Well, i tryied to see what information i retrieve with the french rom of qtek 9100 executable, u know, the screen in wich u can get info about the device language, image versiion and model make. Followed the standard procedure , CID unlocked, backed up the rom, no need to sim unlock cbecause it was no locked. Here comes the weird part: the screen that was supposed to return the info (where u still can quit),didn't return any info, it was like upgrading nothing to nothing. It's a g3 and i did the normal way to CID unlock it. now whehn i reboot the phone, the SPL remained the same (1.01), but the IPL has changed from 1.01 to IPL 1.01.0000. Why those four zeros?...neve knew.Anyway i didn't installed any rom , because of no info on that screen...was afraid not to damage my device . If i want to install a new rom do i have to CID unlock again, even if i didn't installed any?
Well, i tryied to see what information i retrieve with the french rom of qtek 9100 executable, u know, the screen in wich u can get info about the device language, image versiion and model make. Followed the standard procedure , CID unlocked, backed up the rom, no need to sim unlock cbecause it was no locked. Here comes the weird part: the screen that was supposed to return the info (where u still can quit),didn't return any info, it was like upgrading nothing to nothing. It's a g3 and i did the normal way to CID unlock it. now whehn i reboot the phone, the SPL remained the same (1.01), but the IPL has changed from 1.01 to IPL 1.01.0000. Why those four zeros?...neve knew.Anyway i didn't installed any rom , because of no info on that screen...was afraid not to damage my device . If i want to install a new rom do i have to CID unlock again, even if i didn't installed any?
Well, i tryied to see what information i retrieve with the french rom(QT_FR_9100_2170706_21707106_20710_180406) of qtek 9100 executable, u know, the screen in wich u can get info about the device language, image versiion and model make. Followed the standard procedure , CID unlocked, backed up the rom, no need to sim unlock cbecause it was no locked. Here comes the weird part: the screen that was supposed to return the info (where u still can quit),didn't return any info, it was like upgrading nothing to nothing. It's a g3 and i did the normal way to CID unlock it. now whehn i reboot the phone, the SPL remained the same (1.01), but the IPL has changed from 1.01 to IPL 1.01.0000. Why those four zeros?...neve knew.Anyway i didn't installed any rom , because of no info on that screen...was afraid not to damage my device . Still, the qtek provided here for WIZA200,(RUU_Prodigy_1010708_108_Qtek_FRA_SHIP) returned this info.Wich one is correct?, If i want to install a new rom do i have to CID unlock again, even if i didn't installed any?
hi all, first of all I apologise if this has been asked before, but i did try a search.
I wanted to know if i can change the spl version after unlocking with spl 1.24? i've read you can change the rom and radio version, but no-one seems to have asked if you can change spl and the sim unlock remains?
Thanks.
Also if i was to return it to stock spl 1.35. Would the phone still be sim unlocked?
Hey Sandwiches,
Changing your HARD SPL doesn't effect unlocking status what so ever...
Enjoy!
Hi, I recently bought a new Rhodium on ebay from Hong Kong. I'm a junior when it comes to flashing but did succeed with Tael on my previous Touch Pro 1.
On the Rhodium I was looking for a rom with speed and a low bug count and choose the Silence or Energy roms. I could flash neither even after unlocking. I flashed Mighty and I thought successfully but when I rebooted only had the HTC screen then stars and I thought I'd bricked. Took it to my local shop who played with it and then handed it to a guru and came to the conclusion it was dead. I continued and found on the tricolour boot screen it responded to a usb connection. It is now working but the only rom it will accept is from the site.
http://forum.xda-developers.com/wiki/index.php?title=HTC_Rhodium/Shipped_Roms
and is the
HTC RHOD100 n/a 1.86.401.0 (67102) WWE
I don't know whether I have a GSM or CDMA phone but it is a T7373
Is it possible to load Silence or another fast custom rom?
Thanks
In essence
I believe the T7373 is the Rhodium 100 and that it is a GSM phone.
So I should look for ROM's on XDA and not on ppcgeeks
My question now boils down to why can I only flash the stock ROM and if I try the Silence ROM, for example, it says not suitable for this device.
Hi
when you say "after unlocking" do you mean you installed HardSPL, found here?
http://forum.xda-developers.com/showthread.php?t=550131
HardSPL
Yes I've successfully install HardSPL
bombardy said:
Yes I've successfully install HardSPL
Click to expand...
Click to collapse
@ triple screen does it say 1.00 Olinex?
and when its a wwe rom, i recommend to use a wwe rom again, u say u want to use a energie rom, what exactly is happening? when u flash it is can hang up to 10 minutes, so thats why i want to know it . maybe we can help..
The Rhodium Model Number can be found at the sticker in the battery compartment under the battery...I'm curious about the purchase of the device from Hong Kong and whether or not it's an official HTC and if not, would that have anything to do with it.
Rhodium 100
Thanks for the replies
When I try flashing it gets to 1% then PDA Phone ROM Update Utility 3.27.4.3 says
Error [244]:Invalid Model ID
This Update Utility cannot be used for your PDA Phone. Please check your Update Utility
The tricolour screen says
RHOD*** 32M SS-BC
SPL-0.85.0liNex
MICROP(LED) 0x0A
MICROP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
512,512 796,838
782,190 226,192
237,836 Calibrated
Under the Battery
Thanks for the replies
Under the battery is printed
RHOD100 5DVC=1A FCC ID NM8RHOD100 Made in Taiwan
this is what I get after a google
http://forum.ppcgeeks.com/htc-touch-pro/57578-error-244-invalid-model-id-reflashing-stock-rom.html
Are you sure you got the correct (GSM) version of HardSPL?
You may have to relock and then rerun HardSPL
dodo2244 said:
this is what I get after a google
http://forum.ppcgeeks.com/htc-touch-pro/57578-error-244-invalid-model-id-reflashing-stock-rom.html
Are you sure you got the correct (GSM) version of HardSPL?
You may have to relock and then rerun HardSPL
Click to expand...
Click to collapse
indeed are you sure its not a cdma? , however A ROD 100 is definetly a gsm but you never know in other countries, by the way the last hardSPL is 1.00 Olinex.
let us know.
Hard SPL
Thanks for your help. Have relocked then unlocked using Hard SPL. Latest I can find is 0.85 Olinex. Still the same error message when I try to flash anything other than the stock ROM
Locking and Unlocking
Well, I don't think I'm gonna get any more advice. So my conclusion is that my phone is not properly unlocked. I've tried the relocker and unlocker posted by OliNex at the top of this board. Can anyone tell me what I see on my tri-colour boot up screen which tells me whether the phone is locked or unlocked? Thanks
i also bought one from hongkong on ebay from dealrus or something and is also a rhod100 and have a energy rom on it so if bought it from the same seller it is possible
bombardy said:
Well, I don't think I'm gonna get any more advice. So my conclusion is that my phone is not properly unlocked. I've tried the relocker and unlocker posted by OliNex at the top of this board. Can anyone tell me what I see on my tri-colour boot up screen which tells me whether the phone is locked or unlocked? Thanks
Click to expand...
Click to collapse
eej bombardy,
the following part says its unlocked :
RHod 100 32M SS-BC
SPL-0.85 Olinex
that must stand there, then you know its unlocked.
greetz