Hi before my diamond boots i get a black screen with red text at the bottom right saying test only how do i get rid
Thanks
doinbox said:
Hi before my diamond boots i get a black screen with red text at the bottom right saying test only how do i get rid
Thanks
Click to expand...
Click to collapse
"test only" is a string caused by the ROM.
Is this a custom ROM, or a factory ROM (the latter could possibly be interesting)?
Anyhow, it can be removed by flashing another ROM.
I've tried flashing lots of roms but its still there.
is this the first screen you see?
Related
like i lose connection after going on the white screen?? what do i do?? because i wana get the new htc rom 1.33 and i currently have tmob wm6 which sucks...alot i just need a lil help plz to help me cid unlock it so i can put the new ROM...
and also can someone please help me find the OZ instant messenger cab??...so i can use it on the new htc rom...
On mine where it was supposed to go to the black screen with a low backlight; it went to a white screen with full backlight.
I flashed it from the white screen and it worked.
fiveohhh said:
On mine where it was supposed to go to the black screen with a low backlight; it went to a white screen with full backlight.
I flashed it from the white screen and it worked.
Click to expand...
Click to collapse
yea but the ruu doesnt find the fone it cant find the connection???
Hey there , to start off , Im pretty new to putting android and stuff on here haha. Well I finally got it to boot up android using Haret.exe , but then today I decided I wanted it fully on my system without windows...well heres the problem
I flashed the kaiser by holding the camera button and hiting the reset button...which worked fine. Well after I did that , I hit the reset button , and the AT&T symbol came up , then after a few seconds the Penguin Boot screen comes up and starts doing the weird script thing , then I hit the Dpad to install. When It come to the screen , I make sure that Both NAND things are bubbled off , then I go at it and hit install , and clear all data etc , then it goes to formatting. And after everything is complete I go to quit , then it does some more black screen script stuff and then it started booting the green weird logo ( not the android , the one for Froyo 2.2 ) and then after a few minuites it finally boots up. I then wait 10-15mins for it to finish everything once installed , and then I turn it off by battery pull ( and normal shutoff , ive tried both). then when I turned it back on , It STILL goes to the at&t logo , and repeats EVERYTHING above..please help ,I have tried everything here , and nothing seems to work.....ahhh im so confused haha.
Regards , Dread
What is the problem? Does it boot into android after that? It sounds like you are just describing what happens when android boots normally.
If it's the AT&T logo you don't like, search on this forum for splash screens, there are lots of replacements to choose from.
It boots into android after that , but when I turn it off , I have to go through the whole install screen agian and then it has all the same settings , its just very annoying
Are you pressing the D-pad and installing every time you boot? You only need to install it once....
The second time you turn it on, just don't press anything while it's booting, and it will go straight into android, with all your settings saved.
so why does it go to the weird boot text penguin screen? shouldnt android start up as soon as the phone boots? or is it supposed to be penguin screen , then android load screen?
it's not weird, all phone (and linux system) boot in this way.
Oh alright , Is there any way to make it into a bootlogo?
DreadCode said:
Oh alright , Is there any way to make it into a bootlogo?
Click to expand...
Click to collapse
Not at the moment, but right now the text screen is there to show that the phone is actively booting into Android. Once it gets to a certain point, the Android boot logo will start, and the text screen goes away.
I know it looks messy, but look at it this way. You're able to see just what the phone is doing during boot, and see that the phone is still booting and not freezing up and crashing.
He can make a splash screen, just not one to cover the kernel bootloader. I have one that got left over on ths phone after a modded wm6.5 rom. I keep it because it shows CPU, memory and ROM/radio verson in the 2nd splash.
Sent from my Not So Super Froyo using XDA App
I can put a boot image while the kernel initializes but the text will still overlap it due to framebuffer issues.
another way is set the output to a virtual terminal so is not visible.
Hey,
so I just recently bought the Oppo Find 7 (2560x1440) and just wanted to root it and install a custom ROM. When I attempted to flash another recovery it failed, I assume due to resolution issues (it only showed half of the recovery while flashing incredibly).
Then I managed to get nameless' recovery which apparently has the right resolution and could work with it. But it was already reddish / white from the get go, didn't think much of it and kept using it.
Now, when booting up the device, there's a white/red corner around the whole screen, that is supposed to be black and I can see elements from nameless' recovery.
Also flashed CM12 onto it and everything is white/red, when pressing the power button to lock / sleep the device, and pressing it again screen stays black.
Any help would be appreciated.
Problem solved. Thread closed at OP's request.
I think I bricked my phone and it is not turning on. I can see the LG logo coming up on the screen but it doesn't go beyond that.
