Hello guys, i have a little problem with my diamond.
When i'm trying to install the V 1.93 rom, the set up procedure stucks at 0%. What am i supposed to do?
is it a official ROM?
if its a cooked ROM, or a ROM not for your carrier, then you have to Flash Hard SPL first!
Yes, it's an official Rom.. How can i flash spl?
See the first few posts on top: http://forum.xda-developers.com/forumdisplay.php?f=430
i'm back again but i didn't try anything to my diamond because i was so busy those days. Is it any Thread that i can find a solution without brick my precious diamond?
Related
Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke
y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky
OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!
This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950
harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)
he is asking for unsigned one also (i nv see wrong @ his post)
read again.. he already has 1.40 olinex (which is unsigned)
Hi everybody. I as probally most of u have a Diamond. I've been reading freaqently about Hardspl roms and such since it seems to make your diamond alot faster and better I would like to update/change my rom. As I understand HardSPL is usefull in the way that you can't brick your phone with rom flashing once you have HardSPL flashed. Am I right?
Then there is the choice of hardSPL. I've been looking at OliNex's unsigned 1.40 and OliNex signed 1.38. It seems signed is safer but Unsigned is more open, since you can flash any rom at all. I'm not real sure which one to get since I don't really know what rom seems most suitable for me.
I'm looking for a fast rom, ofcourse, most preferbly a swedish rom but I can survive with english as long as it's possible to get swedish (full and compact) QWERTY. Any suggestions on what rom I should use?
Then Radio I have kind of no idea what that is, can someone explain that real quick?
I guess i'm not the first of making this kindof thread, but please help a guy out. Thanks alot for all hard work so many of you put in to make the diamond more usefull!
Also it would be nice to be able to restore the diamond back to it's original spl and rom for warranty reasons. I have the vers and all written up. I've been looking at swifts rom, and duttys. Are those to recommend and what kind of HardSPL would I have to use to get either of them?
ballex said:
Also it would be nice to be able to restore the diamond back to it's original spl and rom for warranty reasons. I have the vers and all written up. I've been looking at swifts rom, and duttys. Are those to recommend and what kind of HardSPL would I have to use to get either of them?
Click to expand...
Click to collapse
Read here:http://www.modmydiamond.info/
Hello All,
I am in a fix right now . I ordered HTC Diamond from Rogers and got a french phone instead. I really cant do anything with that. Now I called rogers and they say they dont have touch english in stock anymore and dont expect it soon too. I have two choices only, flash with WWE ROM or return it back. I really dont wanna return it back but I am kinda new to all SPL thing. I want to flash it. I have experience in flashing my HTC Excalibur 3-4 times.
I just have two questions to ask and if you can answer them I will get to keep the phone or else I would have to send it back.
1. My current SPL version is 1.93 . So before flashing to a new rom which SPL should I flash it to. There are tons floating around. Can u pin point to me please.
2. Will any ROM work with the SPL?
I will really appreciate your help .
Thank you
UPDATE: I just found out there is a ROGERS WWE ROM on xda. Do I need to HARD SPL it or I can just change the ROM?
Yup, you'll still need to put the HardSPL on to allow you to change the device, as your changing it's region as far as the device knows.
Use this one:
http://forum.xda-developers.com/attachment.php?attachmentid=101134&d=1216793074
It's Olinex's HardSPL for 1.93 (same one I used), works perfect.
Just make sure you follow the instructions on the flasher.
Thanks for your quick reply Phoenix..
I appreciate this...
Once SPL is done I can flash with any ROM right?
Thanks again...
Yup, no problem and lots of choice lol
hi guyz hope that everyone is fine. i need a bit of favour from u all.. i got my htc from sweden and then upgraded the rom from htc site and got sweedish language all over.. no i am looking for the latest wm 6.1 WEE rom.... i have tried the roms in the offical roms thread but after installation it says its corrupt thanks to hard spl i didnt brick my device....thanks anyway...
umar1990 said:
hi guyz hope that everyone is fine. i need a bit of favour from u all.. i got my htc from sweden and then upgraded the rom from htc site and got sweedish language all over.. no i am looking for the latest wm 6.1 WEE rom.... i have tried the roms in the offical roms thread but after installation it says its corrupt thanks to hard spl i didnt brick my device....thanks anyway...
Click to expand...
Click to collapse
Hi,
Try: http://forum.xda-developers.com/search.php I'm sure it will help!
umar1990 said:
hi guyz hope that everyone is fine. i need a bit of favour from u all.. i got my htc from sweden and then upgraded the rom from htc site and got sweedish language all over.. no i am looking for the latest wm 6.1 WEE rom.... i have tried the roms in the offical roms thread but after installation it says its corrupt thanks to hard spl i didnt brick my device....thanks anyway...
Click to expand...
Click to collapse
Let s try this Rom http://forum.xda-developers.com/showthread.php?t=411707
Its very very stable and saving battery.
Will have one for you in about an hour mate, if my WiFi doesn't cut out again!
Ok, here's:
_HTC Touch Diamond_MRII_RUU_Diamond_HTC_Europe_2.03.401.3_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
It's the latest HTC stock rom. It's in WWE Language, downloaded from HTC website, and I've edited the .nbh file with NBHUtil so it will flash to your device. Also, only the OS is included in this .nbh, so it won't change your radio version, SPL or Splash screen. I recommend flashing from Internal Storage. It's the fastest and safest way. If you're unsure how, search the forum. You'll find a guide on how to do this. And remember to hard reset when it says Update Successful!
http://rapidshare.com/files/281594364/DIAMIMG.rar
Thanks people...
To Day I Hardspl And Flash New Rom For Touch Pro2 (Modify) That I Found In This Forum And I Notice After I Flash That Rom Build For Tilt2 (The Phone Signal Not Stable A Problem With Ram And Weird Problem About Hardware Keyboard ).
After I Use It And I Decide To Change To Another Modify Rom. I Found That I Can't Flash Rom. And Spl Change To New (Not Olinex).
I Try To Flash Olinex Again And Notworking (Device Not Responding Error In Flash Process)
I Try To Flash Stock Spl. And That No Luck It's Same Problem
I Worry About My Phone Are Not Able To Flash Again (I Have Bricked Nokia E90 And Feel Sad Before) And I Prepare To Sent To Htc Service But I Found The Way To Flash By Accident
To Make Phone Flash Able
1. I Have Flash New Windows Mobile For Touch Pro2 (S2) From Htc Website That Have The Same Spl. After That I Feel Happy That I Can Flash Official Rom And Hardreset After That.
2. I Downgrade By Flash Official Windows Mobile From Htc Spl 0.87 And Hardreset After That
3. I Can Flash Olinex Spl And Happy To Flash ModifyRom Again.
Sorry For My Bad English. And Anyone Who Have Easier way To Solve This Problem Please Guide
Hope This Information Useful To Anotheruser
Thanks For Information In Xda-Dev And Chef To Cook New Useful Rom For Rhodium
My Device Is Rhodium Hongkong
Energy Rom Thanks NRGZ28 Best Wolverine
ThaiwinCe ,Igo8,And Thai Keyboard Work Fine Again
Thankyou
Welcome to forums
I´m not sure if understood your problem, hope I do.
I would suggest to re flash again following instructions from here:
http://forum.xda-developers.com/showthread.php?t=550540
Normally a cooked ROM should work even better/faster than any original ROM.
Hope it helped and good luck,
And don´t forget to vote!
Does the new hardspl include a overwrite protection freature? meaning that a new hardspl can't overwrite it?