
pietrucci said:
If you use the CAB-file with .wm. in it (NETCFv35.wm.armv4i.cab), it should work..
You'll find it at ftp://ftp.servage.net/Upload/Micorosft .NET CF 3.5 RTM/CABS/
Click to expand...
Click to collapse
Need login account to access this ftp
username : xda
password : xda
mattk_r said:
Why? I wanted a super stripped and fast base to add my cabs to with a crapload of storage. I don't have the time to keep tweaking my custom rom configuration, so this will give me the most flexibility and performance.
Click to expand...
Click to collapse
hi Matt,
I wonder: if you install everything afterwards using cabs, will this use more memory or will it be the same as coocked in ROM? In other words: do cooked-in programs use the same memory (size and type) as CAB-installed programs, as far as you know?
pietrucci said:
hi Matt,
I wonder: if you install everything afterwards using cabs, will this use more memory or will it be the same as coocked in ROM? In other words: do cooked-in programs use the same memory (size and type) as CAB-installed programs, as far as you know?
Click to expand...
Click to collapse
Sorry for the cab mistake, I'll fix the reference in the first post and make it clearer. I meant to say "after flashing, install the .NET framework before installing any other programs."
As for the memory comparison, the total space consumption is about the same, but you don't have the extra dsm and .rgu files, and the files are installed to the correct target directory, rather than all residing the windows directory - increasing file system performance (at least while browsing the contents of the /Windows directory anyway).
Edit: Updated context of post 1 and redirected link to original thread on .NET topic.
Whoohoo!!! 2 stars! I think that just made my whole day
I truly feel honored and quite special.
'Tis easier to complain than to provide fixes...
Mods - feel free to delete. I'm going back into my cave now.
Frickin about time...awesome rom. sdhc support I hope? So glad you left out netframework 2.0 as I hear installing 3.5 without having 2.0 cooked in prior boosts performance by 20%.
Device just rebooted, time to test =)
Directories seem take forever to load in file explorer.
Edit: Soft-reset seemed to fix that. Now navigating through directories seems much quicker than previous rom. Overall the device seems 2x as fast as my last rom. I had like 5 programs opened and running and still navigating through the start menu and then settings/programs screen was instantaneous. Great frickin rom so far.
hi mattk_r ,
I love this rom!
is there a way to get the kitchen files?
so i can build my own rom based on yours with the buildos tools like in the older pandora version? of course i would share my work to others
PaY87 said:
hi mattk_r ,
I love this rom!
is there a way to get the kitchen files?
so i can build my own rom based on yours with the buildos tools like in the older pandora version? of course i would share my work to others
Click to expand...
Click to collapse
Sure, I'll try and get them uploaded today.
I'm also updating post 1 with a link for a working cool 3G dialpad. I had to verify if I could install one
surrept said:
Directories seem take forever to load in file explorer.
Edit: Soft-reset seemed to fix that. Now navigating through directories seems much quicker than previous rom. Overall the device seems 2x as fast as my last rom. I had like 5 programs opened and running and still navigating through the start menu and then settings/programs screen was instantaneous. Great frickin rom so far.
Click to expand...
Click to collapse
The only time I've seen this issue with after running PIM Backup and restore my phone settings. After restoring, it's super slow until I reset, then all is fine. It's done it on every rom I've used.
mattk_r said:
The only time I've seen this issue with after running PIM Backup and restore my phone settings. After restoring, it's super slow until I reset, then all is fine. It's done it on every rom I've used.
Click to expand...
Click to collapse
Thanks for great ROM, will try it out sometime. PIM backup hogs up cpu after restore, i usually let my phone sit for a while, and then it finishes whatever it does. I used to softreset the phone as soon as i restore, but not anymore. I think it mainly hogs the cpu after call log restore, if there is call logs of 100 or more..
PAPPL said:
Hi, is this a 3.60 ROM, or a newer ROM with bebe's 3.60 mod?
Does it include 3G-Dialer?
Click to expand...
Click to collapse
I posted a 3G dialer that works in the first post
Dia Duit ROM v1.7.0 final is out
for keyboards installation see bottom keyboard note
for latest news/changes take a look here
DOWNLOAD :
thanks to myself for original mirror: jump
MAIN FEATURES :
Based on latest 2.11.70.1 (from Orange, removed Orange stuffs)
Diamond Manila TF3D 2.1 + new driver set from Topaz, ported some basic Leo packages, etc...
