NRG Rose Rom v1.6a - Remade by Ricky and Stylez
New ROM for the Excalibur cooked on the new 20279
This ROM has new Radio (4.1.13.51_03.07.90)
And Now Has The patched USPL That jockyw2001 Made
You May Ask What Is A Patched USPL Well
Flash (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you
perform a full ROM update. Consider it as an extra insurance in case
something goes wrong with flashing cooked ROMs or any other ROM
update ! click here for more details
WHY DID I MAKE A ROM WITH JOCKYW2001 PATCHED USPL:-
Will i made this rom for my Brothers and Sisters who have these Excaliburs
O2 XDA Cosmo Orange SPV E600
Because they do not have a official roms to go back to if something goes wrong
but anyone with a Excalibur can use this rom to
Disclaimer Plz read:-
(1) I or any creators of the USPL or the Rom are NOT responsible for any phone being bricked
(2) THERE WILL BE RED WRITING ON YOUR BOOT SCREEN THIS IS NORMAL SEE Boot Screen.jpg!!!!!
(3) ANYONE WITH A EXCALIBUR CAN USE THIS ROM
(4) REMEMBER THAT ONCE YOU HAVE THIS ROM THEN THERES NO NEED TO RUN
AUTO.BAT ANYMORE
Were is mine and stylez Original Rom:-
Well click here to get it
Finally Hope You like The Rom CLICK HERE TO GET IT
Thanks to NRGZ28 for making the original ROM for his thread
Click Here
Thanks to Jockyw2001 for his patched USPL for his original thread
click here
So just wondering Ricky, does this Rom have the new radio which is not included in your previous Rose rom?
jdoggraz said:
So just wondering Ricky, does this Rom have the new radio which is not included in your previous Rose rom?
Click to expand...
Click to collapse
this rom has the same radio as kavans hope this helps
rickwyatt said:
this rom has the same radio as kavans hope this helps
Click to expand...
Click to collapse
Oh ok thank you. So since I have an excalibur and I am running your 1.6 Rose Rom Remake, I won't need to upgrade to this? correct?
jdoggraz said:
Oh ok thank you. So since I have an excalibur and I am running your 1.6 Rose Rom Remake, I won't need to upgrade to this? correct?
Click to expand...
Click to collapse
no only if you what the patched uspl witch mean it cid unlock until you
perform a full ROM update
rickwyatt said:
no only if you what the patched uspl witch mean it cid unlock until you
perform a full ROM update
Click to expand...
Click to collapse
Oh ok well this is not for me, but it could be useful for many other people...
Once again thanks for putting this together.
perhaps i should find out why i am geting a corrupt rom file error
Still sticking with you and Stylez's 1.5 but, as stated, thanks for keeping on keeping on for those who need it. Kudos (not the granola bar)
Hey RickWyatt thank you for the rom. Quick question: What happened to the menu animations? You know, like when you're in file explorer, you press the 2nd softkey, and the menu slides up? Where did it go? How do I get it back?
Also, Ive noticed that the Office mobile panel has the office logo. So, my other question is, how do I change the icon of a panel? For example, I want to change the colorless Windows Media player icon to something else. please see below:
Anyone home?
wreiad said:
Hey RickWyatt thank you for the rom. Quick question: What happened to the menu animations? You know, like when you're in file explorer, you press the 2nd softkey, and the menu slides up? Where did it go? How do I get it back?
Also, Ive noticed that the Office mobile panel has the office logo. So, my other question is, how do I change the icon of a panel? For example, I want to change the colorless Windows Media player icon to something else. please see below:
Click to expand...
Click to collapse
to trun animation on open resco registry editor and go here
[HKEY_LOCAL_MACHINE\System\GWE]
Animate from 0 to 6
to chang the icon use chome config hope this helps
Just an opinion, but maybe you guys should offer two version of the ROM, one with the patched SPL in it and one without. Not everybody wants a non-stock SPL on their phone, especially for warranty issues
So... what software is in this ROM? What Java version?
jrronimo said:
So... what software is in this ROM? What Java version?
