Related
Hey guys I know this is not the unlocking thread but I tried posting on the thread made by "coke" with no response. So I thought I'd do it here. So here's the story
I have a Sprint Vogue and I was really getting tired of the slow HTC WM 6.1 and all the buttons that I could not modify on the cube (which is useless cuz I dont use any of the them). So I decided to try out a new rom with 6.1 and touchflo 2D.
I went to the ppcgeeks forum to unlock the phone, followed the instructions, read and reread the posts. Finally decided to give it a go. Everything went smoothly until the last step (exitbl) of coke 2.31. It kept telling me to disable USB on activesync and then the program would just shut down! ?? And yes I did disable the USB option for the activesync before that step. I looked under the device information and realized that nothing has changed interms of the ROM. So I tried it again and again (4 times). Then I just reinstalled the HTC 6.1 rom with the 3.42.30 radio... So any ideas on why this may be happening? I promise I followed all the steps
My second question is, in your opinions, what is the most reliable, stable and fast Touch 6.1 rom? Let me know if you have an opinion.
Thanks so much in advance, any help would be appreciated.
I had what sound like the same problem yesterday.
my post is over at ppcgeeks.
"I disconnected but I did not see the phone exit bootloader mode and reset itself.
....
What should I do from here?
Reboot phone, soft reset, hard reset? - go have fun?
....
I did a couple soft resets and have been playing around with it,
I guess I upgraded right... but it was weird there at the end, instructions not the clearest to me, i guess."
mine seems to be working fine, except the weather thing.
shows
in the About section my phone reads
WM 6.1 Pro
CE OS 5.2.21041
Device Information reads
ROM version 1.05.Alltel
Radio version 3.42.30
PRL Version 30008
PRI version 2.02_011
I was kinda scared to do another hard reset b/c I had already changed a bunch of settings.
Sorry if this doesn't help you too much,
but it is nice to know I'm not the only one with this issue
.
Hmm sounds like a similar problem. But I thought it wasn't unlocked unless we saw 2.31.coke somewhere in the device information.
As far as I know, hard reset did not hurt the phone. I tried installing that unlocker 4 times then went with the original HTC rom and it still turned out just like before. It installed the rom fine
Yeah I am still concerned about how it wont go through the exitbl step...
moonwoo said:
Hey guys I know this is not the unlocking thread but I tried posting on the thread made by "coke" with no response. So I thought I'd do it here. So here's the story
I have a Sprint Vogue and I was really getting tired of the slow HTC WM 6.1 and all the buttons that I could not modify on the cube (which is useless cuz I dont use any of the them). So I decided to try out a new rom with 6.1 and touchflo 2D.
I went to the ppcgeeks forum to unlock the phone, followed the instructions, read and reread the posts. Finally decided to give it a go. Everything went smoothly until the last step (exitbl) of coke 2.31. It kept telling me to disable USB on activesync and then the program would just shut down! ?? And yes I did disable the USB option for the activesync before that step. I looked under the device information and realized that nothing has changed interms of the ROM. So I tried it again and again (4 times). Then I just reinstalled the HTC 6.1 rom with the 3.42.30 radio... So any ideas on why this may be happening? I promise I followed all the steps
My second question is, in your opinions, what is the most reliable, stable and fast Touch 6.1 rom? Let me know if you have an opinion.
Thanks so much in advance, any help would be appreciated.
Click to expand...
Click to collapse
Yeah, the directions can be a bit confusing over there on that thread
Basically here are the steps
Download the 2.31 unlocker
Download the ROM you want to use (my personal preference is this one for a TF2D style or this one for a WinMO 6.5 style interface that has TF2D included to switch back and for - both very stable, fast and clean and the thread is very active for help (especially if your on Verizon or Bell which can have issues)
from there, use WinRAR to extract each file into separate folders
then Put your phone in bootloader mode (press and hold power+camera+stylus in reset until 3-color screen comes up)
At this point at the bottom of the screen it will say Serial, plug it into the USB cable or cradle and it should change to USB
Start the exe in the 2.31 and follow the directions (you may get some errors about sleep4.exe just click on OK as it keeps occuring its a XP/Windows7 64 bit issue if that is what your using)
At the point where it tell you to disconect, unplug the phone from the USB cable and wait (count to 10 or something) then plug it back in, it should have went from USB to SERIAL and now back to USB at that point go ahead and hit any key on your PC and it should continue along
once complete, reboot, allow it to do its thing then reboot and go back into bootloader again during reboot you should see coke 2.31 in the upper left if so your ready to go
plug it into your USB/Cradle again and then go into the ROM folder you extracted the ROM into
Once the screen on your phone says USB again go to the folder and double click on the RomUpdateUtility.exe file and follow the directions again, it may take some time so be paitent
once the phone flashes and reboots, let it run and do its thing to the and reboot itself then (and here is an important step for stability) once it starts up do a hard reset (red+green+stylus in reset hole) hit the enter button (center of D-Pad) it will reflash the phone and then red key (send) when prompted
then go thought the setup again, this time you can actually set things up as your keeping them this time and once things are done and your at the start screen on your phone power off (not reset) the phone and then start it up again - seems doing it this way takes care of alot of little issues that will come up before they can happen
Depending on your carrier be sure to have one of the DCD Carrier Cabs as well especially for the 6.5 ROM as it is a generic ROM and some have reported needing to run the DCD Carrier Cab for the service they use to get on the internet and use GPS and the like
Hope that clears up things a bit LOL
Detroit Doug
Doug, when I go into the bootloader it DOES say SPL-2.31.Coke. Does that mean that it is all set? Also this time, it still asked me to disable active sync at this time (at the exitbl step) do you have to run that step to complete the unlock?
