Just curious if anyone has attempted to add a flash to th vogue? I noticed the other day when taking off the back cover the little circle mirror thing beside the camera lens easily pops out, so i decided to compare it to my titan and noticed that it appears that possible a l.e.d flash of some sort could perhaps fit in there.
anyone done this, and if so can u explain what is needed (software) and where to get the flash bulb that can be used. Thx
The hardware needed isn't there.
kash-alp said:
Just curious if anyone has attempted to add a flash to th vogue? I noticed the other day when taking off the back cover the little circle mirror thing beside the camera lens easily pops out, so i decided to compare it to my titan and noticed that it appears that possible a l.e.d flash of some sort could perhaps fit in there.
anyone done this, and if so can u explain what is needed (software) and where to get the flash bulb that can be used. Thx
Click to expand...
Click to collapse
cant. cant. c. a. n. t. be done. there isnt space for the flash bulb, and then you would have to think about where you would place the connections for the bulb. this is just hardware aspects of it, software side would be 10x as hard
Always bring a flashlight ! SOLVED!
actually if you look next to the speaker there is an external antenna connect ion there right below where the little door that pops out is... simply put it can't be done
You wanna keep that there for self portraits. Oddly enough after a year of having the phone i figured out that u use that mirror to center yourself or yourself and a friend when you can't see the screen.....
Related
guys,i have a serius problem with my htc tytn.my lcd is flashing,horizontal stripes are going up and down all the time.the screen is for the moment full of grey rounds,but after some sec it is ok for some minutes.it's look's like the software mistake,so i flash my rom and it is the same thing.is lcd out or what? i realy need some usefull advice!
thanks
i forgot to tell,that those flashing stripes are mostly when i chagre the pda.they are on when pda is not charging,but some time to time.when it is on cable,it is aufwul!
c'mon guys,my lcd is blinking like crazy.i need a solution.
need more info...really
It could be a range of things. Does it change when you move it, press the sides,tap the screen? Does it do it by itself.....when it is just sitting there...no external movement. More info needed.
yxgwfty said:
It could be a range of things. Does it change when you move it, press the sides,tap the screen? Does it do it by itself.....when it is just sitting there...no external movement. More info needed.
Click to expand...
Click to collapse
it has minor efects,if i tap on the screen when he is doing this.if i slide him to landscape,screen is turn,but stripes are going up and down like in portrait .it is do it by itself,yes.i put him on table,and suddenly bum,start flashing.
i thought there is some power bricks,you know,like the lcd is touchy for the minor change in power.but it is weird,realy.
i take some pictures with one old vga camera phone.hope anyone can help me with the problem.
http://img145.imageshack.us/img145/7804/slika008qi7.jpg
http://img71.imageshack.us/img71/7509/slika006wl9.jpg
http://img100.imageshack.us/img100/6112/slika010ap3.jpg
http://img74.imageshack.us/img74/1262/slika010qb9.jpg
it sounds as if the connector inside the phone is coming loose. If you are able, try and pressure the connector so the connection is good.
http://blog-imgs-1.fc2.com/i/n/u/inuchanbt/CHT9000_dismantle05.jpg
http://blog-imgs-1.fc2.com/i/n/u/inuchanbt/CHT9000_dismantle06.jpg
Thats the connection i am referring to. If you need assistance in dismantling the hermes, try the mod, Mike Channons guide
If it is not this, then i am not sure...
Do this as a last resort as it will void any warranty you may have with your phone... it also sounds as though the screen is on its way out.
miffymiffy said:
it sounds as if the connector inside the phone is coming loose. If you are able, try and pressure the connector so the connection is good.
http://blog-imgs-1.fc2.com/i/n/u/inuchanbt/CHT9000_dismantle05.jpg
http://blog-imgs-1.fc2.com/i/n/u/inuchanbt/CHT9000_dismantle06.jpg
Thats the connection i am referring to. If you need assistance in dismantling the hermes, try the mod, Mike Channons guide
If it is not this, then i am not sure...
Do this as a last resort as it will void any warranty you may have with your phone... it also sounds as though the screen is on its way out.
Click to expand...
