Related
i dont know what's wrong, ive owned this dash since march. updated to wm6 when it came out, then stopped giving a hoot after finding out that SNappunlock wont work on my dash.
i noticed people here found a very nice dash rom that i want to flash to so badly, but i learned that this requires appunlock in order to get the CID bypass to work
after searching around for wm5 (took about an hour) so i can flash back just so i can appunlock, then flash to the better rom. i found it! all thanks to BGNiko
you think i'm done with my problems, right? well i go to flash to wm5, and during the flashing session, the screen brings me to that RGB before the rom change happens, but no go! it tells me my usb cable isnt hooked up even though it is. ive had no problems re-flashing to the wm6, so the cable isnt the problem.
anyone ever have problems reverting to wm5? is there a solution?
thanks in advance
ps: i have us tmobile
uhh... did you try again?
i had the same thing happen to me. tried again, same thing (same message that you got). restarted the computer, tried again... presto. worked fine.
so long as the flash process doesn't start, your phone should be fine. it's just a matter of getting the computer to talk to the phone. it might be as simple as a computer restart... or trying a differnt usb port or something.
well, took your advise.. didnt work, but thats because i have vista (go figure). did it on my other comp and it worked
though i'm still faced with the appunlock problem
appunlock didnt work, and every time i go to execute sda unlock it tells me that its "not a certified windows CE edition"? or something to that matter
any help would be greatly appreciated
edit: wow, so i am an idiot. i thought the apps had to be excecuted from the phone.
anyway, did the uspl cid unlock. turned my screen white instead of black, but i'll take it
So i had 6.1 but it kept freezing, so I went back to 6.0, and was going to install 6.1 again...and now the screen goes to three colors, and then the installer box says "the image file was corrupted, please check your update utility"
and i dont know what to.
any help?
please and thank you.
First of all you the Kavana's & Rickwyatt's works on T-Mobile Dash, HTC S620 & S621 and you have to make sure your phone is unlock (use SDA Application unlock) to do it.
Try to use on these Upgrades, I recommend you Kavana's 6.1 cuz is easier to install with the (.exe) file but If you want T-mobile MyFaves the Rick's version came with it, Rick is a little more complicated for a lot of files included in the installation package but If you run (install.bat) and follow the steps. And Follow the instructions.
Kavana's: http://forum.xda-developers.com/showthread.php?t=374890
Rick's: http://forum.xda-developers.com/showthread.php?t=397845
Good Luck
Adavid
By the way, if the Phone got frozen remove the battery...I got T-mobile DASH and I have install both and work's good, the problems with Rick's the open applications close automatically if you don't use it.
Good luck again
Rick's 6.1
When you unzip Rick's package you have:
USPL <folder>
Auto
EnterBootloader
rapidtool
ROMUpdateUtility
.
.
.
Just click on Auto and follow the steps.
cant install rickys kavana rom
hello-i need help pls
while trying to execute ricks rom by autobat, after a few steps an error pops in that says cant find rom update utility, make sure u typed right..etc
can someone help
thx
*staring at the stickys...looking at the n00bs guide to installing 6.1*
*pointing and laughing at all who didnt read and follow it*
*going to bed*
gixxum said:
*staring at the stickys...looking at the n00bs guide to installing 6.1*
*pointing and laughing at all who didnt read and follow it*
*going to bed*
Click to expand...
Click to collapse
Think i may have a link to it on my sig just incase they can't read threadz?
Try This it will help a lot.
well
maybe im n00b- but still, while trying to flash i get an error massage that "windows can find romupdate utility" my phone is unlocked. so, ill appriciate ur help/
Did you UNZIP the zip file prior to running the auto.bat file??
anyone have any luck getting ubuntu installed on a s620? i get a message that says "you deserve to be punched square in the mouth." i want my phone to perform as a dns server, router, network storage and cell phone. it is app unlocked.
gixxum said:
anyone have any luck getting ubuntu installed on a s620? i get a message that says "you deserve to be punched square in the mouth." i want my phone to perform as a dns server, router, network storage and cell phone. it is app unlocked.
Click to expand...
Click to collapse
The correct distro you need is dashuntu, wow and i thought you knew it all
Can't remember off the top of my head what ubuntu is translated into? Something about tree huggers, so now we can be Dash huggers
yes i have.
ive restored my xp to earlier point , now ive managed to install the rom.
for some reason i get a daily update from microsoft, seems to me they f*** my system.
the-light said:
yes i have.
ive restored my xp to earlier point , now ive managed to install the rom.
for some reason i get a daily update from microsoft, seems to me they f*** my system.
