Develop Bugs

Solution for Navman GPS

Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias

i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer

This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work

Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer

Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds

I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...

it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer

Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse

Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas

I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse

I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.

The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.

navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe

rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris

Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin

Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks

PDA2k; how to send file via Bluetooth

is there a way to send files through Bluetooth on PDA2k??

I have the same problem also, I can only send business cards and appointments.

PDA2K Bluetooth File Send
hi guys
just got my pda2k i use resco file explorer and there an option there now'just sent a video clip to my pc and it worked here the cab file its the lastest version as i dowloaded it last night---its a demo
Hope it helps
freelockuk

i have downloaded ur attached version of resco explorer and tried it; i have also tried various versions of Resco Explorer with different bluetooth devices (phones, PDAs, PCs etc) but i always get the following error:
"the connection to the peer bluetooth device failed"

the beam file screen doesn't seem to work..in resco explorer it works, but the devices must be paired crap..

have you paired them both first?

that's the point..u shouldn't be required to pair the devices, like nokia phones, u can send files without pairing..
Besides, using default file manager and chosing beam file doesn't work at all...bug?

yes they are paired, but still the file doesn't get beamed from PPC to PC
this sure is a bug or a limitation of Bluetooth in PDA2k.

to send to the pc you must go to bluetooth manager->new->Browse files on a remote service, then chose your pc, and select send file.
What i want to know is that if we can send images and other files using object push (like the 9090 does for contacts, appointments and tasks), i.e., without requiring the pairing of the devices

d3vil said:
to send to the pc you must go to bluetooth manager->new->Browse files on a remote service, then chose your pc, and select send file.
when i try this, it says: "Service Discovery was unsuccessful".
What i want to know is that if we can send images and other files using object push (like the 9090 does for contacts, appointments and tasks), i.e., without requiring the pairing of the devices
Click to expand...
Click to collapse
my imate PDA2k doesn't even send contacts, appointments and tasks using object push. it can't find my PC in 'Object Push Servers'. and when i select all devices and chose my PC it gives me the following error: "The Remote device does not allow contact items to be received".
is it because of XP SP2???
how do i enable Object Push Profile in XP SP2?

Guys, I can send files over BT from my Qtek-9090 to my friends iPAQ 1940, no problems at all !, well try this version it might help.

@FFVIII: I haven't tried yet to another ppc, but using resco explorer it fails sending to the pc..

OK, My Problem IS SOLVED!!!!!
i uninstalled XP SP2,.., back on the Widcomm bluetooth software and everything works again, PC to PPC or PPC to PC.
will check it now again with other PPCs and Phones.

problem in Beaming(ing) using i-mate PDA2K
I am using i-mate PDA2K with Windows 2002 but I couldn't send any bluetooth
message so far?
i use the file explorer to browse the vailable bluetooth devices near to me
but it's just showing Searching and nothing happens after that?
what is the problem?

problem in Beaming(ing) using i-mate PDA2K
I am using i-mate PDA2K with Windows 2002 but I couldn't send any bluetooth
message so far?
i use the file explorer to browse the vailable bluetooth devices near to me
but it's just showing Searching and nothing happens after that?
what is the problem?

Sending via Bluetooth
unfortunatly MS have decided to make a massive change with the bluetooth stack on MS Mobile 2003. you can no-longer beam files via the explorer app or the beam files app. The way i've transferd file is to establish a file browsing session via bluetooth manager and then select send file. Unfortunatly this does mean the devices have to be paired and support tftp over bluetooth, but it does work. Im yet to test resco but will post when i do.

imate will lanche new update to fix this problem
now 4 updates in 2 month !!! thank you imate for pda2k

Widcomm bluetooth
buchay said:
OK, My Problem IS SOLVED!!!!!
i uninstalled XP SP2,.., back on the Widcomm bluetooth software and everything works again, PC to PPC or PPC to PC.
will check it now again with other PPCs and Phones.
Click to expand...
Click to collapse
where can i download Widcomm bluetooth software? or any link? thanks

buchay said:
i have downloaded ur attached version of resco explorer and tried it; i have also tried various versions of Resco Explorer with different bluetooth devices (phones, PDAs, PCs etc) but i always get the following error:
"the connection to the peer bluetooth device failed"
Click to expand...
Click to collapse
Hi there,
I encountered the same problem like u. I got this message everytime i send file to another ppc via resco explorer 5.13(latest). But sending file to PC desktop is ok.
So my question is can u successfully send files to ppc , phones & pda?
But how??
Thanks

Check out this thread: http://forum.xda-developers.com/viewtopic.php?t=17976&highlight= it might be just what your looking for!