Click to expand...
Click to collapse
The same as NRG Rose Rom v1.6 - Remade by Ricky and Stylez in sig only difference is patched USPL
I was wondering everytime I download and have started using the 1.6 or 6.1 versions by ricky my screen goes white is there something that I am doing wrong. Because I like the extras he has but I just hat seeing my screen white.
msjcorbett said:
I was wondering everytime I download and have started using the 1.6 or 6.1 versions by ricky my screen goes white is there something that I am doing wrong. Because I like the extras he has but I just hat seeing my screen white.
Click to expand...
Click to collapse
Do you mean your screen goes white when it times out naturally? If so, I had the same problem when I installed Windows Live. Uninstalling it fixed the white screen issue. But I only had this problem with the Rose ROM...never had it with 6.1.
Edit: I'm referring to the menu animations that are unique to the Rose Rom. The animations you pointed me to are already available in a regular 6.1 Rom via settings>Acessibility... I'm talking about the way the menu slides up when you're in for example, file explorer or Wmp. I miss that. I think it's still in the older Roms..
I enabled animations in my original 1.3 ROM because I think they're neat.I dont know why these guys disabled them... I forget what the registry entry is right now, but it's somewhere in HKLM/System/GDI or something.... Under GDI anyway.
NRGZ28 said:
I enabled animations in my original 1.3 ROM because I think they're neat.I dont know why these guys disabled them... I forget what the registry entry is right now, but it's somewhere in HKLM/System/GDI or something.... Under GDI anyway.
Click to expand...
Click to collapse
So have you found out how to get them back? I don't want to flash my phone again...
Edit: I ended up flashing my Dash back to NRGZ28's original rom.
Edit2: The registry values are exactly tthe same..
Edit3: I flashed back to this rom.. It's better than the NRGZ28's original in terms of usability.. But I still want the eye candy. If anyone finds out how to get back the animations, please tell me!
Related
Ok, I have upgraded my Hermes to WM6 using the ROM on the wiki site.
I have installed all my apps and everything was looking great. I then noticed the Extended ROM and half a dozen cab files. So I have installed all of these as assumed they were some sort of patches.
I carried on installing my apps but now after a reboot the SIM PIN Lock entry screen looks a really basic (non 3d) button version and the keypad that should be shown when pressing the green call button isn't displayed I just get a white screen.
I have installed the following apps:-
eWallet 5
Tomtom 6
PocketBreeze 5.2
Phone Alarm + VistaMedia skin
Any ideas on what has happened?
Do I need to re-flash my phone?
Help..
Thanks
Mark
mdavenport said:
Ok, I have upgraded my Hermes to WM6 using the ROM on the wiki site.
I have installed all my apps and everything was looking great. I then noticed the Extended ROM and half a dozen cab files. So I have installed all of these as assumed they were some sort of patches.
I carried on installing my apps but now after a reboot the SIM PIN Lock entry screen looks a really basic (non 3d) button version and the keypad that should be shown when pressing the green call button isn't displayed I just get a white screen.
I have installed the following apps:-
eWallet 5
Tomtom 6
PocketBreeze 5.2
Phone Alarm + VistaMedia skin
Any ideas on what has happened?
Do I need to re-flash my phone?
Help..
Thanks
Mark
Click to expand...
Click to collapse
Which version have you upgraded to?? If it is v0.20.x (thats 0.20.0 or 0.20.1) this is a known issue, seriously recommend reading the thread concerned with the ROM you are flashing before going ahead (the link for the thread is in the table aswell).
mrvanx said:
Which version have you upgraded to?? If it is v0.20.x (thats 0.20.0 or 0.20.1) this is a known issue, seriously recommend reading the thread concerned with the ROM you are flashing before going ahead (the link for the thread is in the table aswell).
Click to expand...
Click to collapse
Hi,
My ROM Version is 3.22.110.1
I installed it from the 1st option in this list:-
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I installed from Mirror 5
I am little confused, is there a way to overcome this issue. Im bit of a newbie so do appreciate your help..