LZX compressed rom... 130Mb free main space after fresh installation
Removed the annoying Ms welcome & manual screen calibration after every upgrade/flash/hard-reset, now is pre-configured so don't take care anymore
sUC (aka suiller's UC) is included (detailed sUC review/instructions) with it of course all Dia Duit features: speed profile selection, automatic backup (favourite manila people too), gps profile selection, planned auto-reboot, ramdisk, mobile upx (upxlist.txt), personal tweaking (by reg files now) + all the "safe" battery/speed tweaks I collected in several years, 3/4 rows selection, mail + attachments & documents moved to "Internal Storage", etc... note: the rom is fully UC/UC2 compliant too
Modded smooth violet buttons in keypad, commmanager, calculator & usbtopc applications, menu enhance
Connection Setup is NOT included, you can find 3 versions in extra cab repository (at top page): 1st from 2.00 rom (China included), 2nd from 2.03 (China NOT present) & the 3rd is the Topaz porting; install one of them like a standard cab (put always in your CAB folder); if you install/uninstall separately remember to restart to see changes
Steps to proceed with this ROM installation (only 1st time) :
before flash read here carefully all news related to sUC (because is included & active)
download latest rom from one of the mirror specified at top page and look in my signature for a fast upgrade procedure
after rom installation sUC will start asking you: configure general speed & GPS profiles; remove ActiveSync time change queue (stop popup every 5 min); left/right softkey configuration; CAB & CABi + REG + EXE + CPY installation/execution (as mentioned above) + upx compression phase, then choose backup method & eventually load a restore, restore previous saved Start Menu and for finish reboot to apply changes
then you can re-organize shortcuts in your "\windows\Start Menu" directory to fit your needs, then run the script "backupStartMenu", this will make a copy of your "final" start menu directory, useful to preserve your original Start Menu structure (in this way it can be restored automatically on next flash)
the last important folder (always under "Backup and Restore" directory) is "pimbackup", under this directory will be saved automatic pim backups during night (contacts/sms/call logs/et cetera)
some notes to know :
I don't like to get out every time the stylus, in my way the phone should be easily used with just one hand, so this rom is designed, where possible, to be used just with fingers: vertical bar is fatter, icons are more spaced & system font is bigger
pimbackup is enabled to make scheduled (automatic) backups every day at 4.00AM, remember for 1st to make a restore at 1st installation (a menu will presented at 2nd boot for this)
to speed up a bit the whole system & get off ActiveSync popping up every 5 minutes answer "OK" when asking to remove ActiveSync time change queue (of course ActiveSync will work normally when connected trough usb cable) & remember also to disable automatic checks (from AS application select Menu, then Schedule & put both to Manual, close tapping X & launch recover ram script... this will close automatically AS & will clean the queue)
about upx compression only exe files coming from cab installation can be compressed, existing exe files (cooked in the rom) can't be touched
I strongly suggest to upgrade your radio version too (I'm currently using 1.13.25.24, anyway find your best), 03 & 05 are really outdated, if you don't know where find new/good/tested radios download always at CAB repository (at top page or in my signature)
DO NOT remove the (automatic created) hibernation file "SwapImgDoNotRemove" because it's a copy of your cache, NOR remove files inside Ramdisk (the original cache) & neither remove MAIL folder under "Internal Storage\Backup and Restore" because from V05 mails are stored there
CAB installation is made seeking alphabetic sort, so keep it in mind when installing cabs that need a specific sequence
keep in mind that many cabs to work properly need to be installed into main memory (so not CABi)
CABi installation isn't perfect & doesn't work with languages different from ENG/USA, it work at 100% with simple cabs such as games, sometimes it fails on complex cab (license accept & various boring confirmation... such as iGO)
to restore the boot image (splash) to the original one (all black) simply download & install this package
special keyboard note: there is ONLY ms-keyboard as default, this because any keyboard set takes a lot of memory & registry becomes fatter, so install just the one you prefer (look always at repository below or in my signature)... so for example you can choose between FingerKeybd (very nice, download from XDA & here a simple guide to restore automatically after every flash) or Rhodium_EzInput (add Rhodium_EzEngine to have also T9 support... this T9 library works also with FingerKeybd) & above all remember that must installed during 1st setup, so don't install manually but copy your cabs in the CAB folder
WHY ALL THIS PROCEDURE?? in few words... I was very tired to re-install everything from scratch after a new installation/flash... so I thought about an easy way to have a fast & real "restore" after every flash
bye,
davide
ps: dia duit in gaelic means "good day"
Hm, this looks very interesting !