This is what my bootloader image says
VOGU100 NFG
SPL-2.31.CoKe
CPLD-3
Let me know if I need to run the exitbl or if I am set to load the rom. Thanks so much for your help!
moonwoo said:
Doug, when I go into the bootloader it DOES say SPL-2.31.Coke. Does that mean that it is all set? Also this time, it still asked me to disable active sync at this time (at the exitbl step) do you have to run that step to complete the unlock?
This is what my bootloader image says
VOGU100 NFG
SPL-2.31.CoKe
CPLD-3
Let me know if I need to run the exitbl or if I am set to load the rom. Thanks so much for your help!
Click to expand...
Click to collapse
Your all set to flash if in bootloader it says as your phone does SPL-2.31.CoKe
you all unlocked and ready to go ... just put your phone in bootloader mode then connect the phone to your PC "serial" will change to "USB" and then run the RomUpdateUtility.exe file and follow along with the bouncing ball, do the watusi, wipe hands on pants - whatever helps you pass the time
but follow the steps as outlined above with the hard-resets and power-offs and the like, believe me its better to solve the issues before they occur than wait and have to start over
Detroit Doug
Doug, it worked like a charm. I did not know that the last step of the unlocker was not required. I installed 6.1 with Touchflo 2D. Looks and feels .. wow. it's the coolest thing I've seen. I've followed all your step including a hard reset before I started using it. So far the speed is impressive.
Couple more questions for you since you are an expert at this.
1. If I reload the factory default ROM, will it reset everything back to normal and can I keep reverting back and forth between different ROMs without any consequences?
2. It (the NFSFAN's 6.1 rom) seems to use less Storage memory (137 free vs HTC's ~100 free) but much more Program memory (59 free vs. ~80 in HTC's) than the HTC default. Any ideas or concerns about this?
All in all thanks so much! Hopefully as I learn more and more I will be able to contribute things too. You are right. This is so cool and highly addictive!!
Take care~ BTW I am in Lansing Go State!
moonwoo said:
Doug, it worked like a charm. I did not know that the last step of the unlocker was not required. I installed 6.1 with Touchflo 2D. Looks and feels .. wow. it's the coolest thing I've seen. I've followed all your step including a hard reset before I started using it. So far the speed is impressive.
Couple more questions for you since you are an expert at this.
1. If I reload the factory default ROM, will it reset everything back to normal and can I keep reverting back and forth between different ROMs without any consequences?
2. It (the NFSFAN's 6.1 rom) seems to use less Storage memory (137 free vs HTC's ~100 free) but much more Program memory (59 free vs. ~80 in HTC's) than the HTC default. Any ideas or concerns about this?
All in all thanks so much! Hopefully as I learn more and more I will be able to contribute things too. You are right. This is so cool and highly addictive!!
Take care~ BTW I am in Lansing Go State!
Click to expand...
Click to collapse
Glad it worked, and Ill try to answer you concerns
1 -Now that it is unlocked go ahead and swap ROMs all you want to, the tricky part is the stock ROM, flashing back to stock can and will revert your radio (if youve upgraded it) and ca cause issues with the unlocker, but a simple run of the unlocker 2.31 again can correct it
2 - NFSFAN like other Chefs have ways of moving data/programs around when they cook up these ROMs utilizing whatever kitchen program they personally prefer that being the case how they data/programs get pushed about can create the speediness you now see in your phone by freeing up the RAM for apps and the like and pushing programs off to the side optimizing how the device should have been setup from the start
As for that, Ive been using his ROMs as well as some others for quite some time and have had little to no issues with how he places the progs and data so I wouldnt worry about it
Yeah, Live in Las Vegas now - but Michigan will ALWAYS be home Go Red Wings !!!!
