Hi guys,
Had my HTC Touch Diamond about a month now and have tried various of ROM's on it and its been great!.....
BUT.... I have try tried installing another ROM and now when I switch it on its stuck at the first Splash screen saying Touch Diamond and a logo of a blue eye with the number 7 next to it - It stays on this and doesnt go anywhere!
Have tried a soft-reset and a Hard-reset and it just doesnt move from the first screen!!!! grrrrrrrrrrrrrrrrrrrr!!!
Any wheres of formating the phone some how without it having to be linked up to Activesync?
Any help would be fantastic!
If this is in the wrong thread - Im sorry and could it be put in the correct one? Cos help help with this would be great!
D
:-(
d3toxuk said:
Hi guys,
Had my HTC Touch Diamond about a month now and have tried various of ROM's on it and its been great!.....
BUT.... I have try tried installing another ROM and now when I switch it on its stuck at the first Splash screen saying Touch Diamond and a logo of a blue eye with the number 7 next to it - It stays on this and doesnt go anywhere!
Have tried a soft-reset and a Hard-reset and it just doesnt move from the first screen!!!! grrrrrrrrrrrrrrrrrrrr!!!
Any wheres of formating the phone some how without it having to be linked up to Activesync?
Any help would be fantastic!
If this is in the wrong thread - Im sorry and could it be put in the correct one? Cos help help with this would be great!
D
:-(
Click to expand...
Click to collapse
Did u hardspl ur device before and have u read about the upgrading process in the sticky thread, If you hardpl device just put ur device in bootloader mode and flash a different rom
Yes mate I did
But no problem I have managed to work out how to push a ROM to the device without using activesync So now back up and running!
Thanks anyways! and keep up the good work guys!
D
d3toxuk said:
Yes mate I did
But no problem I have managed to work out how to push a ROM to the device without using activesync So now back up and running!
Thanks anyways! and keep up the good work guys!
D
Click to expand...
Click to collapse
ok bro, will close this thread now since all is running for u now
Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
1. sory about my inglish... im brasilian, and i buy a excalibur in NY city...
so... wen i flashing my phone, my stupid sister take the cablle out! :O
now my phone dont work!
if i turn him on using the button (power)
him stop in the splash screen...
and if i try change the rom, they say, phone is not connected!
if i try hard reset, him stop in the splash screen...
wen i put the phone in the usb, the pc do a sound, but they dont show any thing connected! :S
HELP ME!!! >O
sory again about my inglish!
Take a look @ This. It might help.
The problem might be to find a suitable rom for your device. Read the stickies for stock rom (original rom)
Good Luck.
joeskull said:
Take a look @ This. It might help.
The problem might be to find a suitable rom for your device. Read the stickies for stock rom (original rom)
Good Luck.
Click to expand...
Click to collapse
TANKSSSSSSSSSSSSSSSSSSSS!!!!!
U SAVE MY LIFE!!!
tks again!
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
aali-01 said:
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
Click to expand...
Click to collapse
You must flash the rom using MTTY
http://forum.xda-developers.com/showthread.php?t=540290
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
aali-01 said:
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
Click to expand...
Click to collapse
There is not a perfect radio.You must flash some radios from
http://forum.xda-developers.com/showthread.php?t=470306
and check which is the best.
As for 1.20 olinex i think you must upgrade to 1.93
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
aali-01 said:
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
Click to expand...
Click to collapse
i have 1.17 official diamond radio.But in every rom you flash there is a radio that chef recommend.
http://forum.xda-developers.com/showthread.php?t=580490&highlight=RADIO
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
aali-01 said:
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=4fQE0P3diKg
This a tutorial from awran5.
Search and the first link "the definite mtty thread"
brother i have tried everything but still not able to get USB in the combobox
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
aali-01 said:
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
Click to expand...
Click to collapse
Happy that all gone well.
Thanks to xda
You have to download the official rom from the htc web site... then flash it and after that flash first the recomended radio and then the rom that you chose...
I dont know if you already know but.... rename any rom that you want to flash with this name...DIAMIMG...and then copy it to the internal storage....after that restart....and press backwards and volume down keys together and install the new ROM....by pressing the power key...
think this will help
try this will definitely work cause i have same problem too!!
read carefully and try it if u have this problem u have to use mitty everytime u flash(i think cause for me is every time i flash new ROM)
xxxx://forum.xda-developers.com/showthread.php?t=540290
replace xxxx with http
Thanks to all man. my problem is solved.
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.
please help me
i don't know what is hapend, my htc dz just reboot int htc start wait light and reboot, i have tried in the recovery mode , but i cant get it, so i have with android flasher to flash clock word no chance, i became so a problem that something fail, what i can is just in the fast boot and hboot mode and the info but recovery and fabrikreset no chance, , thanx alot for your help
the device is rooted and s-off
have you tried flashing another ROM?
xT4Z1N4TRx said:
have you tried flashing another ROM?
Click to expand...
Click to collapse
if you main that i have install a new rom bevor this problem hapend tje answer is ja it was
04/08/11]LeeDrOiD_HD PORT 1.0 w/
please help me
i need to know if the device is broken
hallo there
no bodye can help, is that all what all of you can making, just tell me is the device brpcken or There are hopeful
goliano said:
hallo there
no bodye can help, is that all what all of you can making, just tell me is the device brpcken or There are hopeful
Click to expand...
Click to collapse
Ignore, I see you have a second thread where this has all ready been suggested