Click to collapse
ya,i thought it is screen fault,but i doubt,because phone is relising scratchy voices trouht speaker.i will try that conector.i don't have warranty any more,so no big deal if i void this.
duh,i am not realy sure witch connector might be lose? i must say,my pda drop on the floor about 2weeks ago.maybe from there are these problems?
My desire Z is reasonably new a few months old. But Itd been let without use for about a month and when I took it out I noticed now when I open the keyboard the screen goes purpleish, not all over but tinged in places. White is purple in some places and there's green blotches near on screen icons. It looks like the colours have been dragged to the right slightly. I think its a hardware issue but its a pain
When keyboard is closed the problem usually isn't present or sometimes the distortion is minimal. ALSO iv now noticed the hard QWERTY keyboard no longer seems to function right eithar. Some letters arnt working most of the time.
Anyway ink how to repair it or know a guide? I this it mit be something to do with the cable.
If you want to strip your phone down to check that the ribbon you see when sliding the keyboard out then look at this
http://forum.xda-developers.com/showthread.php?t=1003310
There is videos showing you how to take the phone apart to replace the hinge spring,sounds to me to be a faulty display though.
If you do take the phone apart there is a screw with void sticker so your warranty will be good and gone,if it is a faulty display you could still un root and get it replaced?
Wait to see if anyone else has any ideas before breaking out the screwdrivers,
No its not a faulty display. Display is ok when screen is closed. Also I used a tweezers to push the cable in as much as I could at the back and it fixed the screen. . . . .QWERTY was still not as good as it shud be (but slightly improved) but after maybe 15open and shuts it came out again.
So this means I have to open it and unloosen it right? No simpler easier way to do it?
And the keyboard problems are caused by the cable too afaik.
The method in the video is the only way I know to gain access to the ribbons socket,still think warranty is your best bet as you have pointed out the keyboard is faulty,if you open it up and cant replace the void sticker/something goes wrong,then the warranty is gone and you have a broken phone...........................
Oh I forgot to mention I have no warranty so its no loss to me xD. The keyboard was fine when I got it though so it didn't come from factory faulty.
Ok then,if you want to have a fiddle about inside then you will need a 5 Torx driver to open up the back and a philips(very small)helps to have a magnetised one as the screws can be fiddly once you pop the case open,watch that video in the link I gave you to see how its done,best of luck
Lovely I'll give it a go. Thank you
Good stuff,If you need any advice PM and will see if I can help bud.
Hello, I saw that someone else asked a similiar question before but they did not word the question correctly and got little help.
On my HTC EVO logic board, there's three tan "ports" (I don't know what they are actually called). One for the front camera, one for the LCD, and one for the front panel.
While walking home one day, my screen started showing a dark spot. The spot got bigger, and I decided to take apart my phone (something I'd done before a few times) and try to clean things up. I put everything back together, and the LCD would not come on. After numerous tries, I finally decided the LCD was damaged. As I went back in the phone, I saw that regardless of whether you flipped the black tab on top of the LCD tan 'port' back or forward, the cable was capable of being pulled out, e.g., it was not secure. At the time, I thought nothing of it, but now that my new LCD should be here, I'm worried.
Is my LCD not working because the 'port' is broken? If so, what can I do to repair it? (I heard it is very difficult). I'm worried, because I paid a lot to buy a new LCD and will be unable to send it back.
http://guide-images.ifixit.net/igi/ZYHLZwIIVhjilEpT.large
Also, my front panel cable never sits 'perfectly'..that is, I have to connect everything else first, and then try my best with the front panel. The tape does not stay down flat completely.
These sorts of connectors can be fixed,but there is quite a bit of skill involved. Upload a picture and I can tell you better how hard it is. What I can tell you is that you probably cant do it yourself. I base this on the fact that those who have the necesesary skils will instantly know its going to be a pain. In fact,its easy to screw it up ,and sometimes you do,even if you DO know what your doing. Since I dont want to take my phone apart,Ill need to see a picture of it before I can tell you anything more. One thing to keep in mind is that sometimes the ribbon cable CAN be pulled out anyway,and is making good contact and there is some other problem. If you have not installed the new LCD,install it and see if it all works. If so,your good to go. As a general rule,the connectors are delicate and its not a good idea to pull them out. In fact,dont disconnect them if you dont have to. They have a limited number of connect/disconects they can take and they are very easy to break.
