Camera picture counter P3300 - P3300, MDA Compact III ROM Development

I you want to set the counter at a specific value (after a reset to continue numbering)
Open registry ((With PHM registry editor for exemple)
Go to
HKCU/software/htx/camera/4.03/Preferences
At position 0068h you 'll find the current value, change it to the value you want but don't forget value should be inserted in Hexa
Regards

Related

Soft Key icon missing on XDA Orbit???

Hi guys,
having had various WM5 handsets, I was a little upset to not be able to adjust the soft keys located at the bottom of the today screen. This has been possible on previous units just not the Orbit. The icon is found on the settings/ personal screen under the icon soft keys. I have done a hard reset and the icon still has not appeared. Can anyone suggest a registry entry to enable this function as the pre set options are not required????
I have seen 5 Orbits and all seem to be without it is this different on the artemis or T-mobile Compact III's?
Just to add I was wondering if I would ber able to dopy the icon from my previous device and see if it would work in my XDA Orbit?
Its the softkey applet you are after - place this cpl in the \windows directory soft reset and it should appear. (soft reset not strictly necessary)
Users beware - it is not easily reversible after install - you can delete the cpl but the settings remain the same and you will need to do a registry edit to get back tp previous state.
JC#79:
The Artemis has no Softkey applet, too.
Thanks at meschle
Thanks for that is any issues I should be aware of with using this applet, as in any problems etc?
Also how would I go about removing it from the registy should I indeed choose to do so (problems permitting)?
JC#79 said:
Thanks for that is any issues I should be aware of with using this applet, as in any problems etc?
Also how would I go about removing it from the registy should I indeed choose to do so (problems permitting)?
Click to expand...
Click to collapse
No issues in actually using it but after removal will have to restore orig reg keys
taken from wiki - good place to vist
Change the application launched by Today screen Soft Keys
To change the application launched by the Today screen Left soft key:
HKCU\Software\Microsoft\Today\Keys\112\Open = "\Windows\Calendar.exe" (REG_SZ string, including quotes)
To change the title of the Left soft key:
HKCU\Software\Microsoft\Today\Keys\112\(Default) = "Calendar" (REG_SZ string, no quotes)
To change the application launched by the Today screen Right soft key:
HKCU\Software\Microsoft\Today\Keys\113\Open = "\Windows\Start Menu\Programs\Contacts.lnk" (REG_SZ string, including quotes)
To change the title of the Right soft key:
HKCU\Software\Microsoft\Today\Keys\113\(Default) = "Contacts" (REG_SZ string, no quotes)
Note that 113 normally doesn't exist by default, and probably needs to be created
Also note that there is at least 1 application that allows you to set these through a GUI, developed by FdcSoft called SoftKeyAppletEx.'
For some reason after removal of the applet the defaults dont return - so need editing
Thanks for that I'll give it a try later tonight after I backup the device just to be sure I can restore without any issues.
Also when you say wiki what do you mean have you a link?
Also will the applet allow me to use the softkey function as in previous handsets via softkey icon in personal tab of settings menu (am being blond has been along day)?
JC#79 said:
Thanks for that I'll give it a try later tonight after I backup the device just to be sure I can restore without any issues.
Also when you say wiki what do you mean have you a link?
Click to expand...
Click to collapse
Lol - the link is at the top of the screen on the left and the first post of the forum!
works perfectly on my german hero running dopod p800w wwe - rom!
