Related
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!
try original1.....search in de forum.....
diji1 said:
Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!
Click to expand...
Click to collapse
2days ago i got this problem .but now i recover my divice with '' mtty for remove all botloder imege . then updat with new rom.
first u have to know is ur divice G3/G4. then u flash with rom file
Hi, thnx for replies, but im afraid you misunderstood me somewhat.
The *upgrade* process appears to work, ie. Bootloader seems to work fine, the device freezes at the first *operator* screen*, where it shows OS & radio version - the t-mobile screen, NOT the bootloader.
I tried the "Exit_bootloader" app (=mtty?) with no success.
An
do 1thin u update another rom...make sure dat ur fone is g3/g4..then update. coz if u update the wrong rom dis wl happen...
Thanx. I own 3 universal & I upgraded another with the same ROM & it worked no probs. So problem is not with the ROM.
The device with the freeze is G3.
mamaich method
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .
Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodesel king.
Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodeisel king.
Hi everyone!
I really need help!
my samsung i780 is dead after i flashed the boot part with the eboot from DXHC4!
I already tried everything!
i flashed de boot part with E1, flashed the three parts with the c4 and e1 rom and nothing! the flash process always complete without errors!!
I can acess bootloader without problems, i can also entre the hard reset menu pressing the green , red and power button but when i press space to performe the hard reset nothing happens and i tried to wait several minutes!
when I power on the phone it doens't even show the samsung logo! Just black screen!
I would really apreciate some help!
thank you!
A good challenge for the I780 Specialists
I bet that the solution would be very easy
All the best to you
There are quite a number of answers posted. EFN had already explained too many times. He had said that the bootloader works fine, that's a good start.
Just get the necessary rom from EFN thread, phone rom PUHE1 and the pda rom DXHE1. There is even a tutorial on this in EFN thread (1st post).
g00ndu can you please help find the thread/topic where EFN explaines it, i'm having a hard time finding it!
thank you
I think he is talking about this:
http://forum.xda-developers.com/showthread.php?t=409258&highlight=EFN+PUHE1+DXHE1
download Flashing Guide Tutorial - at the bottom of the 1st post
did exactly as said in the tutorial....
nothing... it seems that the eboot is always the same.....
i don't know what else to do!
g00ndu i can't find the thread you are talking about....
where does EFN talks about the bootloader or a problem like mine??
could you please help me!
thanks!
hellboss said:
g00ndu i can't find the thread you are talking about....
where does EFN talks about the bootloader or a problem like mine??
could you please help me!
thanks!
Click to expand...
Click to collapse
Okay step by step:
Did you downloaded the russian rom i780PUHE1 (eboot+phone+pda)?
Did you downloaded the i780DXHE1 (pda only)?
Follow the tutorial, assuming step 1 to 4 had already been done.
(5) Launch Mirage updater. Select MIRAGE LV image as the profile
(6) Select EBOOT+PDA+PHONE and select the extracted RUSSIAN .img file
(7) Click on DETECT
(8) Switch on the phone while holding the ENTER and FUNCTION buttons (ALT BUTTON)
(9) After the system DETECT message appears, connect the phone via USB to your PC
(10) Wait until the image is written.
Before flashing to the DXHE1 rom first, please try to boot up and see if it works. If it is successful, you will see plenty of gibberish characters. This is EXPECTED, as the rom is russian.
If it doesn't boot up, then I am sorry I won't be able to help you.
Try the above first. Point to note is to choose eboot+phone+pda. Always press detect first before going through the enter+function+power on process.
If it works, please let me know.
g00ndu, thank you very much, but i already done that several times step by step....
but, unfortunately it stays the same....when i power it on it turns on the backlight but the screen remains black and nothing happens...
but thank you very much anyway!
hellboss, I'm sorry about your device. Perhaps it might be a hardware issue. I'm not sure.
While the device may have a black screen, you could try to see if the LED lights work, whether there is a sound after the system boot up. These are important clues to see if it is really hardware issue.
Once again, I wish you could find a solution to your problem.
Hi, i would like to know if it is possible to discover which ROM is installed in the equipment... I mean, the samsung doens't start i can only go into emergency mode,,, is it possible through the pc to discover which ROM is installed on it??
thank you!
hellboss said:
Hi, i would like to know if it is possible to discover which ROM is installed in the equipment... I mean, the samsung doens't start i can only go into emergency mode,,, is it possible through the pc to discover which ROM is installed on it??
thank you!
Click to expand...
Click to collapse
I'm not really sure, but have you try to dump your rom using pdocread, one of the itsutilsbin tools? Meaning get the Part00, Part01 and Part02 raw files which is your rom dump?
If i were you I will try most official rom to rescue the device first. like i780XHC4 that one has all three (healthy and normal) parts.
dogmood i already tried.... but still nothing...
g00ndu , to dump the ROM don't i need to change some values on some key at the pocket pc registry?? if so i can't because the pda doens't start....
P.S-the first time i flashed it i did it on a pc with windows xp but all the time the process was incomplete and i need to turn off the phone and restart the phone, and at the second time was succesful, now i'm doing it on a virtual machine running windows xp pro sp2,,,,, can my problem be related to that??
thank you!
I use a VM for the flashing myself, so this shouldnt cause problems.
If flashing the official rom (EBOOT & Phone & PDA) doesnt work for u then you have to consider the fact that your i780 busted on the hardware level.