Looking forward to test your ROM !
it does look intresting. 1.96, optimized png and wav, and new drivers is what im looking forward to. TF3D version sticks out though, 1.2.345 is current, i thought maybe a newer version whould be included.
On your site : ROM_Diat_Duit_v01.diamimg.nbh - size: 82Mb
It's for test and it's : V1.96.710 ??
Thx for you futur rom ;-)
Seems interesting,but i didn't understand a thing:i can install my cabs in the "old way" too?
I explain:i usually flash the rom and then install all programs...can i do this with your rom or not?
Blazeitup123 said:
it does look intresting. 1.96, optimized png and wav, and new drivers is what im looking forward to. TF3D version sticks out though, 1.2.345 is current, i thought maybe a newer version whould be included.
Click to expand...
Click to collapse
no no that version isn't "newer"... that version is different because isn't native for diamond but it was adapted (from raphael if I remember well) but has some (small) bugs, the last one for diamond is 1.1.34575..., anyway there is no need to use the adapted one ver 1.2 because benchmarks speak clearly, there aren't significant speed improvements
suiller said:
no no that version isn't "newer"... that version is different because isn't native for diamond but it was adapted (from raphael if I remember well) but has some (small) bugs, the last one for diamond is 1.1.34575..., anyway there is no need to use the adapted one ver 1.2 because benchmarks speak clearly, there aren't significant speed improvements
Click to expand...
Click to collapse
..recommand to install it or not?
Your development is y new area in flashing!!
sure... simply put ALL your cabs in the "CAB" directory, after rom installation it will ask to install "your" cabs
suiller said:
sure... simply put ALL your cabs in the "CAB" directory, after rom installation it will ask to install "your" cabs
Click to expand...
Click to collapse
....looks nice!
Bugs:
Connection Setup: Error in Database
Sounds: Ring-WindowsMobile -> Ring tone error
perfect... thank you very much, I NEED this kind of infos, really hard to test alone
I'll look "sas" tomorrow morning
you're fast
I confirm both bugs, the 2nd is easy, that sound is not present, I have to add it...
again thx
Seems interesting,but i didn't understand a thing:i can install my cabs in the "old way" too?
I explain:i usually flash the rom and then install all programs...can i do this with your rom or not?
°Dexter° said:
Seems interesting,but i didn't understand a thing:i can install my cabs in the "old way" too?
I explain:i usually flash the rom and then install all programs...can i do this with your rom or not?
Click to expand...
Click to collapse
sure, simply create a called: "CAB" directory in you storage card (the BIG one), then copy all your cabs in that directory and then you can proceed to flash this rom
bye,
davide
Release
Hi,
my first impressions:
Fast & Nice!!!!!!
When can we download the bug-fixed version?
+ 1 Bug?
Internet: Launch Browser: nothing happens..
Great work!!!
Chris
cyron_at said:
Hi,
my first impressions:
Fast & Nice!!!!!!
When can we download the bug-fixed version?
+ 1 Bug?
Internet: Launch Browser: nothing happens..
Great work!!!
Chris
Click to expand...
Click to collapse
well, opera wasn't included for 2 reasons, the 1st one because many don't like it, they prefer skyfire for example, the 2nd because the version included in this original rom was a bit outdated, so you can download from here the latest beta version of Opera mobile, I'm using it from 2 days and it works very well
bye,
davide
Hi,
just flashed your rom.
nice addons and feels very fast.
there's a bug in the phone settings from comm manager.
i cannot close the settings the normal way.
so all settings beside services cannot be saved.
any solution for this?
greetz
Network Adapters
HI,
what is a "Microsoft null Ethernet Miniport Driver"?
The word "null" sound a bit strange..
what do you mean for "close in the normal way" ?
thank you,
davide
Hello,
I'vejust installed it and everything is working fine... And quick!
