Hi ive been searching the forums trying 2 find the new touchflo 3d to install on my my blackstone and i cant find it i wonder if any would could point me in the right direction so i can install the new 2.5 touchflo on my devices
cheers callum
TouchFLo 2.5 isn't ready for actual use yet. You'll have to wait a little while longer until a lot of bugs are worked out. Just keep an eye on the ROMZ section as I'm sure it will pop up soon enough. There is a rom out right now that has TouchFLo 2.5 in it but GSM is crippled so you cannot send text messages as well as some other problems. There is a link in this thread to a cooked ROM with touchflo 2.5 if you want to try it out.
http://forum.xda-developers.com/showthread.php?t=530584&page=3
Thanks for the replay i want the same touchflo version on miris 6.5 rom which is the same as the touch diamond 2 is that version availble 2 install on 6.1
cheers callum
The most up to date version of manila that I have seen cooked into roms is TouchFLo v2.1, but I have not seen this available as a cab. Then again, I never look for cab versions of TouchFlo. I personally use Dutty's 3.9XT Turbo rom. It is WM6.1 and is available with manila V2.1. Great rom, fast, and stable. Sorry I can't tell you where to find a .cab file for touchflo v2.1 though.
Thanks for your reply il look for a .cab. i flashed miris 6.5 which had manila but i found that if made the camera a lot pixely maybe it was just me so i flash back to the htc wm6.1 im a bit gutted that the htc touch hd is not getting the 6.5 upgrade and was thinking of selling a getting a diamond 2
cheers callum
Manilla Cab
Really not sure u can find one with that, also do you know how big a
cab file with that would be? will take 1hour to install it!
but good luck and hope u find what u looking for..
Obalia73
No CAB for Manilla 2.0 or 2.1. Never has been, probably never will be. Only ever seen it cooked into the ROM.
Did some know can put new touchflo 2.6 on Htc Diamond? I look now Htc Leo on youtube and look so good!
Ya, i saw it, its awesome..just check out www.gsmarena.com
For more details...
Look so Htc Hero,i liked this rom!
you can not just use the package from Leo and install it on the Diamond, the original package is WVGA so it needs to get ported to VGA first
currently there is no porting project started for v2.6, but there are 2 other manila ports going on atm
the first is my own Gen.Y Manila v2.1
and the second is MuttiM's Manila v2.5 port
please note that porting that a lot of time, so I wouldn't expect this on our devices anytime soon
So how come guys on pocketnow.com have manila 2.6 on diamond2?
I wanted it too!
Well, Diamond 2 is WVGA unlike our Diamonds; so no porting required.
hi everybody is there any way to have the new manila 2.5 as a cab installer and then as a panel like i used to do whit manila 2.1? thanks
I wonder if that's possible? But if yes then that would be really nice.
This is a really good idea...who can help XDA members?
Actually I can't recommend installing TF3D by cab, because it consists of a lot (and I mean a lot, certainly 2.5!!) of files. And installing it by cab will make a huge impact on the system.
The first TF3D for X1 was available as a cab, but the diffence between installing by cab or cooked in where huge. TF3D by cab had all sorts of quirks and was slow a h*ll.....
FOr example, the manila 2.1 package alone is almost 40mb (and 2.5 is even bigger) so you end up with a cab of about 50mb.
But back to the point, haven't seen a cab of manila 2.5 (and there probably will not be one for the above reason).
thanks Lokatho for the esplaination, btw now that i know about the problem of a cab i was just wondering if a rom with a manila 2.5 PANEL could be built...
-=W1S3=- said:
hi everybody is there any way to have the new manila 2.5 as a cab installer and then as a panel like i used to do whit manila 2.1? thanks
Click to expand...
Click to collapse
Found this online: http://www.pda4x.com/read.php?tid=103696
Guess they have CABbed Manila 2.5....interesting. Wonder what the file size is.
Now gotta look for a CAB to make it a panel.
angusrouse said:
Found this online: http://www.pda4x.com/read.php?tid=103696
Guess they have CABbed Manila 2.5....interesting. Wonder what the file size is.
Now gotta look for a CAB to make it a panel.
Click to expand...
Click to collapse
It's just a manila 2.5 theme and not a manila 2.5 cab!!!
It was made by a XDA member and you can find it here
LoL
btw nice to see that my request is appreciated
Mopral said:
It's just a manila 2.5 theme and not a manila 2.5 cab!!!
It was made by a XDA member and you can find it here
Click to expand...
Click to collapse
it possible to install in xperia with wm 6.1 ??
Lokatho said:
Actually I can't recommend installing TF3D by cab, because it consists of a lot (and I mean a lot, certainly 2.5!!) of files. And installing it by cab will make a huge impact on the system.
