Develop Bugs

upgrading x01ht SB extrom without locking the phone

Hello,
thanks a lot to all of you for the nice job you've been doing! I'm living in Japan and using a SB x01ht that was bought just after launching around october 2006. I'm still using the original version with bootloader 1.06, the only thing I installed was Asukal's english MUI. I haven't upgraded to the new extrom but now I need to have access to data communication. Can you tell me how can I do without simlocking my phone?
Tks and cheers,
Greengaijin

changing rom dont simlock phones

okay rudegar. tks for the reply!

Hey Rudegar,
sorry but I'm a bit confused after reading Pof's FAQ regarding his unlocker for Hermes phones...
"Q: Will this work on Post April (white) SoftBank X01HT phones?
Yes if you have not let the SoftBank ExtROM install, otherwise your radio bootloader has been upgraded to 0182 and it is not possible to flash a radio or remove the SIMLock."
How come the ExtRom can lock the phone in the above situation?
Tks again,
Euler

[B]changing rom to mda compact iv unlock[/B]

first i need patient man
i have new mda compact iv unlock
i read alitle in this forum
i know that i must make hard-spl before i chang to any rom
how can i know is my phone is hard spl or not
this is my phone info
rom verison:1.37.110.3 wwe
rom update 6/20/08
radio version: 1.20.olinex
security unlock
diam200 mfg 64m
spl-1.40.olinex
microp-diam (LED)v11
PSOC-vict stage_pvt v0x20
what i want is steps for chang my rom
plz no one write link, if u want to helpe me read my phone info
and tell me what must i do in steps
is i need hard spl or not
and coman rom and radio not the best
to use it with first operation
it's first time with WM

unknown83 said:
first i need patient man
i have new mda compact iv unlock
i read alitle in this forum
i know that i must make hard-spl before i chang to any rom
how can i know is my phone is hard spl or not
this is my phone info
rom verison:1.37.110.3 wwe
rom update 6/20/08
radio version: 1.20.olinex
security unlock
diam200 mfg 64m
spl-1.40.olinex
microp-diam (LED)v11
PSOC-vict stage_pvt v0x20
what i want is steps for chang my rom
plz no one write link, if u want to helpe me read my phone info
and tell me what must i do in steps
is i need hard spl or not
and coman rom and radio not the best
to use it with first operation
it's first time with WM
Click to expand...
Click to collapse
It's first time with WM? We are helping you by telling you to read. All this stuff is quite easy and there is little chance you will brick your device.
Every day we get some new person in here saying "give me step by step". Step-by-step is already available in the stickies; we gave step by step so many times. Try searching. I don't mean to be a jerk about this, but you've asked the same questions in prior threads that you created. Help is not likely if you're impatient. Impatience is what is likely to brick your phone.

You already have one thread going about this issue. Try to stick to it, and don't spam the forum.

Which Hard SPL version use for SPL1.93.0000?

Hello everyone
I read all sticky postes in this forum, it's very usefull for me but i have still sonme questions.
I just bought my diamond with SFR bundle (a french tele operator) and i got following infomation in 3 colors screen:
DIAM 100 64M
SPL_1.93.00000
MicroP_Diam(LED) V11
PSOL_Diam STAGE_PVT v0x32
In the bible, it suggest "Hard-SPL 1.40 Olinex SIGNED" and in another post it suggest Hard-SPL 1.93
In my case which version is the better one?
the second question would be if i have any fatal errors during SPL installation, it is possible to return the original SPL?
sorry for my english
thx in advence

As long as it works, it doesn't really matter which one you use was the original instructions from the thread.
I personally like Hard-SPL 1.93 and since your device is already 1.93 SPL....then just use that one.

My Diamond came with the 1.93 SPL too. I'm using the HardSPL 1.93 Unsigned solely on the fact that it is the latest version of the SPL, meaning quicker booting, and maybe other small tweaks.
I'm really unsure why so many people use the 1.40 as it's dated compared to the 1.93 isnt it.

I have a similar question,
I have 2.03 ROM with stock 2.03 SPL, what would be my best choice?
I think i've read somewhere somebody had problems with installing Hard-SPL on 2.03 rom and replacing 2.03 spl?
Cheers.

thank you for responses
I'am still searching which would be the best conbination, there is to much choice....

Need to load back SPL-2.03

Ok all expert here i want to ask a question. I want to send my diamond for a repair that still in warranty. before this i've load olinex unsigned 1.93 spl. but when i reflash to original official 2.03 rom the spl is still the same and not the 2.03 version one. I've done using the nbhutil to extract the spl module from official rom and make it an nbh format. but when i flash the spl only it still the 1.93 version. how is this happened?
**do u really think that they will check for the spl version before repair instead of official rom loaded? i'm afraid just because of the spl version is not the official one will void the warranty.
please help me. sorry for poor english.

Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699

mrm2007 said:
Hi,
Flash a stock rom. Stock rom thread (it will update your spl, radio, flash):
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
I already flashed to the stock 2.03 rom but when i check the bootloader version its still spl-1.40 olipro. before this its spl-2.03. so how?

Your SPL is Hard-SPL, meaning: write protected. You can only overwrite it using Soft-SPL (= SSPL). Search and you'll find it.

I had to return my handset and returned to different official ROM and SPL than supplied by the operator. So I would suggest to use 1.93 for both check this post/thread. Once you have your phone back to 1.93 for both SPL and ROM - Load your 2.03 ROM which should update the SPL too.
http://forum.xda-developers.com/showpost.php?p=2324837&postcount=20
Check the top of the same thread too HERE

if you search ( ReStore Hard SPL ) you can see my post about your problem

Hello, and everbody hello,
please tell me, is it possible people from company where i buyed HTC diamond
Diam100 64m
microp-diam (led) v11
psoc-diam stage_pvt v0x32
to discover, am i changed STOCK SPL to HSPL unsigned, when i back to STOCK SPL uploaded in post #20 , i'm not sure which one from that post to use ?
1.34, 1.38 , 1,93 or ?
I'm not sure what was originally - stock SPL which came with my phone , i sent mail to HTC support to ask him, do they know to tell me over S/N what was first originally SPL on my phone, but they tell me all information what they have, but not 1st version of SPL.
Information are like this
SN :HTxxxxxxxxxxx IMEI :xxxxxxxxxxxxx Part Number :xxxxxx-00 Part Description :SKU,HTC,Swedish,SWE,UMTS 900/2100,Cut,Black,Diamond-XX,w/oSIM LockSIM Lock Customer Name :xxxxxxx : HTC Model DIAMOND-XX
this phone is buyed in Sweden, and my problem is, i don't know what version of STOCK spl from post #20 to use for warranty, cause i have to send my phone in service for repairing, but what Stock SPL to use, for no discovering from people which work in repairing service?
I remember version of stock rom was 1.93 Swedish, one before latest, but for SPL i'm not sure, maybe 1.34 or 1.35, i scarried they will discover me, i used HSPL, and i don't know what stock SPL to put on my HTC for warrant and no discovering about using another SPL-s like HSPL , unsigned,signed etc..?
Tnx in advance everbody for help!
God bless you
Greetings
p.s.
Phone is buyed - unlocked, not signed for some mobile operator or similiar! It came just with stock ROM - 1.93 swedish, and maybe 1.35 spl or maybe 1.93, it's buyed before 1-2 month, maybe that will help me to discover which was stock SPL, and which one i have to use for warranty?

please somebody help, cause this is urgent for me, i have to send phone in service today
tnx in advance,
greetz

flashing with bootloader

Hi everybody,
Before I ask you a question I would like to tell you that i searched in our forum for this question so many days but what I found doesn't help me.
So I will be thankful if someone take the time to answer me:
I have a HTC artemis and I cannot make it work again. In fact, I never flash it before and it was a gift for my birthday. I tried to flash it with a rom but the problem that I can't use the activeSync. the PCC doesn't work and only I can use the bootloader. Then I tried to use the USPL because the original rom is locked but it doesn't work because the USPL works need a connction with activeSync to The PC too .
I don't know what I could do?? please help me
The configuration of my HTC:
IPL 3.13.0001
SPL 3.13.0000
OS 3.13
GSM 02.94.90
Rom 3.13.406.1 FRE
Rom ext: 3.13.406.102
Thank you very much ...

Hello,
Please, there is no answer? I m in very bad situation and I'd like to do something to my HTC Artemis.
please help..

hi,
please my question is:
- can I use USPL without activSyn and using only the bootloader mode?
- if not, how can I flash my HTC artemis directly using bootloder?
My problem is that my actual rom is locked and I can't connect it to my PC with the activSyn.
Please heeeeeeeeeeeeeeeeeeeeeeeeeeelp

I had the same problem with my i-mate jam. You should download another flash update tool and try it again. It worked for me.

Hi,
finaly someone replies for me. Thank you.
Please how can I know the original ROM for my phone? using this configuration can someone know it:
The configuration of my HTC Artemis:
IPL 3.13.0001
SPL 3.13.0000
OS 3.13
GSM 02.94.90
Rom 3.13.406.1 FRE
Rom ext: 3.13.406.102
A Final question: can i flash this original ROM without activSync? it means using bootloader only?
thank you a lot..
Houssem

pleeeeeeeeeeeeeeeease help