Click to expand...
Click to collapse
Glad you got it sorted.
On computer go Start\Control Panel\Automatic Updates and you can turn them off.
Turn off that Microsoft update B.S.
PLEASE ASSIST: I'VE RECENTLY UPGRADED MY CINGULAR/ATT 8525 HERMES UNIT TO WINMOB6 AND NOW CAN'T GET PAST THE INITIAL WINDOWS MOBILE SCREEN WHERE IT SAYS "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE BASED DEVICE." (THE TOUCHSCREEN SEEMS TO BE DISABLED) ALSO, NOW ACTIVESYNC WILL NOT CONNECT TO THE DEVICE. I'M AT A LOSS AS TO WHAT ELSE TO DO (TRIED HARD RESET SEVERAL TIMES WITH SAME RESULT). IF SOMEONE COULD POINT ME IN THE RIGHT DIRECTION - I'D SURE APPRECIATE IT.
ETUMON said:
PLEASE ASSIST: I'VE RECENTLY UPGRADED MY CINGULAR/ATT 8525 HERMES UNIT TO WINMOB6 AND NOW CAN'T GET PAST THE INITIAL WINDOWS MOBILE SCREEN WHERE IT SAYS "TAP THE SCREEN TO SET UP YOUR WINDOWS MOBILE BASED DEVICE." (THE TOUCHSCREEN SEEMS TO BE DISABLED) ALSO, NOW ACTIVESYNC WILL NOT CONNECT TO THE DEVICE. I'M AT A LOSS AS TO WHAT ELSE TO DO (TRIED HARD RESET SEVERAL TIMES WITH SAME RESULT). IF SOMEONE COULD POINT ME IN THE RIGHT DIRECTION - I'D SURE APPRECIATE IT.
Click to expand...
Click to collapse
hmm no need to scream.
Push the OK on left and power on right, and stick stylus in all at the same time. Re run the exe file while it is plugged in to active sync, and see. Which WM6 did you use?
Sorry I'm new at this. I used WM6.1. Which exe file do you want me to re-run. ActiveSync is offline....I can't get it to connect to the unit. Thanks for your assistance.
ETUMON said:
Sorry I'm new at this. I used WM6.1. Which exe file do you want me to re-run. ActiveSync is offline....I can't get it to connect to the unit. Thanks for your assistance.
Click to expand...
Click to collapse
Ok, since you're on ATT I suggest you follow my instruction above, get into tricolour screen (bootloader), and download this
from the post above you will get the shipped ATT rom. Don't worry if activesync is saying is not connected, just run the file. You will then get back to a WM6.
The phone originally came with WM5 and I was upgrading to mess around with the thing. I'm at the tricoloured screen and now downloading the files from RapidShare. Will this get me back to WM5 or to the upgrade. If there is a way, I like to try the HardSPL flash I've been reading about today - will this work on either WM version? Txs & Rgds.
ETUMON said:
The phone originally came with WM5 and I was upgrading to mess around with the thing. I'm at the tricoloured screen and now downloading the files from RapidShare. Will this get me back to WM5 or to the upgrade. If there is a way, I like to try the HardSPL flash I've been reading about today - will this work on either WM version? Txs & Rgds.
Click to expand...
Click to collapse
After you have flashed this WM6.0 you really need to flash hard SPL first, I thought you would have done that already.
Really please read this first before you brick your phone.
No that's the thing. I'm just finding out how I went about this all wrong and maybe shouldn't have been messing this in the first place. Anyhow, my bootloader screen reads like this:
HERM100
IPL-1.04
HERM100
SPL-1.40.Olipro
ETUMON said:
No that's the thing. I'm just finding out how I went about this all wrong and maybe shouldn't have been messing this in the first place. Anyhow, my bootloader screen reads like this:
HERM100
IPL-1.04
HERM100
SPL-1.40.Olipro
Click to expand...
Click to collapse
Well follow mrvanx guide, that's all I had to get on with few months ago.
Many thanks for the advice. So just to be clear I should first run the file I downloaded from RapidShare to get me back to a working WM version, then follow mrvanx guide to flash Hard SPL or viceversa...
