Hi all -
I bought a HTC Touch Pro 3-in-1 Synch & Charge Stereo Audio 3.5mm adapter w/ microphone, hoping I can be able to use it while listening to MP3 music while charging my phone and capable of picking up calls in my car.
This is the item I bought: http://www.pdaextreme.com/2750.html
I noticed that everytime I use it, I would be able to listen to music for a short while then all of a sudden the Voice Speed Dial would go off or it would make calls repeatedly then I would unplug it and it would stop.
Can anyone tell me why this is happening and what I can do to prevent it from going off? It's really strange, I suspect that there some kind of shortcircuit in the adapter. Need help.
Thanks in advance,
elfnet
I know what you mean, i have a similar setup and specially when im listening to internet radio on skyfire or music on S2P it goes crazy and i have to unplug, for the voice dialer i disable it, just go on the options. but for the redial of the last number i have no clue on how to stop it. I hope someone here has a good solution to our problem!
Related
Hi everybody,
Hope that someone can help me here with the following:
On my motorbike I have an (Starcom1) motor intercom.
I can speak to the passenger, listen to navigation, listen to music and talk to another motorbike. All fine.
Now I use (of course) WM6 devices. Currently the HTC Cruise.
Before I had it set up via my Garmin Navigator, phone rings, number appears on screen and I can decide to pickup or not.
Problem was that on short rides, it is too much hassle to put the navigator on all the time and I hoped to find a better way to still recieve phonecalls.
SO I paired my phone straight to the Bluetooth box on my Starcom.
The problem is that, according to Starcom, my phone needs to be in autoanswerring mode to be able to use it.
Of course this works but is not exactly what I have in mind. Now it is on autoanswer alll the time or I have to go through long menu's to switch it on and off, if I get away from the bike.
I see two options but have not found a solution:
There is some kind of 'connecting' profile system thats switches to autoanswer when it detects a BT headset or special device.
Use voice commands but I have found I always need to press the button to be able to use this. Would there be a method to answer a call without touching the phone in my pocket?
Please give me your thoughts and suggestions.
With headphones attached I am unable to receive calls. Caller will get a fast busy, I am also unable to make calls. Sux as I have phone in car listen to slacker then unable to listen to call via stereo or even receive the call.
anyone else having this issue? Is there a fix? Tried searching didn't come up with anything.
Thanks.
-M
I don't have this problem.
Radio problem maybe?
Well my problem is that i can hear music when plugged into my car radio, i can hear the person calling me but he/she can't hear me, it is like when you plug in the headphones/earpiece (or jack to jack cable) the microphone gets cut off.
I have a doubt on the latest radio I flashed. Maybe I should get back to an older radio to see if the problem is fixed.
Will update as soon as I can
mgayda said:
With headphones attached I am unable to receive calls. Caller will get a fast busy, I am also unable to make calls. Sux as I have phone in car listen to slacker then unable to listen to call via stereo or even receive the call.
anyone else having this issue? Is there a fix? Tried searching didn't come up with anything.
Thanks.
-M
Click to expand...
Click to collapse
i was NOW about to make a thread stating this EXACT same issue...whenever i try making a call with my headphones plugged in, i get a network error. and if someone tries callin me while my headphones r plugged in, it goes straight to voicemail but it works fine thru bluetooth and a side issue(not sure if this is posted already) the multitouch only works horizontally and while the phone is in portrait view can anyone help?
I'm seeing the same issue. With headphones plugged in I cannot make or receive phone calls. Outbound is network error, inbound fails as well.
I have tried with regular headphones (stereo... three connector) and with headphones w/Mic (4 connectors).
Are you guys all HD2 users?
if so, have you tried a different ROM?
If this is an HD2 specific issue then it would probably get a better response in the HD2 section..........
