After i updated my universal, i pressed the buttons for hard reset and it is trying to start and gets stuk at logo screen where it displayes the radio version ext rom version etc..
i did this many times before and never got this problem...
i even tryed to do a new update using another rom, tomal v8.2, which worked for me before and got the same problem
what did i do wrong and what should i do to fix it??
please help me..
bratuadrian said:
After i updated my universal, i pressed the buttons for hard reset and it is trying to start and gets stuk at logo screen where it displayes the radio version ext rom version etc..
i did this many times before and never got this problem...
i even tryed to do a new update using another rom, tomal v8.2, which worked for me before and got the same problem
what did i do wrong and what should i do to fix it??
please help me..
Click to expand...
Click to collapse
did you solve the problem?
i have the same and dont know what to do
Try to reflash, is same problem do doc format
Info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Hi,
i've been searching this forum all day now, and i haven't found a post for my problem. I've been using schap's rom for a few weeks now and yesterday, when i got in my car and put my hermes (t-mobile vario II) into the charger it resetted and it didn't boot anymore. the dark screen comes up (the one with the red numbers) and it goes into the next screen but thats it. I even left it that way for an hour but still no working phone...
Can anybody please help me out? i'd hate it to go back to my old nokia...
HELP!
thanks in advance
Have you tried a hard reset? Also, my phone got stuck there once, and hitting the little reset button on the bottom of the phone got it to work.
I did try a hard reset several times.. still the same problem...
please refer to the unbricking thread here: http://forum.xda-developers.com/showthread.php?t=286755
You will find all the info you need in that thread.
Fixed it!
Hi!
Well i did fix it all right! (happy happy joy joy)
I don't know what went wrong, but i made myself a nice new rom with pandorras kitchen (hermes style) which i installed via the SD card using this info: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Thanks for that!
you could also fix that problem by installing Hardspl7 , it happened with me twice i don't remember with what rom , but it happened and fixed using HardSPL7 .
WBR
Hi
I'm using deepshining rom version 8.0 for a while with no issues
yesterday i tried to install the new 8.2 version and since than i have the same problem even with different rom.
The problem is that after i'm using it for awhile , after soft reset the phone shows the very 1st setup screen of the rom and all the configuration and installations are lost !
Has any one had the same problem ?
Thanks
David
I've got the exact same problem, and never really got around to working out how to avoid it!
How are you doing a soft reset?
Using the red reset button/pressing the power button and turning it back on/using a shutdown program???
Did you use Mtty before installing the new ROM? If not, go here http://forum.xda-developers.com/showthread.php?t=540290
It happens on soft reset, no matter how it performed.
I'm checking the posted link regarding Mtty
Thanks guys !
I flashed my Asus p320 with win mobile 6.5 it worcked but the first time i reset the phone it got stuck in bootloader..
i already tried reflashing with original rom and some cooked roms but stil wont boot...
i need some advise please
is my phone dead? what should i do to get it to boot?
check the hardware buttons..may be one of the buttons have problems
hello
i hv a p320.
it shows a booting screen with btlr 3.1 only.
it is also not possible to update the rom from memory card as it shows 3 images found and then does nothing.
plz help.
hdubli said:
check the hardware buttons..may be one of the buttons have problems
Click to expand...
Click to collapse
Hello,
I'm a user from bangalore, actually i'd been using hdubli's custom rom, but when i was flashing, suddenly the phone got hung, and it doesn't go any further.
so i went to asus service center and checked wit them, they tell me that board is screwed, its now showing only bltr 3.1 and it doesn't go any further......
Please wn\oul'd any one tell the solution for this?
Thanks!
I've got a little problem :/ few flashes ago i started experiencing problems with my diamond. some times when it freezes and i reboot it it was restoring itself to defaults. now i installed new radio and new rom. it was ok for 3 days. now it only boot itself to screen where it says "touch diamond" and numbers about rom. my pc don't see my phone, vol. down + reboot dont work :/ help pls
try to enter into bootloader mode and flash a new rom
DilosPL said:
I've got a little problem :/ few flashes ago i started experiencing problems with my diamond. some times when it freezes and i reboot it it was restoring itself to defaults. now i installed new radio and new rom. it was ok for 3 days. now it only boot itself to screen where it says "touch diamond" and numbers about rom. my pc don't see my phone, vol. down + reboot dont work :/ help pls
Click to expand...
Click to collapse
Might be a problem with your radio. Can you provide more details about your unit, ie:
What version is your SPL/HardSPL?
What version is your radio?
What ROM are you using (OS, etc)?
Did you try to remove the battery for a lot of time?
I have two solutions
DilosPL said:
I've got a little problem :/ few flashes ago i started experiencing problems with my diamond. some times when it freezes and i reboot it it was restoring itself to defaults. now i installed new radio and new rom. it was ok for 3 days. now it only boot itself to screen where it says "touch diamond" and numbers about rom. my pc don't see my phone, vol. down + reboot dont work :/ help pls
Click to expand...
Click to collapse
I also had this problem, and i have two solutions, maybe can help you :
1. On your phone: simultaneously press the volume down and reset to get into boot mode.
Once you have managed this, follow the instructions on the screen of your computers with installation of rom.
2. Possibly you do not succeed the first step, obtain a version of HardSPL Diamond, .nbh or ROMUpdateUtility.exe, and running, with the phone connected to PC and in mod boot loader.
IMPORTANT I recommend :
" Try to get HardSPL-1.24 " , ( versions of HardSPL which are in atachament I have not ever installed on the my HTC Touch Diamond, because already have the HardSPL-1.24 on my phone )
Should work, good luck and more attention next time.
THX!! i reinstalled my hardspl to 1.30 and then i was able to reinstall my rom ^^ and it works
nope :/ still restoring to factory after freeze and reset :/
DilosPL said:
nope :/ still restoring to factory after freeze and reset :/
Click to expand...
Click to collapse
use MTTY then flash the Hard SPL 1.40 then flash the rom you want
Yep random soft/hard resetting is a sympton of MTTY necessity!