ETUMON said:
Many thanks for the advice. So just to be clear I should first run the file I downloaded from RapidShare to get me back to a working WM version, then follow mrvanx guide to flash Hard SPL or viceversa...
Click to expand...
Click to collapse
I have not tried to hardspl a non working phone sorry so I have no experience with that. Give it a go first, and report back.
Still Stuck
zocster said:
I have not tried to hardspl a non working phone sorry so I have no experience with that. Give it a go first, and report back.
Click to expand...
Click to collapse
Nope, didn't work. Here's the report:
ERROR [260]: UPDATE ERROR
The update utility cannot connect to your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA phone.
Check the following:
1. The PDA Phone is connected to the USB cradle/cable.
2. The USB cradle/cable is connected to the PC.
Is there another way to establish comunication with the PDA other than through ActiveSync? Somekind of emulator box or binary software???
ETUMON said:
Nope, didn't work. Here's the report:
ERROR [260]: UPDATE ERROR
The update utility cannot connect to your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA phone.
Check the following:
1. The PDA Phone is connected to the USB cradle/cable.
2. The USB cradle/cable is connected to the PC.
Is there another way to establish comunication with the PDA other than through ActiveSync? Somekind of emulator box or binary software???
Click to expand...
Click to collapse
hmm weird, so have you got .net framework installed on your PC? try it again one more time while in bootloader, plug the phone to USB as long as you can hear the 'ding' sound you should be OK. I have 'bricked' my phone a few times and this always work. What are you trying to flash? the hardspl or the ROM?
Yes, today I upgraded to .net framework 3.5 when ActiveSync failed Microsoft Error took me to their website and offered me the option. I had been running 2.x .net framework and never had a problem would also use same ActiveSync with my old Axim X30.
Yes, I can hear the 'ding' sound and I was trying to run the file RUUWrapper.exe (Hermes ROM Upgrade w/ the option Force using SSPL).
well that shows the other way around doesn't work, so you need to get your phone to a working WM6 state, how is your download going from rapidshare? get it to boot loader mode again and flash that exe file.
Just completed that route - I ran the PDA Phone ROM Update Utility 3.12.3.7 - the process took about 10 minutes to go through 100%, then it restarted and stayed at the Window Mobile screen for little over minute (crossing my fingers), but then just showed the same message "Tap the screen to set up your Window Mobile based device." Please let me know if you have other avenues to try – It’s close to 4am here in Miami, but I'm not sleeping. I’m really glad you are able to assist with this mess – thanks a lot!
ETUMON said:
Just completed that route - I ran the PDA Phone ROM Update Utility 3.12.3.7 - the process took about 10 minutes to go through 100%, then it restarted and stayed at the Window Mobile screen for little over minute (crossing my fingers), but then just showed the same message "Tap the screen to set up your Window Mobile based device." Please let me know if you have other avenues to try – It’s close to 4am here in Miami, but I'm not sleeping. I’m really glad you are able to assist with this mess – thanks a lot!
Click to expand...
Click to collapse
so did you follow it through? and it didn't fix it? you have some bad blocks?
Unfortunately, you need to have some sleep, and read these when you wake up
http://forum.xda-developers.com/showthread.php?t=296722
http://forum.xda-developers.com/showthread.php?t=369434
zocster said:
so did you follow it through? and it didn't fix it? you have some bad blocks?
Unfortunately, you need to have some sleep, and read these when you wake up
http://forum.xda-developers.com/showthread.php?t=296722
http://forum.xda-developers.com/showthread.php?t=369434
Click to expand...
Click to collapse
what does bad blocks mean?
Okay, looks like I've got a Type 2c Brick Situation in my hands.... I think I will take your advice and get some rest and tackle this again later on. I really appreciate your assistance - will you be around again later?
Okay good day, I'm back on the trail. Found shipped ROM on WIKI for HERMES in the following thread - http://forum.xda-developers.com/showthread.php?t=277664
Downloading now...According to pof(moderator) it's a "new rom from the still unreleased Cingular 8525: HTC Hermes (HERM100) branded from U.S. Operator Cingular"
My only question then would be that this appears to be made for WM5 and I performed the WM6 upgrade which is what got me into this mess in the first place - so will there be any conflicts or issues I should now about? I'm about to go ahead with it - if anyone is out there and thinks otherwise, please advise soonest. Thx & rgds, Ed
ETUMON said:
Okay good day, I'm back on the trail. Found shipped ROM on WIKI for HERMES in the following thread - http://forum.xda-developers.com/showthread.php?t=277664
Downloading now...According to pof(moderator) it's a "new rom from the still unreleased Cingular 8525: HTC Hermes (HERM100) branded from U.S. Operator Cingular"
My only question then would be that this appears to be made for WM5 and I performed the WM6 upgrade which is what got me into this mess in the first place - so will there be any conflicts or issues I should now about? I'm about to go ahead with it - if anyone is out there and thinks otherwise, please advise soonest. Thx & rgds, Ed
Click to expand...
