IPAQ 914c - Upgrading, Modifying and Unlocking

Please, can any one help me with a rom for my Ipaq 914?
I used the Windows Vista to update my phone and now is dead...
Where can i find a custom rom or a flash.dio for this model.
Please help me, i need my phone to work...
Thanks in advance

Zyrus said:
Please, can any one help me with a rom for my Ipaq 914?
I used the Windows Vista to update my phone and now is dead...
Where can i find a custom rom or a flash.dio for this model.
Please help me, i need my phone to work...
Thanks in advance
Click to expand...
Click to collapse
download the rom from HP support site, and re-flash it on a non-vista computer --- should work.

How can I update the ROM of Ipag 914c to change the language.
My original language of my phone is French so I want change it into English(international).
thanks in advance

Same question. Change language. This is not possible by Hp update NL->WWE.
I've extracted flash.nbf file from setup then cut the first 3431 bytes then copied to sd card as flash.dio.
.
What keys i should hold for sdloader mode volup-ok-reset didn't work for me. Only when i press side wheel with ok then i was get is Dowloading Qualcomm Image at top of screen then nothing happen...
please give some advice what can i do to change language.

http://forum.xda-developers.com/showthread.php?p=3055586

anyone know how to use mtty with ipag 914
thanks

I upgraded my Ipaq 914c with original ROM from HP and i have same results. DEAD.

I do the same mistake...
problem is windows Vista. So, please charge you phone to min 40% and try to update with original ROM from HP site but on Windows XP.
Flash is passed and you phone has been alive....

Hi all
Hey i m having a big qty of hp ipaq 914c with me can anyone help me to change the spanish rom to english.pls reply as soon as possible bcoz i tried everything posted before on this forum but never succeed so pls pls pls help me.
and one more thing i had the same problem in hp rw6815 so one of our forum member gave me an RUU patched which really worked an it was very easy an effective so if anyone can provide sthe same kind of RUU patched for the ipaq 914c i be really very greatful to him
Regards,
Moiz.

rom language
specify language when downloading new rom from hp site... then your rom will be in that language

Bricked Ipaq 914C
Hy,
I've bricked my 914C during an upgrade (for up. in italian sp43440.exe) i've forgotten my sd card inside and now the device became a brick!
When i turn on the 914 the writing "RUU...." appears and remains stuck on this screen. When I want to turn off the phone i must to remove the battery.
I tried to follow the following guide http://forum.xda-developers.com/showthread.php?t=511548 but i don't have XP, only Vista, which doesn't work with the information reported.
Please help me!

