Locked in bootloader mode - Upgrading, Modifying and Unlocking

Have Imate PPC. Upgraded to WM 5. Does not work for me. Tried to reinstall Windows 2003. Got error message " Incorrect ROM". Left PPC in boot loader Mode (Screen says Serial-v1.06) Cant get out or hard reset. Where do I go from here?

Locked in bootloader mode
Sorry, false alarm. Dont know why but device would not except new ROM. After several attempts it did. Everything is great now

Related

ROM Upgrade problems - Device dead? HELP please.

I am a rookie at upgrading this stuff. I have a QTEK 9000. I got UNI_QTEK_13077_176_10900_WWE_Ship.exe from the ftp site.
1) Did a device reset.
2) Connected via active sync.
3) ran the program.
After a short period, The device shut off and active sync disconnected.
The screen is black. On button does not work.
I tried a hard boot and I get the boot menu and 0 or x does not seem to do anything.
Did I do something wrong? What now.
GaryK2 said:
I am a rookie at upgrading this stuff. I have a QTEK 9000. I got UNI_QTEK_13077_176_10900_WWE_Ship.exe from the ftp site.
1) Did a device reset.
2) Connected via active sync.
3) ran the program.
After a short period, The device shut off and active sync disconnected.
The screen is black. On button does not work.
I tried a hard boot and I get the boot menu and 0 or x does not seem to do anything.
Did I do something wrong? What now.
Click to expand...
Click to collapse
I think that program is supposed to be run after you've removed USB from the connection methods in activesync - i.e. you're not connecting via activesync, even though the device is physically connected.
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
GaryK2 said:
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
Click to expand...
Click to collapse
Hehee... when you get the new rom on, you'll love it...
GaryK2 said:
OK, I tried the process again without activesync.
That seems to be the answer. ROM Is now installed. I just have to finish up.
Thanks alot,
That scared the hell out of me.
Click to expand...
Click to collapse
Sorry for my silly question but how can you process it without activesync, mean you have removed activesync form your conputer?, because my activesync is automatic running when the computer start up
Thanks,
Orangevn
orangevn said:
Sorry for my silly question but how can you process it without activesync, mean you have removed activesync form your conputer?, because my activesync is automatic running when the computer start up
Click to expand...
Click to collapse
You're just telling AS to ignore the Exec when it's connected. The PC itself still sees it and adds a driver on connection. So you're not removing AS from the PC as such.
i have same problem but it doesn't work
please help me....this phone is dead now:-(
Re: i have same problem but it doesn't work
bmlsbr said:
please help me....this phone is dead now:-(
Click to expand...
Click to collapse
Did you try the AS thing above?
First off what do you on the screen of your device when you turn it on? Is it in boot loader screen, a black screen with text that says boot loader mode and serial?
If it is in boot loader screen and it says serial on the bottom, when you plug in the USB do you see the "serial" text change to "USB"?
I had this problem with mine. I upgraded my Qtek9000 with the new orange ROM and when the process finished I was still in the boot loader screen and could not get out of it. I had to re-flash it back to the Original Qtek ROM which revived the devices. I then started the ROM upgrade process all over again which resulted in a successful flash.
If you can answers some of the questions above I can try to help.
BTW, the upgrade process takes about 20-25 minutes. if it was any less then that you unplugged the device to early.
Plug device in.
• Start ROM upgrade process.
• The device will turn off and go into boot loader mode (the computer will lose connection to the device and unrecognized USB devices error will appear in your task bar).
• Wait until the device reconnects to the computer and the ROM upgrade starts.
• This process will take 20-25 minutes.
• Reset the device with option 0 (erase all data)
• The device will boot normally and go through the extended ROM application installs. It will ask you to reset again.
• After the second reset you are done.
xda exec upgrade (dead phone)
tHIS ALSO HAPPENED TO ME (IT WAS PRETTY SCARY) . i DISCOVERED THAT I COULD GET IT LIVE BY PRESSING THE LIGHT BUTTON THE POWER BUTTON AND THEN SOFT RESET (THIS IS THAT BOOT MODE) .
THEN I RE-CONNECTED TO MY PC AND RE COMMENCED THE UPGRADE...WORKED FINE. I HAD ACTIVESYNC RUNNING WHEN I DID THE INTIAL UPGARDE, PROPBABLY THE PROBLEM!! :wink:
none of this worked....may be I am not doing it right
when I try to add hard-reset all I get this is this:
"press 0 to restore factory default"
"press X to exit"
When I run the rom update, I get device connection problem error message and sometimes the country id error message.
none of this worked....may be I am not doing it right
when I try to add hard-reset all I get this is this:
"press 0 to restore factory default"
"press X to exit"
When I run the rom update, I get device connection problem error message and sometimes the country id error message.
my yahoo and msn id is bmlsbr...please someone chat with me and provide some help. I feel helpless after spending all the money and the phone dead after i day of use.
please...........
here is what I am getting
I can not turn my device on at all.
I'm unclear to what you are saying. First you tell us that the device does not turn on. Then you say you are getting the 0 X option. Which one is it? If you are getting the O/X option what do you see on the screen when you press 0. Do you see the device in boot loader mode? You might have to remove the battery and try the reset button after. my experience has been when the device is in boot loader mode I cannot turn it off. It always stayed on. So you might want to charge it just to make sure you have full power. I would also use the ROM loader without the country and device ID restrictions you can download it from the FTP site.
QTEK 9000 DEAD
I was always able to get the hardware reset menu..but nothing happened beyond that.
Now the phone is working after multiple tries to put the rom. But active sync won't work. Any clues????
What do you mean by works? Did you load the ROM?
Have you tried to follow these instructions:
http://forum.xda-developers.com/viewtopic.php?t=43592
Seems to work for a few people.