Mark
mdavenport said:
Hi,
My ROM Version is 3.22.110.1
I installed it from the 1st option in this list:-
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I installed from Mirror 5
I am little confused, is there a way to overcome this issue. Im bit of a newbie so do appreciate your help..
Mark
Click to expand...
Click to collapse
So you installed the 'Vanilla' version?? (look at the names on the left side)
mrvanx said:
So you installed the 'Vanilla' version?? (look at the names on the left side)
Click to expand...
Click to collapse
Yes it was the Vanilla version. I have done the wrong one?
Can you point me in the direction of the fix if there is one?
Thanks again
Mark
mdavenport said:
Yes it was the Vanilla version. I have done the wrong one?
Can you point me in the direction of the fix if there is one?
Thanks again
Mark
Click to expand...
Click to collapse
The best thing to do is to is to perform a 'Hard Reset' which will reset your device back to the same point as when the rom was flashed, so you will need to reinstall everything. Suggest you install the same things again but dont install the skin....this might be incompatible with WM6 (since nearly all skins are designed for use in WM5).
BTW, i would take some time to read through the wiki and familiarise yourself with the various reset types and other literature on ROM upgrades, the knowledge in these pages will hold you in good stead for the future sir
mrvanx said:
The best thing to do is to is to perform a 'Hard Reset' which will reset your device back to the same point as when the rom was flashed, so you will need to reinstall everything. Suggest you install the same things again but dont install the skin....this might be incompatible with WM6 (since nearly all skins are designed for use in WM5).
BTW, i would take some time to read through the wiki and familiarise yourself with the various reset types and other literature on ROM upgrades, the knowledge in these pages will hold you in good stead for the future sir
Click to expand...
Click to collapse
Ok, thanks for your help.
Just one other question. Should I have ran all the CAB's from the Extended ROM?
mdavenport said:
Ok, thanks for your help.
Just one other question. Should I have ran all the CAB's from the Extended ROM?
Click to expand...
Click to collapse
Not really....the best thing you can do is to leave the ext_rom alone and just manually configure your MMS and WAP settings by hand. The ext_rom (again) contains cab installers that are designed for WM5.....while most should work in WM6 there are some that dont. ext_rom is something i havent used for ages in XDA-Live (v0.1 and now 0.2) and I dont miss it.
Just install the apps you were running (phonealarm and others). The ext_rom doesnt do much except run carrier based stuff (like themes and automatic settings).
Guys....
I saw this thread below & wondering how can I install it on my D810?
http://forum.xda-developers.com/showthread.php?t=321733
It says that it must be cooked with ROM, so it means for ROM cooker only. How about for me (not a ROM cooker)??
I love that battery icon with percentage, I had it on Karmba ROM & black & blue ROM. But now I am running Axel's ROM, because its more stable.
Anyone can help me?
widigol said:
Guys....
I saw this thread below & wondering how can I install it on my D810?
http://forum.xda-developers.com/showthread.php?t=321733
It says that it must be cooked with ROM, so it means for ROM cooker only. How about for me (not a ROM cooker)??
I love that battery icon with percentage, I had it on Karmba ROM & black & blue ROM. But now I am running Axel's ROM, because its more stable.
Anyone can help me?
Click to expand...
Click to collapse
You can not install it on your own, as it it written there, it has to be cooked which means it has to be inside the ROM when it flashes.
MARY's ROM has those icons too (if I'm not mistakin').
It CAN be installed separately, no problem at all.
Simply download the CAB file with the colors you like it in the attachments, install it, and after a soft reset you have it running.
I've been using it on my Trinity WM6 wit no problems, and it's really great
yep the cabs can just be ran and they'll work. no need to cook it in. those icons actually i believe will work on all wm6 devices.
Pawel062 said:
yep the cabs can just be ran and they'll work. no need to cook it in. those icons actually i believe will work on all wm6 devices.
Click to expand...
Click to collapse
With all do respect, but isn't this contrary to what you and bennec83 say in red colour and bold font?
