Develop Bugs

WAP Browsing Black 2.5

Guys,
Since upgrading to Black 2.5 I've found a problem with WAP browsing with Internet Explorer which was not present with Black 1.2. So for example, if I try to connect to WSP://wap.mysite.com my connection is blocked by my operator (They only allow connections via port 9201 and 9203 on their WAP APN). I've correctly set-up a proxy on my device to use port 9201 for WAP and 9203 for Secure WAP and so I believe IE is probably using the wrong destination port.
Has anyone else come across this problem? Any workarounds/fixes? Maybe a registry change somewhere??
Cheers,
Tony

Does your network use a different wap apn?

I have had a similar thing happen with black 2.5
I have entered in all the details for the carrier.
I have tried with and without the proxy. I have also tried the 3G and GPRS APN's and they all time out.
Its not a big deal to me as most of those WAP sites supplied by carriers are not worth looking at anyway.

lost my 02 settings after upgrading to WM6

I recently upgraded the rom to WM6 on my universal but in doing so i've lost the connection settings enabling me to connect to the internet via my 02 (uk) provider.
Can anyone point me in the right direction for getting them back.

aRTE YOU ON CONTRACT OR PAY AS YOU GO?

Wright me in to private, or i might miss you reply...

Hopefully it helps!!!!

Cheers optika it did help but the info was missing the bit about "myisp" , i've done a little bit more digging and found the settings which i'll post below in full, just in case others have the same problem as I did
__________________________________________________
My ISP
Add a new modem connection
Name: Mobile Web
Modem: Cellular line (GPRS, 3G)
Access Point Name: mobile.o2.co.uk
username: O2web (not sure on case sensitivity - I have cap on first letter O)
password: password
Click Advanced:
move to servers tab
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
My Work Network
Add a new modem connection
Name: O2 Active
Modem: Cellular Line (GPRS, 3G)
Access Point Name: wap.o2.co.uk
username: o2wap
password: password
click advanced: both tabs should be set to use server assigned
click ok
My Work Network
Click Set up My proxy server
check 'This network connects me to the Internet'
check 'This network uses a proxy server to connect to the internet'
leave proxy server blank
click advanced
Click WAP
Server: 193.113.200.195
Port: 9201
username: o2wap
password: password
click ok
__________________________________________________

tom tom 6
i recently changed the rom on my xda orbit from german to english. but my tom tom is not there nomore however i have another tomtom 6 but no activation code for it.
is there a way fo getting arround this

cotc2001 said:
Cheers optika it did help but the info was missing the bit about "myisp" , i've done a little bit more digging and found the settings which i'll post below in full, just in case others have the same problem as I did
__________________________________________________
My ISP
Add a new modem connection
Name: Mobile Web
Modem: Cellular line (GPRS, 3G)
Access Point Name: mobile.o2.co.uk
username: O2web (not sure on case sensitivity - I have cap on first letter O)
password: password
Click Advanced:
move to servers tab
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
My Work Network
Add a new modem connection
Name: O2 Active
Modem: Cellular Line (GPRS, 3G)
Access Point Name: wap.o2.co.uk
username: o2wap
password: password
click advanced: both tabs should be set to use server assigned
click ok
My Work Network
Click Set up My proxy server
check 'This network connects me to the Internet'
check 'This network uses a proxy server to connect to the internet'
leave proxy server blank
click advanced
Click WAP
Server: 193.113.200.195
Port: 9201
username: o2wap
password: password
click ok
__________________________________________________
Click to expand...
Click to collapse
Setings i sent you were from O2.
i did not change anything..
helps me all the time.

daveonfire said:
i recently changed the rom on my xda orbit from german to english. but my tom tom is not there nomore however i have another tomtom 6 but no activation code for it.
is there a way fo getting arround this
Click to expand...
Click to collapse
have you kept code from before???
If not go in to my folder...
below

MMS settings on TyTn/Hermes for Suncom

I am sure that this has been posted already, but I have not been able to find my answer yet.
I am trying to get my MMS settings to work with suncom's service, here is my problem i think?
Suncom uses port 9201 and WAP 2.0 - when i set to port 9201 i get a default of WAP 1.2 and when I set to WAP 2.0 I get a default port of 8677.
Can someone please tell me how to change the port settings on the Hermes running WM5....I also have the same issue with an S710 running WM6.
Thanks in advance for your help.

standard proxy settings

hi,
i am new to windows mobile. i am trying to connect to internet using my mobile over bluetooth/wifi. I can connect to active using either of them.
To access internet we have to use a http proxy with authentication for internet & specify 'no proxy' for internal websites.(for browsers)
in windows mobile, where should i specify these settings? I went to settings--> proxy and added http proxy, but couldn't figure out those 'connect from' work, wap etc. (connect what from what?)
i can access internal websites. using kavana's wm6.1

pay for unlimited web like the rest of us..i pay $30.00 every month for mine
and if everyone was paying for the unlimted internet maybe it would be cheaper than these people trying to set up proxy's

F$#k Proxy hack
If that's the way you want to go I suggest do a search/or google it 'cause I agree with hovax, the more people hack proxy's the more money we have to pay for our unlimited plans. I'm not speaking for everyone , but I know a lot of people here pay for their plan, rather than steal it.