Tried to upgrade from WM5 to WM6 and now my excalibur starts in tricolor mode!!!

I'm the newbiest of them all, I think I bricked my brand new Excalibur!!!
Sorry if I'm posting in the wrong place, but I need heeeelp!
O.K., here it is:
I just downloaded kavana's 080314 WM6.1 installer for the HTC Excalibur, I ran the exe and followed instructions, afterwards, the ROM app opened and started upgrading the phone but it got stuck at 1%, it made be go thru the recovery process several times (unplug, turn off, disconnect battery, turn on) but it always started on tricolor mode and always got stuck on 1%, after a third recovery process the ROM app just quit and left me hanging on tricolor mode!!!
Activesync won't connect now, I try to run kavana's exe again but it doesn't recognize the phone either, the phone is on, conected (windows makes the usb sound for connection) but it is not recongized, it's as if it's not plugged.
It is stuck on tricolor mode and I don't know what to do!
Please help me!!!
Try the dicussion thread "Bricked my T Mobile phone" there are plenty of answers there.
Will this work?
I saw this on said thread, but I presume it applies for a Herald phone, will it work?
The tricolor mode is "bootloader mode"?
Isn't there some sort of restart that can fix it?
Can someone elaborate on this? I'm really a super-noob!!!
"Try a SD card flash to unbrick your device
This is how:
MAKE SURE THE HERALD IS FULLY CHARGED BEFORE STARTING THE PROCES
#01 Download your original RUU
#02 Download (if not yet installed) WinRar and install
#03 Copy your full sd micro card to your harddisk and format your card with FAT 32
#04 Rightclick the downloaded exe file with your original RUU, click Unpack here
#05 In the map the will be created you will find a file (or similar) called RUU_signed.nbh. Copy this file to your formated sd microcard.
#06 Rename the file to Heraimg.nbh
#07 Get your Herald into bootloader modus by pressing the comm manager button and the camera button and pressing the reset button at the same time. Do not release both buttons until your in bootloader.
#08 Once in bootloader pop in your sd micro card.
#09 As soon as your card is popped in the screen will say something like "Reading SD card". Wait it out till it says "Push button to start" and slide the indicated volume slider down.
#10 The Herald will start the flashing proces. Wait it out till it says "Press any button" and hit the send button.
#11 Perform a hard reset
#12 Voila! Your back in business"
velascoperroni said:
I'm the newbiest of them all, I think I bricked my brand new Excalibur!!!
Sorry if I'm posting in the wrong place, but I need heeeelp!
O.K., here it is:
I just downloaded kavana's 080314 WM6.1 installer for the HTC Excalibur, I ran the exe and followed instructions, afterwards, the ROM app opened and started upgrading the phone but it got stuck at 1%, it made be go thru the recovery process several times (unplug, turn off, disconnect battery, turn on) but it always started on tricolor mode and always got stuck on 1%, after a third recovery process the ROM app just quit and left me hanging on tricolor mode!!!
Activesync won't connect now, I try to run kavana's exe again but it doesn't recognize the phone either, the phone is on, conected (windows makes the usb sound for connection) but it is not recongized, it's as if it's not plugged.
It is stuck on tricolor mode and I don't know what to do!
Please help me!!!
Click to expand...
Click to collapse
I believe you didn't application unlock it first. I had same issues. I finally got it to load. I don't think you bricked it. Remove battery wait a few seconds and restart phone
timothyjok said:
I believe you didn't application unlock it first. I had same issues. I finally got it to load. I don't think you bricked it. Remove battery wait a few seconds and restart phone
Click to expand...
Click to collapse
Already did that... still on "brick" mode...
Question: is my warranty still valid? I bought it 3 days ago.
you can solve simply to launch original upgrade to wm6 rom
glenbo said:
Try the dicussion thread "Bricked my T Mobile phone" there are plenty of answers there.
