Hi everyone,
I bought trinity a couple of days ago and I found out that it was SIM locked.
Can somebody here help me to tackle this issue if there is any tool for unlocking SIM?
I did see on the forum that there were such threads for other HTC model but I could not discover anything regarding Trinity's SIM unlock.
Many thanks to all who help me.
SPV-M700 from provider "Orange" (The Netherlands)
Hi everyone,
I also face the same problem as Bobbb only with the exception that my trinity already was flashed to WM6 when I bought it. Today I tried to unlock the provider's "Orange" simlock without success. According to the company which tried to unlock the simlock I should undo the flash (WM6) and restore the original "Orange" (WM5?) configuration.
I wonder whether all of this is necessary and if there is a tool or software which can unlock the simlock even after the phone has been flashed to WM6.
Hopefully someone can help me (us) solving this problem?
Just like Bobbb said: Many thanks to all who help me (us).
http://forum.xda-developers.com/showthread.php?t=293957
Hi all,
i had recently upgraded the WM6 on my MDA compact 3. everything was good however, i could not able to get the TOMTOM 6 working.
does anyone had experience on this? and got TOMTOM working? if do, which version and where to download?
or if the worst case. please someone help to tell me how i can go back to T-mobile ROM?
many thanks to all
Hi!
I have installed the O2 WM6 Rom on my MDAcIII. The TomTom build in the ROM works for me! I only copied my Card to the SD and registered it, thats all!
Greets
KobiP
hi KobiP,
thanks for reply. which and where do you get the rom build in TOMTOM? can you suggest the link please?
thanks
OK, I have first CID-Unlocked my MDAcIII, then I have installed the WM6 Update of O2 Germany.
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
After the Update, the branding and TomTom gets installed.
hey KobiP
listen mate - just got me a MDA compact III on t-mobile.
I have tried Lowitz utlity - no joy their !!!
There is someone who says they can unlock the SIM but not CID .
I really would like to use my Orange pay montly contract SIM but its SIMlocked - I am tempted to get it unlocked via IMEI-unlock.co.uk
Any advice how u unlocked your - cheers !!!
peace
tli
tli said:
listen mate - just got me a MDA compact III on t-mobile.
I have tried Lowitz utlity - no joy their !!!
There is someone who says they can unlock the SIM but not CID .
I really would like to use my Orange pay montly contract SIM but its SIMlocked - I am tempted to get it unlocked via IMEI-unlock.co.uk
Any advice how u unlocked your - cheers !!!
peace
tli
Click to expand...
Click to collapse
Sorry, I don't understand what you mean. CID Unlock means that you can Install other ROMS on your Phone, SIM-Unlock means that you can use no other SIM-Card. The MDAcIII is NetLocked, so you can use just T-Mobile cards.
If that wasn't your question, please ask again
Hello everyone...I am new to this...
I have newly purchased a pure white SoftBank X02HT...
It is my second WM phone...
and it is the first time I ever think about modifying it...
I bought it in Toronto, Canada... The phone has already been modified...
and unlocked...right now it is knowing itself as a Dopod C730...
it is currently a Traditional Chinese/English...
however...there are still many parts that are English only...
I have no problem reading English...
but then there are songs that I would like to have in Chinese...
also...it does not have Chinese input...I really want to know...
how can I put in Chinese...
but more important... my camera is not working...
when it turn the camera on...it tells me...
Unable to initialize camera. Failed to set up the camera device...
what do I do about that...?
also are Dopod C730...HTC S630...and SoftBank X02HT all have a different keyboard layout...? becuz right now there are some keys on my key pad...that does not match...it is not the English characters...but a few signs...
I would like to make it back into a X02HT or S630...but I don't know how to use any of the Roms...so please can someone help me...?
Thank you very much...
yes please
have a similar situation here.. I have an unlocked x02ht with the dopod730 rom and would like to install the Softbank ROM so I can use all the Softbank mobile features... but 1. where to get the rom 2.what is necessary to install it?
me too we need some tutorial plz help us
looks like we're all in the same boat though all the functions on my softbank work. I'm using mine on Rogers GSM [Canada]
Yes!
I had Softbank, turned it into DOPOD C730 to unlock and use outside Japan. Now I lost the softbank access point password.
I'm totally lost too ...