Hey guys, so the glitch in the OEM T-Mobile G2 rom, with the bluetooth music not working after a bluetooth call, has really got to me. I've been messing with Tasker for a while now trying to make a profile where it turns the bluetooth off and then on after a bluetooth call. Simple as that. But I can't seem to make it work. I don't want any auto-answer stuff, and I want it to do nothing if I decline or miss the call, because the music isn't affected after either of these events. Can you guys please give me an outline of the profiles, states, events, tasks, etc. that I need to create in order to make this work? I'm using the "Tasker" program. It would be nice if I can get it to connect to my bluetooth stereo headset after as well, because it usually takes a while if you just let it sit there. And then to automatically start the music again after the connection has been established. If not, just the off/on would be ok, cause if I press the play key on the bluetooth headset, it connects to the phone and starts to play the music. I just need to press it like 3 times, because for some reason the first time it always starts playing through the speaker. Any help will be greatly appreciated.
any ideas? Its possible, right?
Hey all
I have had a lot of trouble with my Galaxy's bluetooth connecting with the system in my Infiniti M37x
I now am able to have it so everytime I get into my car, the phone's "phone" bluetooth connects automatically, I can use the hands free system to make and receive calls AND the phonebook is downloaded into the system as well. Works just GREAT! I can talk on the phone and I have my contacts there. All hands free.
But......
that is only if I pair it to the phone part of the Galaxy.
If I also pair it to the audio device, then the troubles begin.
If I were to pair the audio to my car, the music sounds great...but once I turn off the car and leave, come back, the car won't recognize the phone part. Even if I go to BLUETOOTH settings, and click the little button, it won't stay or connect to my car.
This worked great with my EVO using Gingerbread.
Is this an ICS thing?
Are there any apps that would allow me to just leave the phone as the default car connection and if I want to listen to music, just click something to switch it over to audio part?
Whenever pair to the audio and I use the audio bluetooth connection, I have to unpair and start all over to get the phone to connect.
Hopefully this makes sense. Any advice would be helpful.
Mike
This is a Samsung thing (and I hate their phones because of this)
To have this function correctly, you need to enter car dock mode. To enter car dock mode, you need a samsung car dock.
If my phone is docked, I can stream music, receive calls, etc, all work great.
If I leave it in my pocket and I stream music and receive a call, the audio comes through the phone, and not through bluetooth.
My E4GT was like this. I opened an issue with Samsung to which they replied "Working as designed"
No other phones work like this, only Samsung and their ****ty bluetooth switching.
I think you can also solve this by going AOSP or AOKP.
I have no issue with my s3 when connecting to audio or phone. and im able to answer calls, and play music no problem
How did you pair both? Do you have to switch between the two?
Sent from my SPH-L710 using xda premium
I am also having this same problem but only after flashing a customer ROM. With the costume ROM the phone will connect phone and I can make calls no problem but I can not get music to stream to my car stereo no matter what I do with the costume ROM when back to stock just to verify this and I have no problems streaming music on stock ROM or making calls via Bluetooth.
Sprint GS3 horrible in car
The first two days the phone worked great. Now it connects but the sound is noisy and unintelligible from either end. I don't know what changed. anyone can help me on this? can I stream music through bluetooth if it ever starts working again?
are you running the stock software not modded in any way?
Anyone know how to get the headset jack to NOT.shut. down the bluetooth in phone calls? I play music through the jack when driving. If a call comes in, the call is following the earphone path and bluetooth wont work until it's unplugged.
Thanks.
Sent from my SPH-L710 using xda premium
Bump... anyone?
Anyone know of a rom where this doesn't happen?
I've experienced this same problem. Another irritating "feature" I experienced was when I was on a call on a headset, I went to get in my car and was expecting it to connect and switch to handsfree. I even unplugged my headset FIRST before starting the car. The car and phone wouldn't connect while the call was still going on. I had to wait until I ended my call before it would connect.
My old HTC EVO 4G would handle bluetooth switching like this so easily. Extremely frustrating that Samsung can't get it right.
From what I was able to gather via Google searches, this is a known issue and there doesn't seem to be any kind of fix. I don't think switching ROM's will help although you might want to look into CM9/10.1?