Detroit Doug
Thanks Doug, for all your information. Your answers were great! Hopefully I wont need too much more help in the future. i'm learning~
Don't mean to go off on a little tangent, but I find this post really helpful and was wondering if you, Doug, or someone else could provide a link to this 2.31 unlocker or whatever it is. Thanks in advance.
hibbiejibbie3 said:
Don't mean to go off on a little tangent, but I find this post really helpful and was wondering if you, Doug, or someone else could provide a link to this 2.31 unlocker or whatever it is. Thanks in advance.
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/showthread.php?t=20370
Detroit Doug
Having trouble unlocking my xv6900. I'm using 2.31 unlocker. I have the phone in bootloader mode and when I connect the usb it goes from serial to usb. I run the RUU from the unlockers self extracted folder but it get an error message. I'm pretty positive its just something im not doing correctly. Any help appreciated.
Another thing I noticed the RUU will not detect my current version if I am in bootloder mode. If I run the RUU with active sync on it will detect my current version but when it puts my phone into bootloader mode to update it, it disconnects my active sync connection.
Reddog80p said:
Having trouble unlocking my xv6900. I'm using 2.31 unlocker. I have the phone in bootloader mode and when I connect the usb it goes from serial to usb. I run the RUU from the unlockers self extracted folder but it get an error message. I'm pretty positive its just something im not doing correctly. Any help appreciated.
Another thing I noticed the RUU will not detect my current version if I am in bootloder mode. If I run the RUU with active sync on it will detect my current version but when it puts my phone into bootloader mode to update it, it disconnects my active sync connection.
Click to expand...
Click to collapse
Check your PM over at PPCGeeks
Detroit Doug
Reddog80p said:
Having trouble unlocking my xv6900. I'm using 2.31 unlocker. I have the phone in bootloader mode and when I connect the usb it goes from serial to usb. I run the RUU from the unlockers self extracted folder but it get an error message. I'm pretty positive its just something im not doing correctly. Any help appreciated.
Another thing I noticed the RUU will not detect my current version if I am in bootloder mode. If I run the RUU with active sync on it will detect my current version but when it puts my phone into bootloader mode to update it, it disconnects my active sync connection.
Click to expand...
Click to collapse
From Detroit_Doug
At the point where it tell you to disconnect, unplug the phone from the USB cable and wait (count to 10 or something) then plug it back in, it should have went from USB to SERIAL and now back to USB at that point go ahead and hit any key on your PC and it should continue along
Maybe wait longer if you can,
I reckon some pc take longer to fully recognize[process] the disconnect and reconnect procedure.
example: disconnect > wait 20-30 seconds > reconnect > wait 20-30 seconds > then continue
I had that same issue and waiting longer during this process helped
.
I can't even get to that point. With active sync on as soon as I start the unlocker RUU it gets the info from my phone and shows the current rom 3.14.605.1 ....I click update and it shows 2.31 unlocker I hit next and then the install status bar comes up on my desktop and my phone goes into bootloader mode and the active sync connection drops and I get the 262 connection error. If I start the RUU with my phone in bootloader usb mode already it does not detect my current rom and I click next. click next to 2.31 unlocker, and it goes through the same steps and I get the same error. Is there anything I have to do to my phone prior to running the RUU. My phone is a verizon xv6900 running wm 6.1 rom 3.14.605.1 with radio 3.37.78
I have the same problem with my new sprint touch. I get error 262 at 0%, did they change something in these new phone that won't allow us to unlock?
Rom is 3.03.651.4
radio 3.42.30
I think I got it, what I did was not to extract the vogue_unlocker_MFG_2.31.exe file but to run it. I had activesync set up and connected, then just ran the unlocker, don't extract it. It will shut off activesnyc and put my phone in to the 3 color screen, form there, just follow the directions. Also I didn't have to run the exitbl step as my phone auttomatically exit and restarted.