Click to expand...
Click to collapse
Do try these procedures first. I'm just throwing it out there but if you try again it is probably a better choice to flash to WM6 first. Then try flashing to the 6.1.
I'm sure you can return it but come up with a believable excuse.
Yes, You Are Correct!
pfunkside said:
Do try these procedures first. I'm just throwing it out there but if you try again it is probably a better choice to flash to WM6 first. Then try flashing to the 6.1.
I'm sure you can return it but come up with a believable excuse.
Click to expand...
Click to collapse
Yes, that is the correct path for him to take, install a 6.0 ROM first, before installing a 6.1 ROM. I suggest he install the T-Mo official wm6, just to get things started in the right direction again.
(1) If the device is still in the tri color mode (bootloader mode), that's a very good sign, it's not bricked. Connect the device to your PC via active sync in the tri color mode, you may think that the device is not connected to Your PC but it is, it may not look like it's connected, run the official T-Mo wm6 ROM RUU WWE, it will install on your device as long as your device is in the tri color mode.
(2)Once you get the wm6 ROM installed on your device, you must first SDA_ApplicationUnlock your device, next you want to Certificate AppUnlock and SurrealApplication Unlock your phone. Now, the reason you are doing all these unlocks are because you coming off the T-Mo wm6 ROM.
(3)After all this have been done, it now ok to try to install the 6.1 ROM on your device.......!
Great support!!! But now comes the obvious question from the n00b of the n00bs!!!
Got it, now the big question is: how to flash to WM6?
Is it done by the steps I posted early? (formatting SD, etc.)
Also, where do I get the T-mobile RUU?
Finally, there are a few things you should know, my phone was bought in Mexico, under the cellphone company Movistar (Spain's Telefonica and I've heard U.S. AT&T), it had WM5 before I "bricked" it (hehehe).
When I turn it now, a few miliseconds before the tricolor screen I can read in the phone a "waiting for SD card" message when the tricolor screen comes on, I get this version of RUU 1.15.000.
I appreciate all your help, as a contribution to this amazing community, when I get thru this, I hereby commit myself to write a fully understandable guide for noobs with the same problem (not too long).
T-Mo Wm6
velascoperroni said:
Got it, now the big question is: how to flash to WM6?
Is it done by the steps I posted early? (formatting SD, etc.)
Also, where do I get the T-mobile RUU?
Finally, there are a few things you should know, my phone was bought in Mexico, under the cellphone company Movistar (Spain's Telefonica and I've heard U.S. AT&T), it had WM5 before I "bricked" it (hehehe).
When I turn it now, a few miliseconds before the tricolor screen I can read in the phone a "waiting for SD card" message when the tricolor screen comes on, I get this version of RUU 1.15.000.
I appreciate all your help, as a contribution to this amazing community, when I get thru this, I hereby commit myself to write a fully understandable guide for noobs with the same problem (not too long).
Click to expand...
Click to collapse
Is your mobile device still in the tri color mode, if so just connect it back to your PC via active sync, It will accept the download! OK you can get the T-Mo wm6 at T-Mo's website, if not I will send you a link with the T-Mo wm6 RUU. Don't panic, you are still in the game.......!
Update!! Phone unbricked but still on WM5!
Ok... I used this ROM: HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe
It went thru the upgrading process but got stuck at 3%, anyway, it finished with a message like "this ROM cannot be used for your phone" or something and restored WM5.
Now I will follow instructions on the thread: "The Full Guide To Upgrading From Windows Mobile 5 to 6" and I'll be posting my acomplishments on this thread.
Question: The reasons for me not being still able to upgrade may be:
1. I haven't unlocked phone,
