Can please anyone help me to change my German rom to English or (even better) to Greek language? The rom version is 3.4.207.2 wwe (if this is helpfull).
I'm kind new here and after a lot of search, i haven't found anything for my phone. Thanks..
Quick and simple solution to your problem is that you need to find the English (Greek) ROM for your device...then you need to update your device with this ROM.
To be able to flash your phone with a WWE (= English International) Rom, you need to "CID" unlock your phone first with USPL.
Without CID unlocking your phone, you wont be able to flash your phone with an English (Greek) ROM.
After CID unlock you will be able to flash any ROM to your device.
Try to do this :
http://forum.xda-developers.com/showpost.php?p=2841505&postcount=2
Thanks my friend. I'm gonna try to do that. Where can i found this software for CID unlock?
Ok. I've got it! I'm gonna d/l them and let you know. 1 last question pls?! What is CID?
Last help..?
DavyR said:
Quick and simple solution to your problem is that you need to find the English (Greek) ROM for your device...then you need to update your device with this ROM.
To be able to flash your phone with a WWE (= English International) Rom, you need to "CID" unlock your phone first with USPL.
Without CID unlocking your phone, you wont be able to flash your phone with an English (Greek) ROM.
After CID unlock you will be able to flash any ROM to your device.
Click to expand...
Click to collapse
Perhaps you know where i can find a Greek Rom..? Yes..?
Maybe you should look here:
http://forum.xda-developers.com/showthread.php?t=401019
If it helps you...and use search most often
Regards
My problem is that when i'm trying to place any new rom, the phone goes in the state of Gray screen and when reaches the 3%, closes and lose the connection with the computer and the update goes on!! I would like to ask you a thing..! The phone must be restarted after the first step and must start with the old system, or i must wait to do something else? Because it does'nt do anything else! It stays a little bit in a "dark blue" screen and after that it closes. I have to open it again with the power button, to establish a connection with the ActivSync..After that, the program can procced but then comes the Gray screen with 3% and..BOOM! The phone wakes up in German again!!
To anyone that helps..Thanks
My problem is that when i'm trying to place any new rom, the phone goes in the state of Gray screen and when reaches the 3%, closes and lose the connection with the computer and the update goes on!! I would like to ask you a thing..! The phone must be restarted after the first step and must start with the old system, or i must wait to do something else? Because it does'nt do anything else! It stays a little bit in a "dark blue" screen and after that it closes. I have to open it again with the power button, to establish a connection with the ActivSync..After that, the program can procced but then comes the Gray screen with 3% and..BOOM! The phone wakes up in German again!!
Related
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
Hey,
Dunno, if this post belongs here, but couldnt find any spot to post. Mods may move this post.
So my problem is having a english language on my KS20
i have read almost every topic on this forum and googled a lot before i dare to bother u.
I bought my phone in Hong Kong with chinese software on it. Stupid, coz i thought i could switch it to english and read chinese at same time. NO
I read here, that i could reflash my gsm with an english rom. I tried the steps but didnt work.
My GSM:
WM6 OS 5.2.1630
ROM: v10b
Traditional Chinese
Problems:
1. At the Diag Setting: it says only "Ship" OS Image..
What can i do?
2. Got my phone connected to pc with LGMDP_1_1_.5_Build_12.11_Release, it shows the right phone name and "Enabled", but when i press download to backup my nv2. It goes in time out, each time at different time of saving.
3. tried to flash my phone in normal modus, and ofcourse after the failure of nv2 backup, it says checking connections and the seconds start running. I have waited for 5000s and still nothing.
Only a soft reset can bring back my phone and i am back where i started.
4. wanted to direct flash it in emergency mode.. but pc doesnt recognize the connectionport anymore.
So how can i flash my rom decently? can u plz make a more detailed how to? coz i really dun get it
a really step by step guide would help this noobie out..
thx in advance!
So...I've been using an older version of Dutty's ROM, but I haven't updated in a few weeks.
Tonight, out of nowhere, my phone will now only show a screen saying:
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information, please revisit the web site that you used to obtain your current beta release."
Strange...
I tried downloading the most recent version of Dutty's rom and loading it, but the computer says "Cannot connect to your PDA phone..."
What's going on here!?
I have tried resetting the phone via the reset button (under the stylus), and I have tried restarting the phone via soft/hard reset, but nothing works!
Everytime my phone turns on, it goes immediately to this white page saying the "This concludes the beta test of this software release..."
How can I make my Diamond work again?!?
Please help!
i am having the same problem tonight too
i did a hard rest.. didnt fix it.. plus i lost all the stuff i had on there.. but it's ok
i heard u need to reflash it or something but i donno the full detail.. hope someone here can help us... thanks
step by step instruction would be great
I think you must put your diamond in "bootloader mode". and you will reflash your phone with a new rom, or another rom...
Booloader mode (usb) = Volume down + reset
In the screen (down) = serial, and if you connect with usb you can see "usb" and now you can reflash!
how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen
i will try the "bootloader" mode, but i hope it works! i will post results a.s.a.p.!
Same for me on Dutty 2.3, but did hard reset and let phone set up. Do NOT change the date, I left mine as September, and phone will continue to set up and start. Now what I need to know is if I flash with latest rom will that allow me to set current date?
bigbro168 said:
how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen
Click to expand...
