Develop Bugs

HELP MMS Configuration under WM5

Hi All
I've been reading all over the forums and searching for a configuration manual or something but I can't find anything! Please help me configure me device!
here are the settings but I don't know where to put them:
MMS Vivatel
Home Page------- mmsc. vivatel.bg
APN--------------- mms. vivatel.bg
IP----------------- 192.168.123.123
Port (WAP 1.X)--- 9201
Port (WAP 2.0)--- 8080
Username-------- "mms"
Password--------- "mms"

go to your outlook inbox
at the bottom of your screen on the right: tap on menu
than you get a popup screen where the bottomchoice should say "MMS Configuration"
tap on that, than you get three tabs. Choose for the "Servers" tab, add a new server and make it your default server.
that should do it.

i checked out my outlook inbox but it has no options for mms configuration... i lost all my mms after i upgrade to wm5 and now i dont know if i can still recieve them coz i have no mms inbox/outbox... can any body help pls?

Look in the BlueAngel Upgrading forum for tuma 1.3 upgrade. On that thread there's a lot of post on how to resolve this. What I used was:
To configure up your MMS Account do the following 13 step process:
1). Check that you have "MMS Configuration ..." available in your Outlook Menu. If you don't then something has seriously gone wrong. Did you install the "ArcsoftMMS-TuMa.cab" file through the EXTROM or manually? If not - do so now. MMS is NOT available in the Base ROM.
2). Click it, and just ensure that it comes up and is active. The about should say "MMS Composer Version 3.0.7.11"
3). Click [ok] and close it.
4). Menu -> Tools -> New Account
5). Enter "[email protected]" as your email (doesn't matter what). Click Next.
6). Detect settings ... wait ... Click Next.
7). Enter a username "mms" will do. Click Next.
. Select "MMS" as the Account Type. Click Next.
9). Incoming Server = "mms", Outgoing Server = "mms". Click Finish.
10). Finally ... click "NO" to not download mail for this account.
11). Now go back to Menu -> "MMS Configuration ..." -> Servers
12). Edit and modify the "Sample Server" to your required settings ... (which I can't help you with)
13). Presto ... you now have an MMS account.

10x

ok..but now my concern is..do i need the tuma romv1.3 installed before i can install arcsoftmms.cab? or can i just have this cab separately installed?
thnx again!

i don't know if you can install it seperatly, maybe you can ask this in the tuma 1.3 thread

How to create a cab for operator settings?

As I'm testing the different WM6 Roms I have to enter all the settings again and again and again. Now I'm thinking about creating a cab file with the operator and email account settings. But how to create it?

gerald_s said:
As I'm testing the different WM6 Roms I have to enter all the settings again and again and again. Now I'm thinking about creating a cab file with the operator and email account settings. But how to create it?
Click to expand...
Click to collapse
...look at this theme...
http://forum.xda-developers.com/showthread.php?t=299023
Regards,
Primoz

someone didnt take the time to search or RTFW

I saw the thread but not the cab file, sorry guys.

I would also like to know this...
CWW Enterprises Operator PDA Manager is great don't get me wrong, but by the time you install the software, download the operator lists etc, I can manually enter my own settings! and as I'm only interested in one network settings and one country, it would be far quicker & easier to have a cab file for the settings!
So, how can I create my own cab file?

so let me spoon feed you guys....
http://forum.xda-developers.com/showthread.php?t=299393
and when your done making your working cab add it to the wiki if its not already here
http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs

I basic newb question about wm6 rom upgrading

if I upgrade to Karmba_a_6.2_EN-18548, do I lose all my phones network settings?
Or will this just upgrade the OS and leave the orange network settings, and installed programs intact?
Sorry if this is a basic newbie question.
I have he original Orange rom that was kindly listed for backing out if needed, and I understand that my warrenty will be invalid if I brick it and can't back it out.
I love the look of the touchflo cube stuff and how much cooler the WM6 interface looks, and the reports of better performance under WM6, and apparently how Orange won't officially make an upgrade rom.
I just want to outdo my bosses new iPhone

skraggy_uk said:
if I upgrade to Karmba_a_6.2_EN-18548, do I lose all my phones network settings?
Or will this just upgrade the OS and leave the orange network settings, and installed programs intact?
Sorry if this is a basic newbie question.
I have he original Orange rom that was kindly listed for backing out if needed, and I understand that my warrenty will be invalid if I brick it and can't back it out.
I love the look of the touchflo cube stuff and how much cooler the WM6 interface looks, and the reports of better performance under WM6, and apparently how Orange won't officially make an upgrade rom.
I just want to outdo my bosses new iPhone
Click to expand...
Click to collapse
Yes it's a newbie question
If you flash any ROM you will loose EVERITHING
If you flash you will loose warranty
But you always can "downgrade" and get warranty again

trinityguides....

Thanks. I knew it had to be asked before.
Just finding where to start was the tricky part.
So much useful stuff from so many knowledgeable people.

have fun with your new toy
iphone....we don't use that word round here

Is there a backup solution that allows the operator settings to be backed up?
I installed SettingSaviour but I'm not sure exactley what itsaves?
Does Spritebackup do that?

skraggy_uk said:
Is there a backup solution that allows the operator settings to be backed up?
I installed SettingSaviour but I'm not sure exactley what itsaves?
Does Spritebackup do that?
Click to expand...
Click to collapse
Dont worry......Karmba has network wizard in his ROM, you can find it in start/settings/connection, so it will automatically detect your network & set everything for you......

That is even better.
Excellent news.
I guess I shall give it a go tonight.