2. My phone is for Mexico and cellphone co. "Movistar", or
3. I'm running Windows XP as a virtual machine (via parallels) on an intel Macintosh and somehow there's a problem with the USB drivers.
I'm rooting for option 1 (but kavana's upgrade was supposed to already unlocked it). Option 3 maybe but then, why do I get Activesync to run? Option 2 would be a bummer!
T-Mobile WM6 RUU WWE ROM
Get the T-Mobile official Wm6 RUU WWE Rom here http://www.mediafire.com/?0vtw32zmuz3 ......!Oh! I throught you had a Excalibur.....!
Just can't seem to upgrade WM5 to WM6!
Iv'e tried the T-Mobile ROM and the HTC ROM and I get an: "invalid vendor id"
I tried every step on the aforementioned thread, even de CIS unlock, and still no luck... again, my vendor is movistar/telefonica/cingular.
Any thoughts?
Your Answer Is In jockyw2001 Thread
velascoperroni said:
Iv'e tried the T-Mobile ROM and the HTC ROM and I get an: "invalid vendor id"
I tried every step on the aforementioned thread, even de CIS unlock, and still no luck... again, my vendor is movistar/telefonica/cingular.
Any thoughts?
Click to expand...
Click to collapse
A easy frix, but read the instructions very carefully, jockyw2001 thread is located in the sticky section. What you are looking for will be in post #1.........!
New Instructions
Run the Excalibur Uspl-CID ByPass.zip, extraxt on your PC and open it there, you will see several file folders. Open the one that say (uspl) MS-Dos batch File, follow on screen instructions by pressing any key. This time when you see the white screen on your device do not panic! Run the HTC WM 6 ROM, this is done while the screen is still white on your device. Just follow the on screen instructions on your PC.............!
Now I definitively bricked it!
I ran the CID unbloker, screen went blank, ran the ROM, it got to 16% and made me do a recovery, after the recovery it gave me the same "invalid vendor id" message and it automatically restarted the phone, but...
The restart stopped at the HTC intro screen!! I've restarted it several times and it just stops on the first HTC logo screen... even a hard reset won't fix it!!!
HEEEEEEEEEEEEEEEEEELP!!!
Here is a visual aid.
You are not reading into detail. Use the Tmobile rom instead of the HTC Rom.
http://forum.xda-developers.com/showthread.php?t=368998&highlight=Jamerican
Still Bricked!!!
Yeah!!! superb visual aid!!!
I just wish I had seen it before I bricked it!!!!
This is the current state of my phone: I press power, I see a white screen with the HTC logo in the middle, the phone vibrates, still the same HTC logo... and it is stuck that way! I can't turn it off, I have to take out the battery!!
I've tried a hard reset, same thing happens! It stays stuck on the HTC logo screen and I'm forced to pull the battery out for the phone to shut down.
It is obviously not recognized in any way when I plug it to the PC's USB.
What made this happen? HTC Generic ROM got stuck on 16% before telling me "invalid vendor id", restarted the phone and voila: brick!!
Boy, I wish I was back in the tricolor mode!!!
IS THERE NOTHING I CAN DO?
I'm seriously thinking about going back to the vendor on monday and saying: It was like this when I woke up (I just bought it three days ago!!!)
If it gets that far, it doesnt seem totally bricked, ima PC man, so this may be off, but it seems like some kinda bootloader error on the phone itself....IE, the HTC screen is all that the bootloader tells the phone to load. Have you tried forcing the phone into bootloader mode?
I Looooooove Google!!!
OK... I found a turnaround for the problem... got it to go to bootloader mode!!!
Whenever something like these happens to you this is the hard way to put your excalibur/dash in bootloader mode:
1. Take out battery and sd card;
2. Plug your USB cable to your PC (not yet to the phone)
3. Press and keep holding the SIMB. key (the one with the camera next to the space bar)
4. Plug your USB cable to your phone (while still pressing the SIMB. key)
5. Voila: You are in bootloader mode!!
This was gotten for a 15 min. search in google!!
Now... I'll keep going with my WM5 to WM6 upgrade...