Gratulations for your work!
I've noticed that the icons from some programs are being showed more then once.
I'll continue testing it and give you more feedback.
it's a virtual driver, it can be used by the system for network emulations, like for ex vpn
As is.
Just press the "!COOK.CMD" file. (or make your changes before)
Old opinion:
>>8M of PP - after long time of testing looks as the optimal size for performance/RAM.<<
New opinion:
12M PP looks bit more responsible to interface.
New packages & drivers.
Tweaked several packages - for less memory use.
Tried to put all possible configs in one OEM/xxxconfig folder.
UC ready, - look to _ADDS/Internal Storage forder for example.
Mark all content of "Install" forder as "read only". Or you loose it after install or hard reset.
The best way - look inside "provision.zip" and make your own config file. Put it in "Install" folder and line as
"XML: \Storage\Install\provider.xml" to "sdconfig.txt".
Password for provision.zip you can find at the help page of Connection setup.
You need unsigned HardSPL!
Don't forget about hard reset after first install & make content of "Internal Storage/Install" READ ONLY!
RESOURCES
"LEGO": http://rapidshare.com/users/JW7QII
Snapshots: http://rapidshare.com/users/7L0TM7
Cabs: http://rapidshare.com/users/E8A83X
-=NEWS=----------------------------------
[2009.01.05]
MSXIP21109 & SYS21109(XIP inside) added to "Lego" repository.
-=NEWS=----------------------------------
------Check the time of upload, new version could be there: not the all changes going to the "NEWS" category -------
P.S. Remark for all:
I open this thread for people, who want to make own rom, but don't want spent the time for brutal operations.
Not all components is "mondi's original", - big thanks for
bepe,
swtos,
Niki,
Vic5870,
AVLev,
Prewien,
lexxirae,
and others for ideas and work.
It's only "timepoints" of my kitchen. With bugs, mistakes etc.
Will be glad to see opinions, founded bugs, new ideas.
EVERYBODY CAN USE IT AT ALL, if they use it for private ROM or follow the same "open" politics.
i get errors when extracting. winzip says its corrupt and win rar says invalid or corrupt authenticity information. win rar will complete the extration, but i'm not about to flash anything when there are errors. maybe upload again?
MD5:
18ebc1fbaaca73df8ff6124ad4296db3 *1.97.20755_Diamond.rar
19befa01daf491d6c838fa8d38d8096a *KITCHEN_20755_WWE.RAR
2bdceea4e5642f9f4066ed858041c086 *1.97.20755.nbh
Check it.
I'm downloading back now. Will see.
Used winrar 3.80
..............
1.97.20755_Diamond.rar has checked: passed
1.97.20755.nbh has checked: passed
KITCHEN_20755_WWE.RAR has checked: passed
Thanks man,
going to try it now
If I can do anything, just let me know...
hi,
at first, i have the same problem with extracting (3.8) and authentification,
but it extracts ... i dont know, if some files wouldnt extract?
the second is
"AAAAAAAAAAAAAAAAAAAAAAARGH" !
where you are the last weeks during i flashing my rom with kaiserkitchen
(it's very good, but for beginners its very strong ... with a liitle time spend
and reading here and reading there its gone) ?
i cooked my own rom ... i think its 3 houers before ...
its always the same - iam finishing with this one - than an other cooker/flasher puts a new thread and all the works begin at zero.
but that is it what we love i think.
i will use my rom for 3 or 4 houers than i will test/use your kitchen
thank you for your work.
okokur
p.s.
my english is not so good and the time its gone to morning,
my comment to your thread means positiv/happy. it dont means any angries
Hello!
I repeat: it's not "my" kitchen.
"My" is only changes in OEM/SYS/ROM folders.
I like this kind of kitchen for useful "stepping".
Forgot, where did I find it. Somewhere here
Bit later will be update to 20757 (HD ported).
This kitchen seems of no use to me.
It needs .nb, .wrn and other files which are'n present.
Maybe some explanating how to get them, I would like to try it.
pietrucci said:
This kitchen seems of no use to me.
It needs .nb, .wrn and other files which are'n present.
Maybe some explanating how to get them, I would like to try it.
Click to expand...
Click to collapse
???
Just press !COOK.CMD.