well, i am from india. the plans we have here gives too low speed (10 to 15kbps) not worth it

timepassman said:
well, i am from india. the plans we have here gives too low speed (10 to 15kbps) not worth it
Click to expand...
Click to collapse
s**t outta luck

hi i have the 20.00 unlimted internet plan. is there a better proxy setting for the dash? because sometimes all the applications (sky fire, PIE, flick) refuses to connect to EDGE

okay im going to breakdown US only i dont think india has this
WINDOWS MOBILE 6.1 INTERNET SETTINGS!
ok first of all both of you guys that posted settings, they will work for the older versions. Good job for that cuz of the million tmobile phones I used that on!
Here are the settings for WM6.1
settings
connections
gprs
edit the existing T-Mobile Data with the following
connects to: wap network
access point: wap.voicestream.com
username and passwork: (leave blank)
authentication type: none
primary dns: 216.155.165.50
secondaty dns: 0.0.0.0
ip address: (leave blank)
now go back to connections menu
select gprs
select New...
name: tmobile gprs
connects to: wap network
access point: wap.voicestream.com
user name and password: (leave blank)
authentication type: none
primary dns: 216.155.165.50
secondary dns: 0.0.0.0
ip address: (leave blank)
now go to proxy from the connections menu
add new proxy
name: tmobile proxy
connects from: wap network
connects to: the internet
proxy (name port): 216.155.165.50:8080
type: HTTP
username and password: (leave blank)
now go back to the connections menu
click menu
select advanced
set all connections to automatic
now open IE
click menu
select tools
select options
select connections
check automatically detect settings
select network: wap network
I know you shouldnt need to GPRS accounts but for some reason on certain WM6 phones it ONLY works with both, doesnt matter if you have one or the other it wont work unless you have both (on certain phones), mine as well just put it all in, wont hurt anyway
P.S., this was all tested on 4 different t-mobile dash phones
Edge and IE work fine on any of the T-Zones plans with these settings on the dash just pop them in to Settings / Connection /
http://www.htcwiki.com/page/The+Dash+FAQ
NEXT TIME DO SOME RESEARCH GOOGLE IT OR USE THE SEARCH FORUM ABOVE^^^^ and maybe you wont have to ask stupid questions. most of this stuff is already on the web you just have to SEARCH
if it's not on the forum look at some other sites because most likely there's people like us that's had this problem before and solved it already.

there is already a tread regarding it
http://forum.xda-developers.com/showthread.php?t=374413

Tilt2 Proxy Config for outside USA (Att)

Hi everybody,
Sorry for the question but for 3 days i tried to find the correct configuration for my Tilt 2 Att.
I need to know how cab or what registry change for that my Tilt2 work well outside USA (att). The Opera browser display that have a problem with a proxy (have a different provider att). Have "disable proxy" in my configuration but still have a problems.
Thanks for your help...

have you tried remove hidden proxy? there are a few cabs floating around.

psyopstt said:
have you tried remove hidden proxy? there are a few cabs floating around.
Click to expand...
Click to collapse
Need connect to Internet through Opera but the browser show me a message that is not possible becouse the proxy. Already run the .cab for Disable Proxy but the problem still persists.

Well you can remove all the proxies you want and that wont help until you enter a new modem connection for it to connect with. It is set up to connect to ATT and as you are not on ATT it wont.
What carrier are you using? They all have specific settings. Once you input them and disable the proxies that tells Opera to use the ATT connection you should be fine.
Info should look like this
Name: Rogers Media
Access Point: Media.com
user name: wapuser1
password: wap

InRBigness said:
Well you can remove all the proxies you want and that wont help until you enter a new modem connection for it to connect with. It is set up to connect to ATT and as you are not on ATT it wont.
What carrier are you using? They all have specific settings. Once you input them and disable the proxies that tells Opera to use the ATT connection you should be fine.
Info should look like this
Name: Rogers Media
Access Point: Media.com
user name: wapuser1
password: wap
Click to expand...
Click to collapse
Thanks InRBigness, I use Entel (Chile, Southamerica).. i will try, but i dont know which registry key need edit for change Opera proxy.. you know?
thanks

Until you set up the data connection it will not work at all. Once you have the data connection set up then there is a cab that disables the proxy on Opera as well as a few other things like running in the background.
You also have to edit the opera.ini file so that it does not look for the proxy automatically. You can change it but unless you edit the .ini file it will not stick.
Set proxy to 0 in windows/opera.ini
[Proxy]
Enable HTTP 1.1 for proxy=0
HTTP Server=0
HTTPS server=0
Use HTTP=0
Use HTTPS=0
Use Proxy On Local Names Check=0
Then save and put back in your windows/opera directory.
here is some more info on the .ini : http://forum.xda-developers.com/showthread.php?t=597539&highlight=opera+proxy+settings

InRBigness said:
Until you set up the data connection it will not work at all. Once you have the data connection set up then there is a cab that disables the proxy on Opera as well as a few other things like running in the background.
You also have to edit the opera.ini file so that it does not look for the proxy automatically. You can change it but unless you edit the .ini file it will not stick.
Set proxy to 0 in windows/opera.ini
[Proxy]
Enable HTTP 1.1 for proxy=0
HTTP Server=0
HTTPS server=0
Use HTTP=0
Use HTTPS=0
Use Proxy On Local Names Check=0
Then save and put back in your windows/opera directory./QUOTE]
OK.. I edit Windows/Opera/Opera.ini this
Original Proxy
[Proxy]
HTTP Server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP=1
Use HTTPS=1
Enable HTTP 1.1 for proxy=0
Use Proxy On Local Names Check=0
Correct Proxy
[Proxy]
HTTP Server=0
HTTPS server=0
Use HTTP=0
Use HTTPS=0
Enable HTTP 1.1 for proxy=0
Use Proxy On Local Names Check=0
and until this moment work well... Thanks.. I will probe the connection 24hrs for close this issue. Thanks!!
Click to expand...
Click to collapse