KamaL said:
It CAN be installed separately, no problem at all.
Simply download the CAB file with the colors you like it in the attachments, install it, and after a soft reset you have it running.
I've been using it on my Trinity WM6 wit no problems, and it's really great
Click to expand...
Click to collapse
any screenshots?
I am asking here, because I read that it must be cooked......anyone had succed with the battery icon without cooked your own ROM?
tnyynt said:
With all do respect, but isn't this contrary to what you and bennec83 say in red colour and bold font?
Click to expand...
Click to collapse
That's the OEM package, which I suppose was not signed and as such, needs to be cooked in to bypass the WM5 security model introduced by M$.
The cabs were signed by the sdk developer privileged cert, which should work in any WM5 devices after the sdkcert.cab was installed.
ww2250 said:
That's the OEM package, which I suppose was not signed and as such, needs to be cooked in to bypass the WM5 security model introduced by M$.
The cabs were signed by the sdk developer privileged cert, which should work in any WM5 devices after the sdkcert.cab was installed.
Click to expand...
Click to collapse
May I know which file should I download?
tnyynt said:
With all do respect, but isn't this contrary to what you and bennec83 say in red colour and bold font?
Click to expand...
Click to collapse
it says for packages meaning oem packages. cab u install like normal.
btw the text is in post 2 where oems are. no warnings in post 1 where cabs are.
widigol said:
any screenshots?
I am asking here, because I read that it must be cooked......anyone had succed with the battery icon without cooked your own ROM?
Click to expand...
Click to collapse
screenshots when u go to that thread
ww2250 said:
That's the OEM package, which I suppose was not signed and as such, needs to be cooked in to bypass the WM5 security model introduced by M$.
The cabs were signed by the sdk developer privileged cert, which should work in any WM5 devices after the sdkcert.cab was installed.
Click to expand...
Click to collapse
correct. download cabs and run without any problem
Well....I have tried the .cab in the 1st post....it works fine
Installed the sdkcert.cab first, then instal the .cab
thanks guys
Hi,
I saw it three days ago, but it disappeared. I cannot find it anymore.
Does someone have it to support me? Please... Thanks a lot.
Hi,
Unfortunately it seems that Meschle the guy who made the rom has retiered from the forum without letting his work...
Good bye and farewell for him who did a great job
Put this in google:
artemis touch 4.02
and then 3rd Link!
Is it late?
I counldn't reach it.
Please~~
Check here
WTF, if retired, why did he remove all his posts for ROMs !!!!
Totally Unethical.
Because he made them and if that it his decision than so will it be.
EazyVG said:
WTF, if retired, why did he remove all his posts for ROMs !!!!
Totally Unethical.
Click to expand...
Click to collapse
i support you......he could have deleted the links to the rom removed all the uploaded files but deleting all the threads is not ethical.....i had a bug which was listed in the page..and when i tried to search it...it was all gone...thanks to google caching i was able to get the old page...but i am not in favor in deleting the entire thread.....if this can be taken care of.....please do so.....mods if possible please put a notice of somekind so people can see the problems earlier instead of having a conscious attack later and others people stands helpless......
some Meschle Rom's (Touch 1 - Touch 4.02)
You can also find some of Mark's ROMs here on my mediafire share.
petervbeck said:
You can also find some of Mark's ROMs here on my mediafire share.
Just uploading some of the older versions (1.0 etc)
Click to expand...
Click to collapse
Thanks Peter,
Those rapidshare links are PIA especially with Rapidshare new annoying security check ( can never pass it, i wish RS rots in hell). Mediafire is decent.
And i agree with gandotratushar!
petervbeck said:
You can also find some of Mark's ROMs here on my mediafire share.
Click to expand...
Click to collapse
What about vanilla 4.02? I dont see that on there, or did i miss it?
Also how dose he feel about people putting his ROMS up for download? Is he cool with that?
Thanks, lee.
leethedon1 said:
Also how dose he feel about people putting his ROMS up for download? Is he cool with that?