Related

Asus A696: WM6 update with different language

hi all,
i'm going to buy Asus A696. the problem is that it is not yet on the market in our country so i'm thinking to buy it from another country - it means different language version of WM5.
my question is: with coming update of WM6 would i be able to flash the device with different language version than previously installed WM5? all i would need is WM6 in english, i don't even need my mother language..
cheers!
I buy A696, I need change the language, French to inglish, is this possivel?
Tanks
yes, me too.
i have a696 with wm5 Engish, now i want to upgrade to wm6 Chinese.
can anyone help?
1.how to save current wm5 rom for backup?
2.how to pass the language check and upgrade to wm6 Chinese.
i only have the official wm6 file, it's the .img file, from asus site.
thank you very much. please help us out experts!
and yeah, if i can flash out and save my English wm5 rom, i can share it with upstairs. so you flash my English Wm5 first, and upgrade to Enghlis wm6 directly!
isn't that sound good to you guys?
so, everyone else, please help us.
anyone has experience flashing to another language? where can one get ROM?
I tried, with the official version of Asus, but don't work, says "Language doesn't match"
We have to wait for xda patch.
Tanks
afm said:
I tried, with the official version of Asus, but don't work, says "Language doesn't match"
We have to wait for xda patch.
Tanks
Click to expand...
Click to collapse
me too i try to change spanish to italian language, and write me the same in italian: "Language doesn't match"
i need help please, how can we translate to another language our pocket pc???
i got an asus p535 and wm6 spanish pre-installed.. and i've just make a dump of my rom... (dump rom asus p535 español wm6)
look this thread and check if you can apply this method on your firmware
http://forum.xda-developers.com/showthread.php?t=308611
tonyso68 said:
and yeah, if i can flash out and save my English wm5 rom, i can share it with upstairs. so you flash my English Wm5 first, and upgrade to Enghlis wm6 directly!
isn't that sound good to you guys?
so, everyone else, please help us.
Click to expand...
Click to collapse
In the other post the user "Vakar" wrote:
If you know what to do:
I shared some files:
A696_dump_wm5_eng.rar - _http://zip.z0m.ru/3280097
_http://www.mediafire.com/?82x0ercwae9
Not approved -
A696_dump_wm6_2_eng.rar - _http://www.mediafire.com/?czeymj2nl5x
USBLoader.exe - _http://zip.z0m.ru/3279749
_http://www.mediafire.com/?fa9a9vp2knb
What we can do is:
1. attach PDA to the PC with USB cable and wait for ActiveSync to sync
2. open a command prompt
3. run pdocread -t
4. run pdocread -l
5. run pdocread 0x0 0xXXX nk.nb0 where 0xXXX is the size of the rom returned in the step 3 (for our WM5 should be 0x2200000)
6. wait until the process finish
Now we got a copy of our original PDA firmware
To upgrade the PDA back to the origiginal or to another version we got, we have to:
1. attach the PDA to the PC with USB cable and CLOSE ActiveSync
2. press on the PDA the keys POWER+ENTER+RESET, the PDA bootloader will start in upgrade mode by USB and wait for the firmware from the USB
3. use usbloader to upload our nk.nb0 or any other firmware we got to the PDA
This is what I have read from that forum, but I've not tested jet cause I have only the copy of my firmware and waiting that someone make a copy of his english PDA to be able to upload the WM6 WWE update.
That is the user "l0v3r" says in the other post.
Nothing workes A696
I have bought the german version of a696 and I am stuck. I can`t change the leanguage to english. None of the solutions for other devices seem to work with a696. Could somebody please help me out ??? I am a winhex noob and the whole thing is killing me!!!
Kovic said:
I have bought the german version of a696 and I am stuck. I can`t change the leanguage to english. None of the solutions for other devices seem to work with a696. Could somebody please help me out ??? I am a winhex noob and the whole thing is killing me!!!
Click to expand...
Click to collapse
take the original asus 696 WM6 WWE upgrade and change the value if you
have the same original value
http://forum.xda-developers.com/showpost.php?p=1483731&postcount=68
(set winhex offset in decimal/hex , double click on blue value)
Language:__original WWE_GER
12 (0C):_______09_______07
2028 (07EC):___5C_______40
5536 (15A0):___51_______5F
you can try this patch to, but check the result after
http://forum.xda-developers.com/showpost.php?p=1489893&postcount=104
If you want to upgrade from WM6 to another language look the EDIT
in this post.
http://forum.xda-developers.com/showpost.php?p=1494951&postcount=125
(no feedback for the moment)
dont forget to follow the official asus upgrade procedure
remember it's your own risk
Kovic said:
I have bought the german version of a696 and I am stuck. I can`t change the leanguage to english. None of the solutions for other devices seem to work with a696. Could somebody please help me out ??? I am a winhex noob and the whole thing is killing me!!!
Click to expand...
Click to collapse
Do you try my previous post?
I am testing it now. The first part is all right no language problem, now there is a version problem. Update older than the pda.
Kovic said:
I am testing it now. The first part is all right no language problem, now there is a version problem. Update older than the pda.
Click to expand...
Click to collapse
You tested with the "AsusWM6Patch_1_0_2" ?
Version problem?
afm said:
You tested with the "AsusWM6Patch_1_0_2" ?
Version problem?
Click to expand...
Click to collapse
this tools dont change the version number.
have you try to change the version number yourself ?
A626/A686/A696 V03.0735.00 English version
159C: DF 02 (2DFh=735)
change to
159C: E0 02 (2E0h=736)
Thanks to "l0v3r" I changed the language of my pda.
I use "AsusWM6Patch_1_0_2", my Pda is A696.
Good work
Thanks
Done
The full flahing procedure (usbloader) worked with the dump file that was reported earlier. Best regards !!!
hi there, who can help me to change my language on my asus p535.
now i got asus p535 with wm6 spanish but i need to change in italian.
i need a patch for make official upgrade asus from spanish to italian.
please help me
[email protected]
take a look here: http://forum.xda-developers.com/showthread.php?p=1601064#post1601064
'd like to downgrade my 696 Hebrew 735 firmware to English 719.
I downloaded the 719 English ROM from Asus website and changed all hex codes
according to this thread to show the same codes as 735 Heb + changed the version check to 736 (2E0h) on 159C...
ran the Upgrade Tool WW.exe and..nothing. it just did a hard reset. What am I doing wrong.......?
or better off, does anyone have 696 English ROM dump (taken with procread) with WM6 prior to 735...?
change rom languange from german to english Asus a696
I buy a696 with german rom WM6
i tried to change rom from german to english but unsuccessfull
i follow all instructions from ChiemY
{ http://forum.xda-developers.com/showthread.php?t=309388&highlight=asus&page=2 }
with upgade tools ,change rom etc.
if is possible to send ready wwe rom wm6 for a696
many tnks