Click to collapse
Sounds good man!! Flash it!! oem WM6 roms usually fix allot of issues.. Don't be scared everyone else is busy flashing WM6.1 roms all the time now!
Thanks for the words of support <joshkoss>! Just attempted several times to flash the Shipped ROM I found from <pof> (PDA Phone ROM Update Utility - R:31300 D:51000 U:31101 P:0) and keep getting ‘ERROR[260]: UPDATE ERROR’ message. While instead I went back again to flashing the ROM that <zocster> suggested last night (PDA Phone ROM Update Utility 3.12.3.7) and it does go through the entire 10 minute process until it shows 100% completion both on the PDA and on the PC and then tells me congratulations….etc. I even flashed it twice back-to-back as I read to do in one of the threads – but just keep getting back to the dreaded Window Mobile screen with the same message "Tap the screen to set up your Window Mobile based device."
My next question is this: Why does the PDA Phone ROM Update Utility 3.12.3.7 connect to the PDA, but the PDA Phone ROM Update Utility - R:31300 D:51000 U:31101 P:0 (which I read is the Shipped ROM that I need to get the PDA back to) gives me an error message. Obviously, there is a connection since I’m able to get a 100% completion on the other ROM??? Please kindly advise…..
Hey guys I know this is not the unlocking thread but I tried posting on the thread made by "coke" with no response. So I thought I'd do it here. So here's the story
I have a Sprint Vogue and I was really getting tired of the slow HTC WM 6.1 and all the buttons that I could not modify on the cube (which is useless cuz I dont use any of the them). So I decided to try out a new rom with 6.1 and touchflo 2D.
I went to the ppcgeeks forum to unlock the phone, followed the instructions, read and reread the posts. Finally decided to give it a go. Everything went smoothly until the last step (exitbl) of coke 2.31. It kept telling me to disable USB on activesync and then the program would just shut down! ?? And yes I did disable the USB option for the activesync before that step. I looked under the device information and realized that nothing has changed interms of the ROM. So I tried it again and again (4 times). Then I just reinstalled the HTC 6.1 rom with the 3.42.30 radio... So any ideas on why this may be happening? I promise I followed all the steps
My second question is, in your opinions, what is the most reliable, stable and fast Touch 6.1 rom? Let me know if you have an opinion.
Thanks so much in advance, any help would be appreciated.
I had what sound like the same problem yesterday.
my post is over at ppcgeeks.
"I disconnected but I did not see the phone exit bootloader mode and reset itself.
....
What should I do from here?
Reboot phone, soft reset, hard reset? - go have fun?
....
I did a couple soft resets and have been playing around with it,
I guess I upgraded right... but it was weird there at the end, instructions not the clearest to me, i guess."
mine seems to be working fine, except the weather thing.
shows
in the About section my phone reads
WM 6.1 Pro
CE OS 5.2.21041
Device Information reads
ROM version 1.05.Alltel
Radio version 3.42.30
PRL Version 30008
PRI version 2.02_011
I was kinda scared to do another hard reset b/c I had already changed a bunch of settings.
Sorry if this doesn't help you too much,
but it is nice to know I'm not the only one with this issue
.
Hmm sounds like a similar problem. But I thought it wasn't unlocked unless we saw 2.31.coke somewhere in the device information.
As far as I know, hard reset did not hurt the phone. I tried installing that unlocker 4 times then went with the original HTC rom and it still turned out just like before. It installed the rom fine
Yeah I am still concerned about how it wont go through the exitbl step...
moonwoo said:
Hey guys I know this is not the unlocking thread but I tried posting on the thread made by "coke" with no response. So I thought I'd do it here. So here's the story
I have a Sprint Vogue and I was really getting tired of the slow HTC WM 6.1 and all the buttons that I could not modify on the cube (which is useless cuz I dont use any of the them). So I decided to try out a new rom with 6.1 and touchflo 2D.