I ended up having to re-run the .041 unlocker and then the 2.31 unlocker and it ended up working for me. I'm not sure why I had to because I Had the same bootloader info prior to running the 2.31 unlocker in the first place. The 6.5 rom and gps rom has been working flawlessly for a week now, the only thing I had to do was call up VZW (*8889) the guy answered "account investigations" LOL I told him I had to hard reset and my phone wouldn't authenticate and he asked me to call back from another line. I told him that I had no landline and he said thats fine I can override it just call back right away whenever you get to another phone. That was on friday and I have not called back but I've been able to text, make and receive calls so I don't think I will unless I have to.
gooney said:
I think I got it, what I did was not to extract the vogue_unlocker_MFG_2.31.exe file but to run it. I had activesync set up and connected, then just ran the unlocker, don't extract it. It will shut off activesnyc and put my phone in to the 3 color screen, form there, just follow the directions. Also I didn't have to run the exitbl step as my phone auttomatically exit and restarted.
Click to expand...
Click to collapse
thank you! i did that and it worked for me.
yeah, it says right in the directions over there to just run the exe it will create a temp folder and run the RUU itself from there
Extracting it and running it will always cause issues
also - Ignore the sleep4.exe or whatever if you encounter it - it is a legacy exe that is called that isnt used anymore, wont affect the unlocking just hit OK through it
Detroit Doug
I have been running the running NFSFAN's 6.5 rom and have flashed between stock and custom a number of times with no issues. I am trying to flash back to the stock sprint 6.1 rom using the .exe that i downloaded from htc's website and i get error 328 "This update utility cannot be used for your PDA Phone. Please check your update utility." This is the exact same file and process that I used to flash to 6.1 rom not 30 minutes ago. I have to take my phone into the store due to a faulty usb jack (loses connection when i jiggle it) and I need the stock rom on it. Ideas? Is there a .nbh for the stock rom that I can use to flash from my microsd card from?
mrono said:
I have been running the running NFSFAN's 6.5 rom and have flashed between stock and custom a number of times with no issues. I am trying to flash back to the stock sprint 6.1 rom using the .exe that i downloaded from htc's website and i get error 328 "This update utility cannot be used for your PDA Phone. Please check your update utility." This is the exact same file and process that I used to flash to 6.1 rom not 30 minutes ago. I have to take my phone into the store due to a faulty usb jack (loses connection when i jiggle it) and I need the stock rom on it. Ideas? Is there a .nbh for the stock rom that I can use to flash from my microsd card from?
Click to expand...
Click to collapse
You must do it from the Coke menu by pressing camera key + top (screen key) + pressing reset button with the stylus = Coke Menu... From there just downgrade without any problems, just did it myself because had some problems with 6.5 resetting all the time for no particular reason. I have android as a backup.
Enjoy, hope this works for you.
prodigy2m said:
You must do it from the Coke menu by pressing camera key + top (screen key) + pressing reset button with the stylus = Coke Menu... From there just downgrade without any problems, just did it myself because had some problems with 6.5 resetting all the time for no particular reason. I have android as a backup.
Enjoy, hope this works for you.
Click to expand...
Click to collapse
Menu? i'm afraid all i get is the coke screen with no options, if your talking about the act of downgrading from the card I can do that, i just simply do not have the .nbh file to place on the memory card to downgrade from.
ugh, i rebooted and now it works. Regardless, is there a .nbh avaliable for the sprint stock rom?
mrono said:
Menu? i'm afraid all i get is the coke screen with no options, if your talking about the act of downgrading from the card I can do that, i just simply do not have the .nbh file to place on the memory card to downgrade from.
Click to expand...
Click to collapse
What he meant was bootloader mode (power+camera+stylus)
then plug in the usb cable and launch the sprint rom update. I flash every ROM that way.
To get the NBH, this is what I did.
For me, when I downloaded stock Bell ROM, I got an exe titled "RUU_Vogue_BM_WWE_1.19.666.1_1.59.10a_BM_NV133_PRL31398_Ship.exe"
All i did was extract the exe using WinRAR and I had the nbh.
Hope this helps
Hey there,
After lots of problems with my P3300 (see this thread), I've decided to flash it to see if that helps. I'm not too bothered about getting the GSM working again as I have another phone, but I'd like to be able to run all apps again.
So... I'd like some advice please.
What would be the best ROM for me to use if I just want to use the phone as a GPS device, portable wifi web browser and notepad?
Basically something pretty stripped down with as good battery life as possible.
Is there any advantage with going for WM6 over WM5?
Bear in mind I've never done this before and am currently reading up on all of it.
From what I've read so far I'll have to do the CID unlock first (currently have WM5 in french installed and would like an english ROM)? I think it may be unlocked already but am not sure. Is there a way to check? Do I risk anything if I run USPL even though the phone is already unlocked?
Thanks in advance for any advice!
You can check if your phone is CID unlocked if the SPL number which comes up while booting during the big white HTC screen says 1.11.0000. If it says anything other than that then it's not unlocked.