May be damaged archive? Check the md5 sum to arh.
Ok, sorry it's working now...
Another question: a lot of files are from date 10th of July, for example the manila files. Does this mean these files really are so old???
The latest versions of manila are of a newer date are they?
pietrucci said:
Ok, sorry it's working now...
Another question: a lot of files are from date 10th of July, for example the manila files. Does this mean these files really are so old???
The latest versions of manila are of a newer date are they?
Click to expand...
Click to collapse
Marked "stable" original Diamond manila.
If you want the alternative - look to the "_OUT" folder.
Updated to Blackstone's XIP/SYS 20757.
Manila updated to last "official": 1.1.35097.1_1630.38
Style to gray.
I just got my Diamond 2 weeks ago. I cook my first ROM using your kitchen tree but I have some questions:
1. Why the setting up screen is all black ? I thought there were some sort of Windows Mobile 6 background
2. I tried to set up bluetooth but it shows me a message box with something like "No bluetooth hardware"
I follow the instructions by just clicking !Cook.cmd. I didn't change anything in your packages. Did I do something wrong ?
Please advice. By the way, thanks for this kitchen tree.
dafeke said:
1. Why the setting up screen is all black ? I thought there were some sort of Windows Mobile 6 background
Click to expand...
Click to collapse
It's just my choice: less using rom/ram memory. And not important at all. You can use yours pictures. It is the kitchen, isn't it?
dafeke said:
2. I tried to set up bluetooth but it shows me a message box with something like "No bluetooth hardware"
I follow the instructions by just clicking !Cook.cmd. I didn't change anything in your packages. Did I do something wrong ?
Click to expand...
Click to collapse
I'll see. I use BT very seldom. Didn't check it, just put the packages.
mondilv said:
It's just my choice: less using rom/ram memory. And not important at all. You can use yours pictures. It is the kitchen, isn't it?
I'll see. I use BT very seldom. Didn't check it, just put the packages.
Click to expand...
Click to collapse
I coocked my ROM with version 20755: everything's fine here with bluetooth (and all other stuff). I use bluetooth for my carkit, works fine.
I benchmarked this ROM with my usual benchmarks: it's pretty fast compared to others! I left out Opera and Google Maps, but I don't think that makes a big difference in benchmark results.
I will try your Blackstone upgrade this evening, I'm curious if that's faster than the 20755... (in fact I don;t think so).
There is one strange thing in this one: I can't change pagepool. Using pagepoolchanger.exe it says it can't find the right address...
Keep you informed...
Thank you mondilv for the this kitchens! Great job
pietrucci said:
I coocked my ROM with version 20755: everything's fine here with bluetooth (and all other stuff). I use bluetooth for my carkit, works fine.
I benchmarked this ROM with my usual benchmarks: it's pretty fast compared to others! I left out Opera and Google Maps, but I don't think that makes a big difference in benchmark results.
I will try your Blackstone upgrade this evening, I'm curious if that's faster than the 20755... (in fact I don;t think so).
Click to expand...
Click to collapse
Agree. I did benchmarks too. (?)
BT fix - in the first post (from 20755 SYS). Works now.
pietrucci said:
There is one strange thing in this one: I can't change pagepool. Using pagepoolchanger.exe it says it can't find the right address....
Click to expand...
Click to collapse
pagepoolchanger.exe don't works to Diamond (use search - don't remember, where is the info). Use hex editor.
...and NB container is reduced by uldr, - only one needed address.
pietrucci said:
Keep you informed...
Click to expand...
Click to collapse
Thanks for cooperation!
mondilv said:
Agree. I did benchmarks too. (?)
Click to expand...
Click to collapse
I suppose you use the ? because you don't know why I make this remark? Well, if you like take a look at my thread: http://forum.xda-developers.com/showthread.php?t=406640, you can compare this ROM with many others, all tested on the same device, under the same circumstances, more or less.. I will add this ROM's benchmark results later this evening.
mondilv said:
pagepoolchanger.exe don't works to Diamond (use search - don't remember, where is the info). Use hex editor.
...and NB container is reduced by uldr, - only one needed address.
Click to expand...
