Can anyone tell me which HardSPL (+ version) I should be using on my XDA Ignito please? I'd like to use the Dutty ROM.
And yes, I've searched, but I couldn't find any posts that answered this exact question.
Reado said:
Can anyone tell me which HardSPL (+ version) I should be using on my XDA Ignito please? I'd like to use the Dutty ROM.
And yes, I've searched, but I couldn't find any posts that answered this exact question.
Click to expand...
Click to collapse
have you even read the 1st post in duttys thread????
it is stated what to use if you look
look i could see it
""" Before Flashing Please ensure You have UN_Signed HARDSPL install on device this will ensure your device wont get bricked.
Thanks To Jocky2001 For HardSPL
http://forum.xda-developers.com/showthread.php?t=408621 """
why couldn't you??????????
Because in the same thread I saw people complaining about errors on their Ignito - Someone posted a question relating to an error on their Ignito and is still waiting for a response - I don't really want that to happen to me, which is why I thought I'd ask...
Reado said:
Because in the same thread I saw people complaining about errors on their Ignito - Someone posted a question relating to an error on their Ignito and is still waiting for a response - I don't really want that to happen to me, which is why I thought I'd ask...
Click to expand...
Click to collapse
If you don't want the possibility of errors, then don't mess around flashing your device, leave it as it is. Read the stickies - there is plenty of information to enable you to make a decision
Thanks for no help. Much appreciated.
At the risk of being told off for encouraging you
A search "Ignito hardspl" of the Diamond root forum produced some good threads of which
My mini TUT is one.
Admittedly not a full ROM flash but the principle and Hard-SPL are the same
HTH
Kim
Because my Ignito already had an spl 1.93. I used
RUU_Signed_1_93OliNex_HSPL_UnsignedEdition. from the link in Cozzy's reply
I have flashed several times now with different roms succesfully.
Hope this helps.
Related
Dear All,
I spent a lot of hours, days, reading the posts on the forum about the Universal and upgrading it. I didn't find some answers.
I still have some open questions that I request your help in order to have a safe upgrade.
I have a Qtek 9000, that is SimLock.
I would like to Upgrade to an AKU 3.5 ROM or to one Crossbow ROM ( still under assessment)
Now my questions:
To upgrade,
I will have to upgrade bootloader, because since Aku 3.2 Rom , it needs to be 1.01. That is clear.
Edit: Opsss tried bottloader for first time and my version is 2.01 So no bootloader upgrade, but new question:
Sim Unlock works with bootloader 2.01?
1 - Do I need to SIMUNLOCK before ROM or Radio ROM upgrade? If yes:
- I will need an oficial radio ROM. Which one? Are 1.13 or 1.14 is OK?
- Must I first Simunlock and only after upgrade the bootloader?
2 -Country Code error, what is it? (Solved)
Edit : About Country error, no specific answer, but i got almost what I looked for.
Thx you all for the hard work and colaboration on this site.
Cheers
TADAA... answers
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
bastiaanoskam said:
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
Click to expand...
Click to collapse
I know how to solve the country error, I just would like to get more info about it.
About the other post, I will look for it, but when i made search ( last time was the last week) I didn't find the answers i look for.
Since I looked and didn't find it could you please provide a link? ( sorry)
Thx for your help.
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
tripledes said:
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
Click to expand...
Click to collapse
1 - I do agree that there is a lot of info about the upgrade process, I just didn't find the answer for what I'm looking for.
2 - I didn't find a post where is stated that the device should be unlock to install the new ROM, but I also din't find the oposite, so my doubt.
3 - It seems that I should try first and if I get the error, go for the alternative method. I woul like to jump this step, but if there isn't other way, well, that's life
4 - Maybe it's a bad interpretation on my side of the wiki post. Porbably only some I-mate based roms need the bottloader upgrade.
thx for the help
Is there any German ROM from any manufacturer or provider available for the Trinity?
Thanks in advance.
Regards
freggeln
Yes there iss, it is WM5. Next time read first befor you ask.
memba said:
Yes there iss, it is WM5. Next time read first befor you ask.