Click to expand...
Click to collapse
sorry, i don't have 4.02 vanilla....but here's a link. Will download and add to my roms also...
what Mark says about hosting somewhere else:
meschle said:
I have taken the roms with me but no doubt you will find them elsewhere.
Click to expand...
Click to collapse
Vanilla 4.02
Vanilla 4.02 is up now...
now no have choice Artemis Touch 4.02 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Full, Lite and Vanilla)
in Best ROM for Artemis
you're so great
freco said:
Check here
Click to expand...
Click to collapse
i finally found what i needed...but now i have a question..
how can i open the cube. I got it once, but then it disappappeared. Is there a instruction for this rom?
Second question. The bottom and the top of the dispay are green, how can i change them? For example to black??
and last but not least...My Tomtom program has gone. I couldn't find it on the device. When i plug it to the pc an try to connect with the tomtom software, it shows me, that the maps etc are still on the storage card. But i cannot launch the navigation. Also when i use the gprs buton on the left side a strange page comes and somewhere stands, that there is no fix..or something? Whats a fix?
What should i do now, that i still can use this rom Artemis_Touch_4.02_Full_with_4_sided_cube but also my navigation??
thx a lot..
ahuysa said:
i finally found what i needed...but now i have a question..
how can i open the cube. I got it once, but then it disappappeared. Is there a instruction for this rom?
Second question. The bottom and the top of the dispay are green, how can i change them? For example to black??
and last but not least...My Tomtom program has gone. I couldn't find it on the device. When i plug it to the pc an try to connect with the tomtom software, it shows me, that the maps etc are still on the storage card. But i cannot launch the navigation. Also when i use the gprs buton on the left side a strange page comes and somewhere stands, that there is no fix..or something? Whats a fix?
What should i do now, that i still can use this rom Artemis_Touch_4.02_Full_with_4_sided_cube but also my navigation??
thx a lot..
Click to expand...
Click to collapse
1. find it here,there is some text and a pic
2.settings>today>themes
3.you have to find tom tom installation (cab or exe)...i think there is a file in the wiki(slick my signature) because when you flashed the rom,all that was included in the original one was replaced or deleted
install it and it'll work
also,now that you have to download it anyway, i'd suggest you trying iGO6 iGO8,it's great and much smarter and less annoying than tomtom
petervbeck said:
You can also find some of Mark's ROMs here on my mediafire share.
Click to expand...
Click to collapse
Thnx for sharing there m8, exidently deleted my my meschle rom folder on my pc.
Now have most of them back, gonna go back to a 3.x vanilla or test the others again to compare them to the wm6.1 roms
Missing important file..
There was a .cab file posted by meschel in his original post which enabled 'messege sent' notification when sending a txt.
The rom's have not got this feature as standard and need this .cab file to fix it.
Its looking really hard to find as people only have the roms and not the extra .cab file he posted too..
Anyone have it?
leethedon1 said:
There was a .cab file posted by meschel in his original post which enabled 'messege sent' notification when sending a txt.
The rom's have not got this feature as standard and need this .cab file to fix it.
Its looking really hard to find as people only have the roms and not the extra .cab file he posted too..
Anyone have it?
Click to expand...
Click to collapse
See here:
http://forum.xda-developers.com/showpost.php?p=2327258&postcount=19
Cheers
You can also disable that notification with Schaps Advanced Configuration (3.3 is the newest I guess)
29 july 2009 : O2 have released a rom update for the uk ignito, see last page
i have removed the link for my reconstructed rom to avoid confusion
check this link out for the download
http://www.my-xda.com/software_updates.jsp
idrisito said:
so who out there is man enough to try my rebuilt O2 XDA Ignito ROM 1.93.206.3 WWE (for warranty purposes), i rebuilt it using the tools in this forum and as far as i ROM it built ok!
beware you should have hard spl before you try to install, if you do install it, i and many others will be very greatful.
i havent tried it because i dont have hard spl intsalled and dont wanna loose my warranty.
http://www.mediafire.com/download.php?ikhxwez3inn
go on whats the worst that could happen! lol!
try at your own risk! but please try !
feedback on device info.... will be much appreciated
Click to expand...