I went to the ppcgeeks forum to unlock the phone, followed the instructions, read and reread the posts. Finally decided to give it a go. Everything went smoothly until the last step (exitbl) of coke 2.31. It kept telling me to disable USB on activesync and then the program would just shut down! ?? And yes I did disable the USB option for the activesync before that step. I looked under the device information and realized that nothing has changed interms of the ROM. So I tried it again and again (4 times). Then I just reinstalled the HTC 6.1 rom with the 3.42.30 radio... So any ideas on why this may be happening? I promise I followed all the steps
My second question is, in your opinions, what is the most reliable, stable and fast Touch 6.1 rom? Let me know if you have an opinion.
Thanks so much in advance, any help would be appreciated.
Click to expand...
Click to collapse
Yeah, the directions can be a bit confusing over there on that thread
Basically here are the steps
Download the 2.31 unlocker
Download the ROM you want to use (my personal preference is this one for a TF2D style or this one for a WinMO 6.5 style interface that has TF2D included to switch back and for - both very stable, fast and clean and the thread is very active for help (especially if your on Verizon or Bell which can have issues)
from there, use WinRAR to extract each file into separate folders
then Put your phone in bootloader mode (press and hold power+camera+stylus in reset until 3-color screen comes up)
At this point at the bottom of the screen it will say Serial, plug it into the USB cable or cradle and it should change to USB
Start the exe in the 2.31 and follow the directions (you may get some errors about sleep4.exe just click on OK as it keeps occuring its a XP/Windows7 64 bit issue if that is what your using)
At the point where it tell you to disconect, unplug the phone from the USB cable and wait (count to 10 or something) then plug it back in, it should have went from USB to SERIAL and now back to USB at that point go ahead and hit any key on your PC and it should continue along
once complete, reboot, allow it to do its thing then reboot and go back into bootloader again during reboot you should see coke 2.31 in the upper left if so your ready to go
plug it into your USB/Cradle again and then go into the ROM folder you extracted the ROM into
Once the screen on your phone says USB again go to the folder and double click on the RomUpdateUtility.exe file and follow the directions again, it may take some time so be paitent
once the phone flashes and reboots, let it run and do its thing to the and reboot itself then (and here is an important step for stability) once it starts up do a hard reset (red+green+stylus in reset hole) hit the enter button (center of D-Pad) it will reflash the phone and then red key (send) when prompted
then go thought the setup again, this time you can actually set things up as your keeping them this time and once things are done and your at the start screen on your phone power off (not reset) the phone and then start it up again - seems doing it this way takes care of alot of little issues that will come up before they can happen
Depending on your carrier be sure to have one of the DCD Carrier Cabs as well especially for the 6.5 ROM as it is a generic ROM and some have reported needing to run the DCD Carrier Cab for the service they use to get on the internet and use GPS and the like
Hope that clears up things a bit LOL
Detroit Doug
Doug, when I go into the bootloader it DOES say SPL-2.31.Coke. Does that mean that it is all set? Also this time, it still asked me to disable active sync at this time (at the exitbl step) do you have to run that step to complete the unlock?
This is what my bootloader image says
VOGU100 NFG
SPL-2.31.CoKe
CPLD-3
Let me know if I need to run the exitbl or if I am set to load the rom. Thanks so much for your help!
moonwoo said:
Doug, when I go into the bootloader it DOES say SPL-2.31.Coke. Does that mean that it is all set? Also this time, it still asked me to disable active sync at this time (at the exitbl step) do you have to run that step to complete the unlock?
This is what my bootloader image says
VOGU100 NFG
SPL-2.31.CoKe
CPLD-3
Let me know if I need to run the exitbl or if I am set to load the rom. Thanks so much for your help!
Click to expand...
Click to collapse
Your all set to flash if in bootloader it says as your phone does SPL-2.31.CoKe
you all unlocked and ready to go ... just put your phone in bootloader mode then connect the phone to your PC "serial" will change to "USB" and then run the RomUpdateUtility.exe file and follow along with the bouncing ball, do the watusi, wipe hands on pants - whatever helps you pass the time
but follow the steps as outlined above with the hard-resets and power-offs and the like, believe me its better to solve the issues before they occur than wait and have to start over
Detroit Doug
Doug, it worked like a charm. I did not know that the last step of the unlocker was not required. I installed 6.1 with Touchflo 2D. Looks and feels .. wow. it's the coolest thing I've seen. I've followed all your step including a hard reset before I started using it. So far the speed is impressive.