Click to expand...
Click to collapse
While I'm the first to say "search first, ask later" and "don't create a new thread unnecessarily - there are ways and ways to say things.
Like did you try a google search?
Or have a look here - and try to search the site first before creating a new thread - otherwise the site can get congested with lots of small posts of no interest to anyone asking the same questions!
have a look here: http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades - or try the HTC website even!.
But yes, you're right - people should read others hard work in the threads before asking questions.
memba said:
Yes there iss, it is WM5. Next time read first befor you ask.
Click to expand...
Click to collapse
you can´t read yourselve?
He is asking for an WM6 German ROM and not for WM5.
Yes there was a non official WM6 ROM by bepe. He has to close and to delete his thread because some people have a problem with his work.
Have a look at this thread page 4 and 6.
To the others please calm down.
sammy_deluxe said:
you can´t read yourselve?
To the others please calm down.
Click to expand...
Click to collapse
Hmm - these two phrases in the same thread Makes me laugh.
I was trying to be as calm as possible - while making the point that unnecessary threads like this one just pollute a great forum. My point about searching remains relevant - and no I didn't read the title of the thread. Apologies.
However, as freggeln got as far as the Trinity Mobile 6 forum - a couple more clicks or searches would have found the info he wanted.
Finding the fact that there is NO official (released) WM6 ROM yet for the Trinity is not difficult, either. My redirection to the Available ROM versions page was the most useful bit of info that anyone could provide to a newbie looking for a ROM, I think
sammy_deluxe said:
you can´t read yourselve?
He is asking for an WM6 German ROM and not for WM5.
Click to expand...
Click to collapse
I see reading is a very hard thing, "from any manufacturer or provider" is written in his Post so he wants an ORIGNAL HTC ROM even if it's brandet with some Provider addons. And ORIGINAL ROMs are WM5 only.
But OK this thread is hopfully over know
memba said:
But OK this thread is hopfully over know
Click to expand...
Click to collapse
I think there is a more important thread.
Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?
maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.
Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.
that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?
Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...
yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!
no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.
i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Thankz guys thatz helpful
racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.
I'm wanting to get WM6.1 on my Orange (UK) SPV M3100, so i'm following the instructions at http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
My question is:
There appears to be hundreds of roms to download.
Which one should I download?
Many thanks,
Ian.
Let the flaming begin
shanetheclassic said:
Let the flaming begin
Click to expand...
Click to collapse
NOT on topic or helpfull, better off NOT posting at all sir. We were all noobs once.
@djsky123, take some time to read through the threads in this forum and familiarise yourself with the ROMs currently alive....CRCs, PDAcorner and MRH seem to be the current ROMs in progress..
I think CRC's ROM is probably the best in existence...
I might have a little bit of bias though
Seriously though, have a read through what is included on the ROMs and see what fits your personal tastes...
Just make sure you flash your device with HardSPL first to prevent future tears...
CRCinAU said:
I think CRC's ROM is probably the best in existence...
I might have a little bit of bias though
Seriously though, have a read through what is included on the ROMs and see what fits your personal tastes...
Just make sure you flash your device with HardSPL first to prevent future tears...
Click to expand...
Click to collapse
Well, yeah... i took the plunge and did your 6.1 release 11.2 (hope you don't mind).
Seems good so far. - The wife's asking when my grandad died though.. took a bit of explaining why I had someone elses on my phone...
Thanks for welcoming me, and I'm sure i'll be on here over the coming months.
djsky123 said:
Well, yeah... i took the plunge and did your 6.1 release 11.2 (hope you don't mind).
Seems good so far. - The wife's asking when my grandad died though.. took a bit of explaining why I had someone elses on my phone...
Thanks for welcoming me, and I'm sure i'll be on here over the coming months.
Click to expand...
Click to collapse
On the first few pages of this whole list there is a kitchen to make your own splash screen, or even some have posted stock screens that some people pulled out, enjoy xda, it's the coolest place for your hermes.
zocster said:
....enjoy xda, it's the coolest place for your hermes.