thanx
Works a charm and the phone is just as I want it for now!
Ok slight problem with this the applet works for certain items but not with the new MMS and new SMS can anyone offer any advice as the handset states I should attempt to reinstall application?
JC#79 said:
Ok slight problem with this the applet works for certain items but not with the new MMS and new SMS can anyone offer any advice as the handset states I should attempt to reinstall application?
Click to expand...
Click to collapse
How have you tried to set it up? Which shortcut did you use?
I installed the file in the windows dir as advised.
I did a soft reset and attempted to use the New SMS & New MMS shortcuts.
When I try it comes up with the error message:
tnsms.exe
The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
This also comes up for the file name 'tnmms' am not really sure what to do next, seems all other ones work that I have tried so far?
JC#79 said:
I installed the file in the windows dir as advised.
I did a soft reset and attempted to use the New SMS & New MMS shortcuts.
When I try it comes up with the error message:
tnsms.exe
The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
This also comes up for the file name 'tnmms' am not really sure what to do next, seems all other ones work that I have tried so far?
Click to expand...
Click to collapse
I dont seem to have those shortcuts - what device are you running?
If you can, attach copies of those lnk files in a zip.
I use wm5newmenu and it already has those shortcuts in its menu - i assigned the menu to left soft key.
I have the o2 XDA Orbit those shortcuts are a part of the messaging programme for starting new sms and mms. I will search the device and see if I can find the files and zip them up on here.
Correction I cannot find the files stated in the error message, so I am at a loss as to what to do next?
Bump
Anyone shed any light on this one? I can enable these shortcuts on my old MDA Compact yet with the applet on the Orbit it is having none of it.
Same here with my Orbit ... I wanted to use left soft key for new SMS, but it gives me an error: The file 'tnsms' cannot be opened. ...Any advice guys?
Cheers ..
meschle said:
No issues in actually using it but after removal will have to restore orig reg keys
taken from wiki - good place to vist
Change the application launched by Today screen Soft Keys
To change the application launched by the Today screen Left soft key:
HKCU\Software\Microsoft\Today\Keys\112\Open = "\Windows\Calendar.exe" (REG_SZ string, including quotes)
To change the title of the Left soft key:
HKCU\Software\Microsoft\Today\Keys\112\(Default) = "Calendar" (REG_SZ string, no quotes)
To change the application launched by the Today screen Right soft key:
HKCU\Software\Microsoft\Today\Keys\113\Open = "\Windows\Start Menu\Programs\Contacts.lnk" (REG_SZ string, including quotes)
To change the title of the Right soft key:
HKCU\Software\Microsoft\Today\Keys\113\(Default) = "Contacts" (REG_SZ string, no quotes)
Note that 113 normally doesn't exist by default, and probably needs to be created
Also note that there is at least 1 application that allows you to set these through a GUI, developed by FdcSoft called SoftKeyAppletEx.'
For some reason after removal of the applet the defaults dont return - so need editing
Click to expand...
Click to collapse
Meschle - thank you for the intro to registry editing - good for beginners like me !
I use this:
Just to say, Happy Christmas to all,
AND
The registry setting for the soft keys is a marvel. I reckon it is better than any applet (going from what I hear), I havent tried any applet, I went straight to the registry and I must say It is exactly as promised.
My Setup:
O2 XDA Orbit, Mobile 6, Default Theme
Program to access Registry:
SOTI Pocket Controller Pro v6.01 (this is well worth the money)