Best stripped rom for me is Sheen's clean base version 3. Check it out, it's on the first page of the thread.
alternatively, if u want fast and stripped, go for yues extraclean (see my signature)
greetz
ferfecir Clean
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
mta33 said:
This is the best clean rom which is a modified version of Yues clean with 30mb free ram.
http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
Click to expand...
Click to collapse
Pagepool 4 MB
RAM 32 MB
ROM 69 MB
Thanks for the replies. My SPL says 1.12.0000 so I guess I need to do the CID unlock.
Ferfecir Build 20931 looks like the most promising from those.
Can anyone please point me to a good tutorial for flashing the ROM via activesync? I'd rather not have to format the memory card if I can avoid it and my soft reset button is broken. (I have serached but had no luck)
Thanks!
download uspl from here http://forum.xda-developers.com/showthread.php?t=311403
and any rom you want...
unpack the uspl
plug the cable in the device and establish a usb connection
run the "start_uspl.exe" be patient...after being prompted to click some "next buttons" follow the procedure...and i mean it...follow the procedure...that with 50% battery,no programs running on the pc,no unplugging the cable and so on...
and you will have the uspl flashed
go to boot loader...The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
if uspl says 1.11.000 then you are good to go
now you can flash any rom (cooked for artemis) and any artemis radio (i recommend you the 3.34.90.) onto your artemis
simply download,extract,run the rom update utility (RUU) ,follow the procedure and watch the show...
if you ever get an error during flash or anywhere else in the rom update utility...refer to this page and troubleshoot your troubles http://wiki.xda-developers.com/index.php?pagename=RUU_Errors
if you get an error saying invalid file size or something like that (you will get it if you try eg this rom..http://forum.xda-developers.com/showthread.php?t=465291)
go to this thread http://forum.xda-developers.com/showthread.php?t=521406 download the file and flash it if it is an ordinary rom...just run the RUU
afterwards just check it in the bootloader if it says 1.11.cmon it is ok....and you will be able to flash virtually any rom cooked for artemis onto yours
i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not
Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.
this is a very open-ended question.
Everyone on here will have their own favourite rom....if there was 1 definate fits-all "best" rom ...everyone would be using it..but there isnt and we are all using the rom that suits us best
some people want their phone to be more like an iPod and so the multimedia aspect is a priority along with decent graphics and animated menus
some people want the PDA functionality most so they want a really stripped-down fast rom that is reliable and handles email well
everyone wants to use it their own way....thats why this site exists.
The guys who make these ROMS are the guys who say "this is good, but i want it to be more like THIS."
Follow farukb's (excellent) instructions....unlock your device properly....if you get any problems, search for the answer before asking for help....chances are hundreds of people will have had the same problem and hundreds of people will have already given the answer...and then ....just look around the site. See which roms are available that fit YOUR needs, and flash it....if you dont like it, try another.
I'm trying 6.5 roms at the moment and love it....i've flashed it probably once a week with a new ROM each time a new version is released and have seen the OS evolve....right now i'd say PDhee's Mega 6.5 M2D rom is the best of the bunch providing you're not planning on installing LOTS of exra programs.
that's the beauty of these things, if you dont like the ROM, just try another. Sometimes the ROM won't work quite right (especially if flashing ROMs between different cooks) so just try flashing it again to make sure it resets everythin correctly. If it's still not right, try a different ROM.
farukb said:
i must be damn crazy to post this thing...because it is all there in the wiki and the forum stickies,believe it or not
Click to expand...
Click to collapse
yeah, unfortunately (and it seems to have increased over the last year or so) nost people on here are noobs who can't be bothered to read through some threads or use the search and we just get the same questions asked constantly.
I dont minds helping people....providing they've looked for the answer themselves first.
every time a new rom is released there will be people asking what error 260 or 270 means?, do they need to USPL? etc etc
it's easier to ask someone else to take time out of their day to aswer your question than just type "error 260" into the search box and find out for yourself. They dont consider that people are having to answer these questions 10 times a week, in their own time, for no thanks, just to have the same question asked the next day. Purely becuase they couldn't be bothered to see if anyone else has asked that question before.
sorry...rant over....i love you all
seebasso said:
Thank you very much for the detailed instructions.
Just two more questions!
My reset button is broken. Can I just turn the phone off and back on to check if I have 1.11.0000 instead of using the bootloader?
And the RUU is this one? http://code.google.com/p/htc-flasher/downloads/list (only file I have for the new Ferfecir ROM is a .nbh, is that all I need?)
Thanks again.
Click to expand...