The best thing to do now is to claim for warranty and make sure u sent them beack with official rom in your phone (HC4)
Hi EFN,
well I've considered that, and I think that my next move is going to be warranty
but unfortunately the ROM that came with the PDA was not the DXHC4, i bought my samsung in Portugal.
my problem now is that the PDA became dead when i flashed it with the DXHC4 eboot, and now that i can't flash any other ROM i can't put the original ROM, which i have a dump, on it....
so i think that is not going to be accepted on warranty....
honestly i can't discover what went wrong.... I followed every single step of the tutorial to revive a dead i780....
thanks!
P.S-> EFN, I'm a great admirer of your work (samsung i780 ROMs), unfortunately I'm not going to be able to try them......but... anyway keep up the good work!
I believe for as long as the rom on your i780 is an official one (regardless of version), Samsung will honor the warranty. You have to try to know. And of course dont tell them that you have been messing up with flashing this and that
well i think so, if the rom is an official one they will honor the warranty...
that's the why of my question about a way to know the version of the ROM installed on the PDA, but i haven't discover anything...
i guess will just try my luck and send it to warranty!
thanks!
Can please anyone help me to change my German rom to English or (even better) to Greek language? The rom version is 3.4.207.2 wwe (if this is helpfull).
I'm kind new here and after a lot of search, i haven't found anything for my phone. Thanks..
Quick and simple solution to your problem is that you need to find the English (Greek) ROM for your device...then you need to update your device with this ROM.
To be able to flash your phone with a WWE (= English International) Rom, you need to "CID" unlock your phone first with USPL.
Without CID unlocking your phone, you wont be able to flash your phone with an English (Greek) ROM.
After CID unlock you will be able to flash any ROM to your device.
Try to do this :
http://forum.xda-developers.com/showpost.php?p=2841505&postcount=2
Thanks my friend. I'm gonna try to do that. Where can i found this software for CID unlock?
Ok. I've got it! I'm gonna d/l them and let you know. 1 last question pls?! What is CID?
Last help..?
DavyR said:
Quick and simple solution to your problem is that you need to find the English (Greek) ROM for your device...then you need to update your device with this ROM.
To be able to flash your phone with a WWE (= English International) Rom, you need to "CID" unlock your phone first with USPL.
Without CID unlocking your phone, you wont be able to flash your phone with an English (Greek) ROM.
After CID unlock you will be able to flash any ROM to your device.
Click to expand...
Click to collapse
Perhaps you know where i can find a Greek Rom..? Yes..?
Maybe you should look here:
http://forum.xda-developers.com/showthread.php?t=401019
If it helps you...and use search most often
Regards
My problem is that when i'm trying to place any new rom, the phone goes in the state of Gray screen and when reaches the 3%, closes and lose the connection with the computer and the update goes on!! I would like to ask you a thing..! The phone must be restarted after the first step and must start with the old system, or i must wait to do something else? Because it does'nt do anything else! It stays a little bit in a "dark blue" screen and after that it closes. I have to open it again with the power button, to establish a connection with the ActivSync..After that, the program can procced but then comes the Gray screen with 3% and..BOOM! The phone wakes up in German again!!
To anyone that helps..Thanks
My problem is that when i'm trying to place any new rom, the phone goes in the state of Gray screen and when reaches the 3%, closes and lose the connection with the computer and the update goes on!! I would like to ask you a thing..! The phone must be restarted after the first step and must start with the old system, or i must wait to do something else? Because it does'nt do anything else! It stays a little bit in a "dark blue" screen and after that it closes. I have to open it again with the power button, to establish a connection with the ActivSync..After that, the program can procced but then comes the Gray screen with 3% and..BOOM! The phone wakes up in German again!!
Hi all,
I have a huge problem and I hope you guys can help me. I tried to flash the orbit (german) artemis of my brother. First flashed the uspl and everything worked fine. At the end there came this penguin picture and the screen stayed black/blue. Then I flashed the rom (MossisROMV3.0GER Windows Mobile 6.5).
HOWEVER: Right then the battery of the laptop went down and the pc switched off. Unfortunately we couldnt plug it in, since we didnt have the cable with us. Now after pluging in the pc there were some connection error notices. Since I didnt know how to proceed I removed the battery of the artemis. I thought I should repeat everything from the beginning on. However the phone always got stuck at the blue o2 screen showing the data:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.88.90
OS 3.13.0.0
Softreset and harrest doesnt make any difference. The phone always gets stuck here.
Is the phone bricked?? Why then does it start? Please help me out asap, since the phone is needed. What can I do?
Thanks in advance
brm
first you are NOT CID unlocked (SPL 3.04.0000)
so you can only flash german orbit ROM on the phone to revive it
1. get to bootloader (press and hold the record button and reset the phone using stylus)
you will get the tri colour screen
2. connect the phone via USB to PC (no need to look for activesync/WMDC connection in this case)
3. and run the RUU (official O2 german ROM for O2 Xda Orbit)
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Hi,
thanks for the fast respond. I read the just before some where else and right now I am searching for the original german rom. However cant find it anywere.
Do you think the english one will work too?
best,
brm
sheennick123456 said:
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Click to expand...
Click to collapse
very few chances of that ....
but you can have a go atleast
i might be having an german official ROM not sure though
if i have it i will upload it ASAP
Hi,
thanks sheennick123456. Really kind for your fast responses, Finally I found the original german rom and right now i am flashing it. Afterwards i am gonna flash a new rom and hopefully everything will wirk fine. But thanks again for your kind help.
best,
brm
LOL even i got 1
uploading it now as i type....
it might help someone .....
which rom
Hi again,
after installing a wm 6.5 ger rom i must say i dont like it at all. can you recommend me another one? i think one with htc touchflo would be great, but which one is it?
If i want to flash a new rom, do i first have to flash the original rom before proceeding?
best,
brm