I see some small error message on the Top left corner of the LG Logo screen. Once the that screen is off I see Blue and Red LED light blinking.
Someone please help me.
rhemanth2002 said:
I think I bricked my phone and it is not turning on. I can see the LG logo coming up on the screen but it doesn't go beyond that.
I see some small error message on the Top left corner of the LG Logo screen. Once the that screen is off I see Blue and Red LED light blinking.
Someone please help me.
Click to expand...
Click to collapse
I will spare myself from answering the question for the third or fourth time? and just quote myself.
NatusVincere said:
jerimynal wiley the error you get "secure boot error" is caused by image you are trying to boot not being bumped or not properly flashed. I assume you get this error both while trying to access recovery and OS. If that is the case you should use this guide:
http://forum.xda-developers.com/showthread.php?t=2785089&nocache=1
to flash stock firmware on your device.
But if you have a case where you are able to access your recovery (TWRP I assume) you could use one of the custom images provided here: http://forum.xda-developers.com/lg-g3/development (assuming you have D855 version) . Flash them and use them as OS.
Click to expand...
Click to collapse
hey guys i really need your help. here's the detailed story:
I've got a D855 on 5.0 that has just been recently been rooted. It's been working perfectly until just a few hours ago i wanted to try enabling the build.prop edit to enable all applications to be usable in split screen mode. so i just switched the related value from false to true, saved changes then reboot.
This is where the problem starts:
When trying to reboot, it just shows the LG logo briefly.. the LED lights just light up and switch from green to blue and loop over and over while the screen is blank.
I tried doing the factor reset on boot (power + volume down, release on power on then re-press again), but when i choose to factory reset the phone a short message on the top left appears ("Secure Booting Error! Cause : Boot Certification Error" - or something like that) then the screen goes blank and the led flashes from blue to red and on loop.
How can i go about making this thing work again?
Thanks in advance! Any help would be greatly appreciated
shameless bump
Can you get TWRP? If yes and have backup build.prop or ROM, flash it.
If not, can you get download mode? If yes flash KDZ.
kulapips said:
hey guys i really need your help. here's the detailed story:
I've got a D855 on 5.0 that has just been recently been rooted. It's been working perfectly until just a few hours ago i wanted to try enabling the build.prop edit to enable all applications to be usable in split screen mode. so i just switched the related value from false to true, saved changes then reboot.
This is where the problem starts:
When trying to reboot, it just shows the LG logo briefly.. the LED lights just light up and switch from green to blue and loop over and over while the screen is blank.
I tried doing the factor reset on boot (power + volume down, release on power on then re-press again), but when i choose to factory reset the phone a short message on the top left appears ("Secure Booting Error! Cause : Boot Certification Error" - or something like that) then the screen goes blank and the led flashes from blue to red and on loop.
How can i go about making this thing work again?
Thanks in advance! Any help would be greatly appreciated
Click to expand...
Click to collapse
You need to download a KDZ file for you D855 from a site or XDA thread
Then use the LG tool to flash the KDZ and then your phone should work as it worked before. I've had this issue before. Fixed it this way
_SDroid said:
You need to download a KDZ file for you D855 from a site or XDA thread
Then use the LG tool to flash the KDZ and then your phone should work as it worked before. I've had this issue before. Fixed it this way
Click to expand...
Click to collapse
thanks, yeah it was the only way i was able to bring it to life.. was able to fix it yesterday by using the TOT method.
Another question: it seems that after flashing the TOT file (i used the UK version), i can't enable LTE anymore. when i try to enable via settings, the signal just disappears. when i go back to the home screen, it gets restored but only up to "H/3g", and when i go back to settings it goes back to GSM/WCDMA.
kulapips said:
Another question: it seems that after flashing the TOT file (i used the UK version), i can't enable LTE anymore. when i try to enable via settings, the signal just disappears. when i go back to the home screen, it gets restored but only up to "H/3g", and when i go back to settings it goes back to GSM/WCDMA.
Click to expand...
Click to collapse
You need to change your APN settings. Look on google for the LTE APN settings for your provider
_SDroid said:
You need to change your APN settings. Look on google for the LTE APN settings for your provider
Click to expand...
Click to collapse
thanks, went ahead and installed a custom rom on top of it and it fixed now.
kulapips said:
thanks, went ahead and installed a custom rom on top of it and it fixed now.
Click to expand...
Click to collapse
Could somebody go over this KDZ stuff? I never used it before. I have a G3 850 with a black screen. It will boot, I get sounds but no visual anything except for LED, it flashes blue and green.