Click to collapse
You put "volume down" and, in same time, you put "reset" (you hold these 3 seconds) => and you enter in bootloader, then you connect your diamond to USB and launch installation...
i think you don't need a HSPL if you want flash with the same rom... but you may use another HSPL for another rom...
OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?
thanks fabe
but let say i want to flash the SwithBL Rom.. it's not the one i used b4.. do i still need HSPL? if yes how do i install so i dont get the black screen and it actually works?
theorie said:
OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?
Click to expand...
Click to collapse
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
i just downloaded & installed: V2.9_5_2_20275_RTM_Full_MSVC
http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
the password is: Duttys V2.9 RTM Finale
i have HSPL installed.
bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
careful you might get banned. see dutty's thread.
We have a thread for dutty's ROM. Please discuss there!
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
You can do thAT, on this way
Plug the USB cable to connect your Diamond with PC, make sure ActiveSync connected.
Copy "SSPL-Manual.exe" to Internal Storage on your Diamond.
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable. Your Diamond screen will turn "BLACK" and ActiveSync will disconnect. *This is normal behavior***
Execute the ROMUpdateUtility.exe.
Your Diamond will automatically restart when finished.
To make sure stock SPL has been flashed back, press and hold "Vol-" key and use stylus to press reset once. until you see the tricolor screen and if you can see version of spl which before you flashed, it's ok!
Greetz
sucro said:
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable.
Click to expand...
Click to collapse
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
when i want to install the original htc rom after received the upgrade present to 100 this error message appear .for this aim i need to downgrade my spl to stock. . is there any manual or howto link and also original spl files please link it. i have been searching for a while.
my stock spl was 1.93.
any help would be appreciated.
masa1977 said:
is there any manual or howto link and also original spl files please link it.
Click to expand...
Click to collapse
It's in the HardSPL Developer Edition Thread.
thanks a lot slow23
slow23 said:
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
Click to expand...
Click to collapse
You are welcome, try this, i discover this combination of buttons
ENTER+VOL UP = ALIGN SCREEN
that means, with this combinations of buttons, you can directly enter ALIGN SCREEN options, and try to align screen , sometimes this helped me, cause my touch screen has same problem, it start to freeze randomly, i don't know why, sometimes in right, sometimes in left corner, up-down, randomly, i noticed that htc diamond when is exposed , when i'm out and it's sunny weather, it stop to responding on touch, one my friend specialist for mobiles, tell me, maybe this happen, cause bellow screen in some pda is some thin rubber, and from heat it start to expand, and that cause problems, maybe this situation is in htc diamond...
greetz and good luck
Returning to Stock SPL
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
Hi
I have similar problem and I will tell you what I did to get back to Stock SPL.
1. Flash the BSBs latest ROM from this thread, http://forum.xda-developers.com/showthread.php?t=506533 . Either by RUU or moving the diaming.nbh to the storage, this ROM does not require allignment or any other input.
2. Install My Mobiler from http://mymobiler.com in your computer, where you can see your mobile screen in your computer and operate using your mouse.
3. Then return to the stock SPL as given in this thread http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39.
4. Flash your ROM again from the HTC. This can be done once the system connects to the phone.
I am successful in doing the above.
Regards,
V.Balaji
Hi all,
I have a huge problem and I hope you guys can help me. I tried to flash the orbit (german) artemis of my brother. First flashed the uspl and everything worked fine. At the end there came this penguin picture and the screen stayed black/blue. Then I flashed the rom (MossisROMV3.0GER Windows Mobile 6.5).
HOWEVER: Right then the battery of the laptop went down and the pc switched off. Unfortunately we couldnt plug it in, since we didnt have the cable with us. Now after pluging in the pc there were some connection error notices. Since I didnt know how to proceed I removed the battery of the artemis. I thought I should repeat everything from the beginning on. However the phone always got stuck at the blue o2 screen showing the data:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.88.90
OS 3.13.0.0
Softreset and harrest doesnt make any difference. The phone always gets stuck here.
Is the phone bricked?? Why then does it start? Please help me out asap, since the phone is needed. What can I do?
Thanks in advance
brm
first you are NOT CID unlocked (SPL 3.04.0000)
so you can only flash german orbit ROM on the phone to revive it
1. get to bootloader (press and hold the record button and reset the phone using stylus)
you will get the tri colour screen
2. connect the phone via USB to PC (no need to look for activesync/WMDC connection in this case)
3. and run the RUU (official O2 german ROM for O2 Xda Orbit)
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Hi,
thanks for the fast respond. I read the just before some where else and right now I am searching for the original german rom. However cant find it anywere.
Do you think the english one will work too?
best,
brm
sheennick123456 said:
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Click to expand...
Click to collapse
very few chances of that ....
but you can have a go atleast
i might be having an german official ROM not sure though
if i have it i will upload it ASAP
Hi,
thanks sheennick123456. Really kind for your fast responses, Finally I found the original german rom and right now i am flashing it. Afterwards i am gonna flash a new rom and hopefully everything will wirk fine. But thanks again for your kind help.
best,
brm
LOL even i got 1
uploading it now as i type....
it might help someone .....
which rom
Hi again,
after installing a wm 6.5 ger rom i must say i dont like it at all. can you recommend me another one? i think one with htc touchflo would be great, but which one is it?
If i want to flash a new rom, do i first have to flash the original rom before proceeding?
best,
brm