The first TF3D for X1 was available as a cab, but the diffence between installing by cab or cooked in where huge. TF3D by cab had all sorts of quirks and was slow a h*ll.....
FOr example, the manila 2.1 package alone is almost 40mb (and 2.5 is even bigger) so you end up with a cab of about 50mb.
But back to the point, haven't seen a cab of manila 2.5 (and there probably will not be one for the above reason).
Click to expand...
Click to collapse
Make ROM that will preserve all user info and programs and i will update immediately.
Flash a ROM!
It would be really pointless to have a cab of 2.5, it would slow down your whole device and would barely run!
if you want 2.5, to the easiest and best way, flash to one of our chef's great ROMS!
I think that Valkyrie 3.2 is the best....but there are others....like NRG's wwe energyrom....and ITJE TOUCHIT LEO...
if you want 2.5 you need to flash!
and as far as a panel goes...it would be relativley pointless if you are already using 2.5 as your homescreen....
and if you are a NEWB....you should look and search into 2.5, the threads and roms before opening relatively pointless threads...
just my 2 cents
acidbath5546 said:
It would be really pointless to have a cab of 2.5, it would slow down your whole device and would barely run!
if you want 2.5, to the easiest and best way, flash to one of our chef's great ROMS!
Click to expand...
Click to collapse
You are right, apart from the fact that (as stated out in my recent thread) you are supposing that everyone is in love with WM6.5.
I was looking as well for a cabbed Manila 2.5 to install it on WM6.1, so it would really be great to have it (or, have it cooked on a WM6.1)
there are modules and dll's for the new leo which wont work on 6.1
there is a manila 2 cab
linkt to thread http://forum.xda-developers.com/showthread.php?t=448178
its a bit confusing, you have to download EnableRapi.cab first and install it. (in wont work the other way around, i tried it.
than you install the new manila 2 cab to internal memory. (that takes about 2 hours + in the tread are 3 different manilla cab files and only one has landscape i think, the beta3 but just use my link)
i have direct links to the files
EnableRapi cab: http://forum.xda-developers.com/showthread.php?t=300592 (you have to scroll down a bit till you see the file)
manila 2 cab: http://rapidshare.com/files/218194087/TF3DHDB3.cab
and about the speed of manila 2, i have it installed one week ago and it crashed 1 time so far because i pressed accidently on picture presentation and than on weather tab and than switched to landscape (that was too much xD). and tabs like programs, settings and weather always take some time to show up. (about 2-4 seconds) all other tabs are fast once they loaded the first time. landcape switch takes always around 4 secounds, never longer.
and someone said its a huge impact on the device to install a 45mb cab file, and that might be true, but i have installed like 3 different manilas and this one 3 times (and uninstalled again, it never worked because i always forgot something) i never hardresetted the x1 after all the installing and it still works quiet good.
forgot to say, its not a panel, just a today element. and im using winmo 6.1
Thanks to show them how to install manila 2.0 on Wm6.1 but they search a cab for manila 2.5
yes, i understood all you're saying, so i know that a rom with manila 2.5 in it will run better. Now that i know it, i'd like to know if with a rom like this will be possible to run the manila as a panel instead of run it as the standard today screen. I want this option just because i like to change today home screen very often and also because if i have manila 2.5 in use in the today and i open another panel, it will still run in backgroung, making the whole phone go slower...
(sorry for my bad english :S hope you'll understand it...)
rotastrain said:
there are modules and dll's for the new leo which wont work on 6.1
Click to expand...
Click to collapse
Miri did a WM6.1 ROM with Leo
http://forum.xda-developers.com/showthread.php?t=547278
Does someone knows is there a version of Manila2D v2.0 build 19191432 porting or resizing to VGA.
This version of Manila consumes less RAM then Sense so we can have latest wm6.5 and manila with enough program memory.
Here you can see how m2d v2.0 looks like.
xxxlux said:
Does someone knows is there a version of Manila2D v2.0 build 19191432 porting or resizing to VGA.
This version of Manila consumes less RAM then Sense so we can have latest wm6.5 and manila with enough program memory.
Here you can see how m2d v2.0 looks like.
Click to expand...
Click to collapse
That will be a nice rom indeed, I really need that rom!
And I think that a thread about porting manila 2d to vga existed already!
Is there a QVGA version of Manila 2.5 ?
levure said:
Is there a QVGA version of Manila 2.5 ?
Click to expand...
Click to collapse
thankssssssssss
+10000000000000000
i need that too
i think manila 2.5 doesn't eat too much ram
I'm using 2.0 manila rom and free ram when i use M2D is about 27MB,28Mb sometimes
So i think 2.5 manila should be cook with that rom,and 24,25MB free ram is perfect
sorry bad english
I'm pretty sure there is no manila 2.5 for qvga devices, since there isn't even a working 3D driver for the Artemis.