Hey Guys,
Strange issue I'm having where if I'm on the line I don't hear any notification for an incoming call. The initial call will ring/vibe just fine, but there is nothing audible for the guy that calls when I'm already on the line.
Another weird quirk I've noticed is that from time to time my default ring tone will change to Ring01-WindowsPhone on it's own, and at that point every call that comes in will be silent until I change it back to another ring tone.
Any ideas? Thanks.
Nila
Hi, after froyo update sometimes the phone dont "hang up" when you reach voicemail. You hear the ring tone in the background and even if you call a new contact it´s still in the background. But it seems that the call is ended but the phone dont understands it and simulates the ring tone. The only way to restore it is to restart the phone. Anyone know anything more about this?
bump......
I've got exactly the same problem.
Making a call to voicemail and somehow the software doesn't register that the call is accepted and the ring tone just keeps going in the background even long after the original call has ended..
Extremely annoying.. Anyone got any solutions?
Guys,
Firstly thankyou all for your help, tips and suggestions to maximise the performance of this great handset.
I have done the upgrade and included battery increment and top display change and am extremely happy!
I just have this issue now that with the phone set for incoming calls on constant ring and vibrate, it begins ringing and vibrating at the required volume/level for one or two rings and then fades away dramatically to being only just loud enough to be heard. Is there anyone who can help with a program install fix etc?
Thanks in advance.
Daniel
Dbfoster said:
Guys,
Firstly thankyou all for your help, tips and suggestions to maximise the performance of this great handset.
I have done the upgrade and included battery increment and top display change and am extremely happy!
I just have this issue now that with the phone set for incoming calls on constant ring and vibrate, it begins ringing and vibrating at the required volume/level for one or two rings and then fades away dramatically to being only just loud enough to be heard. Is there anyone who can help with a program install fix etc?
Thanks in advance.
Daniel
Click to expand...
Click to collapse
Look in, "settings, sounds & display." There is a setting that reduces the volume of your ring when you pick up/move your phone. Its called, "quiet ring on pick up."
Hope this helps,
Nylo
I believe there is also a setting for increasing ring or decreasing ring so make sure you check that out as well. I might be mistaken as I have stopped using my TP2 but I believe there is.
Thanks heaps, both suggestions are absolutely right and I had missed the 'quiet to touch' in the advanced settings after the firmware upgrade.
Sorry for what would now appear to be a silly question but I was starting to think I had done something seriously wrong.
Once again, thanks for all the great tips and advice.
Best Regards,
Daniel
My Lumia 900 black vibrartion works like this..
During Incoming Call:
When in Vibra+Ring Mode:
Vibrates only for first ring and then stops. Only Ringing occurs afterwards.
When in Vibrate Mode:
Vibrates normally like any other phone.
Is my device working properly in Vibra+Ring mode. I hope it should Ring and Vibra till the incoming call stops. Correct me if I am wrong.. Is my device defective?
Thanks.
Can someone please answer this question by taking some time by testing your device and compare it with mine?
Thanks..
Are you saying your phone vibrates when in Ring mode?
I'm pretty sure my Vibra+Ring mode is the same as yours; it will vibrate on the first ring but then only ring from then on.
sakante89 said:
My Lumia 900 black vibrartion works like this..
During Incoming Call:
When in Vibra+Ring Mode:
Vibrates only for first ring and then stops. Only Ringing occurs afterwards.
When in Ring Mode:
Vibrates normally like any other phone.
Is my device working properly in Vibra+Ring mode. I hope it should Ring and Vibra till the incoming call stops. Correct me if I am wrong.. Is my device defective?
Thanks.
Click to expand...
Click to collapse
Mine works the same way... which now explains why i miss a bunch of calls when Im walking in the street in NYC and dont feel my phone vibrate in my pocket.
Doh!
This is kind of weird implementation. Hope this gets updated to vibe/ring at the same time throughout the entire incoming call.
ElNino77 said:
Are you saying your phone vibrates when in Ring mode?
I'm pretty sure my Vibra+Ring mode is the same as yours; it will vibrate on the first ring but then only ring from then on.
Click to expand...