Sending a file via bluetooth

Hi im new here but ive got a quick question (ive searched already) is it possible to actually send a file via BT and actually discover a device because mine neva works and also i can only do this via BT manager and setup a remote connection.
So the question is is it possible to just send a file ???
My BT version is 1 and build 3500
Thanks in advance

yeah sure, go to the ftp
ftp://xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
choose the (BroadcomCorp_BT1.0.0.3900.cab)upgrade file and copy it to the 'My documents folder' and simply tap it and it will install.
and after that, when you tap and hold on your xda, it will say send via bluetooth, instead of using beam, as that wont work...
enjoy!!!!
by the way, login and password is just XDA and XDA
and if you are using internet explorer and cant get it to work, right click and click login . then enter password and username

The only thing i can say is thank you thank you thank you, my life is so much better!!!!
Thank you once again

Bluetooth send files without pairing possible?

So I have edited the registry to receive files via Bluetooth without a passkey (though not working 100%), but I have the same "pairing" problem sending files to another computer or WM phone without pairing - . I never had this much trouble using Bluetooth with any of my previous WM devices.
What's the he** is the matter with BROADCOM/WIDCOMM??
Has anyone come across the same problem?
And is there a fix? Thx

Same here
Same issue here, since I'm a complete N00B I was hoping someone else could solve this.
Thnks

Mesquire said:
So I have edited the registry to receive files via Bluetooth without a passkey (though not working 100%), but I have the same "pairing" problem sending files to another computer or WM phone without pairing - . I never had this much trouble using Bluetooth with any of my previous WM devices.
What's the he** is the matter with BROADCOM/WIDCOMM??
Has anyone come across the same problem?
And is there a fix? Thx
Click to expand...
Click to collapse
I don't have troubles sending files to another un-paired device(no passkey is needed of course).
The "Authentication required" box(in Bluetooth setting) in my Touch Pro has been unchecked, and it will auto receive files sent by my TP2 without asking for a passkey(not paired yet).
Same when send to my laptop, the only thing I need to do is to confirm to receive the file on my laptop, and it's done.
Try this reg hacks, hope it works on your TP2:
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Services\0003]
"Encryption"=dword:00000000
"Authorization"=dword:00000000
"Authentication"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Applications\0005]
"Encryption"=dword:00000000
"Authentication"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Applications\0004]
"Encryption"=dword:00000000
"Authentication"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Services\0002]
"Encryption"=dword:00000000
"Authorization"=dword:00000000
"Authentication"=dword:00000000

jzhyok said:
I don't have troubles sending files to another un-paired device(no passkey is needed of course).
The "Authentication required" box(in Bluetooth setting) in my Touch Pro has been unchecked, and it will auto receive files sent by my TP2 without asking for a passkey(not paired yet).
Same when send to my laptop, the only thing I need to do is to confirm to receive the file on my laptop, and it's done.
Try this reg hacks, hope it works on your TP2:
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Services\0003]
"Encryption"=dword:00000000
"Authorization"=dword:00000000
"Authentication"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Applications\0005]
"Encryption"=dword:00000000
"Authentication"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Applications\0004]
"Encryption"=dword:00000000
"Authentication"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\Services\0002]
"Encryption"=dword:00000000
"Authorization"=dword:00000000
"Authentication"=dword:00000000
Click to expand...
Click to collapse
I have been using these parameters since day one since I even had trouble receiving files from my computers with the initial suggestion of editing the entries under Services\0002, so they are not working for me.
I can't even send images to my D810 or Touch (Enhanced) or computers without being prompted to pair with TP2 - these two have never given me any problem sending/receiving files via Bluetooth.

error with bluetooth S620

hi everybody. I have an error with bt in my excalibur. I can use file explore to sent a file via bluetooth(beam). But I can use Ressco Explore to sent. and I cant sent file to blackberry using Resso or default explore .( I can receive files from BB, when beam to BB, My BB "turned on receive using bt" but My excalibur cant found device).
so what can I do to fix it? I have trie any rom, but it have no change. Pls help me.
( sorry if My English is not fluent)

nobody help me?

i have the same error but just to let u know the problem to me only happen withc blackberrys but i cant receive any file throught bluetooth i have to use bluetooth explorer to take a file so i am also waiting for an answer

up for anbody know....

i think you are using lovebabyjing's wm6.5 which is a wonderful rom but has some issues with bluetooth. yes you can receive files from other device through bluetooth. after you activate your bluetooth and set to discoverable you also need to check the beam from the connection settings then it can already receive. just try and wish you luck...

ok i think that the problem is with bb bc i have try with other brands and mines right now is working i get an error saying like obex is not ready or not compatible also please be sure that when you are receiving the bt file from a bb you have to go to the media payer and then meny and go to the option that said receive file or something like that i do that but get an error

my problem is sending files to the bb

cbroce3012 said:
my problem is sending files to the bb
Click to expand...
Click to collapse
Me too........