Couple more questions for you since you are an expert at this.
1. If I reload the factory default ROM, will it reset everything back to normal and can I keep reverting back and forth between different ROMs without any consequences?
2. It (the NFSFAN's 6.1 rom) seems to use less Storage memory (137 free vs HTC's ~100 free) but much more Program memory (59 free vs. ~80 in HTC's) than the HTC default. Any ideas or concerns about this?
All in all thanks so much! Hopefully as I learn more and more I will be able to contribute things too. You are right. This is so cool and highly addictive!!
Take care~ BTW I am in Lansing Go State!
moonwoo said:
Doug, it worked like a charm. I did not know that the last step of the unlocker was not required. I installed 6.1 with Touchflo 2D. Looks and feels .. wow. it's the coolest thing I've seen. I've followed all your step including a hard reset before I started using it. So far the speed is impressive.
Couple more questions for you since you are an expert at this.
1. If I reload the factory default ROM, will it reset everything back to normal and can I keep reverting back and forth between different ROMs without any consequences?
2. It (the NFSFAN's 6.1 rom) seems to use less Storage memory (137 free vs HTC's ~100 free) but much more Program memory (59 free vs. ~80 in HTC's) than the HTC default. Any ideas or concerns about this?
All in all thanks so much! Hopefully as I learn more and more I will be able to contribute things too. You are right. This is so cool and highly addictive!!
Take care~ BTW I am in Lansing Go State!
Click to expand...
Click to collapse
Glad it worked, and Ill try to answer you concerns
1 -Now that it is unlocked go ahead and swap ROMs all you want to, the tricky part is the stock ROM, flashing back to stock can and will revert your radio (if youve upgraded it) and ca cause issues with the unlocker, but a simple run of the unlocker 2.31 again can correct it
2 - NFSFAN like other Chefs have ways of moving data/programs around when they cook up these ROMs utilizing whatever kitchen program they personally prefer that being the case how they data/programs get pushed about can create the speediness you now see in your phone by freeing up the RAM for apps and the like and pushing programs off to the side optimizing how the device should have been setup from the start
As for that, Ive been using his ROMs as well as some others for quite some time and have had little to no issues with how he places the progs and data so I wouldnt worry about it
Yeah, Live in Las Vegas now - but Michigan will ALWAYS be home Go Red Wings !!!!
Detroit Doug
Thanks Doug, for all your information. Your answers were great! Hopefully I wont need too much more help in the future. i'm learning~
Don't mean to go off on a little tangent, but I find this post really helpful and was wondering if you, Doug, or someone else could provide a link to this 2.31 unlocker or whatever it is. Thanks in advance.
hibbiejibbie3 said:
Don't mean to go off on a little tangent, but I find this post really helpful and was wondering if you, Doug, or someone else could provide a link to this 2.31 unlocker or whatever it is. Thanks in advance.
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/showthread.php?t=20370
Detroit Doug
Having trouble unlocking my xv6900. I'm using 2.31 unlocker. I have the phone in bootloader mode and when I connect the usb it goes from serial to usb. I run the RUU from the unlockers self extracted folder but it get an error message. I'm pretty positive its just something im not doing correctly. Any help appreciated.
Another thing I noticed the RUU will not detect my current version if I am in bootloder mode. If I run the RUU with active sync on it will detect my current version but when it puts my phone into bootloader mode to update it, it disconnects my active sync connection.
Reddog80p said:
Having trouble unlocking my xv6900. I'm using 2.31 unlocker. I have the phone in bootloader mode and when I connect the usb it goes from serial to usb. I run the RUU from the unlockers self extracted folder but it get an error message. I'm pretty positive its just something im not doing correctly. Any help appreciated.
Another thing I noticed the RUU will not detect my current version if I am in bootloder mode. If I run the RUU with active sync on it will detect my current version but when it puts my phone into bootloader mode to update it, it disconnects my active sync connection.
Click to expand...
Click to collapse
Check your PM over at PPCGeeks
Detroit Doug
Reddog80p said:
Having trouble unlocking my xv6900. I'm using 2.31 unlocker. I have the phone in bootloader mode and when I connect the usb it goes from serial to usb. I run the RUU from the unlockers self extracted folder but it get an error message. I'm pretty positive its just something im not doing correctly. Any help appreciated.