Mine start, but over 40 seconds after boot, this message ( appears and i can't use the cellular "SIM lock. You can still make emergency calls if you service provider supports it"
I've tried with 3 different SIMs and without SIM and i get the same message....
I think that installing a new software maybe will fix it, but ... i don't have any idea of how could i do it.
caza00 said:
I'm totally lost too ...
Mine start, but over 40 seconds after boot, this message ( appears and i can't use the cellular "SIM lock. You can still make emergency calls if you service provider supports it"
I've tried with 3 different SIMs and without SIM and i get the same message....
I think that installing a new software maybe will fix it, but ... i don't have any idea of how could i do it.
Click to expand...
Click to collapse
me i have one i need english rom
drphones said:
me i have one i need english rom
Click to expand...
Click to collapse
You can download ROM WM6.1 or WM6.5 WWE for HTC Cavalier via http://forum.xda-developers.com/showthread.php?t=520756
Hi everyone,
I picked up the Softbank X02HT but it came with the Chinese ROM.
Since I'm using it in Japan, I'd like to switch over to the Japanese ROM.
I wasnt able to find the Softbank Japanese ROM anywhere online... perhaps someone had a suggestion?
Thanks for your help!
also very much interested in that
i am in a similar situation and already posted several requests about switching my Dopod ROM to a Softbank one or at least get all the important functions of the Softbank ROM working on my Dopod 730...but so far no reply.
if you receive any enlightenment please share it with me.
cheers
beefandcorn,
Im in the same boat as I picked it up in HK to use here in Tokyo
kinda ironic how it was setup to use here and now it only partially functions.
I cant seem to find a ROM anywhere for it as well
some of the settings from the X01HT will work.
Im tempted to go to softbank and get them to reflash it back but i have a feeling ill get busted for having an unlocked one.
The keyboard layout is f'd up not all the keys match, I can send SMS but cannot receive, and I cannot access internet via 3G...
What is your experience like so far in Japan for the dopod rom?
Using foreign ROM on Softbank network
Actually, I’m also using the HK ROM on the Softbank branded X02HT in Japan.
SMS and 3G Packet service works okay but it seems the MMS is impossible to get working.
Just to confirm, here are my settings for internet access.
In “Connections”, I have a connection that “Connects To” “The Internet”.
The access point is “softbank”, the username is “[email protected]” and password is “softbank”.
In “Proxy”, I didn’t have anything setup.
This is the paid packet service, where you pay per use.
I think you also need Softbank to have your plan include “packet service”.
It looks like you can also setup the flat rate internet service but I haven’t tried that.
Sorry, I’m not sure about SMS issues.
Is it possible to dump the ROM from a retail Softbank X02HT?
Then, we could flash the official ROM onto the phones and all the problems go away.
Hope it helps…
i agree
yes if somebody could provide a ROM dump of the softbank rom that would help... well also need to figure out HOW to flash it then...
The company I bought my phone from (mail order from the US) offered me to reflash the phone to the Softbank ROM but it is not cheap and I also would need to send it back to the US for that (and pay for the DHL/UPS costs)
So I would prefer doing it myself (if its not such a hassle)
Yea. I got my X02HT in HK, and although everything works fine here on AT&T, I'm having an issue with remembering where some of the symbols are.. since some of them don't match up... any luck finding the Original ROM?
It seems that the original Japanese ROM also has English. and I would assume that this ROM maps the Keys correctly... as opposed to the Dopod ROM installed now...
Please HLP w/ Tmobile WIZA200 in JAPAN...cant get signal
I'm starting to think there is no solution I have unlocked and uploaded and reloaded and re-unlocked, etc but still the same problem...My phone can not access the cellular network. I did a manual search and my phone does not acknowledge the JP Softbank network. I have put different kinds of ROM's and OS upgrades, etc, but still no success. I'm starting to think that these great unlocked PDA's only work in Europe and North America and not in JAPAN.
I have seen several other threads with others having the same problem so I am going to try to ask this question in several different threads.
I have no errors and everything works fine in the process, just like everybody says it does, but still nothing for acquiring a signal. It just either shows an exclamation point or searching dots. I have compared the various carrier options on my phone to other Softbank phones and everything is the same networks except acknowledging the Softbank network.