ETEN M600 No bootloader mode possible

Hi guys,
After update to kozhura WM 6.1 R3, I decided to return to WM 5. Thereafter I wasn't able to enter in Bootloader mode anymore. What I did is installing the
M600_CHN_0170-winxp.exe by extracting renaming temp.dat temp.bin and copy this file and USB_DL_...exe on the SD Card. After copying both files I have tried to enter boot loader mode and it wasn't able to do so. By pressing Power + Reset and releasing Power, entering boot loader is not possible anymore. I also tried to enter in Bootloader mode by running M600 update software. Screen starts flashing, white light and then restart...enter in WM 5 again.
SO I have WM5 running now, I'm able to connect to Active Sync, but the Bootloader mode is not working anymore.. screen is flashing and then M600is restarting. I cannot make any update on the Pocket PC, even original image install is not possible anymore ? I cannot install also any other image ?
What to do ? Any ideas how to recover the bootloader ?
I think that the 170 ROM somehow overwritten the original bootloader and it is not recognizing the images anymore or something like this ?
How to recover the boot loader, so i will be able to install again WM 6.1 r3 ?
add
I need additionally information about a software for low level analyzing debugging of Pocket PC's or low level settings, boot loader settings low level screen resolution settings.
i have tried to install wm 6.1 on my eten m600 ,
but after booting on block 3623,
it said ok.
and restarted
now it goes orange screen and after some moment it goes white science .
plz help me to make on my eten m600

HardSPL + MTTY, an almost bricked HTC Diamond!

I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
blanktruth said:
Ok, first of all I did not think that it was this dangerous to use MTTY!.
I followed everything and came to these lines
---------------------
Cmd>task 8
Cmd>
---------------------
But after Cmd>task 8 my device restarted immediately before the second line Cmd> appears and I panicked and disconnected my device and pushed the wrong buttons while "Touch Diamond" logo was on the screen.
Now, nothing happens. I can not start from the beginning because I can not start the bootloader by pushing Vol Down and the small red reset button...
Is there anything else left for me to try? Or should I throw my HTC to garbage?
Click to expand...
Click to collapse
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
i have the same probnlem!! with my diam300
my bootloader show not Diam300 64m but only 64M on the first position in 3color mode... plz help
Connect the Diamond and run the customruu.exe from your desktop, this should work.
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....
blanktruth said:
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
Click to expand...
Click to collapse
The only thing to do now is to flash back a stock ROM or use a custom ROM with the RUU.
Solved!...
Dom1n8tr1x said:
First of, your device is supposed to soft-reset after the "task 8" command and you should have been holding down the "Volume Down" and "Back Buttons" to begin flashing your new ROM. The whole idea of using MTTY is to format your Main Storage and flash a new ROM. Therefor you should have loaded the ROM that you wanted to flash onto your Internal Storage.
Click to expand...
Click to collapse
Thank you for your reply.
Actually I had uploaded the ROM to my internal storage, but during trying to bring my phone to bootloader mode, I formatted the internal storage...
Anyway, what I did now is, first I opened the USB Connection feature from ActiveSync, and then used CustomRUU.exe to Flash the ROM...
Everything is solved now...
Thank you very much all...
ilijan said:
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....[/QUOT
bootloader is all you need to revive the phone
connect it to usb in bootloader mode and just install an oficial diamond rom from an windows xp pc.
it's easy
Click to expand...
Click to collapse
plz write here step by step guide how you solved
How it was solved...
ilijan said:
plz write here step by step guide how you solved
Click to expand...
Click to collapse
Actually the most crucial part was to bringing phone to boot loader mode. And I think I managed that by pushing the Volume Down and Back (the arrow pointing left) buttons immediately after restarting my phone. And I had to do this after taking out the battery and putting it back after 5 sec.
When I pushed these buttons at the start up the phone tried to install the ROM from my internal storage, but as I explained I had deleted it by mistake. Therefore it could not find the ROM. I disconnected my phone from my PC and the screen started to say something like Retrying USB connection or waiting for USB connection, something like that.
I restarted my PC in Digitally Signed feature disabled by pressing F8 during start-up. Reconnected my phone to PC (the screen of the phone was still blinking as waiting or retrying usb connection). And voila the phone screen changed to boot loader mode...
The rest was easy. I opened the USB connection feature from ActiveSync and used CustomRUU.exe with a ROM to flash my phone...
That is all...
1. plug phone in to computer in bootloader
2. run customruu or stock from rom update on computer
3. wait for rom to flash to device
4.???
5.profit
but my booloader dont show model ID: DIAM300 64M what i had befor
and show me only: 64M
and any flash error with invalid model id, i canot flash, rom, stock rom, or hardspl...
understand me.. im not totaly noob... i used mtty X times... but now have this probles
can somebody help me?
my diamond dont have model id...
before i had in bootloader mode DIAM300 64M model id, but now i havent got... its show only 64M,
every rom flash stopped at 1% cose model id error,
every hard spl falsh finished 100% but after flash when device restart write model id error...
i cant do anithing... can somebody help me?
For everyone facing problems after flashing his/her device, take a look at the link in my sig.
There you can find a guide to restore your diamond.
you dont understand me..
i canto flash any rom any hard spl becous my diamond dont have device ID...
in bootloader dont show DIAM300 64M but only 64M
after all flash say error mobile ID...
i try mtty, hard reseted, soft... and nothing
after start its show me only first stock screan, the red text on the right bottom sight dont start: 1.17.25.14
2.100000
geny d2x
its maybe wrong but i forgot what waz here...
how can change device model ID? form 64M back to my stock DIAM300 64M?
Try another version of Hard-SPL, some people report that 1.40 not fully works.
I suggest you try 1.94 Olinex.
my diamond is death... if somebody know how can heal it... plz write me...
my device ID is missing... so i cant flash any rom, any hard spl, any radio...
try this? http://forum.xda-developers.com/showthread.php?t=409425&highlight=invalid+model+id
im not sure but i dont think one can brick his/her phone after hard spl, thats the reason of hard spl in the first place that u dont brick it. boot loader is always present
Guide
if you are using Windows XP try the following steps:
Connect your device to your PC
In Active Sync > connection settings > check Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.
Guide
if you are using Windows XP try the following steps:
Connect your device to your PCIn Active Sync > connection settings > check
Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.