Click to collapse
PagePoolChanger DOES work on most 'normal' Diamond ROMs, I've used it many times before. But I guess it conflicts with the uldr thing... no problem.
here friend... like mentioned in a PM sent you this morning... I'm porting some pieces of your base sys/xip for including in my rom (dia duit), of course I'll mention that the base rom comes from your hard work
instead of upgrading the whole sys I prefer to choose faster/smaller dlls between different sys
anyway also my rom is open, because I strongly believe that this is the only way to proceed to a faster development... by sharing infos each other
but I'll prefer to share the whole kitchen on my 1st stable release, now we are at v08, because till now my rom has some bugs
thx mate!
bye,
davide
pietrucci said:
I suppose you use the ? because you don't know why I make this remark? Well, if you like take a look at my thread: http://forum.xda-developers.com/showthread.php?t=406640, you can compare this ROM with many others, all tested on the same device, under the same circumstances, more or less.. I will add this ROM's benchmark results later this evening.
PagePoolChanger DOES work on most 'normal' Diamond ROMs, I've used it many times before. But I guess it conflicts with the uldr thing... no problem.
Click to expand...
Click to collapse
here how to change PP on diamonds:
open final .nbh file with a hex editor (I use pspad)
search the following hex value: 389FE550089FE5
as you find it change next two numbers (in an original rom, these two values are 00 25)
search again for the same hex value, again you need to modify the adjacent two values (in case of an original rom, these two values are 03 25)
values:
for pp 0 Mb: 00 25
for pp 8 Mb: 02 25
for pp 12 Mb: 0C 26
for pp 16 Mb: 10 26
of course I wasn't able to find alone... I found thx to the great & nice Seatone
have fun
pietrucci said:
I suppose you use the ? because you don't know why I make this remark?
Click to expand...
Click to collapse
I was bad surprised too. Quite big diff between close versions. About 5%, isn't it?
After trying several combination of xip/sys me like 20755 at last time.
Or xip757/sys755 - no bad too.
pietrucci said:
Well, if you like take a look at my thread: http://forum.xda-developers.com/showthread.php?t=406640, you can compare this ROM with many others, all tested on the same device, under the same circumstances, more or less..
Click to expand...
Click to collapse
I good know your thread
pietrucci said:
I will add this ROM's benchmark results later this evening.
Click to expand...
Click to collapse
Early, I think. Can't to call its rom stable. Just found more bugs, think not the last for today (lighting for missed call is absent; green element in manila)
I return to home now, so new version could be tonight.
pietrucci said:
PagePoolChanger DOES work on most 'normal' Diamond ROMs, I've used it many times before. But I guess it conflicts with the uldr thing... no problem.
Click to expand...
Click to collapse
May we use different versions?
"My" looks properly worked, but by devhelth.exe - PP didn't changed.
SuperJustKitchen v0.9 Released.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices, eventually.
Word of warning:
Not all EXT's have been tested or modified for the every device. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.) Some packages will only be compatible with some devices.
(I'm no longer updating each thread separately for each device but just updating my site and posting the release info here. I will only update each thread to say that a new version is out.)
**Warning**
Before using this kitchen, you MUST read the whole thread. Any questions that have been answered will be ignored. This is your only warning.
**Disclaimer**
I am not responsible for any damage that may be done to your phone with a ROM created in this kitchen.
I am not responsible for any damage done to your computer.
I am not responsible for anything... at all.
Introducing SuperJustKitchen!
SuperJustKitchen is based on [http://forum.xda-developers.com/member.php?u=843218"]airxtreme[/URL]'s osKitchen Zero. All credit on for the kitchen backend goes to him.
Features
A completely stripped ROM. (Work in progress for some devices.)
LZX and XPR compression (Also option for No compression.)
Auto clean files that are language specific or DPI specific that your ROM does not need
Auto port missing language MUI files
Automatic rec'loc'ing for devices without native 6.5 nk's
6.1 and 6.5 support
Auto XIP and SYS porting
Auto NBH packing
Tool to convert OEM packages to EXT packages
Auto file conflict fix (don't have to removing older file that conflict (not that there are any. )
Save custom ROM settings (for cooks for multiple ROMs)
Cook multiple languages at the same time with the same ROM settings (Have to add language support yourself. I removed the required MUI's a while back because they made updating the kitchen and adding devices a nightmare.)