pflatlyne said:
These sorts of connectors can be fixed,but there is quite a bit of skill involved. Upload a picture and I can tell you better how hard it is. What I can tell you is that you probably cant do it yourself. I base this on the fact that those who have the necesesary skils will instantly know its going to be a pain. In fact,its easy to screw it up ,and sometimes you do,even if you DO know what your doing. Since I dont want to take my phone apart,Ill need to see a picture of it before I can tell you anything more. One thing to keep in mind is that sometimes the ribbon cable CAN be pulled out anyway,and is making good contact and there is some other problem. If you have not installed the new LCD,install it and see if it all works. If so,your good to go. As a general rule,the connectors are delicate and its not a good idea to pull them out. In fact,dont disconnect them if you dont have to. They have a limited number of connect/disconects they can take and they are very easy to break.
Click to expand...
Click to collapse
Well, I don't really have a means of taking a quality photo except with my computer webcam but I'll try in a second. I can't really show you because there isn't much to see. The little black bar that flips up and down to 'lock' the port is ineffective; the cable can be pulled out regardless. I know I can't fix the port/connector by myself, so I'm hoping that's not the issue. You have given me a lot of hope though. The new LCD should be here by Wednesday at the latest, so I'll be able to test it then.
Does my front panel affect the LCD? Since I dropped my phone on the corner, even with a new panel it does not sit 'perfectly'. I don't think they're related though.
BluRngerGurl said:
Well, I don't really have a means of taking a quality photo except with my computer webcam but I'll try in a second. I can't really show you because there isn't much to see. The little black bar that flips up and down to 'lock' the port is ineffective; the cable can be pulled out regardless. I know I can't fix the port/connector by myself, so I'm hoping that's not the issue. You have given me a lot of hope though. The new LCD should be here by Wednesday at the latest, so I'll be able to test it then.
Does my front panel affect the LCD? Since I dropped my phone on the corner, even with a new panel it does not sit 'perfectly'. I don't think they're related though.
Click to expand...
Click to collapse
I dont think so. I bet your ok. Just dont keep playing with the connector. I know,Ive done it. I sit there messing with it,wondering,is it broken? Is it good? Then the little black peice comes off in your hand or the plastic breaks and "well its sure broken now!" Remember,that little latch does not so much hold the cable in place as hold the cable against the contacts,if its making contact,its good to go.
Hi, all. The new LCD I receieved did not work. There are very minor differences in the two; such as some type of blue gunk on the silver part of the LCD, the connector is more of a dark orange on the new one while the original is a yellow-orange, etc. Also, again, the connector does not 100% fit in the slot. It goes in, but a small corner sticks out a bit and you have to either hold it in or clip it in [which I can't, because the black clip is broken].
The only possibilities I can think of are
A] Because the little black thing is damaged, no LCD will work in it. Therefore I need a new phone.
B] The LCD does not work.
C] The LCD is the wrong size.
At this point I want to just give up and get a new phone, which is very heart-wrenching because I love my EVO and I doubt I can afford the only other phone I like, the Samsung Galaxy S II Epic Touch 4G.
Is anyone able to identify what connector is used on this phone for the LCD? I broke a pin on the connector while trying to repair a cracked screen. I would like to buy it and re-solder it on to fix the phone.
Can someone link the correct connector maybe from digikey.com?
Broken latch
I too have a problem with the connector... the plastic part that connects the ribbon cable to the main board has broken. There must be a place to buy these tiny plastic latches... does anyone know? Your assistance will be greatly appreciated!
Mac-
So I noticed my tablet wasn't really turning on when I pushed the power button. I took it apart, cleaned the contact points following a post I found on here, then the small metal connector flew off due to me loosing grip of the "tape" holding it on. I ordered a replacement part and I noticed there isn't a lot of info on how to change it, take it out, precautions to take or anything. My tablet is running the newest OS of android for the nexus 7, and is turned on. I would post a picture, but apparently I need to make 10 posts before I can do that...
My question (s) are:
1: Should I take out the battery to do this? I've seen a guy on youtube do that, and I don't know if that is a step I need to take.
