XDAiis WM6 frozed???Need Help - Upgrading, Modifying and Unlocking

Good Days To all Guru,
Help Needed. i'm using o2 XDA iis powered by WM6, it's been workin fine & stable until last week it frozed at the WM6 greenish startup screen & refuse to go further & bootup the XDAiis. Thus i'm not able to use the HP at all.
Hv tried hardreset, removing batt but to no avail.USB,IR &COM all fail to work as WM6 on hp doesnt start.
Any1 encountered same issue & know how to solve it? pls help.
my email [email protected]
R1.15.00
G1337.45
D5.60.00 WWE
rgds
needy

Related

Boot problem when using today plugins like SPB Pocket Plus

Whe I use any of the today plugins like SPB pocket Plus most of the times after a soft reset the PPC freezes... It may needs 10 soft resets to work again!!!
Any help with this would be really appreciated...
Qtek 9090
Rom:
1.22.00 WWE
Ext ROM:
1.22.167 WWE
I know people with I-mate roms with no problem!! Should I put I-mate's rom??
I have the same issues..
I just stopped using those programs for that reason.
MS VOICE COMMAND 1.0 was bad for that too.
So I am not the only one!! :? :? :?
That's damn bad!!!
I've read this on the SPB site.. That the HTCs have this problem!! :x :x
The only solution is before a soft reset to remove the programm from the "today"... :twisted:
Are you using battery pack as well?
I had the same problem on my qtek9090.
I have done a hard reset and have installed all my programs one by one, but first SBP.
Than i have testes to istall Battery pack later on as last one and .....
no problems anymore. But why use Battery pack if you use SBP? So i de installed Battery pach.
Everything is working fine now for the last months.
Andre le Fevre
I tried them one at a time of course..
With SPB now you don't have a problem? It was the first programm you installed? What do you have it to show on the today screen? Apart from the program shortcuts?
ROM version?
I have had no such problems with my Qtek 9090, from the first ROM that it came with to the one I'm using now. I use PocketPlus 2.2 and T-Agenda, and it works perfectly.
i am using Tweak 2.41, Pocket Plus 2.2 and Pocket Hack Master 3.05. The results are that, although they are enhancement tools, but will slower my XDA IIs sometimes.... Therefore, they are not as stable as I expected. As a result, I removed them... Now, my machine work great and response fast (but two of ten times are slow especially I turn it on after few hours).
I think this is a rom dependent problem.

is the i-mate pda2 rom more stable than the xdaiii o2 uk rom

hi all!
i've got a very unstable xdaiii o2 uk
is the i-mate pda2 rom better?
i hope someone can help me cause its very frustrating!!!
thanks
Fantomas
personally, i found it better
Where can i find the latest i-mate rom????
I've found it better - though not significantly at least the lockups are less.
You can download it via:
http://forum.xda-developers.com/viewtopic.php?t=23736&highlight=pda2+imate
Cheers
Ant
thanks Jim and Anton!
an other thing, i'm getting lock ups with tomtom 3+ BT GPS. i know about the turn off phone method to stop locking but whats the point of having a pda phone edition then! so its got to be an other solution!
does the pda2 rom stops the above problem ? cause the radio version on the pda2 is higher! by the way i've already uninstalled o2 stuff!
or should i hard reset and go corporate on xdaiii (to see if lockups stops) before changing over to i-mate rom?
lastly! are the programs on the PDA2 excatly the same than xdaiii? (i mean all programs identical)
thanks again!
i'm impressed with this forum and all of you on it!
Fantomas
On TT3 I found lockups dropped substantially once I'd hidden the POIs - have you tried this? TT5 (now that I've added the POI and the 5.10) seems a lot better.
Some programs are not included like in the O2 version, but then also some things are included in the ROM as standard like the fax viewer, and also a copy of Skype. CallerID and MMS programs are still there as they're integrated into the ROM.
Ant

Upgrading O2 XDA Exec to JasJar WWE

I have recently purchased a new O2 XDA Exec.
I would like to load up the JasJar firmware onto my XDA so that I wouldn't have any O2 software on it. As I am new to all this, would it be possible to help me work out how to do this step by step.
Thank you very much for all your help.
Tom
Why do you want to do this, the Jasjar rom is as buggy as hell.
True. I agree. I had an MDA Pro, rigged it with a Jasjar rom, and I now have an Exec, and I would be inclined to say that even the MDA Pro rom is more stable than the Jasjar one.
Well the thing is I don't really want any specific phone software on my phone, I just want windows mobile 5, but still being able to phone people and view webpages on my 3g connection. I thought that is what the jasjar rom is, is there a way of just having windows moible 5 and non of the o2 stuff at all, that inculdes the o2 icon at the top of the menu.
I'd go for corporate mode then. Just select corporate and type 0506 before the timer runs out.
that is what I have atm, however I just want the standard windows mobile 5. Also is it possible to remove the o2 logo and the o2 batty battery meter?
thanks agin.
that is what I have atm, however I just want the standard windows mobile 5. Also is it possible to remove the o2 logo and the o2 batty battery meter?
thanks agin.
that is what I have atm, however I just want the standard windows mobile 5. Also is it possible to remove the o2 logo and the o2 batty battery meter?
thanks agin.
hi
hard reset ur exec and opt for corporate mode ( pin no 0506) while customisation is going on and before timer runs out, as mentioned by another member.
then
U will be hunting down forums to get a O2 battery meter as it will remove all o2 stuff
hope it helps
Jatt
hey guys, sorry for posting so many previous replies, yer, I got it to work, see I have been using a different code, the 5210 code, and that coperate code still has all the o2 stuff however the 0506 cooperate code doens't have any of that, thanks for the help guys, very much appriciated.
Tom

HELP ... trouble with my O2 xda IIs

dear all ...
with all my gratitude, please help me solving my problems with my O2 XDA IIs ...
they are :
1. QWERTY keypad does not respond, though the backlight is still on. How to overcome this ??
2. The del/backspace button on my virtual keyboard/letter recognizer ... also does not respond, so that i can not del the text i am wrong typing.
First, I have WM2003SE, as the default OS when the problems bothered me. Then I upgrade it to WM6 with Helmi's ROM, but the problem won't disappear ...
Thanks a lot in advance ...
the keyboard connector might be faulty , what you can do is open up the whole BA, adjust the keyboard ribbon and see if it works, if not, then change a new keyboard. btw i dont know why your touch screen wont work.. try re-aligning procedures.. if not download a new keyboard plugin to try..
Hey Man,
I'm trying to load WM6 by Helmi to my brand new IIs. I've tried using the same downloaded ROM that worked on my SX66 about 6 weeks ago, but I get errors: "Wrong country code" or "Image not designed for this device"
Please Help
Got It!
Had to use the "MaUpgradeUt_noID.exe"

my phone does not work : no service

I just upgrad my BA to WM5 with Helmi BA WM2K5 AKU .5_v1.4CF2. everything works fine up to yesteday. I was able to call and received phone call
my battery was off and when I restart my BA, the icon indicate no service. in addition I can not sync my BA anymore only as guest (I use act sync 4.5).
I look to some other old thread and notice that happen to some others BA owner in the past. does someone have a solution or something that I can try.
My BA is an O2 XDA IIs, and I live now in France. I was able to use my phone with WM2003S.
I am in France and I use Orange.
can anyone help me with this. I would like to keep using WM5 if possible.
current configuration
R 1.15.00
G 1337.45
rom version 5.04.10.WWE

Categories

Resources