MUCH better organization of EXT packages
Active development instead of a program that is no longer being developed
Cleaner and easier to use interface
A built-in and customizable Tutorial section
And more!
Builds included
21056 - WM6.1
23658 - WM6.5 with new redesigned GUI
At the moment, this is an ENGLISH (WWE) only kitchen. This might change...
NOTE: In order for me to keep track of whether my time was well spent or wasted, if you use this kitchen to make a ROM, please either include SJK in the name or just mention that it was SJK cooked in your ROM's thread.
NOTE: This kitchen assumes that you know how to flash through SD, recover from a bad flash and are able to backtrack your steps to figure out how you broke your own ROM. If you do not understand these, please learn them first. Do not PM me asking me. I have written numerous walkthroughs on all these except on how to backtrack your steps. For that, just remember what you're doing as you do it and keep backups.
If you find any issues, PLEASE report them to the bug tracker in my website. It will help me make this kitchen better!
ENJOY!!!
Well ... I have repaired my Hermes yesterday and now I'm trying ROMs here and none of them really suits me.
So your SJK came in the right time. I did few ROMs for myself last year, so I'm gonna try your SJK probably this evening.
And if it will work flawlessy, I'm considering donation.
Impressive..
Downloading and will hopefully be trying this out soon.
Let me know if you run into any problems with the native nk and changing the pagepool. (I don't have a test device, unfortunately.)
ivanmmj said:
Let me know if you run into any problems with the native nk and changing the pagepool. (I don't have a test device, unfortunately.)
Click to expand...
Click to collapse
I am cooking a 23529 native build now and will know here soon
Well, I have built 6.5.x ROM with native kernel and 16MB pagepool. I didn't add anything in the ROM and I'm missing Camera, CommManager, ClearStorage and stuff like this in the ROM. Suppose I have to add them externally.
Now I'm gonna try adding some things and changing pagepool etc.
pajousek said:
Well, I have built 6.5.x ROM with native kernel and 16MB pagepool. I didn't add anything in the ROM and I'm missing Camera, CommManager, ClearStorage and stuff like this in the ROM. Suppose I have to add them externally.
Now I'm gonna try adding some things and changing pagepool etc.
Click to expand...
Click to collapse
You have to actually add them in the EXT packages. They are not built in so that you can choose your own. I stripped the OEM and created packages of all required programs and made them into EXT packages.
Ooops, my bad. I've just extracted EXT, SYS, SJK, HERMES archives and didn't check the wrong paths. Because everything puts itself in Sources and the EXT has got Working_Folder/EXT instead of Sources/EXT.
I was wondering why I can't see any EXT things in the osKichten.exe
I must be doing something wrong then cause mine won't go past the boot screen using native. I used everything default. Will try again.
This has happened to me the first time i tried this Kitchen ... then I've tried it again and it worked.
But I'm havning problem with the EXT. I can't select packages from the folders. I can just select folders. :\
EDIT: Ok, I surreder - where are the C_cingular, C_xyz.cab things? I can't find them anywhere to get rid of them.
pajousek said:
Ooops, my bad. I've just extracted EXT, SYS, SJK, HERMES archives and didn't check the wrong paths. Because everything puts itself in Sources and the EXT has got Working_Folder/EXT instead of Sources/EXT.
I was wondering why I can't see any EXT things in the osKichten.exe
Click to expand...
Click to collapse
You have have accidently downloaded v0.7 of the EXT which is a COMPLETELY different kitchen.
This has happened to me the first time i tried this Kitchen ... then I've tried it again and it worked.
But I'm havning problem with the EXT. I can't select packages from the folders. I can just select folders. :\
EDIT: Ok, I surreder - where are the C_cingular, C_xyz.cab things? I can't find them anywhere to get rid of them.
Click to expand...
Click to collapse
I'm not sure what you mean. Can you please post a screenshot?
ivanmmj said:
You have have accidently downloaded v0.7 of the EXT which is a COMPLETELY different kitchen.
I'm not sure what you mean. Can you please post a screenshot?
Click to expand...
Click to collapse
Well, the first issue (not showing apps) was cause by the 0.7 version instead of 0.8 ... i really should give more attention to what I'm downloading.