Complete package for upgrade hx2xxx to WM6

Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!
I've an hx2415... would it works?
and when I've finished to DL... what must I do?
I've to Use Pre-BL mode?
'coz doesn't works for mine
I'm on WM5 but it's going really slowly ...
...I'm not able to upgrade to WM6 (SKU problem...?) and I need help about it...
Question: it's normal that PDA going so slow with WM5 ? when I clic on "settings" 2 (or 3) seconds needed
Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx
Did you succed download ?
zeRobee said:
Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx
Click to expand...
Click to collapse
============
DEAR
Is all OK ? You succed to download and to INSTALL wm6 ?
Please give me directions :
i have Hx2110 .
thanks
Please directions //....STEP BY STEP!
dancer_69 said:
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!
Click to expand...
Click to collapse
------------------------------------
Please directions //....STEP BY STEP!
Who is Niko512 ?
It is a Greek ?
gia sou Niko ....
Anyone had any success with an ipaq 2410 as every attempt at it has resulting in hanging at formatting PS right at the end.
If anyone could provide a guide that would enable me to use WM6 on the 2410 Id be grateful.
Even followed this with no success
http://forum.xda-developers.com/showthread.php?t=372799
EDIT: Finally got WM6 on my mobile thank **** for that.
Having trouble to upgrade my hx2410 WinCE4.21 to WM5
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks
benkud said:
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks
Click to expand...
Click to collapse
You can't update device through Bluetooth - it's impossible
You will need a USB cable or Cradle.
Go to my thread LINK and read first 3 posts

Please help !!

Hi all, i got a little big trouble , i recenly upgraded my hp ipaq hx2415 with the latest aku 3.52 by khozura but something has gone wrong ... it doesn't tur on ... i can just reach the pre-bl by removing battery and pressing contacts and itask keys ... when i try to upgrade it tells me unknown language upgrade cannot continue .. i know u would advice me to try the universal bootloader tool .. but the point is that i've just tried it no problem with connecting to my wceusbh port but ... it just opens mtty and the terminal window just stucked wid no operation doing ..... help me i don't know what to do ... i would try to hack the hpruu.exe to avoid language checkin' and go straight to rom upgrade because only hpruu seems to be able performing the upgrade .... i'm lost help me thanks ..............

LooxN520 doesn't boot

Hi,
I am new in this forum and I hope you could help me to solve my problem. I have a loox N520 PDA. I have tried to update the PDA with the GPS fix provided by fujitsu. The first part of the upgrade has been correctly installed but after the reboot, the PDA does not load WM. I only have a screen with dolphins and a the top of this screen have 2 lines of characters :"1.20.G3" et just below "1.21."
Is it a problem with the ROM? I hope there is a solution to solve this problem. I have already download the romIhave found in this forum for thr loox N520but Idon't know howcanI use it at this state. If you have a solution, please explain me.
Please,I need your help.I am afraid to have done something wrong with this update and I hope that my PDA is not to pu in the trash...
Thank you
PS: Sorry for the mistakes, I think that my english is not very good..

windows mobile 5 on imate pda2k / qtek 9090

how can i do this?i tried to download a lot of files from this website but they didn't work....
can you help me? i'm italian.
can you make me a simple guide to change the rom in my phone?
thanks a lot
yes plz...same problem here
any one
You have to read and understand English. This should be enough to upgrade even to WM6.1. Start using Wiki.
PS: downloading files without understanding what are they for is the best way not to do anything or to destroy your device.
what i mean to say is that i want to upgrade my imate pda2k windows from 4 to 5..
for that the file named Version 5.1.1700 Build 14343 - Patched by Mamaich V3
on this link is not downloadable..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
can someone help me to get this file plz....
thank u

Categories

Resources