Click to collapse
Are you saying your phone vibrates when in Ring mode?
Edited my question.that was a mistake.
sakante89 said:
Are you saying your phone vibrates when in Ring mode?
Edited my question.that was a mistake.
Click to expand...
Click to collapse
Ok, yeah that makes sense. And yes, my phone works the same way.
I just tested my phone as well and it only does the initial vib then stops as the phone continues to ring. I don't like that. I like for my phone to vibrate and ring at the same for the duration of the call. Interesting find. I'll probably end up missing calls as well because of this.
Sent from my Lumia 900 using Board Express
Same here, vibrates on the first ring only. I didn't even notice that until I saw this post. This could possibly be an issue for me in the future but right now it's not really a big deal as I didn't even realize it. The only time I really do need vibrate is when my phone is on silent.
Yeah..this is an important issue as we might miss calls during traveling. Single vibe would not suffice.
Traditionally all NOKIA devices vibrates and rings at the same time. This device is working weird which can be fixed by a software update.
We should inform Nokia about this issue in their conversations by pointing to this thread.
I just tested mine. It will vibrate first and then ring, but once the ringtone has cycled, it will vibrate again and then ring, and so on.
Choose a short ringtone and set vibration to on. Then try making a call to the device. Allow the ringtone to cycle at least twice. I know this isn't the equivalent to vibe with ring, but at least I do get more than one vibration with my ringer.
Here's a observation...
I'm noticing that this phone actually NEVER vibrates and plays a sound at the same time. Such as new SMS or new email... the phone will vibrate first and then ding, same as an incoming call (vibe then ring).
So I'm wondering if there is possibly some sort of limitation (hardware or software) that doesn't allow the Lumia 900 to vibe & play sound simultaneously.
Thoughts?
I believe that WP7 is configured to vibrate at the beginning of every cycle of the ringtone.
Because of this, if you have a long ringtone such as a song, it will only have the chance to vibrate once before your voicemail kicks in.
To test this theory i changed my ringtone to "Topic" which was included with the phone.
As expected, it vibrates, runs the two rings that make up the ringtone file, then vibrates again as it repeats. This means that shorter ringtones will result in more frequent vibrations.
Can someone else test this to confirm?
dfkd said:
I believe that WP7 is configured to vibrate at the beginning of every cycle of the ringtone.
Because of this, if you have a long ringtone such as a song, it will only have the chance to vibrate once before your voicemail kicks in.
To test this theory i changed my ringtone to "Topic" which was included with the phone.
As expected, it vibrates, runs the two rings that make up the ringtone file, then vibrates again as it repeats. This means that shorter ringtones will result in more frequent vibrations.
Can someone else test this to confirm?
Click to expand...
Click to collapse
You are right...works the same way..
Vibration in any lumia
I been having issues with the vibration as well. I have a Lumia 710 and have tried on a 800. The short ringing tone works fine to keep it vibrating.
But I´ve heard you can actually have the phone ringiing and vibrating at the same time.
there is a post in here
http://forum.xda-developers.com/showthread.php?p=11948890#post11948890
but it only workls with HTC. i have been looking for a program or a registry editor that can change the vibration function on a LUMIA.
Hi everyone, I gust got an unlocked HTC 10 directly from htc and am having an issue with the ringtone volume. It sounds loud enough when choosing ringtone, but when the phone actually rings when receiving a call, that same ringtone sounds at least 20% quieter. Any suggestions how this can be fixed? I tried just about all the settings in sound & notification but nothing made any difference.
Thank you in advance for any input...
madelman99 said:
Hi everyone, I gust got an unlocked HTC 10 directly from htc and am having an issue with the ringtone volume. It sounds loud enough when choosing ringtone, but when the phone actually rings when receiving a call, that same ringtone sounds at least 20% quieter. Any suggestions how this can be fixed? I tried just about all the settings in sound & notification but nothing made any difference.
Thank you in advance for any input...
Click to expand...
Click to collapse
Update: so it turns out that during notifications, only the bottom speaker is ringing and apparently it was designed that way. I spoke with HTC support and they are sending me a new phone, but judging by what I read in other threads and forums, the new phone will work the same way as the one I have now.