[Q] Bricked Artemis - can enter bootloader

Hello,
a friend of mine probably bricked his Artemis. He tried to flash, but did not HSPL first. Now the device can enter only bootloader. I tried many USPLs, MTTY, micro SD but nothing worked.
The version of SPL is 1.14, active sync does not go green after connecting, but if I try to flash, it is recognized and returns Error 300. I guess I need the original ROM, but it was in czech and I cannot find it anywhere.
Any ideas are very welcome.
Thanks in advance.
parizek said:
Hello,
a friend of mine probably bricked his Artemis. He tried to flash, but did not HSPL first. Now the device can enter only bootloader. I tried many USPLs, MTTY, micro SD but nothing worked.
The version of SPL is 1.14, active sync does not go green after connecting, but if I try to flash, it is recognized and returns Error 260. I guess I need the original ROM, but it was in czech and I cannot find it anywhere.
Any ideas are very welcome.
Thanks in advance.
Click to expand...
Click to collapse
for SPL Artemis you can try this and to l his official ROM you can look at -> http://www.shipped-roms.com/index.php?category=windows mobile&model = Artemis​ but first try to him that your friend's device hardreset !! like this way :To perform a hard reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
thanks for ideas. HR cannot be made - returns error like "cannot format partition".
On the shipped ROMs site I cannot download anything - it only says something about redirection on ppc geeks
Here I attach the screen, what I get after trying to flash..
...
only the original rom will bring your device back to life.
whats your red numbers and letters at device start-up?
I can get only to bootloader, so the IPL : 1.14.0001 and SPL 1.14.0000 , that's all I can get
hmm, after a communication with official HTC servise in Czech Republic I got the number of original ROM and successfully downloaded it.
But still the same issue. Is it possible, that Bootloader is corrupted ? The guy told me that it is the only possible cause, if this ROM does not work
...
Try this original rom..
The bootloader of this rom matches yours..
(1.14.0000)
1. Put device into bootloader
2. Connect device to PC
3. Run the RUU
4(a). If this does not work, then you are stuck in the mud..
4(b). If that original rom does work, then click here for USPL 1.11.CMON
Good luck!
Rn
Hi,
thanks man for all the ideas. Unfortunately the ROM you are hyperlinkinkg I have already tried with no success. I have given it maximum, now I am giving it up.
Thanks for your patient help.
p
ME to in same problem plz help IPL 3.04.0001 and SPL 3.04.0000

Categories

Resources