I need some files from the ipaq 111 rom (already have the nbf file), but I don't know the command line parameters to do it. Can someone enlighten me on how to do this and which command line parameters to use?
Steven,
How did you extract the ROM image? Do you know how to get the 111 in bootloader mode?
I am thinking that the 211 would use a similar process so that is why I am asking....
I'm trying to figure out how to extract the rom image, that's why I posted this thread. No, I do not know how to get the 111 or 211 in bootloader mode.
Related
Hi,
I made the mistake to buy JasJar in Italian and now I'm late for all upgrades. There's the possibility to change language into English?
Thanks
Stefano
sure ... try the new qtek 9000 rom
I've tried
Hi, I've tried with WWE Rom but installing I get an error due the different language.
Thanks for help me.
By the way....
.... I've not qtek but Imate JASJAR.
Thanks
here you have a step by step
http://forum.xda-developers.com/viewtopic.php?t=29354&highlight=
I'm unable
Hi I've done:
1. get the JASJAR_WWE_11353_137_10301
1a. get the exe from the zip file - if needed
1b. unzip the exe file to a directory
1c. place the enclosed file MaUpgradeUt_noID in the directory
1d. run the upgrade
At this time I recieve a message that says me:
ERROR 120: CONTRY ID ERROR
The ROM inage that you're trying to use is not designed to work on your device. Please check the vender Web site and download the correct ROM update.
What I can do?
Thanks
run again the
MaUpgradeUt_noID for the upgrade
I'm sorry to disturb you but I?m not able. I've tried to run MaUpgradeUt_noID but appear a message saying me that is not possible run the selected application as RUU.dll was not found.
I've copied MaUpgradeUt_noID in the same directory of the ROM file. Is that right??
Thanks and sorry.
May be the problem is:
1b. unzip the exe file to a directory
Is posible to unzip to a directory? I run the .exe file and I see that file decompress but I don't know where.
The problem is that I put MaUpgradeUt_noID in the .exe directory and due to that I have error message.
is there a program that unzip an exe file?
Thanks
Download winrar. Right click on the file and select "extract to...."
Can you please backup the content of the "windows" directory before upgrading? It should contain all the certified .mui files for the italian localization already signed and ready to work in the wm5 jasjar environment. Then put a zip file in the upload area of this forum. I would like to experiment a little bit with the italian localization.... 8)
I just performed the upgrade without any glitch.
Now I have the last english.ROM
Now the only problem is that special symbols on the keyboard are wrong.
I'm sure there is a registry hack that switches the keyboard back to my italian keyboard (I have an italian JasJar).
Do you know what key should I change and what value should I put there?
Thanks a lot,
Francesco
Was not possible to copy
Dear Topogigi,
Thanks for the suggestion about winrar. Now is OK.
I was not able to copy the windows directory as I get some error copying. Sorry.
Ciao
DONE!!!
Dear all, I got it!!! THANKS FOR YOUR HELP.
Now I've a small problem: Keyboard. Italian KB has differente layout than WWE. There's way to solve this problem? For example, @ is FN+Q and in WWE is FN+2...
Thanks for all!!
How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure
Auredelrio said:
How it works exactly?
if upgrade WM6 Asus P535 wrong (cheksum error, update fail), we need one nb0 file for repair
we make nb0 file with this program (P535RomTool) and the file incluided in the upgrade (AsusP535.cap)
The command is C:/P535RomTool -d6 AsusP535.cap
and both files (the program P535RomTool, and the file, AsusP535.cap)is in C:
but answer is: can not open file destination
what´s wrong?
Thanks
Aure
Click to expand...
Click to collapse
is it for change rom???
i need to change from spanish to italian....
can u help me?
thanks
...and I need to change it from French to Spanish. The Spanish update provided by Asus doesnt work "in the device's version"
hello. i have problem
i try to change rom installation type from BIN to NBF
i compile nbf and this works good, but when i put nbf to folder with ROMUpdateUtility and i upgrade my phone, installation always stuck on 75 %
original rom have 32mb, my rom have 39 mb
what i must to do? modify ROMUpdateUtility.exe? if yes, how to do it?
ps. it's going about hurricane device (aka c550, qtek8200)
thx for answer
Hello,
I am trying to extract OS from a NB0 file, in order to be able to repack this image in a NBH, which will be flashable using the SPL 1.11 trick.
My problem is I don't know how to extract data from NB0 file. Can someone help me?
StefanSki
hi
I am using windows mobile 6.1 on my asus p525 and want to change it to wm5.
I copied the cab file and autorun file.
when i run the file and click system/ROM Update it says, "cannot find the extended ROM partition".
how can i solve this problem?...
You cannot use the official method for restoring back to WM5.
You have to extract the nb0 file from the cap, then use the emergency flash mode to flash back to WM5. (Note: You need to flash 2 times in order to get the partition size correct)
how can I extract the cap file?
should I use vivi's P525 kitchen?
waiting...
wrong entry...
i tried something=)
i used the kitchen and it made 2 nb0 files. their names were rom.nb0 (37mb) and romfile.nb0 (41.5mb). i changed rom.nb0 to galaxy.nb0 then pushed camera record and reset. it installed windows mobile 5=)
is there anybody knows how to change the language?