Click to collapse
no
you need to use the reset button (stick the stylus in the reset hole) .
Reset is like turning your computer off and on again
Power button is like turning the monitor off....it doesnt stop programs running and it doesnt properly reboot the device.
Your only alternative is taking the batter out i think (just like pulling the plug out will also reboot your computer).
If you havent already run USPL, then you probably WILL need to do it.
i dont know the specific ROM you're talking about, but just an NBH file will NOT work. You need the EXE file to run it.
Just download any suitable ROM off this site and it will have the whole package....if you're downloading from another site you'll have to ak that other site for help
my reset button doesn't work. i took the phone apart to change the touchscreen and must have misaligned something when putting it back together. sticking the stylus in the hole doesn't do anything anymore. will take the battery out instead, thanks.
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum and the wiki etc! i appreciate it's annoying answering the same noob questions over and over again but i thought my thread was specific enough to warrant it and am grateful for all the replies.
seebasso said:
regarding the rom, it is one i downloaded from here: http://forum.xda-developers.com/showthread.php?t=531972&highlight=ferfecir
the rar file downloaded from 4share (http://www.4shared.com/file/112067347/72728603/ARTEIMG-Ferfecir_-_20931_en_gncel_hali.html) only contains the nbh, no exe.
and for the record, i've spent all afternoon/evening researching this, searching this forum .....
Click to expand...
Click to collapse
...yeah, and if you read ferfercirs description fully, you will come past "sd-card-flashing" which is the way to flash the *.nbh -part of your rom in a way without needing an activesync connecton
greetz
i did read that bit
but as mentioned a couple of times in this thread already, my reset button is not operational so i cannot use bootloader (afaik). so i assumed there was another way.
but i guess i'll find a rom that comes an an exe and save myself some trouble
no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz
ok thank you once again, i'll try it tonight.
one final question! do i need to have a sim card inserted while running USPL or does it not matter?
It is recommended to remove both your SIM card and your MicroSD card during any type of flashing, whether it be USPL or ROM. Even my reset button is not working anymore, my phone got dropped in water and I had to give it for repairs. After motherboard change they assembled it slightly wrong I guess, and it doesn't work. But I can still get into bootloader by just pressing the Voice record and power buttons together for 10 seconds. Try that.
Secondly, I hate to be plugging myself here, but I have just cooked a clean 6.1 ROM myself, with the latest build of 6.1 that is 21054. you might want to check that out, it comes with the full package and not just the nbh
here it is - (http://forum.xda-developers.com/showthread.php?t=551728)
Again, sorry, but Im giving you an option thats all
thormdac said:
no need to keep searching,
u can simple take the provided *.nbh file that came without an exe, rename it to ruu_signed.nbh, exchange the existing RUU from a complete installer-routine and off u go, provided u have used uspl first
greetz
Click to expand...
Click to collapse
ok i need help again sorry! i tried this but i got an error after 5% saying the .nbh was an invalid size
i used the ROMUpdateUtility.exe from Arte_WM65_23009_M2D_Mega_beta1 ROM (i removed Arte_WM65_23009_Mega_b1.nbh from the folder and replaced it with Ferfecir's .nbh which I had renamed to ruu_signed.nbh)
What did I do wrong?
I ended up flashing with Arte_WM65_23009_Mega_b1.nbh and it worked great but that ROM is too much for me and I want Ferfecir's simpler one.
Thanks
You need to flash the newer USPL which allows nbh files of a smaller size to be flashed.
thanks! it worked. everything working perfectly and my gsm works again too. woohoo.
Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.
Did you hardSPL? If not go here: HardSPL
Nothing
I DL'ed the fle and followed directions (auto option). Nothing happened.
bigdaddy67 said:
I DL'ed the fle and followed directions (auto option). Nothing happened.
Click to expand...
Click to collapse
When you read those 11 steps in the HSPL thread, where is it, where you say: nothing happends?
As it stands, you will only be able to install an official T-Mobile ROM if it is a T-Mobile-branded phone.
So installing HardSPL will let you flash whatever ROM you want, any of the official ones (including, say, HTC official 6.5), or one of the fine cooked ones from this forum.
If you are having trouble with HardSPL, you really need to post on that in the HardSPL sticky.
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
@bigdaddy67
This sounds like a USB issue, try this:
1. Power off your TP2
2. Press and HOLD the volume down button, press and HOLD power button until you see the multi-coloured screen (bootloader mode)
3. Connect your TP2 to your computer via USB
4. You should now see the letters USB at the bottom of the TP2 screen
5. If you DO, run hardSPL
If you DON'T, try a different USB cable and/or port on your computer.