problem with voip registry value

Hi all,
I have installed phm regedit and resco registry editor,
I can modify registry settings except this value (form 0 to 1)
HKLM\System\VoIP\SIP
EnablePort5060 = 0
the phm reg editor says "unable to perform this action"
resco doesnt give any message but it doesnt modify the entry
any ideas, why I cant change this entry?
I already did a hard reset, didnt help.
thanks in advance.
solved it.
I had to install the security configuration manager and change the securty setting.

Treo 750 left soft key hack

I performed the below hack:
1) Go to HKEY_CURRENT_USER\Software\Microsoft\Today\Key\112 using any Registry Editor.
2) Tap on the Default string to open it up and change the value data to eg: Message.
3) Tap on the Open string to open it up and change the value data to Messaging.exe.
4) Reset your Phone or remove the battery to finalize the change.
I want to change it back and cannot remember what it was originally.
What do I need to put where it says Messages on the default string?
What do I need to put where it say Messaging.exe on the open string?
Thanks in advance for your time.

HELP, Some body plz

I play with my registry, and my dumb to delete my registry files, the file is in
HKLM\Software\OEM\PhoneSetting\
The files is begin with "Voi....", someone plz help can give me some correct file?
I mean what "Voi........? that's it plz
∼
I'm sorry, I don't have this key : I have no VOI.....
Are you shure that is the right thing ??
What carrier? Stock ROM?
Under Verizon stock 6.5 ROM there are no keys there beginning with "V".
There is a folder called VoiceMail. It has one String Value key (Default) with an empty value.
There is a folder called VoicePrivacy with the following keys:
(Default), String Value, not set
ItemCount, DWord, Decimal 2
ItemName1, String, Enable
ItemName2, String, Disable
ItemValue1, DWord, Decimal 0
ItemValue2, DWord, Decimal 1
kierandill said:
Under Verizon stock 6.5 ROM there are no keys there beginning with "V".
There is a folder called VoiceMail. It has one String Value key (Default) with an empty value.
There is a folder called VoicePrivacy with the following keys:
(Default), String Value, not set
ItemCount, DWord, Decimal 2
ItemName1, String, Enable
ItemName2, String, Disable
ItemValue1, DWord, Decimal 0
ItemValue2, DWord, Decimal 1
Click to expand...
Click to collapse
Thanks man
Your best bet is to back up your files and txt's or whatever you got, you can use WINDOWS MYPHONE @ www.myphone.microsoft.com , but create an account first (usually live account) then download the program to your cellphone, takes a while if you got alot of txt's to backup. theres also other backup programs too.
And then format the whole device to its factory settings. That's what I did. Not a smart with registry, but in school to learn more about it all i know is never to mess with it unless you know what to do.
unless you backed up your registry, a hard reset sounds like the right answer.
Yup. Registry backup is always the best thing to do before tampering it. Otherwise just doin a HARD RESET.

[Q] Opinions on the LG Quantum WP7 hacks ect...

I was just looking for some opinions... It seems to me that out of all the WP7 Devices, the LG Quantum is the easiest to make changes to simply because of MFG.
Debranding and unlocks take just a couple of seconds and seem to be more reliable when I look at all the different posts on here. Incase anyone is looking for them for the quantum, here they are btw...
LG "debranding" hack
1. Enable the MFG application by going to the dialer and dialing ##634# then pressing call.
2. Launch the MFG application and enter 277634#*# when prompted for a password.
3. Select the Engineer Menu item.
4. Select the Other Setting menu item.
5. Select the Edit registry menu item.
6. Set the input boxes on this menu as follows:
Select ROOT_PATH: HKEY_LOCAL_MACHINE
Input SUB_PATH: \System\Platform\DeviceTargetingInfo\
Input KEY: MobileOperator
Data Type: STRING
Instead of putting in a blank, put in an empty space.
Also, if you want to re-brand your phone after the update for AT&T your input should be ATT-US
7. Select Query and write down the result in case you need to re-brand for some reason.
8. To debrand just enter the same information above and leave the input data field blank. The tool will say fail but it really did set correctly.
You can now connect to Zune and check for updates.
How to Un-Lock your Phone without Chevron 7
You can unlock the phone by using the MFG registry editor.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Comm\Security\LVMod"
Set your input key to "DeveloperUnlockState" and set to DWORD
Hit Query. Output result should return a "0" or a random long number. If it does continue.
Set your input data box to "1" and hit SET. Output result should be 1
How To Keep Your Phone Unlocked
You can keep your phone unlocked and prevent Zune from re-locking it.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlProd" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Keep this screen open and continue to Part 2
Part 2
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlInt" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Backout to the password screen and shutdown the phone via powerbutton.
Reboot and sync. Your phone should stay unlocked.
How to Re-Lock your Phone without Chevron 7
Don't want your phone unlocked anymore? You can re-lock the phone by using the MFG registry editor.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Comm\Security\LVMod"
Set your input key to "DeveloperUnlockState" and set to DWORD
Hit Query. Output result should return a "1". If it does continue.
Set your input data box to "0" and hit SET. Output result should be 0
Your phone is now locked. To Unlock the phone redo the above steps but set back to "1"
Oh and I can confirm this unlock method works and keeps it unlocked.
Then once unlocked, if you combine it with the Chevron ringtone manager-> http://www.chevronwp7.com/post/20542...ngtone-manager, and any registry changes you know of such as changing themes and such, there really doesn't seem to be much you cant do with it. Is my opinion accurate? Or is it just skewed because I love this phone? Also, is the MFG the reason why it doesn't seem like anyone has worked on software for the phone like they have with the Samsung and HTC models?
Nothing unstable about my hd7. Wonder if LG ha finally broken the feature phone stigma.
Sent from my HD7 using XDA Windows Phone 7 App
@nrfitchett4
I have to say I think so with this one, i always hated LG, but i fell in love with the physical keyboard, even before NoDo i didnt have marketplace issues... out of the three from AT&T, this one is def my fave, and it seems like it is just so much easier to hack and change with MFG... with your HD7, does it have anything like MFG already on the phone? My understanding was HTC phones had to use software on ur PC to get inside

Categories

Resources