Click to collapse
go on whats the worst that could happen!...you could make lots of bricks
yeah but the risk is quiet low with hard spl !
can i get the help of an experienced cooker ?
i used to cooks roms with my trinity, so i guess i am fairly familiar with this sort of thing!
Hi man. Did you include radio? splash?
Hey
Can you post the Official O2 Stock ROM here.
chand4u76 said:
Hey
Can you post the Official O2 Stock ROM here.
Click to expand...
Click to collapse
if you look at the 1st post...your see the link
but incase you can't here it is anyway
http://www.mediafire.com/download.php?ikhxwez3inn
i changed nothing! so this is OS only!
Cheers..
idrisito said:
i changed nothing! so this is OS only!
Click to expand...
Click to collapse
Thanks drisito.
Seems like a very responsive and quick ROM, changed the mailla bar to "panasha manilla HTC original" looks cool in white now plus I can make out what the icons are better.
http://forum.xda-developers.com/showthread.php?t=427914
Has anyone installed and confirm that this is working
gadjet said:
Thanks drisito.
Seems like a very responsive and quick ROM, changed the mailla bar to "panasha manilla HTC original" looks cool in white now plus I can make out what the icons are better.
http://forum.xda-developers.com/showthread.php?t=427914
Click to expand...
Click to collapse
Can I assume that you've installed this ROM and it's working ok?
Work AOK...
sutepm said:
Can I assume that you've installed this ROM and it's working ok?
Click to expand...
Click to collapse
Hi sutepm.
Yes installed it, then my 05 radio, seems very fast so far. Testing TomTom 7 on my way home from work.
Got 72 Mb free storage and 43 Mb free program memory with only a few small programs installed.
sutepm said:
Can I assume that you've installed this ROM and it's working ok?
Click to expand...
Click to collapse
yeah same question here !
please leave more feedback regarding the rom, if you have installed it!
please confirm it is my ROM (O2 XDA Ignito ROM 1.93.206.3 WWE) which you have installed and not someone elses.
Cheers..
idrisito said:
yeah same question here !
please leave more feedback regarding the rom, if you have installed it!
please confirm it is my ROM (O2 XDA Ignito ROM 1.93.206.3 WWE) which you have installed and not someone elses.
Click to expand...
Click to collapse
Hi idrisito.
Yes ROM was downloaded from your first post, http://www.mediafire.com/download.php?ikhxwez3inn
My device info now reads:
ROM version: 1.93.206.3 WWE
ROM date: 07/10/08
Radio: 1.00.25.05 (I flashed this seperatly)
Protocol version: 52.29.25.12H
Thanks again...
Here is a screen dump with the panosha manilla icons.
can someone post o2 splash?
If I can help..
sumitescp said:
can someone post o2 splash?
Click to expand...
Click to collapse
Hi sumitescp.
Point me in the right direction and i will upload, is it in the windows directory?
alright i'm well impressed ! all hail idrisito! lol!
now i can start flashing some of the other roms.
i have the original spl 1.93.0.0 if you guys want it i can upload it!
cheers for testing it gadjet!
the original splash screen should be like a blue wave with o2 elcome written in white! can you confirm?
i will try to dig this out and post it if i can find it again
idrisito said:
alright i'm well impressed ! all hail idrisito! lol!
now i can start flashing some of the other roms.
i have the original spl 1.93.0.0 if you guys want it i can upload it!
cheers for testing it gadjet!
the original splash screen should be like a blue wave with o2 elcome written in white! can you confirm?
i will try to dig this out and post it if i can find it again
Click to expand...
Click to collapse
No O2 splash screen, just the green windows mobile version 6 screen..
Yor ROM is getting really tested now.