I'm praying there is some smart person out there who can figure this out...PLEASE...PRETTY PLEASE...
Works on DoCoMo but NOT on Softbank
I also have a Dopod ROM and funny thing is, the phone works like a charm on the DoCoMo Network (Phone and SMS) but when I pop in a Vodafone SIM it cannot even connect to the Softbank network
Very Strange...
we have a thread going on this issue and maybe you can add some input.
http://forum.xda-developers.com/showthread.php?p=1942813&posted=1#post1942813
I had a Softbank X02HT. Stumbled my way thru a DOPOD "cook (?)" and used it in Australia and Guam on GSM. Came back to Japan, threw in the softbank card...CHANGED THE NETWORK BAND...to Japan and AUTO. Worked perfect on DOPOD ROM. No 3G. I am working that right now.....
anybody dumped the rom yet???
This is the Softbank rom from X02HT
First Boot screen show "Test Only Not for Sale SOFTBANK" Just ignore it....hopefully when done with cooking WM6.1 with softbank rom, kindly erase that Boot Screen.....
Hopefully Anyone can make X02HT Softbank rom WM6.1.....Please share......
heres the link......
http://rapidshare.com/files/149405794/RUU_Cavalier_VF_KK_1.20.761.4_1.46.50.10_182_Test.exe
P.S.
cruzzmz really donno to upload it to ftp em sorry dude....
wowwwwwww I don't know how, but this ROM worked for me!!! The ****** SIM Locked message dissapear! Now, I can put a unlock code for my cell..... I'm going to see how (Any suggestion ?)
Thx!!!
What do you recommend me... still with this Softbank rom or install a Dopod (One from the fTP)?? I need english language!
pls wait a lill bit
ppls pls wait a lill bit more since i am on a long vacation now. ive dloaded the softbank rom. ive dump it & will cook a wm6.1 on it soon. just one catch though the chome screen will b in english i think hv to cook & try it on my dopod 1st ... will keep u all posted
cruzzmz said:
ppls pls wait a lill bit more since i am on a long vacation now. ive dloaded the softbank rom. ive dump it & will cook a wm6.1 on it soon. just one catch though the chome screen will b in english i think hv to cook & try it on my dopod 1st ... will keep u all posted
Click to expand...
Click to collapse
Can anybody tell me is it fine if i run this rom on my x02ht without running anything else first?i mean any spl thing required?any did the enter the unlock code screen really appeared?
ipratik said:
Can anybody tell me is it fine if i run this rom on my x02ht without running anything else first?i mean any spl thing required?any did the enter the unlock code screen really appeared?
Click to expand...
Click to collapse
Yeah dude! Try it, at least, it worked for me. Now I can play with the WM registry and those things that was unavaible after.
Good luck
caza00 said:
Yeah dude! Try it, at least, it worked for me. Now I can play with the WM registry and those things that was unavaible after.
Good luck
Click to expand...
Click to collapse
yes!!!!!!!!!i tried and it went with no problem. thanks for showing the way ...and atleast now there is a space to put the unlock code...good luck with your newborn x02ht. and the internet settings are also in place. so can use softbank unlimited plans...
Did you try to install another ROM, a Dopod ROM or something??
I wanna try one but i don't know if it is a good idea or not ...
caza00 said:
Did you try to install another ROM, a Dopod ROM or something??
I wanna try one but i don't know if it is a good idea or not ...
Click to expand...
Click to collapse
no. i didnt try anything else as i didnt have time and was quite satisfied with the softbank rom. but yes the network seems to be weak compared to the original rom.
Hi all.
Im trying to unlock a palm treo 500v from vodafone spain. I already flashed 3 ROMs from caramba_sda (my_rose wm6.1, 6.5.2 and 6.5.3) and the phone works well with all 3 (the vodafone skin is gone for good!) but te problem comes when i try with a different sim card from movistar. The phone shows: sim card locked from the target network. It remains locked!
Is there anything to do besides the ROM flashing? Is there a unlock code calculator for this phones? Is there any chance to unlock this phone?
Please i need some help. I already have ordered a sim card from another operator and in a few days the vodafone sim will die!!
Please help me! Its a nice phone and i dont want to leave it in the drawer, or using it as a paper weight!
Thank you in advance.
And BTW, congrats for the site, very nice.