If none of the above helps, take a screen shot of your bootloader screen and post it.
How to get a screenshot:
1. Go to http://www.mymobiler.com and download/install the software.
2. Open it and take a screen shot
3. Post it here.
We are here to help, but need some additional details!!!
Russ
bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
normally I would tell you to go search but you seem to be in a pickle so here...
Russ
bigdaddy67 said:
Please save sarcasm when responding. I have been reading and would onlt ask for help a last option.
My phone - HTC Pro 2 (I bought it from a authorized t-mobile store)
Need help with - ugrading it to 6.5 or any cooked version that will work
History - my phone is already unlocked as I had unlock kings do it. I tested it and I can put any sim it and it works fine.
Problem - every time I try and install a new rom on it I get one the follwing errors or issues: My usb connection stop when the install starts and the process times out, or I get a host of errors messeges from invild device to wrong version.
I need very simple instructions on what I need to do upgrade my os and then later migrate to some of the really roms I have seen on this site.
Please help.
Click to expand...
Click to collapse
Welcome to forums
Hope this guide help you:
http://forum.xda-developers.com/showthread.php?t=550540
And don´t forget to vote!
bigdaddy67 said:
no matter what I do, the connection always times out. It seems my phone will not allow anything rom software to be installed. Where can I find enableapnew.cab? The rom software told me i needed that.
Click to expand...
Click to collapse
Also, which OS are you running on your PC? If its Windows XP, make sure you download Active Sync and install/run it. If you run Vista / 7, make sure you run the Mobile Device Center.
moved you're thread out of rom dev section, best of luck sir.
Update -
My OS is win xp and copied and installed the cab on my device. then I re-powered hold down the volume and got that tri-color screen with the usb connected. Started the HardSP app and have been waiting for 15 minutes as nothing seems to be working.
Did I miss something?
Got error 262
Ok I finally got an 262 error. I am not what I missed. Dl'ed the cab re-powered holding down vol key started HardSp app.
Help.
Stil need help
I am at home and my pc is vista. Can someone pls help get over this hurdle?
Please Please Please
Hi all, for all the people like me who do not have the patience or knowledge do adventure themselves in the mitty thread.
This program already exists for X1, HD2, TP2 (for what I know) and I have tested it and it works.
After some search on this forum I have talked to agent_47, who was kind enough to make a task29 program for our HTC Diamonds (GSM version).
Agent_47 or me do not take any responsibility for ay damage done to your device. Use it at your own risk, and only after you have HSPL already installed on your device.
Do not know what a HSPL is, check here:
http://forum.xda-developers.com/showthread.php?t=415191
agent_47 said:
it will flash radio 1.09.25.23
replace the radio if u want to use other version
Click to expand...
Click to collapse
agent_47 said:
now we can mtty our "HTC Diamond" without having the need of MTTY and its drivers
INSTRUCTIONS:
- download and unzip
- run then ROMUpdateUtility.exe and wait for it to finish.....
- device will reboot but will neva go past the bootscreen coz there is no OS to boot
- take our batti and then flash a rom using mSD card or by taking device into bootloader and using customRUU to load ur favorite ROM
DOWNLOAD:
http://rs604.rapidshare.com/files/407049148/task29-diamond.7z
WHATS TASK29\MTTY
when u flash a rom, you are copying files onto the internal memory (like duh!) but if u repeatadly flash different roms, sometimes files from older version stays behind as when u flash a rom, you just copy and sometimes overwrite files without deleting the older ones. hence at times these older files may create bugs\instability. hardrest donot always fix it.so we use MTTY
but the thing is, mtty is and can be hard to use for new users. ... for me,, i was having the worst time installin the drivers needed to run mtty on win7 x64. so u i made this tool for me and for all
CREDIT:
all credit goes to doloop for coming up with the idea
Click to expand...
Click to collapse
and I would add to agent_47, as he adapted this tool for the HTC Diamond
Did anyone tried this?
What's the verdict?
mmm. interesting.
Thanks for the share and all your hard work but this is actually harder than mitty for me and i am a windows 7 user also
wapvirus said:
Thanks for the share and all your hard work but this is actually harder than mitty for me and i am a windows 7 user also
Click to expand...
Click to collapse
I do not understand how this is possible, I am using Vista and this is as easy as flashing a ROM with a computer. You just connect the device via USB to the Diamond, let active sync finish. Then you just need to run "ROMUpdateUtility.exe" and follow the instructions.
I have tested this, and I can confirm this is working for the European HTC Diamond (bought in Portugal).