The EDIT line, about C_Cingular_GoodEmail*.cab, PT_Cingular_Whitelist* etc. - those are apps which are automatically installed after first boot. I suppose it's cause by the line "EXEC:\Extended_ROM\autorun.exe" in PreConfig.txt in OEMOPERATORS. But - where does that autorun.exe has it's config? and where's Extended_ROM in the Kitchen? Because afaik it isn't the same as EXT?
EDIT: I got an idea - aren't those cabs just remains of the ExtROM from AT&T ROM? Then, howto delete them? By making my ROM BigStorage? :|
pajousek said:
Well, the first issue (not showing apps) was cause by the 0.7 version instead of 0.8 ... i really should give more attention to what I'm downloading.
The EDIT line, about C_Cingular_GoodEmail*.cab, PT_Cingular_Whitelist* etc. - those are apps which are automatically installed after first boot. I suppose it's cause by the line "EXEC:\Extended_ROM\autorun.exe" in PreConfig.txt in OEMOPERATORS. But - where does that autorun.exe has it's config? and where's Extended_ROM in the Kitchen? Because afaik it isn't the same as EXT?
EDIT: I got an idea - aren't those cabs just remains of the ExtROM from AT&T ROM? Then, howto delete them? By making my ROM BigStorage? :|
Click to expand...
Click to collapse
Fixed for next build. ^_^
For now, just remove the preconfig.txt file.
Please report any future bugs to the bug tracker. (There are way too many threads to keep track of all of them.)
I've registered to bugtracker ... and the confirmation email didn't come, so I can't post new bugs. I guess I have to post it as guest?
pajousek said:
I've registered to bugtracker ... and the confirmation email didn't come, so I can't post new bugs. I guess I have to post it as guest?
Click to expand...
Click to collapse
I activated you manually. I'm not sure why it's not sending out the emails. I'll look at the code of the site.
I take it this isn't bigstorage? If not do you plan to have one bigstorage? I'd like to be able to do bigstorage in 6.1 and 6.5 and this looks like my best option..
thanks
Since the bugtracker is broken:
These things are buggy:
any Connection Wizard - I can't get it to work
Dialer - Every dialer is buggy and if I try to cook there else OEM Dialer (found by google), it doesn't work too
ClearStorage - doesn't do hardreset
Then I'd appreciate battery.dll which is by 1% and not 10%.
Making the ROM BigStorage would be a big plus too. And AFAIK I shouldn't have 39MB RAM with 6MB PagePool? 39MB is for 16MB PP, right?
MrDSL, are you experiencing anything of these issues too?
pajousek said:
Since the bugtracker is broken:
These things are buggy:
any Connection Wizard - I can't get it to work
Dialer - Every dialer is buggy and if I try to cook there else OEM Dialer (found by google), it doesn't work too
ClearStorage - doesn't do hardreset
Then I'd appreciate battery.dll which is by 1% and not 10%.
Making the ROM BigStorage would be a big plus too. And AFAIK I shouldn't have 39MB RAM with 6MB PagePool? 39MB is for 16MB PP, right?
MrDSL, are you experiencing anything of these issues too?
Click to expand...
Click to collapse
Strange. I'll have to test the connection wizards on the wing.
The dialers work fine on the wing. Does the dialer named Hermes work? (It's directly from the Hermes.)
ClearStorage - Your device might require an older clearstorage. I'll have to look for one.
That sounds like the native 6.5 nk isn't getting its pagepool changed.
I'll see about that. The Hermes 6.5 nk is notorious for most pagepool tools not working on it.
As far as the bigstorage. Give me a link to it and I will see about including it.
well, i'll try the not-native kernel (what disadvantages it has anyways?)
about bigstorage & clearstorage & dialer - i'll do some searching and testing and send you working links (since you don't have testing device).
ivanmmj said:
Strange. I'll have to test the connection wizards on the wing.
The dialers work fine on the wing. Does the dialer named Hermes work? (It's directly from the Hermes.)
ClearStorage - Your device might require an older clearstorage. I'll have to look for one.
That sounds like the native 6.5 nk isn't getting its pagepool changed.
I'll see about that. The Hermes 6.5 nk is notorious for most pagepool tools not working on it.
As far as the bigstorage. Give me a link to it and I will see about including it.
Click to expand...
Click to collapse
I have yet to get a ROM past the boot screen So I dunno..