Another thing I noticed the RUU will not detect my current version if I am in bootloder mode. If I run the RUU with active sync on it will detect my current version but when it puts my phone into bootloader mode to update it, it disconnects my active sync connection.
Click to expand...
Click to collapse
From Detroit_Doug
At the point where it tell you to disconnect, unplug the phone from the USB cable and wait (count to 10 or something) then plug it back in, it should have went from USB to SERIAL and now back to USB at that point go ahead and hit any key on your PC and it should continue along
Maybe wait longer if you can,
I reckon some pc take longer to fully recognize[process] the disconnect and reconnect procedure.
example: disconnect > wait 20-30 seconds > reconnect > wait 20-30 seconds > then continue
I had that same issue and waiting longer during this process helped
.
I can't even get to that point. With active sync on as soon as I start the unlocker RUU it gets the info from my phone and shows the current rom 3.14.605.1 ....I click update and it shows 2.31 unlocker I hit next and then the install status bar comes up on my desktop and my phone goes into bootloader mode and the active sync connection drops and I get the 262 connection error. If I start the RUU with my phone in bootloader usb mode already it does not detect my current rom and I click next. click next to 2.31 unlocker, and it goes through the same steps and I get the same error. Is there anything I have to do to my phone prior to running the RUU. My phone is a verizon xv6900 running wm 6.1 rom 3.14.605.1 with radio 3.37.78
I have the same problem with my new sprint touch. I get error 262 at 0%, did they change something in these new phone that won't allow us to unlock?
Rom is 3.03.651.4
radio 3.42.30
I think I got it, what I did was not to extract the vogue_unlocker_MFG_2.31.exe file but to run it. I had activesync set up and connected, then just ran the unlocker, don't extract it. It will shut off activesnyc and put my phone in to the 3 color screen, form there, just follow the directions. Also I didn't have to run the exitbl step as my phone auttomatically exit and restarted.
I ended up having to re-run the .041 unlocker and then the 2.31 unlocker and it ended up working for me. I'm not sure why I had to because I Had the same bootloader info prior to running the 2.31 unlocker in the first place. The 6.5 rom and gps rom has been working flawlessly for a week now, the only thing I had to do was call up VZW (*8889) the guy answered "account investigations" LOL I told him I had to hard reset and my phone wouldn't authenticate and he asked me to call back from another line. I told him that I had no landline and he said thats fine I can override it just call back right away whenever you get to another phone. That was on friday and I have not called back but I've been able to text, make and receive calls so I don't think I will unless I have to.
gooney said:
I think I got it, what I did was not to extract the vogue_unlocker_MFG_2.31.exe file but to run it. I had activesync set up and connected, then just ran the unlocker, don't extract it. It will shut off activesnyc and put my phone in to the 3 color screen, form there, just follow the directions. Also I didn't have to run the exitbl step as my phone auttomatically exit and restarted.
Click to expand...
Click to collapse
thank you! i did that and it worked for me.
yeah, it says right in the directions over there to just run the exe it will create a temp folder and run the RUU itself from there
Extracting it and running it will always cause issues
also - Ignore the sleep4.exe or whatever if you encounter it - it is a legacy exe that is called that isnt used anymore, wont affect the unlocking just hit OK through it
Detroit Doug
I put the applock on, i reboot, i double click the exe to run the dos thing, i allow my fone to run spl something, i click centre button, it says run the ruu ex, I do, and active sync disconnects before I can do anything else...Error 260...i can wait an hr an nothing happens. I've soft-reset, hard-reset, followed and understood and read every instruction but I just cannot get it to upgrade. The phones unlocked, the apps are unlocked. I've tried it without redoing the applock exe. I'm stuck. Any advice before I call it a day and keep my greedy wanting nature under control. All help much appreciated.
Bimbledwadle said:
I put the applock on, i reboot, i double click the exe to run the dos thing, i allow my fone to run spl something, i click centre button, it says run the ruu ex, I do, and active sync disconnects before I can do anything else...Error 260...i can wait an hr an nothing happens. I've soft-reset, hard-reset, followed and understood and read every instruction but I just cannot get it to upgrade. The phones unlocked, the apps are unlocked. I've tried it without redoing the applock exe. I'm stuck. Any advice before I call it a day and keep my greedy wanting nature under control. All help much appreciated.