The Auto detect network settings option found in WM6 Roms is "all well and good" but it does miss certain Orange UK customised settings so I would advise that you install this Orange UK Settings CAB v1.6. by rabdo . The file configures default orange custom settings to name but a few.
Description: -Installs Internet and MMS settings for Orange UK
-changes UMTS prefix to 3G when on 3G networks
-fixes voicemail icon
-fixes user agent ID (for orangeworld)
-changes regional settings to UK
-Black-IV-Shadow compliant!!! (contains sdkcerts)
-Adds Pocket IE shortcut to orangeworld

I shall add that to the list of things to add.
I've already backed up with SettingSaviour.
So I guess it is
Unlock
Flash
add the cab for the orange custom operator settings
re-install tomtom
restore the backup I have of data and settings.

I have installed Karmba into my D810, but the new rom unable to retrieve contact from my SIM. Now i force to copy all the Sim contacts to phones inorder to use it.
Any idea how to fix this ?

Show SIM contacts!
cason said:
I have installed Karmba into my D810, but the new rom unable to retrieve contact from my SIM. Now i force to copy all the Sim contacts to phones inorder to use it.
Any idea how to fix this ?
Click to expand...
Click to collapse
Edit your registry to change the ShowSim key in HKCU\ControlPanel\Phone to value: 1 (dword) for showing SIM contacts.
You can turn it off by changing the key to 0 (dword).

Well, it is flashed and running and my settings are back.
I had to reflash the radio rom back to a higher one, to get GPS back, but SettingSaviour/Pimbackup and the Orange settings cab did the job.
Still need to work out why Touchflo isn't so sensitive, but minor things.

tnyynt said:
Edit your registry to change the ShowSim key in HKCU\ControlPanel\Phone to value: 1 (dword) for showing SIM contacts.
You can turn it off by changing the key to 0 (dword).
Click to expand...
Click to collapse
Thanks for your useful information. But I already copied my SIM contacts to phone, now if i ShowSim the contacts will be duplicated.
Any way i can del all my phone contact ?
I unable to see "select all" in phone contact option.
Thanks again.

Need help with operator settings cab

Please, can anyone help me create operator settings cab for T-Mobile HR network ?
All this time I had to manually create all my settings after flashing ROMs and it is a pain in the arse
I have extracted provmxl files with all the settings from the T-Mobile HR WM6 ROM, now I just need help with creating a cab file with it..
What files do I need for the cab and how do I initiate creation of the settings from provmxl files after installation ?
If anyone can tell me step by step how to create a cab or create a cab for me if it is easier then explaining, I have attacked the provmxls that needs to be edited a bit...
Thanks in advance!

Check Schaps. He has a cab listed that is a connections wizard that will detect and set up your phone...It works for AT&T so I would think it would for you....Look at his rom post and you should find it...

I know there is a connection wizard, but there are no Croatian networks present, so it will not work for me
The only way for me is to create provmxl file with all the settings that can be then used with network connection wizard. The provmxl files are here, they just need to be edited a bit since there is some crap in there that has nothing to do with operator settings..
I would like if someone could help me create cab file with settings for just my network since I don`t want/need other network settings and they will just use my storage space for no reason..

Hey Shamanix, i see what you're trying to do and sorry i can't help. But would it not be more beneficial for you (and everyone) to send these settings over to Schap and have him integrate them INTO the connection wizard? This way they are there for future users in one easy spot.

mms on 6.1

im using a variant of windown mobile 6.1 that doesnt seem to have mms with the text messages option, is there a cab file that i can use to install mms

Device Update
U need Arcsoft MMS
i've uploaded the device update.
install the cab file and download the software u need..
u shud get a hold of HTC connection wizard which automatically configures your connection.. great application
and download arcsoftmms too.
but u have to configure the mms options in the messaging menu and choose the server.
the connection wizard might configured the server for you. or you have to create a new one manually according to your telco.

thank you!

no problem buddy.
just come back to update your status

im back lol, arcsoft mms is totally configured, but i only see an mms sending option, how exactly do i receive mmses?

go to your message box click on the menu and into MMS options.
go to the servers tab.
you should see your operator server there if u had the HTC connection wizard ran.
just set the settings to default.
if the settings isnt there, u'll have to configure the settings manually. try search for the operator settings on google by typing "operator name" mms server settings.
that shud help

Am I doing something wrong or is this Arcsoft MMS removed from the Device Update Database?
Where should we get it now?

is it? it should be there.
did u installl arcsoft mms in your device already? maybe u could try searching for the cab files.

is it? it should be there.
did u installl arcsoft mms in your device already? maybe u could try searching for the cab files.

I am sorry for my very late response. I still can't find the program in Device Update. I've tried to search for a .cab but this is like warez because normally it is baked into the ROM, I have a lite ROM now without MMS app. I don't think this is why MMS app is not listed because I have had a ROM before without MMS (at least I think), then MMS was listed in DU.
Kind of confusion to me.

I just checked and it is listed under system.

Getting more strange now:
Device Update:
Error loading catalog.
Check Internet Connectivity and try again
Nothing changed and wifi is working for all other progs.

So dont use it! if it dont works, is not the only way to get it... Btw the topic is mms on 6.1 no CRCDU issues.
Come on boys
use the search option upper right corner from XDA bar....
ARCSOFT MMS COMPOSSER...

Yes totally offtopic, I am sorry for that. The problem was client side by the way. I did a hardreset and internet is working correctly now. But...more strange: all of a sudden ArcSoft MMS Composer 4.2.8.1 is installed...must be something wrong with the original install...
Well...my case fixed. Other persons will manage with the search tags + Que PPC gave haha.