Moving clock here http://forum.xda-developers.com/showpost.php?p=2709712&postcount=275
right so this means we have to find a way of extracting the o2 splash screen from the phone!
anyone got any ideas on how to do this? or does any one have the splash screen picture?
encorporating it in to the ROM should not be a porblem as long as we can find it!
Query..
idrisito said:
right so this means we have to find a way of extracting the o2 splash screen from the phone!
anyone got any ideas on how to do this? or does any one have the splash screen picture?
encorporating it in to the ROM should not be a porblem as long as we can find it!
Click to expand...
Click to collapse
Hi idrisito.
Still testing your supplied ROM, how did you come by it or extract it?, the reason i ask is that the normal ROM's I download are complete and come with the operators or developers ROM and splash screens etc?
The sample Kitchen contains a new base rom Diamond_hTC_Asia_WWE_2.01.707.3
Download and full thread at DFT:
http://www.darkforcesteam.com/showthread.php?t=569
happy cooking, bepe
hello bepe welcome back sory to ask
i would like to know were and how can i get the keyboard u had on the v99 rom of urs is it possible u can make a cab for this please i been going crazy for this keyboard u got on that rom
Good to see you!!! Happy New Year.... look forward to giving this a try
Great news!
Very interesting, thank you!
Nice to see you back Bepe!!
the MASTER is back
bepe, excellent work! Trying to cook my rom using your kitchen and all is ok. But when flashing this rom - I have color lines on the screen. Device start to load only after battery remove... After that rom started ok.
Dynomite232 said:
hello bepe welcome back sory to ask
i would like to know were and how can i get the keyboard u had on the v99 rom of urs is it possible u can make a cab for this please i been going crazy for this keyboard u got on that rom
Click to expand...
Click to collapse
This picture is the standard WM keyboard... not sure if you really mean this one, because it should be in your rom already...
korand said:
bepe, excellent work! Trying to cook my rom using your kitchen and all is ok. But when flashing this rom - I have color lines on the screen. Device start to load only after battery remove... After that rom started ok.
Click to expand...
Click to collapse
Hm... this is really looking strange...
Never had this problem, did you do any changes to the display drivers?
bepe said:
Hm... this is really looking strange...
Never had this problem, did you do any changes to the display drivers?
Click to expand...
Click to collapse
No. It's happened only while flashing on approximately 20-30%. Only lines on device screen, but on PC progress bar goes to 100% and device restarted (vibrate). After that I need to remove the battery to start device and it's started normally with flashed rom.
korand said:
No. It's happened only while flashing on approximately 20-30%. Only lines on device screen, but on PC progress bar goes to 100% and device restarted (vibrate). After that I need to remove the battery to start device and it's started normally with flashed rom.
Click to expand...
Click to collapse
The kitchen does not and can not have any effect on the flashing process, so it must be your device I think...
In the RELEASE folder I've used the original RUU files for flashing... this could be the only thing affecting your device... you can try other tools, but the tools in there where working fine for me
korand said:
No. It's happened only while flashing on approximately 20-30%. Only lines on device screen, but on PC progress bar goes to 100% and device restarted (vibrate). After that I need to remove the battery to start device and it's started normally with flashed rom.
Click to expand...
Click to collapse
If this would happen to me, I would flash all parts like Radio SPL and OS again... this helped me once with another problem.... but no guarantee from my side...
:/ why hotlink to a forum that requires registration and then acceptance by a moderator? just upload it here...
bepe said:
If this would happen to me, I would flash all parts like Radio SPL and OS again... this helped me once with another problem.... but no guarantee from my side...
Click to expand...
Click to collapse
I think it's my device problem. On flashing other roms the same Flashing full rom didn't help. Maybe flash memory corrupted?
bepe said:
This picture is the standard WM keyboard... not sure if you really mean this one, because it should be in your rom already...
Click to expand...
Click to collapse
what im asking for is how your keyboard can do this in every layout phone qwerty full all layouts is it t9 ezinput wut is it can u make a cab out of it from ur v99 rom please
wierd becuase it only works with ur rom and every other cooked rom it dont do what urs does like in total cammander for example
this is what im talking about