This was not made by me, but I do think that more people will benefit with this program. Hopefully people will overcome the initial resistance to change.
Great idea!
I used to MTTY through VMWare Windows XP x86 within my host Windows 7 x64. It was a pain in the ass to get though but it always worked for me. This is a great time saver!
Regards to both of you Johev and agent_47!
Willing to test on my next flash.
Best regards,
Cina.
INSTRUCTIONS:
- take our batti and then flash a rom using mSD cardor by taking device into bootloader and using customRUU to load ur favorite ROM
Click to expand...
Click to collapse
What do you mean? take out battery?
Gonna try this with my next flash
Yeah, the sentence is a bit odd to me to
i asume it means take out battery but still..
i'm not gonna try it until i know it for sure!
--edit--
i couldn't help it and used it anyway..
i assumed "take our batti" means take out battery cuz it worked for me!
my diamond was clean (i guess) and i'm now enjoying a new rom!
Thanx guys!!
I would never post something that I did not test first.
I am glad that you liked it, and I really think it is much simpler then the mitty thread.
Good luck flashing.
rapidshare
first would like to give thanks for sharing this one but some people cannot use rapidshare links and unluckily I am those few
can you give alternative link like mediafire ????
character said:
first would like to give thanks for sharing this one but some people cannot use rapidshare links and unluckily I am those few
can you give alternative link like mediafire ????
Click to expand...
Click to collapse
http://www.mediafire.com/?jabdu2n968xa9uk here you are
I LOVE THIS TOOL
this isn't good for my ORD.. i'm flashing the hell out of my diamond now!
Getting a HD2 in about a month.. can't wait for it ;D
I tried it, but I only get the start screen with "Touch diamond", no bootloader.
But I´ve installed HARDSPL Olinex, because I already flashed other ROM´s.
How can I solve this problem?
What about battery? When I have to get it out, when I can put it in again...?
fibula
to get into bootloader you have to reset your device while holding the volume down button!
then you will get the tri-color screen,
connect your diamond to your pc and flash a rom with a RUU!
fibula said:
I tried it, but I only get the start screen with "Touch diamond", no bootloader.
But I´ve installed HARDSPL Olinex, because I already flashed other ROM´s.
How can I solve this problem?
What about battery? When I have to get it out, when I can put it in again...?
fibula
Click to expand...
Click to collapse
To get into bootloader with my diamond:
1) Turn Diamond off, take out battery for 5 seconds.
2) Put battery back inside, and press and hold the centre button (circle) and turn ON the device (hold both buttons) until you see a 3 colour screen
If step 2 does not work, try pressing holding volume down while turning the device on (hold the ON button too). Remember to take out the battery before you do this.
Hope this helps.
Hi!
Does this work by simply copying any ROM's nbh file (instead of radio*.nbg) to folder and executing ROMUpdateUtility.exe? Will it MTTY before flashing the ROM?
Currently I'm trying this method out. It is around at 50% of flashing progress.
I'll report back.
Cina.
thanks a ton dude.... magnificent work...
Now if there were only a way to do it directly from Internal Storage, without RUU...
It does not work the way I described. It hangs on HTC Diamond black boot screen and no red lines appears in lower right corner (no OS recognized).
So you have to flash 2 times. Radio flash is shorted for the first attempt and on the second turn you flash your ROM with CustomRUU.
There is a similiar tool like this with the method working with other devices I described above. FlashaholicRUU. Someone give it a try for Diamond. Next week I'll do it and report back.
Cheers,
Cina.
cina said:
It does not work the way I described. It hangs on HTC Diamond black boot screen and no red lines appears in lower right corner (no OS recognized).
So you have to flash 2 times. Radio flash is shorted for the first attempt and on the second turn you flash your ROM with CustomRUU.
There is a similiar tool like this with the method working with other devices I described above. FlashaholicRUU. Someone give it a try for Diamond. Next week I'll do it and report back.
Cheers,
Cina.
Click to expand...
Click to collapse
I remember to see that post on xda developers front page short time ago, but I was not sure if it would work for HTC Diamond.
A universal task29 that would format and flash the device in one single process.
Ironically it was developed a few weeks after I have found an alternative way to mitty that I posted here.
So far I did not hear that it was compatible with Diamond, so I will not risk it.
It's nice to have all these options, because when I searched for something like this a few months ago, I could only find the mitty threat that has more than 80 posts.
For me it was strange as newer devices with very similar hardware and software already had something like this, but Diamond users had to use mitty.
Well I am glad that you like it, and hopefully I helped someone that was not able or willing to do it manually.