Click to expand...
Click to collapse
it really is. but a warning to you, READ AS MUCH AS YOU CAN!!!! knowledge is power in this forum (it works as currency too)
Can I Just ask, now that i've flashed my hermes with a new rom, is it now un-locked so that I can insert sim cards from other networks in it? I was on orange UK but want to use an O2 sim in there at some point.
Cheers.
djsky123 said:
Can I Just ask, now that i've flashed my hermes with a new rom, is it now un-locked so that I can insert sim cards from other networks in it? I was on orange UK but want to use an O2 sim in there at some point.
Cheers.
Click to expand...
Click to collapse
See here:
http://forum.xda-developers.com/showthread.php?t=293665
So the answer is no, and I need to also flash something called a "Radio Rom" ?
djsky123 said:
So the answer is no, and I need to also flash something called a "Radio Rom" ?
Click to expand...
Click to collapse
The answer is "no but its easy to, by reading that topic and using that tool"
djsky123 said:
I'm wanting to get WM6.1 on my Orange (UK) SPV M3100, so i'm following the instructions at http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
My question is:
There appears to be hundreds of roms to download.
Which one should I download?
Many thanks,
Ian.
Click to expand...
Click to collapse
Dear Ian,
I cannot tell which ROM to flash because it depends on MANY things... Nevertheless i can tell you a few things thay will help you...
1. Read the Flashers BIBLE i.e. the WIKI.
2. Never, but NEVER mess or tamper with our PDA unless you are sure of what you'r doing BEFORE you do it. If your are not sure ask before.
3. Never pay attention to flames or stupid answers. You will get quite a few over here...
4. I was oncve a noob and i know how it feels to e stepingon muddy watters.
5. If you feel you get no positive answer to your questions, PM me at will and i will try to help.
Cheers, welcoe and good luck
no you need to run an unlocker not flash the radio you can get the unlocker for the hermes from here if its a g3 http://forum.xda-developers.com/showthread.php?t=293665
first of all do Hardspl, this will unlock your device too.
remember - when you flash any official rom you automaticaly erase hardspl. suggest you to try some pdaviet roms, for noob they are very nice. but if you need stability - try pda corner e.t.c. by the way - Im using spv too
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
djsky123 said:
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
When you get to a ROM-specific issue, it is best to post in the specific thread for that ROM (helps keep the forums organized and helps you get an answer more quickly)
Welcome and best of luck!
Click to expand...
Click to collapse
djsky123 said:
obaz said:
first of all do Hardspl, this will unlock your device too.
QUOTE]
I did HardSPL, so it should be unlocked I guess.
One issue i've got with CRC's 6.1 rom is that when I get an answerphone message, it only comes through as a text message showing random characters. Can this be fixed somehow?
Click to expand...
Click to collapse
6.2 is oldd.. the newest version is 11.2, maybe you should try flashing that and seeing if it is fixed.
If it keeps on, try asking in the 11.2 thread.
Click to expand...
Click to collapse
I have been looking through this forum and havent come across exactly how to install a new ROM on my t-mo dash... So I am sorry if these are dumb questions... But I do have a touch pro 2 and they explained to me how to install a new ROM on it. Is it the same concept for the Dash? Do I have to flash it with an SPL? If someone could explain all this to me it would be appreciated, or if you could direct me to a part of the forum that will assist me. I want to change the ROM on my dash for practice before I do my TP2...
I'll explain the forum has a sticky & the top take your time to read........... Does say read before posting so as to stop ?'s that are already answered........
The choice if HSPL is yours most people don't but is available in sticky, the noobs guide to flashing is there too.
Good luck.
stylez said:
I'll explain the forum has a sticky & the top take your time to read........... Does say read before posting so as to stop ?'s that are already answered........
The choice if HSPL is yours most people don't but is available in sticky, the noobs guide to flashing is there too.
Good luck.
Click to expand...
Click to collapse
I couldn't have said it better myself