2: How exactly does it come out? I've only seen one video of a guy taking it out and putting it back in. I couldn't see much due to the fact that where it connects is small. I want to make sure I don't break anything else.
and 3: I've heard people say that you need a "spludger" for this or something, I don't know what that is, but then again, I also heard someone else say you can use a toothpic to do the same thing. Is that safe?
Thanks for taking your time to read this, and I hope someone out there can help me out. I really just want to get the thing to turn back on with out me needing to plug it into the charger, or move the "power to the volume button" ect.
Any advice at all would be helpful.
I'm not sure what you worry about, it's an easy component to deal with.
Don't remove the battery, just disconnect its black plug.
k23m said:
I'm not sure what you worry about, it's an easy component to deal with.
Don't remove the battery, just disconnect its black plug.
Click to expand...
Click to collapse
I just never really tinkerd with something like this. I know it looks easy, but I never opened a zif seal or w/e its called. What exactly do I flip up?
I'm sorry for my "Noob" questions, I'm normally good with hardware stuff, but I want to just make sure I do this right.
deanharkins said:
I just never really tinkerd with something like this. I know it looks easy, but I never opened a zif seal or w/e its called. What exactly do I flip up? I'm sorry for my "Noob" questions, I'm normally good with hardware stuff, but I want to just make sure I do this right.
Click to expand...
Click to collapse
No worries :good:
See the black flap?
Flip it up, slide out/in the connecting ribbon and flip it down to secure the connection.
k23m said:
No worries :good:
See the black flap?
Flip it up, slide out/in the connecting ribbon and flip it down to secure the connection.
Click to expand...
Click to collapse
Huh, seems simple enough. Thanks for the info! :victory:
Hi,
First you can all say i screwed up and i am stupid.... i assume and i feel stupid, trust me !
I don't know anything about electronic or programming as you but i want to share and maybe find a solution with you for my problem.
3 days ago, I wanted to clean my lens because some dust were on it, so i put out the 2 screws around the lens... of course i did not see they were different...because i am stupid with it ! when i clean it i mixed the two screws so the big one went to deep behind the plastic and make a perforation on a component.
I join a picture to let you see a small hole in the blue part on the right of the camera lens !
Since, the battery is down in 3hours. Android tell me the system use around 80% of the battery and it is warm on the plastic around the lens.
The wifi never want to be put on and the bluetooth too (the MAC WIFI is now : 02:00:00:00:00:00)
The telephone and the 4G are working perfectly
I tried to put a small electric scotch on the hole but this don't change anything.
I just want to use this phone as a phone now, i don't care if the bluetooth, the wifi or the camera is working well or not at all....
Is it possible with the hidden menu to disconnect this component???
Do you have a solution which allowed me to continue using this phone which is perfect otherwise?
Sorry for my english....as you can see, i am not so good with it !
Thanks in advance for your advice...
Any idea of
What is the component i touch with the screw???
how i can use the hidden menu to disconnect wifi and bluetooth???
Thank u
nitsuguaaaa said:
Any idea of
What is the component i touch with the screw???
how i can use the hidden menu to disconnect wifi and bluetooth???
Thank u
Click to expand...
Click to collapse
I have a vs985 & yours is a d855, but I think the boards are similar enough to try and help.
It's not a component you hit - it's just tape. I opened up my phone and tested that spot on the board with a DMM and it looks like a ground plane underneath the tape you punctured. That in itself shouldn't be causing your problems, but if your screw went through the ground plane & into the board it may be shorting something out which could be causing your issues. If that's the case I don't know if your phone is salvageable.
1)Try removing the back cover and see if the issues go away. There is a possibility that when you re-assembled the phone something ended up out of place/off its contacts.
2)Also, I'd take a closer look and see how deep the screw went. Maybe take a fine tip tweezer and see if there is some of that ground plane mashed in the hole & try to gently peel it out.
3)And, of course, try resetting your phone or even re-flashing at some point - just so you can know for sure you didn't have some weird software glitch that just happened to show up after you opened your phone.
Hidden menu - I've never used it and I'm not on stock so I can't tell you much about it's functions. Here's a link... https://www.reddit.com/r/LGG3/comments/3z4nwi/lg_g3_hidden_menu_on_60_marshmallow/
Good luck - hope you get it sorted out
thanks,
I ll try tomorrow and tell you ASAP !!
THX again to spend time for me