Click to expand...
Click to collapse
I will recommend you to grab a cup of coffee or tea and read here: http://forum.xda-developers.com/showthread.php?t=537151 you definitely solve this problem if you follow the step by step guides.
gmaniac2008 ....cup of decaf tea, an i'll be back
Bimbledwadle said:
gmaniac2008 ....cup of decaf tea, an i'll be back
Click to expand...
Click to collapse
.....let us know if you still have some problems after you read the STICKY, I'll be glad to help you
I tried with two of them but I cannot stop my activesync just disconnecting right when it tells me its going to start the update, then I get the error 260...you are not connected. then no matter how long I leave it it doesn't start. ive followed all the instructions to every detail. Im now completely bog-eyed n I cant concentrate anymore, so im leavin it till the morrow. THankx very...ill be back
active-sync problem
well, ive followed every single instance from all the options available and everything goes fine until it gets to the actual updating point and then active-sync cuts off,10 seconds later i get error 260 saying im not connected. Ive left it all alone to see if it will update as the usb cable is still attached but no. I havent had this problem with any other phone update or unlock or debranding. Ive noticed on google that others have the same problem and they were told to leave it running and it will continue to update but on all the options ive left it overnight and it hasnt updated and neither has theirs. All help stops after everyone else has done what ive done, its too near xmas to drown my sorrows but, thanks for help n have a lovely xmas n new year
When you press the center button and the screen turns white do you hear the chime windows make when a USB device is disconnected?
Bimbledwadle said:
well, ive followed every single instance from all the options available and everything goes fine until it gets to the actual updating point and then active-sync cuts off,10 seconds later i get error 260 saying im not connected. Ive left it all alone to see if it will update as the usb cable is still attached but no. I havent had this problem with any other phone update or unlock or debranding. Ive noticed on google that others have the same problem and they were told to leave it running and it will continue to update but on all the options ive left it overnight and it hasnt updated and neither has theirs. All help stops after everyone else has done what ive done, its too near xmas to drown my sorrows but, thanks for help n have a lovely xmas n new year
Click to expand...
Click to collapse
Well, actually when you flash your activesync shut offs but your USB connection stills active, so that's normal.
Did you sda unlock your phone before you flashed?. You should do this every time you flash (well that's why I do), also make sure you remove your sd card; because these can cause error messages while you flash.
Other option can be try another PC or reinstall activesync, sometimes my laptop gets crazy and I get multiple errors when I flash, but when I use my desktop flashing goes smooth
yes I sda unlocked every time....i only have a lappy....i remove my sd card...i will uninstall n reinstall active sync.....I'll check out if any of my daughters' friends have desktops to see if I can do it that way. I shall try all that over xmas n new year n ill let you know how I get on. Many Thanx....
Bimbledwadle said:
yes I sda unlocked every time....i only have a lappy....i remove my sd card...i will uninstall n reinstall active sync.....I'll check out if any of my daughters' friends have desktops to see if I can do it that way. I shall try all that over xmas n new year n ill let you know how I get on. Many Thanx....
Click to expand...
Click to collapse
Ok, I forgot to mention; if you have another USB cable try it also.
Hope that helps ..Merry Christmas and happy new year
im running Windows Mobile Device Center 6.1 for vista as it says active-synce 4.2/4.5 only works with xp. Could this be a problem ? Is this why I'm havin trouble with flashing the roms or am I red-herring myself ?
Bimbledwadle said:
im running Windows Mobile Device Center 6.1 for vista as it says active-synce 4.2/4.5 only works with xp. Could this be a problem ? Is this why I'm havin trouble with flashing the roms or am I red-herring myself ?
Click to expand...
Click to collapse
is there no update on this situation? because i am currently attempting to flash a rom for my friends dash and i am having the same connection error problems. and she has a windows vista laptop. i am not sure if that is what the problem is. convinced its not the cord. during the update process it just disconnects once it gets to about 3 percent.
cediesaid said:
is there no update on this situation? because i am currently attempting to flash a rom for my friends dash and i am having the same connection error problems. and she has a windows vista laptop. i am not sure if that is what the problem is. convinced its not the cord. during the update process it just disconnects once it gets to about 3 percent.
Click to expand...
Click to collapse
3% error solution. Also, make sure you access your PC as an administrator and disable any firewall